arXiv subjects

Gabriela Borin Barin

Publications and source records attributed to Gabriela Borin Barin.

27 records · Page 2Linked to original sources

arXiv2021

Optimized Graphene Electrodes for contacting Graphene Nanoribbons

Atomically precise graphene nanoribbons are a promising emerging class of designer quantum materials with electronic properties that are tunable by chemical design. However, many challenges remain in the device integration of these materials, especially regarding contacting strategies. We report on the device integration of uniaxially aligned and non-aligned 9-atom wide armchair graphene nanoribbons (9-AGNRs) in a field-effect transistor geometry using electron beam lithography-defined graphene electrodes. This approach yields controlled electrode geometries and enables higher fabrication throughput compared to previous approaches using an electrical breakdown technique. Thermal annealing is found to be a crucial step for successful device operation resulting in electronic transport characteristics showing a strong gate dependence. Raman spectroscopy confirms the integrity of the graphene electrodes after patterning and of the GNRs after device integration. Our results demonstrate the importance of the GNR-graphene electrode interface and pave the way for GNR device integration with structurally well-defined electrodes.

cond-mat.mes-hall↗

arXiv2020

Quantum Electronic Transport Across "Bite" Defects in Graphene Nanoribbons

On-surface synthesis has recently emerged as an effective route towards the atomically precise fabrication of graphene nanoribbons of controlled topologies and widths. However, whether and to which degree structural disorder occurs in the resulting samples is a crucial issue for prospective applications that remains to be explored. Here, we experimentally identify missing benzene rings at the edges, which we name "bite" defects, as the most abundant type of disorder in armchair nanoribbons synthesized by the bottom-up approach. First, we address their density and spatial distribution on the basis of scanning tunnelling microscopy and find that they exhibit a strong tendency to aggregate. Next, we explore their effect on the quantum charge transport from first-principles calculations, revealing that such imperfections substantially disrupt the conduction properties at the band edges. Finally, we generalize our theoretical findings to wider nanoribbons in a systematic manner, hence establishing practical guidelines to minimize the detrimental role of such defects on the charge transport. Overall, our work portrays a detailed picture of "bite" defects in bottom-up armchair graphene nanoribbons and assesses their effect on the performance of carbon-based nanoelectronic devices.

cond-mat.mtrl-sci↗

arXiv2019

Controlled quantum dot formation in atomically engineered graphene nanoribbons field-effect transistors

Graphene nanoribbons (GNRs) have attracted a strong interest from researchers worldwide, as they constitute an emerging class of quantum-designed materials. The major challenges towards their exploitation in electronic applications include reliable contacting, complicated by their small size ($<$50 nm), as well as the preservation of their physical properties upon device integration. In this combined experimental and theoretical study, we report on the quantum dot (QD) behavior of atomically precise GNRs integrated in a device geometry. The devices consist of a film of aligned 5-atoms wide GNRs (5-AGNRs) transferred onto graphene electrodes with a sub 5-nm nanogap. We demonstrate that the narrow-bandgap 5-AGNRs exhibit metal-like behavior resulting in linear IV curves for low bias voltages at room temperature and single-electron transistor behavior for temperatures below 150~K. By performing spectroscopy of the molecular levels at 13~K, we obtain addition energies in the range of 200-300 meV. DFT calculations predict comparable addition energies and reveal the presence of two electronic states within the bandgap of infinite ribbons when the finite length of the 5-AGNRs is accounted for. By demonstrating the preservation of the 5-AGNRs electronic properties upon device integration, as demonstrated by transport spectroscopy, our study provides a critical step forward in the realisation of more exotic GNR-based nano-electronic devices.

cond-mat.mes-hall↗

arXiv2019

A Universal Length-Dependent Vibrational Mode in Graphene Nanoribbons

Graphene nanoribbons (GNRs) have attracted considerable interest as their atomically tunable structure makes them promising candidates for future electronic devices. However, obtaining detailed information about the length of GNRs has been challenging and typically relies on low-temperature scanning tunneling microscopy. Such methods are ill-suited for practical device application and characterization. In contrast, Raman spectroscopy is a sensitive method for the characterization of GNRs, in particular for investigating their width and structure. Here, we report on a length-dependent, Raman active low-energy vibrational mode that is present in atomically precise, bottom-up synthesized armchair graphene nanoribbons (AGNRs). Our Raman study demonstrates that this mode is present in all families of AGNRs and provides information on their length. Our spectroscopic findings are corroborated by scanning tunneling microscopy images and supported by first-principles calculations that allow us to attribute this mode to a longitudinal acoustic phonon. Finally, we show that this mode is a sensitive probe for the overall structural integrity of the ribbons and their interaction with technologically relevant substrates.

cond-mat.mes-hall↗

arXiv2019

Optimized substrates and measurement approaches for Raman spectroscopy of graphene nanoribbons

The on-surface synthesis of graphene nanoribbons (GNRs) allows for the fabrication of atomically precise narrow GNRs. Despite their exceptional properties which can be tuned by ribbon width and edge structure, significant challenges remain for GNR processing and characterization. In this contribution, we use Raman spectroscopy to characterize different types of GNRs on their growth substrate and to track their quality upon substrate transfer. We present a Raman-optimized (RO) device substrate and an optimized mapping approach that allows for acquisition of high-resolution Raman spectra, achieving enhancement factors as high as 120 with respect to signals measured on standard SiO2/Si substrates. We show that this approach is well-suited to routinely monitor the geometry-dependent low-frequency modes of GNRs. In particular, we track the radial breathing-like mode (RBLM) and the shear-like mode (SLM) for 5-, 7- and 9-atom wide armchair GNRs (AGNRs) and compare their frequencies with first-principles calculations.

cond-mat.mtrl-sci↗

arXiv2019

Structure-dependent electrical properties of graphene nanoribbon devices with graphene electrodes

Graphene nanoribbons (GNRs) are a novel and intriguing class of materials in the field of nanoelectronics, since their properties, solely defined by their width and edge type, are controllable with high precision directly from synthesis. Here we study the correlation between the GNR structure and the corresponding device electrical properties. We investigated a series of field effect devices consisting of a film of armchair GNRs with different structures (namely width and/or length) as the transistor channel, contacted with narrowly spaced graphene sheets as the source-drain electrodes. By analyzing several tens of junctions for each individual GNR type, we observe that the values of the output current display a width-dependent behavior, indicating electronic bandgaps in good agreement with the predicted theoretical values. These results provide insights into the link between the ribbon structure and the device properties, which are fundamental for the development of GNR-based electronics.

cond-mat.mes-hall↗

arXiv2019

Substrate transfer and ex situ characterization of on-surface synthesized graphene nanoribbons

Recent progress in the on-surface synthesis of graphene nanoribbons (GNRs) has given access to atomically precise narrow GNRs with tunable electronic band gaps that makes them excellent candidates for room-temperature switching devices such as field-effect transistors (FET). However, in spite of their exceptional properties, significant challenges remain for GNR processing and characterization. This contribution addresses some of the most important challenges, including GNR fabrication scalability, substrate transfer, long-term stability under ambient conditions and ex situ characterization. We focus on 7- and 9-atom wide armchair graphene nanoribbons (i.e, 7-AGNR; and 9-AGNR) grown on 200 nm Au(111)/mica substrates using a high throughput system. Transfer of both, 7- and 9-AGNRs from their Au growth sub-strate onto various target substrates for additional characterization is accomplished utilizing a polymer-free method that avoids residual contamination. This results in a homogeneous GNR film morphology with very few tears and wrinkles, as examined by atomic force microscopy. Raman spectroscopy indicates no significant degradation of GNR quality upon substrate transfer, and reveals that GNRs have remarkable stability under ambient conditions over a 24-month period. The transferred GNRs are analyzed using multi-wavelength Raman spectroscopy, which provides detailed insight into the wavelength dependence of the width-specific vibrational modes. Finally, we characterize the optical properties of 7- and 9-AGNRs via ultra-violet-visible (UV-Vis) spectroscopy

cond-mat.mtrl-sci↗

arXiv2018

Engineering of robust topological quantum phases in graphene nanoribbons

Here we present a flexible strategy to realize robust nanomaterials exhibiting valence electronic structures whose fundamental physics is described by the SSH-Hamiltonian. These solid-state materials are realized using atomically precise graphene nanoribbons (GNR). We demonstrate the controlled periodic coupling of topological boundary states at junctions of armchair GNRs of different widths to create quasi-1D trivial and non-trivial electronic quantum phases. Their topological class is experimentally determined by drawing upon the bulk-boundary correspondence and measuring the presence (non-trivial) or absence (trivial) of localized end states by scanning tunneling spectroscopy (STS). The strategy we propose has the potential to tune the band width of the topological electronic bands close to the energy scale of proximity induced spin-orbit coupling or superconductivity, and may allow the realization of Kitaev like Hamiltonians and Majorana type end states.

cond-mat.mes-hall↗

arXiv2017

Short-Channel Field Effect Transistors with 9-Atom and 13-Atom wide Graphene Nanoribbons

Bottom-up synthesized GNRs and GNR heterostructures have promising electronic properties for high performance field effect transistors (FETs) and ultra-low power devices such as tunnelling FETs. However, the short length and wide band gap of these GNRs have prevented the fabrication of devices with the desired performance and switching behaviour. Here, by fabricating short channel (Lch ~20 nm) devices with a thin, high-k gate dielectric and a 9-atom wide (0.95 nm) armchair GNR as the channel material, we demonstrate FETs with high on-current (Ion >1 uA at Vd = -1 V) and high Ion/Ioff ~10^5 at room temperature. We find that the performance of these devices is limited by tunnelling through the Schottky barrier (SB) at the contacts and we observe an increase in the transparency of the barrier by increasing the gate field near the contacts. Our results thus demonstrate successful fabrication of high performance short-channel FETs with bottom-up synthesized armchair GNRs.

cond-mat.mes-hall↗