arXiv subjects

Gaëlle Lehoucq

Publications and source records attributed to Gaëlle Lehoucq.

8 recordsLinked to original sources

arXiv2022

Mode mapping Q > 500 000 photonic crystal nanocavities using free carrier absorption

We demonstrate a nonlinear photomodulation spectroscopy method to image the mode profile of a high-Q photonic crystal resonator (PhCR). This far-field imaging method is suitable for ultrahigh-Q cavities which we demonstrate on a Q = 619000 PhCR. We scan the PhCR surface with a 405 nm pump beam that modulates the refractive index by local thermal tuning, while probing the response of the resonance. We enhance resolution by probing at high power, using the thermo-optical nonlinearity of the PhCR. Spatial resolution of the thermo-optical effect is typically constrained by the broad thermal profile of the optical pump. Here we go beyond the thermal limit and show that we can approach the diffraction limit of the pump light. This is due to free carrier absorption that heats up the PhCR only when there is overlap between the optical pump spot and the optical mode profile. This is supported with a thermo-optical model that reproduces the high-resolution mode mapping. Results reveal that the observed enhanced resolution is reached for surprisingly low carrier density.

physics.optics↗

arXiv2020

Thermo-optical dynamics of a nonlinear GaInP photonic crystal nanocavity depend on the optical mode profile

We measure the dynamics of the thermo-optical nonlinearity of both a mode-gap nanocavity and a delocalized mode in a Ga$_{\mathrm{0.51}}$In$_{\mathrm{0.49}}$P photonic crystal membrane. We model these results in terms of heat transport and thermo-optical response in the material. By step-modulating the optical input power we push the nonlinear resonance to jump between stable branches of its response curve, causing bistable switching. An overshoot of the intensity followed by a relaxation tail is observed upon bistable switching. In this way, the thermal relaxation of both the localized resonance and the delocalized resonance is measured. Significant difference in decay time is observed and related to the optical mode profile of the resonance. We reproduce the observed transient behavior with our thermo-optical model, implementing a non-instantaneous nonlinearity, and taking into account the optical mode profile of the resonance, as experimentally measured.

physics.optics↗

arXiv2019

Optomechanical Gigahertz Oscillator made of a Two Photon Absorption free piezoelectric III/V semiconductor

Oscillators in the GHz frequency range are key building blocks for telecommunication, timing and positioning applications. Operating directly in the GHz and compactness while keeping high frequency stability, is still an up-to-date challenge. Recently, optomechanical crystals, compact by nature, have demonstrated GHz frequency modes, thus gathering prerequisite features for using them as oscillators. Here we report on the demonstration, in ambient atmospheric conditions, of an optomechanical oscillator designed with an original concept based on bichromatic one-dimensional optomechanical crystal. Self sustained oscillations directly at 3 GHz are routinely achieved with a low optical power threshold of 40 $μW$ and short-term linewidth narrowed down to 100 Hz in agreement with phase noise measurements (-113 dBc/Hz at 1 MHz from the carrier) for free running optomechanical oscillators. This oscillator is made of InGaP, low loss and TPA-free piezoelectric material which makes it valuable for optomechanics.

physics.optics↗

arXiv2019

Two recipes for repelling hot water

Although a hydrophobic microtexture at a solid surface most often reflects rain owing to the presence of entrapped air within the texture, it is much more challenging to repel hot water. As it contacts a colder material, hot water generates condensation within the cavities at the solid surface, which eventually builds bridges between the substrate and the water, and thus destroys repellency. Here we show that both "small" (~100 nm) and "large" (~10 μm) model features do reflect hot drops at any drop temperature and in the whole range of explored impact velocities. Hence, we can define two structural recipes for repelling hot water: drops on nanometric features hardly stick owing to the miniaturization of water bridges, whereas kinetics of condensation in large features is too slow to connect the liquid to the solid at impact.

cond-mat.soft↗

arXiv2017

Compact High-Q Optical Comb based on a Photonic Harmonic Potential

An effective harmonic potential for photons is achieved in a photonic crystal structure, owing to the balance of the background dispersion and a bichromatic potential. Consequently, ultra-compact resonators with several equi-spaced resonances and high loaded Q factors (0.7 million) are demonstrated. A detailed statistical analysis is carried out by exploiting the complex reflection spectra measured with Optical Coherent Tomography. The log-normal distribution of the intrinsic Q-factors peaks at 3 million. The device is made of $Ga_{0.5}In_{0.5}P$ in order to suppress the two photon absorption in the Telecom spectral range considered here. This is crucial to turn the strong localization of light into ultra-efficient parametric interactions.

physics.optics↗

arXiv2015

Broadband tunable hybrid photonic crystal-nanowire light emitter

We integrate about 100 single Cadmium Selenide semiconductor nanowires in self-standing Silicon Nitride photonic crystal cavities in a single processing run. Room temperature measurements reveal a single narrow emission linewidth, corresponding to a Q-factor as large as 5000. By varying the structural parameters of the photonic crystal, the peak wavelength is tuned, thereby covering the entire emission spectral range of the active material. A very large spectral range could be covered by heterogeneous integration of different active materials.

physics.optics↗

arXiv2015

100GHz Integrated All-Optical Switch Enabled by ALD

The carrier lifetime of a photonic crystal all-optical switch is optimized by controlling the surface of GaAs by Atomic Layer Deposition. We demonstrate an all optical modulation capability up to 100GHz at Telecom wavelengths, with a contrast as high as 7dB. Wavelength conversion has also been demonstrated at a repetition rate of 2.5GHz with average pump power of about 0.5mW

physics.optics↗

arXiv2012

Control of dispersion in photonic crystal waveguides using group symmetry theory

We demonstrate dispersion tailoring by coupling the even and the odd modes in a line-defect photonic crystal waveguide. Coupling is determined ab-initio using group theory analysis, rather than by trial and error optimisation of the design parameters. A family of dispersion curves is generated by controlling a single geometrical parameter. This concept is demonstrated experimentally on 1.5mm-long waveguides with very good agreement with theory.

physics.optics↗