arXiv subjects

Gabriele Saleh

Publications and source records attributed to Gabriele Saleh.

7 recordsLinked to original sources

arXiv2026

Scalable Conformal MoSx Catalyst for Efficient Hydrogen Evolution at Industrial-Level Current Density in Alkaline Electrolyzers

The development of simple and scalable fabrication strategies for cost-effective electrodes is crucial to advance water splitting in alkaline water electrolyzers (AWEs). Here, we present a coating-annealing method to conformally coat a MoSx catalyst layer onto a porous Ni foam (NF) substrate. By controlling the annealing process, the composition of the MoSx layer could be tuned from MoS2 to MoS3 and its catalytic performance for hydrogen evolution reaction (HER) in alkaline media was optimized. The MoS3@NF synthesized by this method achieved industrially relevant HER current densities of 200 mA/cm2 at a low overpotential of 246 mV, maintaining stable operation for over 240 h. The MoS3@NF cathode, combined with a stainless steel anode, enabled an alkaline water electrolyzer (AWE) cell to operate steadily at 1.96 V and 1 A/cm2 for 1000 h. This performance surpasses that of most of the previously reported water electrolyzers employing MoSx-based cathodes. Our work demonstrates the potential of MoS3 (with its abundant edge-sulfur atoms serving as active sites) as a high-performance cathode material for industrial AWEs.

cond-mat.mtrl-sci↗

arXiv2026

A Nanocrystal Synthesis Derived Approach to Silver Bismuth Iodide Layered Double Perovskites with Aliphatic Amines: (CnH(2n+1)NH3)4AgBiI8

Lead-free iodide double perovskites are an interesting class of materials since they combine a relatively low toxicity (compared to the lead counterpart) with the small bandgap typical of iodide-based perovskite structures. Their reported number is small due to their lower structural stability compared to the chloride and bromide analogues, hence their difficult synthesis. The structural constraints that limit stability, on the other hand, can be much relieved in layered, organic-inorganic perovskites. Following this line of thought, we report here a successful fast precipitation route to iodide layered (CnH(2n+1)NH3)4AgBiI8 (n = 10, 12, and 14) double perovskites that borrow concepts from the synthesis of colloidal nanocrystals. X-ray diffraction studies revealed for these compounds a monoclinic crystal structure containing edge-sharing alternated [AgI6] and [BiI6] octahedra. These materials have experimental band gaps of 2.1 eV, as also corroborated by theoretical calculations. We have also investigated their phase transitions by thermal analysis and temperature-dependent diffraction and found them to be similar to their lead-based layered perovskite counterparts.

cond-mat.mtrl-sci↗

arXiv2026

The Predictive Power of Chemical Bonding Analysis in Materials: a Perspective on Optoelectronic Properties

Chemical bonding governs how atoms interact to form compounds, thereby determining their physicochemical properties. Despite being an elusive concept, chemical bonding has led to the development of models and tools to explain and predict the behavior of chemical species. This perspective addresses the adoption of chemical bonding analysis to the study of optoelectronic materials, emphasizing the im-portance of its predictive aspect. After reviewing the evolution of chemical bonding models from the first Lewis formulation to the present day, the perspective discusses material classes and chemical bonding phenomena most relevant for light harvesting and emission. We delve into metal halide perovskites and structurally related materials, given their central role in optoelectronic research. Various aspects of chemical bonding in these materials are surveyed, from the structure-property relationship to the rationalization of their electronic properties through molecular orbital diagrams. Two chemical bonding features are particularly important for optoelectronic materials: the ns2 lone pairs of the cations typically found in these materials (e.g. Pb, Sb, Bi) and the antibonding nature of valence and/or conduction bands. We discuss in depth the models to predict the implications of these two phenomena on optoelectronic properties. We also explore chalcohal-ides, a class of materials whose optoelectronic properties are recently emerging. From the chemical bonding perspective, these materials display intriguing phenomena due to the interplay of various types of chemical bonds. Finally, we discuss our vision on the role of chemical bonding analysis in the future of materials science, including synergies and antitheses with machine learning.

cond-mat.mtrl-sci↗

arXiv2025

Breaking the Boundaries of the Goldschmidt Tolerance Factor with Ethylammonium Lead Iodide Perovskite Nanocrystals

We report the synthesis of ethylammonium lead iodide (EAPbI3) colloidal nanocrystals as another member of the lead halide perovskites family. The insertion of an unusually large A-cation (274 pm in diameter) in the perovskite structure, hitherto considered unlikely due to the unfavorable Goldschmidt tolerance factor, results in a significantly larger lattice parameter compared to the Cs-, methylammonium- and formamidinium-based lead halide perovskite homologues. As a consequence, EAPbI3 nanocrystals are highly unstable, evolving to a non-perovskite delta-EAPbI3 polymorph within one day. Also, EAPbI3 nanocrystals are very sensitive to electron irradiation and quickly degrade to PbI2 upon exposure to the electron beam, following a mechanism similar to that of other hybrid lead iodide perovskites (although degradation can be reduced by partially replacing the EA+ ions with Cs+ ions). Interestingly, in some cases during this degradation the formation of an epitaxial interface between (EAxCs1-x)PbI3 and PbI2 is observed. The photoluminescence emission of the EAPbI3 perovskite nanocrystals, albeit being characterized by a low quantum yield (around 1%), can be tuned in the 664-690 nm range by regulating their size during the synthesis. The emission efficiency can be improved upon partial alloying at the A site with Cs+ or formamidinium cations. Furthermore, the morphology of the EAPbI3 nanocrystals can be chosen to be either nanocube or nanoplatelet, depending on the synthesis conditions.

cond-mat.mtrl-sci↗

arXiv2024

Ultrasmall CsPbBr3 Blue Emissive Perovskite Quantum Dots using K-alloyed Cs4PbBr6 Nanocrystals as Precursors

We report a colloidal synthesis of blue emissive, stable cube-shaped CsPbBr3 quantum dots (QDs) in the strong quantum confinement regime via a dissolution-recrystallization starting from pre-synthesized (KxCs1-x)4PbBr6 nanocrystals which are then reacted with PbBr2. This is markedly different from the known case of Cs4PbBr6 nanocrystals that react within seconds with PbBr2 and get transformed into much larger, green emitting CsPbBr3 nanocrystals. Here, instead, the conversion of (KxCs1-x)4PbBr6 nanocrystals to CsPbBr3 QDs occurs in a time span of hours, and tuning of the QDs size is achieved by adjusting the concentration of precursors. The QDs exhibit excitonic features in optical absorption that are tunable in the 420 - 452 nm range, accompanied by blue photoluminescence with quantum yield around 60%. Detailed spectroscopic investigations in both the single and multi-exciton regime reveal the exciton fine structure and the effect of Auger recombination of these CsPbBr3 QDs, confirming theoretical predictions for this system.

physics.app-ph↗

arXiv2017

A stable compound of helium and sodium at high pressure

Helium is generally understood to be chemically inert and this is due to its extremely stable closed-shell electronic configuration, zero electron affinity and an unsurpassed ionization potential. It is not known to form thermodynamically stable compounds, except a few inclusion compounds. Here, using the ab initio evolutionary algorithm USPEX and subsequent high-pressure synthesis in a diamond anvil cell, we report the discovery of a thermodynamically stable compound of helium and sodium, Na2He, which has a fluorite-type structure and is stable at pressures >113 GPa. We show that the presence of He atoms causes strong electron localization and makes this material insulating. This phase is an electride, with electron pairs localized in interstices, forming eight-centre two-electron bonds within empty Na8 cubes. We also predict the existence of Na2HeO with a similar structure at pressures above 15 GPa.

cond-mat.mtrl-sci↗

arXiv2016

Pressure-induced stabilization of carbonic acid and other compounds in the C-H-O system

The physicochemical behavior of elements and compounds is heavily altered by high pressure. The occurrence of pressure-induced reactions and phase transitions can be revealed by crystal structure prediction approaches. In this work, we explore the C-H-O phase diagram up to 400 GPa exploiting an evolutionary algorithm for crystal structure predictions along with ab initio calculations. Besides uncovering new stable polymorphs of high-pressure elements and known molecules, we predicted the formation of new compounds. A 2CH4:3H2 inclusion compound forms at low pressure and remains stable up to 215 GPa. Carbonic acid (H2CO3), highly unstable at ambient conditions, was predicted to form exothermically at mild pressure (about 1 GPa). As pressure rises, it polymerizes and, above 300 GPa, reacts with water to form orthocarbonic acid (H4CO4). This unexpected high-pressure chemistry is rationalized by analyzing charge density and electron localization function distributions, and implications for general chemistry and planetary science are also discussed.

cond-mat.mtrl-sci↗