Searcharxiv⌕ Search

arXiv subjects

Gabriele Liga

Publications and source records attributed to Gabriele Liga.

At least 55 records · Page 3Linked to original sources
arXiv2020

An Improved Model of Nonlinear Fiber Propagation in the Presence of Kerr Nonlinearity and Stimulated Raman Scattering

Ultra-wideband fiber optical transmission suffers from both Kerr nonlinearity and stimulated Raman scattering (SRS). Mathematical models that address the interplay between Kerr nonlinearity and SRS exist. These models are based on the Gaussian-noise (GN) and enhanced Gaussian noise (EGN) models. In this paper, we propose a modulation-format-dependent model, accounting for an enhanced link function, which is valid for non-identical spans where the fiber span loss and SRS gain/loss are not necessarily compensated for by the amplifier at the end of each span. A new signal power profile is also introduced, comprising the frequency-dependent fiber attenuation. The proposed analytical model takes all terms of nonlinear interference (NLI), including self-channel interference, cross-channel interference, and multi-channel interference, into account. It is also shown that the proposed model has the power to predict the NLI power with greater precision than the previous models can. Split-step Fourier simulations indicate that when both SRS and arbitrary modulation formats are considered, previous models may inaccurately predict the NLI power. This difference could be up to 4.3 dB for a 10.011 THz system with 1001 channels at 10 Gbaud.

eess.SP↗
arXiv2020

Model-Based Machine Learning for Joint Digital Backpropagation and PMD Compensation

In this paper, we propose a model-based machine-learning approach for dual-polarization systems by parameterizing the split-step Fourier method for the Manakov-PMD equation. The resulting method combines hardware-friendly time-domain nonlinearity mitigation via the recently proposed learned digital backpropagation (LDBP) with distributed compensation of polarization-mode dispersion (PMD). We refer to the resulting approach as LDBP-PMD. We train LDBP-PMD on multiple PMD realizations and show that it converges within 1% of its peak dB performance after 428 training iterations on average, yielding a peak effective signal-to-noise ratio of only 0.30 dB below the PMD-free case. Similar to state-of-the-art lumped PMD compensation algorithms in practical systems, our approach does not assume any knowledge about the particular PMD realization along the link, nor any knowledge about the total accumulated PMD. This is a significant improvement compared to prior work on distributed PMD compensation, where knowledge about the accumulated PMD is typically assumed. We also compare different parameterization choices in terms of performance, complexity, and convergence behavior. Lastly, we demonstrate that the learned models can be successfully retrained after an abrupt change of the PMD realization along the fiber.

eess.SP↗
arXiv2020

Analytical Modeling of Nonlinear Fiber Propagation for Four Dimensional Symmetric Constellations

Coherent optical transmission systems naturally lead to a four dimensional (4D) signal space, i.e., two polarizations each with two quadratures. In this paper we derive an analytical model to quantify the impact of Kerr nonlinearity on such 4Dspaces, taking the interpolarization dependency into account. This is in contrast to previous models such as the GN and EGN models, which are valid for polarization multiplexed (PM)formats, where the two polarizations are seen as independent channels on which data is multiplexed. The proposed model agrees with the EGN model in the special case of independent two-dimensional modulation in each polarization. The model accounts for the predominant nonlinear terms in a WDM system, namely self-phase modulation and and cross-phase modulation. Numerical results show that the EGN model may inaccurately estimate the nonlinear interference of 4D formats. This nonlinear interference discrepancy between the results of the proposed model and the EGN model could be up to 2.8 dB for a system with 80 WDM channels. The derived model is validated by split-step Fourier simulations, and it is shown to follow simulations very closely.

eess.SP↗
arXiv2020

Extending fibre nonlinear interference power modelling to account for general dual-polarisation 4D modulation formats

In optical communications, four-dimensional (4D) modulation formats encode information onto the quadrature components of two arbitrary orthogonal states of polarisation of the optical field. These formats have recently regained attention due their potential power efficiency, nonlinearity tolerance, and ultimately to their still unexplored shaping gains. As in the fibre-optic channel the shaping gain is closely related to the nonlinearity tolerance of a given modulation format, predicting the effect of nonlinearity is key to effectively optimise the transmitted constellation. Many analytical models available in the optical communication literature allow, within a first-order perturbation framework, the computation of the average power of the nonlinear interference (NLI) accumulated in coherent fibre-optic transmission systems. However, all current models only operate under the assumption of a transmitted polarisation-multiplexed, two-dimensional (PM-2D) modulation format. PM-2D formats represent a limited subset of the possible dual-polarisation 4D formats, namely, only those where data transmitted on each polarisation channel are mutually independent and identically distributed. This document presents a step-by-step mathematical derivation of the extension of existing NLI models to the class of arbitrary dual-polarisation 4D modulation formats. In particular, the methodology adopted follows the one of the popular enhanced Gaussian noise model, albeit dropping most assumptions on the geometry and statistic of the transmitted 4D modulation format. The resulting expressions show that, whilst in the PM-2D case the NLI power depends only on different statistical high-order moments of each polarisation component, for a general 4D constellation also several others cross-polarisation correlations need to be taken into account.

eess.SP↗
arXiv2020

Revisiting Efficient Multi-Step Nonlinearity Compensation with Machine Learning: An Experimental Demonstration

Efficient nonlinearity compensation in fiber-optic communication systems is considered a key element to go beyond the "capacity crunch''. One guiding principle for previous work on the design of practical nonlinearity compensation schemes is that fewer steps lead to better systems. In this paper, we challenge this assumption and show how to carefully design multi-step approaches that provide better performance--complexity trade-offs than their few-step counterparts. We consider the recently proposed learned digital backpropagation (LDBP) approach, where the linear steps in the split-step method are re-interpreted as general linear functions, similar to the weight matrices in a deep neural network. Our main contribution lies in an experimental demonstration of this approach for a 25 Gbaud single-channel optical transmission system. It is shown how LDBP can be integrated into a coherent receiver DSP chain and successfully trained in the presence of various hardware impairments. Our results show that LDBP with limited complexity can achieve better performance than standard DBP by using very short, but jointly optimized, finite-impulse response filters in each step. This paper also provides an overview of recently proposed extensions of LDBP and we comment on potentially interesting avenues for future work.

eess.SP↗
arXiv2020

Geometric Shaping of 2-Dimensional Constellations in the Presence of Laser Phase Noise

In this paper, we propose a geometric shaping (GS) strategy to design 8, 16, 32 and 64-ary modulation formats for the optical fibre channel impaired by both additive white Gaussian (AWGN) and phase noise. The constellations were optimised to maximise generalised mutual information (GMI) using a mismatched channel model. The presented formats demonstrate an enhanced signal-to-noise ratio (SNR) tolerance in high phase noise regimes when compared with their quadrature amplitude modulation (QAM) or AWGN-optimised counterparts. By putting the optimisation results in the context of the 400ZR implementation agreement, we show that GS alone can either relax the laser linewidth (LW) or carrier phase estimation (CPE) requirements of 400 Gbit/s transmission links and beyond. Following the GMI validation, the performance of the presented formats was examined in terms of post forward error correction (FEC) bit-error-rate (BER) for a soft decision (SD) extended Hamming code (128, 120), implemented as per the 400ZR implementation agreement. We demonstrate gains of up to 1.2 dB when compared to the 64-ary AWGN shaped formats.

cs.IT↗
arXiv2019

30% Reach Increase via Low-complexity Hybrid HD/SD FEC and Nonlinearity-tolerant 4D Modulation

Current optical coherent transponders technology is driving data rates towards 1 Tb/s/λand beyond. This trend requires both high-performance coded modulation schemes and efficient implementation of the forward-error-correction (FEC) decoder. A possible solution to this problem is combining advanced multidimensional modulation formats with low-complexity hybrid HD/SD FEC decoders. Following this rationale, in this paper we combine two recently introduced coded modulation techniques:the geometrically-shaped 4D-64 polarization ring-switched and the soft-aided bit-marking-scaled reliability decoder. This joint scheme enabled us to experimentally demonstrate the transmission of 11x218 Gbit/s channels over transatlantic distances at 5.2bit/4D-sym. Furthermore, a 30% reach increase is demonstrated over PM-8QAM and conventional HD-FEC decoding for product codes.

eess.SP↗
arXiv2019

Deep Learning for Communication over Dispersive Nonlinear Channels: Performance and Comparison with Classical Digital Signal Processing

In this paper, we apply deep learning for communication over dispersive channels with power detection, as encountered in low-cost optical intensity modulation/direct detection (IM/DD) links. We consider an autoencoder based on the recently proposed sliding window bidirectional recurrent neural network (SBRNN) design to realize the transceiver for optical IM/DD communication. We show that its performance can be improved by introducing a weighted sequence estimation scheme at the receiver. Moreover, we perform bit-to-symbol mapping optimization to reduce the bit-error rate (BER) of the system. Furthermore, we carry out a detailed comparison with classical schemes based on pulse-amplitude modulation and maximum likelihood sequence detection (MLSD). Our investigation shows that for a reference 42\,Gb/s transmission, the SBRNN autoencoder achieves a BER performance comparable to MLSD, when both systems account for the same amount of memory. In contrast to MLSD, the SBRNN performance is achieved without incurring a computational complexity exponentially growing with the processed memory.

cs.IT↗
arXiv2019

Improving HD-FEC decoding via bit marking

We review the recently introduced soft-aided bit-marking (SABM) algorithm and its suitability for product codes. Some aspects of the implementation of the SABM algorithm are discussed. The influence of suboptimal channel soft information is also analyzed.

cs.IT↗
arXiv2019

A novel soft-aided bit-marking decoder for product codes

We introduce a novel soft-aided hard-decision decoder for product codes adopting bit marking via updated reliabilities at each decoding iteration. Gains up to 0.8 dB vs. standard iterative bounded distance decoding and up to 0.3 dB vs. our previously proposed bit-marking decoder are demonstrated.

cs.IT↗
arXiv2019

Revisiting Multi-Step Nonlinearity Compensation with Machine Learning

For the efficient compensation of fiber nonlinearity, one of the guiding principles appears to be: fewer steps are better and more efficient. We challenge this assumption and show that carefully designed multi-step approaches can lead to better performance-complexity trade-offs than their few-step counterparts.

eess.SP↗
arXiv2019

Improved Decoding of Staircase Codes: The Soft-aided Bit-marking (SABM) Algorithm

Staircase codes (SCCs) are typically decoded using iterative bounded-distance decoding (BDD) and hard decisions. In this paper, a novel decoding algorithm is proposed, which partially uses soft information from the channel. The proposed algorithm is based on marking certain number of highly reliable and highly unreliable bits. These marked bits are used to improve the miscorrection-detection capability of the SCC decoder and the error-correcting capability of BDD. For SCCs with $2$-error-correcting Bose-Chaudhuri-Hocquenghem component codes, our algorithm improves upon standard SCC decoding by up to $0.30$~dB at a bit-error rate (BER) of $10^{-7}$. The proposed algorithm is shown to achieve almost half of the gain achievable by an idealized decoder with this structure. A complexity analysis based on the number of additional calls to the component BDD decoder shows that the relative complexity increase is only around $4\%$ at a BER of $10^{-4}$. This additional complexity is shown to decrease as the channel quality improves. Our algorithm is also extended (with minor modifications) to product codes. The simulation results show that in this case, the algorithm offers gains of up to $0.44$~dB at a BER of $10^{-8}$.

eess.SP↗
arXiv2018

Volterra-assisted Optical Phase Conjugation: a Hybrid Optical-Digital Scheme For Fiber Nonlinearity Compensation

Mitigation of optical fiber nonlinearity is an active research field in the area of optical communications, due to the resulting marked improvement in transmission performance. Following the resurgence of optical coherent detection, digital nonlinearity compensation (NLC) schemes such as digital backpropagation (DBP) and Volterra equalization have received much attention. Alternatively, optical NLC, and specifically optical phase conjugation (OPC), has been proposed to relax the digital signal processing complexity. In this work, a novel hybrid optical-digital NLC scheme combining OPC and a Volterra equalizer is proposed, termed Volterra-Assisted OPC (VAO). It has a twofold advantage: it overcomes the OPC limitation in asymmetric links and substantially enhances the performance of Volterra equalizers. The proposed scheme is shown to outperform both OPC and Volterra equalization alone by up to 4.2 dB in a 1000 km EDFA-amplified fiber link. Moreover, VAO is also demonstrated to be very robust when applied to long-transmission distances, with a 2.5 dB gain over OPC-only systems at 3000 km. VAO combines the advantages of both optical and digital NLC offering a promising trade-off between performance and complexity for future high-speed optical communication systems.

eess.SP↗
arXiv2017

Digital Nonlinearity Compensation in High-Capacity Optical Fibre Communication Systems: Performance and Optimisation

Meeting the ever-growing information rate demands has become of utmost importance for optical communication systems. However, it has proven to be a challenging task due to the presence of Kerr effects, which have largely been regarded as a major bottleneck for enhancing the achievable information rates in modern optical communications. In this work, the optimisation and performance of digital nonlinearity compensation are discussed for maximising the achievable information rates in spectrally-efficient optical fibre communication systems. It is found that, for any given target information rate, there exists a trade-off between modulation format and compensated bandwidth to reduce the computational complexity requirement of digital nonlinearity compensation.

eess.SP↗
arXiv2016

Information Rates of Next-Generation Long-Haul Optical Fiber Systems Using Coded Modulation

A comprehensive study of the coded performance of long-haul spectrally-efficient WDM optical fiber transmission systems with different coded modulation decoding structures is presented. Achievable information rates are derived for three different square QAM formats and the optimal format is identified as a function of distance and specific decoder implementation. The four cases analyzed combine hard-decision (HD) or soft-decision (SD) decoding together with either a bit-wise or a symbol-wise demapper, the last two suitable for binary and nonbinary codes, respectively. The information rates achievable for each scheme are calculated based on the mismatched decoder principle. These quantities represent true indicators of the coded performance of the system for specific decoder implementations and when the modulation format and its input distribution are fixed. In combination with the structure of the decoder, two different receiver-side equalization strategies are also analyzed: electronic dispersion compensation and digital backpropagation. We show that, somewhat unexpectedly, schemes based on nonbinary HD codes can achieve information rates comparable to SD decoders and that, when SD is used, switching from a symbol-wise to a bit-wise decoder results in a negligible penalty. Conversely, from an information-theoretic standpoint, HD binary decoders are shown to be unsuitable for spectrally-efficient, long-haul systems.

cs.IT↗