Searcharxiv⌕ Search

arXiv subjects

G. Vasileiadis

Publications and source records attributed to G. Vasileiadis.

13 recordsLinked to original sources
arXiv2019

Impact of H.E.S.S. Lidar profiles on Crab Nebula data

The H.E.S.S. experiment in Namibia is a high-energy gamma-ray telescope sensitive in the energy range from 30 GeV to a several tens of TeV, that uses the atmospheric Cherenkov technique to detect showers developed within the atmosphere. The elastic lidar, installed on the H.E.S.S. site, allows to reduce the systematic errors related to the atmospheric composition uncertainties thanks to the estimation of the extinction profile for the Cherenkov light (300-650 nm). The latter has a direct impact on the reconstructed parameters, such as the photon energy and the source flux. In this paper we report on physics results obtained on the Crab Nebula spectrum using the lidar profiles obtained at the H.E.S.S. site.

astro-ph.IM↗
arXiv2017

Raman LIDARs and atmospheric calibration for the Cherenkov Telescope Array

The Cherenkov Telescope Array (CTA) is the next generation of Imaging Atmospheric Cherenkov Telescopes. It will reach a sensitivity and energy resolution never obtained until now by any other high energy gamma-ray experiment. Understanding the systematic uncertainties in general will be a crucial issue for the performance of CTA. It is well known that atmospheric conditions contribute particularly in this aspect.Within the CTA consortium several groups are currently building Raman LIDARs to be installed on the two sites. Raman LIDARs are devices composed of a powerful laser that shoots into the atmosphere, a collector that gathers the backscattered light from molecules and aerosols, a photo-sensor, an optical module that spectrally selects wavelengths of interest, and a read--out system.Unlike currently used elastic LIDARs, they can help reduce the systematic uncertainties of the molecular and aerosol components of the atmosphere to <5% so that CTA can achieve its energy resolution requirements of<10% uncertainty at 1 TeV.All the Raman LIDARs in this work have design features that make them different than typical Raman LIDARs used in atmospheric science and are characterized by large collecting mirrors (2.5m2) and reduced acquisition time.They provide both multiple elastic and Raman read-out channels and custom made optics design.In this paper, the motivation for Raman LIDARs, the design and the status of advance of these technologies are described.

astro-ph.IM↗
arXiv2015

An elastic lidar system for the H.E.S.S. Experiment

The H.E.S.S. experiment in Namibia, Africa, is a high energy gamma ray tele- scope sensitive in the energy range from 100 Gev to a few tens of TeV, via the use of the atmospheric Cherenkov technique. To minimize the systematic errors on the derived fluxes of the measured sources, one has to calculate the impact of the atmospheric properties, in particular the extinction parameter of the Cherenkov light ( 300-650 nm) exploited to observe and reconstruct atmospheric particle showers initiated by gamma-ray photons. A lidar can provide this kind of information for some given wavelengths within this range. In this paper we report on the hardware components, operation and data acquisition of such a system installed at the H.E.S.S. site.

astro-ph.IM↗
arXiv2015

NectarCAM : a camera for the medium size telescopes of the Cherenkov Telescope Array

NectarCAM is a camera proposed for the medium-sized telescopes of the Cherenkov Telescope Array (CTA) covering the central energy range of ~100 GeV to ~30 TeV. It has a modular design and is based on the NECTAr chip, at the heart of which is a GHz sampling Switched Capacitor Array and a 12-bit Analog to Digital converter. The camera will be equipped with 265 7-photomultiplier modules, covering a field of view of 8 degrees. Each module includes the photomultiplier bases, high voltage supply, pre-amplifier, trigger, readout and Ethernet transceiver. The recorded events last between a few nanoseconds and tens of nanoseconds. The camera trigger will be flexible so as to minimize the read-out dead-time of the NECTAr chips. NectarCAM is designed to sustain a data rate of more than 4 kHz with less than 5\% dead time. The camera concept, the design and tests of the various subcomponents and results of thermal and electrical prototypes are presented. The design includes the mechanical structure, cooling of the electronics, read-out, clock distribution, slow control, data-acquisition, triggering, monitoring and services.

astro-ph.IM↗
arXiv2014

A study of decays to strange final states with GlueX in Hall D using components of the BaBar DIRC

We propose to enhance the kaon identification capabilities of the GlueX detector by constructing an FDIRC (Focusing Detection of Internally Reflected Cherenkov) detector utilizing the decommissioned BaBar DIRC components. The GlueX FDIRC would significantly enhance the GlueX physics program by allowing one to search for and study hybrid mesons decaying into kaon final states. Such systematic studies of kaon final states are essential for inferring the quark flavor content of hybrid and conventional mesons. The GlueX FDIRC would reuse one-third of the synthetic fused silica bars that were utilized in the BaBar DIRC. A new focussing photon camera, read out with large area photodetectors, would be developed. We propose operating the enhanced GlueX detector in Hall D for a total of 220 days at an average intensity of 5x10^7 γ/s, a program that was conditionally approved by PAC39

physics.ins-det↗
arXiv2014

The camera of the fifth H.E.S.S. telescope. Part I: System description

In July 2012, as the four ground-based gamma-ray telescopes of the H.E.S.S. (High Energy Stereoscopic System) array reached their tenth year of operation in Khomas Highlands, Namibia, a fifth telescope took its first data as part of the system. This new Cherenkov detector, comprising a 614.5 m^2 reflector with a highly pixelized camera in its focal plane, improves the sensitivity of the current array by a factor two and extends its energy domain down to a few tens of GeV. The present part I of the paper gives a detailed description of the fifth H.E.S.S. telescope's camera, presenting the details of both the hardware and the software, emphasizing the main improvements as compared to previous H.E.S.S. camera technology.

astro-ph.IM↗
arXiv2014

AtmoHEAD 2013 workshop / Atmospheric Monitoring for High-Energy Astroparticle Detectors

A 3-day international workshop on atmospheric monitoring and calibration for high-energy astroparticle detectors, with a view towards next-generation facilities. The atmosphere is an integral component of many high-energy astroparticle detectors. Imaging atmospheric Cherenkov telescopes and cosmic-ray extensive air shower detectors are the two instruments driving the rapidly evolving fields of very-high- and ultra-high-energy astrophysics. In these instruments, the atmosphere is used as a giant calorimeter where cosmic rays and gamma rays deposit their energy and initiate EASs; it is also the medium through which the resulting Cherenkov light propagates. Uncertainties in real-time atmospheric conditions and in the fixed atmospheric models typically dominate all other systematic errors. With the improved sensitivity of upgraded IACTs such as H.E.S.S.-II and MAGIC-II and future facilities like the Cherenkov Telescope Array (CTA) and JEM-EUSO, statistical uncertainties are expected to be significantly reduced, leaving the atmosphere as the limiting factor in the determination of astroparticle spectra. Varying weather conditions necessitate the development of suitable atmospheric monitoring to be integrated in the overall instrument calibration, including Monte Carlo simulations. With expertise distributed across multiple collaborations and scientific domains, an interdisciplinary workshop is being convened to advance progress on this critical and timely topic.

astro-ph.IM↗
arXiv2014

Status and motivation of Raman LIDARs development for the CTA Observatory

The Cherenkov Telescope Array (CTA) is the next generation of Imaging Atmospheric Cherenkov Telescopes. It would reach unprecedented sensitivity and energy resolution in very-high-energy gamma-ray astronomy. In order to reach these goals, the systematic uncertainties derived from the varying atmospheric conditions shall be reduced to the minimum. Different instruments may help to account for these uncertainties. Several groups in the CTA consortium are currently building Raman LIDARs to be installed at the CTA sites. Raman LIDARs are devices composed of a powerful laser that shoots into the atmosphere, a collector that gathers the backscattered light from molecules and aerosols, a photosensor, an optical module that spectrally select wavelengths of interest, and a read-out system. Raman LIDARs can reduce the systematic uncertainties in the reconstruction of the gamma-ray energies down to 5 % level. All Raman LIDARs subject of this work, have design features that make them different than typical Raman LIDARs used in atmospheric science, and are characterized by large collecting mirrors ($\sim2~$m$^2$). They have multiple elastic and Raman read-out channels (at least 4) and custom-made optics design. In this paper, the motivation for Raman LIDARs, the design and the status of advance of these technologies are described.

astro-ph.IM↗
arXiv2013

A LIDAR system for the H.E.S.S. experiment

The H.E.S.S. experiment in Namibia, Africa, is designed to study the origin of high energy cosmic rays from 100 Gev to few tens of TeV, using the Cherenkov technique. To minimize the systematic errors on the derived fluxes of the measured sources, one has to calculate the impact of the atmospheric properties, namely the extinction parameter a. A LIDAR can provide this kind of information within the detectable energy range of the experiment. In this paper we report on the hardware components, operation and data taking of such a system installed on the HESS site for the last three years.

astro-ph.IM↗
arXiv2013

The IFAE/UAB and LUPM Raman LIDARs for Cherenkov Telescope Array Observatory

The Cherenkov Telescope Array (CTA) is the next generation of Imaging Atmospheric Cherenkov Telescopes. It will reach a sensitivity and an energy resolution with no precendent in very high energy gamma-ray astronomy. In order to achieve this goal, the systematic uncertainties derived from the atmospheric conditions shall be reduced to the minimum. Different instruments may help account for these uncertainties. The Barcelona IFAE/UAB (acronyms for Institut de Física d'Altes Energies and Universitat Autònoma de Barcelona, respectively) and the Montpellier LUPM (Laboratoire Univers et Particules de Montpellier) groups are building Raman LIDARs, devices which can reduce the systematic uncertainties in the reconstruction of the gamma-ray energies from 20$%$ down to 5$%$. The Raman LIDARs subject of this work have coaxial 1.8 m mirrors with a Nd-YAG laser each. A liquid light-guide collects the light at the focal plane and transports it to the readout system. We are developping a monochromator with the purpose of testing the readout chain of both LIDARs. This device is composed of a system of filters and a photomultiplier, and will be used to study a particular elastic channel. After characterizing the system, we will build a polychromator to collect also the sparse Raman signal and will optimize it to reduce every possible loss of signal. We report on the current status of the LIDARs development and also the latest results on the different characterization tests.

astro-ph.IM↗
arXiv2013

The NectarCAM camera project

In the framework of the next generation of Cherenkov telescopes, the Cherenkov Telescope Array (CTA), NectarCAM is a camera designed for the medium size telescopes covering the central energy range of 100 GeV to 30 TeV. NectarCAM will be finely pixelated (~ 1800 pixels for a 8 degree field of view, FoV) in order to image atmospheric Cherenkov showers by measuring the charge deposited within a few nanoseconds time-window. It will have additional features like the capacity to record the full waveform with GHz sampling for every pixel and to measure event times with nanosecond accuracy. An array of a few tens of medium size telescopes, equipped with NectarCAMs, will achieve up to a factor of ten improvement in sensitivity over existing instruments in the energy range of 100 GeV to 10 TeV. The camera is made of roughly 250 independent read-out modules, each composed of seven photo-multipliers, with their associated high voltage base and control, a read-out board and a multi-service backplane board. The read-out boards use NECTAr (New Electronics for the Cherenkov Telescope Array) ASICs which have the dual functionality of analogue memories and Analogue to Digital Converter (ADC). The camera trigger to be used will be flexible so as to minimize the read-out dead-time of the NECTAr chips. We present the camera concept and the design and tests of the various subcomponents. The design includes the mechanical parts, the cooling of the electronics, the readout, the data acquisition, the trigger, the monitoring and services.

astro-ph.IM↗
arXiv2008

Future imaging atmospheric telescopes: performance of possible array configurations for gamma photons in the GeV-TeV range

The future of ground based gamma ray astronomy lies in large arrays of Imaging Atmospheric Cherenkov Telescopes (IACT) with better capabilities: lower energy threshold, higher sensitivity, better resolution and background rejection. Currently, designs for the next generation of IACT arrays are being explored by various groups. We have studied possible configurations with a large number of telescopes of various sizes. Here, we present the precision of source, shower core and energy reconstruction for gamma rays in the GeV-TeV range for different altitudes of observation. These results were obtained through tools that we have developed in order to simulate any type of IACT configuration and evaluate its performance.

astro-ph↗