arXiv subjects

G. Wu

Publications and source records attributed to G. Wu.

At least 37 records · Page 2Linked to original sources

arXiv2021

Q-factor optimization for high-beta 650 MHz cavities for PIP-II

High Q-factors are of utmost importance to minimize losses of superconducting radio-frequency cavities deployed in continuous wave particle accelerators. This study elucidates the surface treatment that can maximize the Q-factors in high-beta 650 MHz elliptical niobium cavities. State-of-the-art surface treatments are applied in many single-cell cavities, and surface resistance studies are performed to understand the microwave dissipation at this unexplored frequency. The nitrogen doping treatment is confirmed to be necessary to maximize the Q-factors at medium RF fields. We applied this treatment in five-cell high-beta 650 MHz cavities and demonstrated that extremely high Q-factors were obtained at medium RF fields with this treatment. We also demonstrated that adding a cold electropolishing step after N-doping is crucial to push the quench field of multicell cavities to higher gradients.

physics.acc-ph↗

arXiv2021

Trigonometric Parallaxes of Four Star-forming Regions in the Distant Inner Galaxy

We have measured trigonometric parallaxes for four water masers associated with distant massive young stars in the inner regions of the Galaxy using the VLBA as part of the BeSSeL Survey. G026.50$+$0.28. is located at the near end of the Galactic bar, perhaps at the origin of the Norma spiral arm. G020.77$-$0.05 is in the Galactic Center region and is likely associated with a far-side extension of the Scutum arm. G019.60$-$0.23 and G020.08$-$0.13 are likely associated and lie well past the Galactic Center. These sources appear to be in the Sagittarius spiral arm, but an association with the Perseus arm cannot be ruled out.

astro-ph.GA↗

arXiv2020

The Strength of Nesterov's Extrapolation in the Individual Convergence of Nonsmooth Optimization

The extrapolation strategy raised by Nesterov, which can accelerate the convergence rate of gradient descent methods by orders of magnitude when dealing with smooth convex objective, has led to tremendous success in training machine learning tasks. In this article, the convergence of individual iterates of projected subgradient (PSG) methods for nonsmooth convex optimization problems is theoretically studied based on Nesterov's extrapolation, which we name individual convergence. We prove that Nesterov's extrapolation has the strength to make the individual convergence of PSG optimal for nonsmooth problems. In light of this consideration, a direct modification of the subgradient evaluation suffices to achieve optimal individual convergence for strongly convex problems, which can be regarded as making an interesting step toward the open question about stochastic gradient descent (SGD) posed by Shamir. Furthermore, we give an extension of the derived algorithms to solve regularized learning tasks with nonsmooth losses in stochastic settings. Compared with other state-of-the-art nonsmooth methods, the derived algorithms can serve as an alternative to the basic SGD especially in coping with machine learning problems, where an individual output is needed to guarantee the regularization structure while keeping an optimal rate of convergence. Typically, our method is applicable as an efficient tool for solving large-scale $l$1-regularized hinge-loss learning problems. Several comparison experiments demonstrate that our individual output not only achieves an optimal convergence rate but also guarantees better sparsity than the averaged solution.

cs.LG↗

arXiv2019

Achievement of Ultra-High Quality Factor in Prototype Cryomodule for LCLS-II

Quality factor is a primary cost driver for high energy, continuous wave (CW) SRF linacs like the LCLS-II X-ray free electron laser currently under construction. Taking this into account, several innovations were introduced in the LCLS-II cryomodule design to push substantially beyond the previous state-of-the-art quality factor achieved in operation. This includes the first ever implementation of the nitrogen doping cavity treatment, the capability to provide high mass flow cooldown to improve expulsion of magnetic flux based on recent R&D, high performance magnetic shielding, and other critical subcomponents. To evaluate the implementation of these new cryomodule features, two prototype cryomodules were produced. In this paper, we present results from the prototype cryomodule assembled at Fermilab, which achieved unprecedented cavity quality factors of 3.0e10 at a nominal cryomodule voltage. We overview cavity performance, procedures to achieve ambient magnetic field < 5 mG at the cavity wall, and the successful demonstration of high mass flow cooldown in a cryomodule. The cavity performance under various cool down conditions are presented as well to show the impact of flux expulsion on Q0.

physics.acc-ph↗

arXiv2018

The Role of Magnetic Flux Expulsion to Reach Q0>3x10^10 in SRF Cryomodules

When a superconducting radiofrequency cavity is cooled through its critical temperature, ambient magnetic flux can become "frozen in" to the superconductor, resulting in degradation of the quality factor. This is especially problematic in applications where quality factor is a cost driver, such as in the CW linac for LCLS-II. Previously, it had been unknown how to prevent flux from being trapped during cooldown in bulk niobium cavities, but recent R&D studies showed near-full flux expulsion can be achieved through high temperature heat treatment and cooling cavities through the superconducting transition with a spatial thermal gradient over the surface. In this paper, we describe the first accelerator implementation of these procedures, in cryomodules that are currently being produced for LCLS-II. We compare the performance of cavities under different conditions of heat treatment and thermal gradient during cooldown, showing a substantial improvement in performance when both are applied, enabling cryomodules to reach and, in many cases, exceed a Q0 of ~3x10^10.

physics.acc-ph↗

arXiv2018

Accelerating fields up to 49 MV/m in TESLA-shape superconducting RF niobium cavities via 75C vacuum bake

In this paper we present the discovery of a new surface treatment applied to superconducting radio frequency (SRF) niobium cavities, leading to unprecedented accelerating fields of 49 MV/m in TESLA-shaped cavities, in continuous wave (CW); the corresponding peak magnetic fields are the highest ever measured in CW, about 210 mT. For TESLA-shape cavities the maximum quench field ever achieved was ~45 MV/m - reached very rarely- with most typical values being below 40 MV/m. These values are reached for niobium surfaces treated with electropolishing followed by the so called mild bake, a 120C vacuum bake (for 48 hours for fine grain and 24 hours for large grain surfaces). We discover that the addition during the mild bake of a step at 75C for few hours, before the 120C, increases systematically the quench fields up to unprecedented values of 49 MV/m. The significance of the result lays not only in the relative improvement, but in the proof that niobium surfaces can sustain and exceed CW radio frequency magnetic fields much larger than Hc1, pointing to an extrinsic nature of the current field limitations, and therefore to the potential to reach accelerating fields well beyond the current state of the art.

physics.acc-ph↗

arXiv2018

Commissioning And First Results From The Fermilab Cryomodule Test Stand

A new test stand dedicated to Superconducting Radiofrequency (SRF) cryomodule testing, CMTS1, has been commissioned and is now in operation at Fermilab. The first device to be cooled down and powered in this facility is the prototype 1.3 GHz cryomodule assembled at Fermilab for LCLS-II. We describe the demonstrated capabilities of CMTS1, report on steps taken during commissioning, provide an overview of first test results, and survey future plans.

physics.acc-ph↗

arXiv2018

Evidence for negative thermal expansion in the superconducting precursor phase SmFeAsO

The fluorine-doped rare-earth iron oxypnictide series SmFeAsO$_{1-x}$F$_x$ (0 $\leq x \leq$ 0.10) was investigated with high resolution powder x-ray scattering. In agreement with previous studies, the parent compound SmFeAsO exhibits a tetragonal-to-orthorhombic structural distortion at T$\rm{_{S}}$~=~130~K which is rapidly suppressed by $x \simeq$ 0.10 deep within the superconducting dome. The change in unit cell symmetry is followed by a previously unreported magnetoelastic distortion at 120~K. The temperature dependence of the thermal expansion coefficient $α_{V}$ reveals a rich phase diagram for SmFeAsO: (i) a global minimum at 125 K corresponds to the opening of a spin-density wave instability as measured by pump-probe femtosecond spectroscopy whilst (ii) a global maximum at 110 K corresponds to magnetic ordering of the Sm and Fe sublattices as measured by magnetic x-ray scattering. At much lower temperatures than T$\rm{_{N}}$, SmFeAsO exhibits a significant negative thermal expansion on the order of -40~ppm~$\cdot$~K$^{-1}$ in contrast to the behavior of other rare-earth oxypnictides such as PrFeAsO and the actinide oxypnictide NpFeAsO where the onset of $α<$ 0 only appears in the vicinity of magnetic ordering. Correlating this feature with the temperature and doping dependence of the resistivity and the unit cell parameters, we interpret the negative thermal expansion as being indicative of the possible condensation of itinerant electrons accompanying the opening of a SDW gap, consistent with transport measurements.

cond-mat.supr-con↗

arXiv2017

Large magnetic anisotropy in $Fe_xTaS_2$ single crystals

In intercalated transition metal dichalcogenide $Fe_xTaS_2$ (0.2 $\leq$ x $\leq$ 0.4) single crystals, large magnetic anisotropy is observed. Transport property measurements indicate that heavy Fe-doping leads to a large anisotropy of resistivity ($ρ$$_{c}$/$ρ$$_{ab}$). A sharp M-H hysteresis curve is observed with magnetic field along c-axis, while a linear magnetization appears with magnetic field applied in the ab-plane. The angular dependent magnetic susceptibility from in-plane to out-of-plane indicates that magnetic moments are strongly pinned along the c-axis in an unconventional manner and the coercive field reaches as large as 6 T at T = 5 K. First-principles calculation clearly suggests that the strong spin-orbital coupling give rise to such a large anisotropy of magnetism. The strong pinning effect of magnetic moments along c-axis makes this material a very promising candidate for the development of spin-aligner in spintronics devices.

cond-mat.str-el↗

arXiv2017

Cryomodule Test Stand Reduced-Magnetic Support Design At Fermilab

In a partnership with SLAC National Accelerator Laboratory (SLAC) and Jefferson Lab, Fermilab will assemble and test 17 of the 35 total 1.3 GHz cryomodules for the Linac Coherent Light Source II (LCLS-II) Project. These devices will be tested at Fermilab's Cryomodule Test Facility (CMTF) within the Cryomodule Test Stand (CMTS-1) cave. The problem of magnetic pollution became one of major issues during design stage of the LCLS-II cryomodule as the average quality factor of the accelerating cavities is specified to be $2.7 \times 10^{10}$. One of the possible ways to mitigate the effect of stray magnetic fields and to keep it below the goal of 5 mGauss involves the application of low permeable materials. Initial permeability and magnetic measurement studies regarding the use of 316L stainless steel material indicated that cold work (machining) and heat affected zones from welding would be acceptable.

physics.acc-ph↗

arXiv2012

A blind deconvolution approach to recover effective connectivity brain networks from resting state fMRI data

A great improvement to the insight on brain function that we can get from fMRI data can come from effective connectivity analysis, in which the flow of information between even remote brain regions is inferred by the parameters of a predictive dynamical model. As opposed to biologically inspired models, some techniques as Granger causality (GC) are purely data-driven and rely on statistical prediction and temporal precedence. While powerful and widely applicable, this approach could suffer from two main limitations when applied to BOLD fMRI data: confounding effect of hemodynamic response function (HRF) and conditioning to a large number of variables in presence of short time series. For task-related fMRI, neural population dynamics can be captured by modeling signal dynamics with explicit exogenous inputs; for resting-state fMRI on the other hand, the absence of explicit inputs makes this task more difficult, unless relying on some specific prior physiological hypothesis. In order to overcome these issues and to allow a more general approach, here we present a simple and novel blind-deconvolution technique for BOLD-fMRI signal. Coming to the second limitation, a fully multivariate conditioning with short and noisy data leads to computational problems due to overfitting. Furthermore, conceptual issues arise in presence of redundancy. We thus apply partial conditioning to a limited subset of variables in the framework of information theory, as recently proposed. Mixing these two improvements we compare the differences between BOLD and deconvolved BOLD level effective networks and draw some conclusions.

q-bio.NC↗

arXiv2012

A gap clearing kicker for Main Injector

Fermilab Main Injector has been operating at high Beam Power levels since 2008 when multi-batch slip stacking became operational. In order to maintain and increase the beam power levels the localized beam loss due to beam left over in the injection kicker gap during slip stacking needs to be addressed. A set of gap clearing kickers that kick any beam left in the injection gap to the beam abort have been built. The kickers were installed in the summer of 2009 and became operational in November of 2010. The kicker performance and its effect on the beam losses will be described.

physics.acc-ph↗

arXiv2012

Investigations of surface quality and SRF cavity performance

Magnetic field enhancement has been studied in the past through replica and cavity cutting. Considerable progress of niobium cavity manufacturing and processing has been made since then. Wide variety of single cell cavities has been analyzed through replica technique. Their RF performances were compared in corresponding to geometric RF surface quality. It is concluded that the surface roughness affects cavity performance mostly in secondary role. The other factors must have played primary role in cavity performance limitations.

physics.acc-ph↗

arXiv2012

The infrared dust bubble N22: an expanding HII region and the star formation around it

Aims. To increase the observational samples of star formation around expanding Hii regions, we analyzed the interstellar medium and star formation around N22. Methods. We used data extracted from the seven large-scale surveys from infrared to radio wavelengths. In addition we used the JCMT observations of the J = 3-2 line of 12CO emission data released on CADC and the 12CO J = 2-1 and J =3-2 lines observed by the KOSMA 3 m telescope. We performed a multiwavelength study of bubble N22. Results. A molecular shell composed of several clumps agrees very well with the border of N22, suggesting that its expansion is collecting the surrounding material. The high integrated 12CO line intensity ratio (ranging from 0.7 to 1.14) implies that shocks have driven into the molecular clouds. We identify eleven possible O-type stars inside the Hii region, five of which are located in projection inside the cavity of the 20 cm radio continuum emission and are probably the exciting-star candidates of N22. Twenty-nine YSOs (young stellar objects) are distributed close to the dense cores of N22. We conclude that star formation is indeed active around N22; the formation of most of YSOs may have been triggered by the expanding of the Hii region. After comparing the dynamical age of N22 and the fragmentation time of the molecular shell, we suggest that radiation-driven compression of pre-existing dense clumps may be ongoing.

astro-ph.GA↗

arXiv2010

$^{77}$Se and $^{63}$Cu NMR studies of the electronic correlations in Cu$_x$TiSe$_2$ ($x=0.05, 0.07$)

We report $^{77}$Se and $^{63}$Cu nuclear magnetic resonance (NMR) investigation on the charge-density-wave (CDW) superconductor Cu$_x$TiSe$_2$ ($x=0.05$ and 0.07). At high magnetic fields where superconductivity is suppressed, the temperature dependence of $^{77}$Se and $^{63}$Cu spin-lattice relaxation rates 1/T_{1}$ follow a linear relation. The slope of $^{77}1/T_{1}$ vs \emph{T} increases with the Cu doping. This can be described by a modified Korringa relation which suggests the significance of electronic correlations and the Se 4\emph{p}- and Ti 3\emph{d}-band contribution to the density of states at the Fermi level in the studied compounds.

cond-mat.str-el↗

arXiv2009

Study of Electron Spin Resonance on single crystals $EuFe_{2-x}Co_{x}As_2$

The temperature dependence of electron spin resonance (ESR) was studied in $EuFe_{2-x}Co_{x}As_2 $ (x = 0.0, 0.067, 0.1, 0.2, 0.25, 0.285, 0.35, 0.4 and 0.5). The ESR spectrum of all the samples indicates that the g factor and peak-to-peak linewidth strongly depend on the temperature. Moreover, the peak-to-peak linewidth shows the Korringa behavior, indicating an exchange coupling between the conduction electrons and the $Eu^{2+}$ions. The linewidth, g factor and the integrate ESR intensity show anomalies at the temperature of the spin-density-wave (SDW). The linewidth below the SDW transition does not rely on the temperature. This gives the evidence of the gap opening at the $T_{SDW}$. The slope of the linewidth is closely associated to $T_{SDW}$and $T_C$. This exotic behavior may be related to the nesting of the Fermi surface.

cond-mat.supr-con↗

arXiv2009

Magnetism and superconductivity in single crystals $Eu_{1-x}Sr_xFe_{2-y}Co_{y}As_2$

We systematically studied the transport properties of single crystals of $Eu_{1-x}Sr_xFe_{2-y}$Co$_{y}As_2$. Co doping can suppress the spin-density wave (SDW) ordering and induces a superconducting transition, but a resistivity reentrance due to the antiferromagnetic ordering of $Eu^{2+}$ spins is observed, indicating the competition between antiferromagnetism (AFM) and superconductivity. It is striking that the resistivity reentrance can be completely suppressed by external magnetic field (H) because a metamagnetic transition from antiferromagnetism to ferromagnetism for $Eu^{2+}$ spins is induced by magnetic field. Superconductivity without resistivity reentrance shows up by partial substitution of Eu$^{2+}$ with non-magnetic Sr$^{2+}$ to completely destroy the AFM ordering of $Eu^{2+}$ spins. These results suggest that the antiferromagnetism destroys the superconductivity, while the ferromagnetism can coexist with the superconductivity in the iron-based high-$T_c$ superconductors.

cond-mat.supr-con↗

arXiv2009

Magnetotransport properties in purple bronze Li$_{0.9}$Mo$_6$O$_{17}$ Single Crystal

We have measured resistivity along the a, b and c axes of Li$_{0.9}$Mo$_6$O$_{17}$ single crystal. The anisotropy $ρ$$_c$ / $ρ$$_a$ and $ρ$$_c$ / $ρ$$_b$ is given, confirming the quasi-one-dimensionality of the compound. The sharp decrease in the anisotropy below a certain temperature (T$_M$) indicates dimensional crossover. Superconductivity occurs at 1.8 K well below $T_M$. Negative MRs are observed with magnetic field (H) applied along b axis. This could be ascribed to suppression of energy gap associated with CDW state. While large positive MR is observed with H $\parallel$ c-axis. The MR data can be well fitted by a modified two-band model which has been used in CDW compounds such as quasi-two-dimensional purple bronzes A$_{0.9}$Mo$_6$O$_{17}$ (A = K, Na, Tl) and quasi-one-dimensional conductor NbSe$_3$. The behavior of MR provides a strong evidence for the existence of CDW instability in $Li_{0.9}Mo_6O_{17}$.

cond-mat.str-el↗