arXiv subjects

Gail Schaefer

Publications and source records attributed to Gail Schaefer.

At least 19 recordsLinked to original sources

arXiv2026

Diameters and Temperatures VII: High-angular resolution measurements of Solar-type stars with the CHARA Array

We present interferometric measurements of angular diameters for 27 nearby solar-type stars obtained with the Precision Astronomical Visible Observations (PAVO) beam combiner at the CHARA Array. The sample spans a broad range of metallicities, includes several known exoplanet hosts, and covers evolutionary stages from the zero-age main sequence to mildly evolved subgiants. Uniform-disk and limb-darkened angular diameters were measured for each target and combined with bolometric fluxes and Gaia parallaxes to determine precise, model-independent stellar radii, effective temperatures, and luminosities. We achieve typical uncertainties of $\sim1$\% in radius and $\sim1.5$\% in effective temperature. Comparisons with multiple stellar evolutionary model grids yield mass and age estimates and enable assessment of grid-to-grid systematics, highlighting sensitivities to abundances, evolutionary stage, and proximity to grid boundaries. Our results provide empirical benchmarks for testing stellar evolutionary theory, refining surface brightness-color relations, and improving the characterization of exoplanet host stars.

astro-ph.SR↗

arXiv2026

The Periastron Passage of T Tauri South B as Viewed by ALMA: Millimeter Flux Variations and Dust Heating Triggered by Orbital Motion

We present 225 and 350 GHz imaging of the iconic T Tauri system using the Atacama Large Millimeter submillimeter Array (ALMA). T Tauri is a hierarchical triple system, and the close binary T Tau Sa/Sb underwent periastron passage in March 2023. The ALMA images were obtained in epochs spanning November 2019 through June 2023, and therefore covered the time frame of the recent periastron passage. We clearly resolve the Sa-Sb binary in two epochs of high-resolution measurements with ALMA. We find increases in millimeter flux from heating of the Sa disk and the wider distribution of dust in the environment of the binary. This heating is likely in response to increased stellar accretion activity triggered by orbital motion during the dynamic periastron passage of T Tau Sb around Sa. Resolved, extended millimeter emission is also found to change morphology and increase in flux in the immediate environment of the Sa-Sb binary after periastron passage. This may suggest an increase in nonthermal emission from magnetic interaction, gravitational disruption of the circumstellar disks as the stars passed through periastron, or both of these phenomena. We also detected structures in the compact (24 au radius), thermal dust disk around T Tau N. In particular, we identify a crescent-shaped emission excess just outside a shallow gap at 12 au radius that appears to move at Keplerian speed. Future measurement of dust spectral indices can clarify the origin of increased and variable millimeter emission in the environment of the T Tau S binary.

astro-ph.SR↗

arXiv2025

Astronomical Optical Interferometry from the Lunar Surface

The lunar surface is a compelling location for large, distributed optical facilities, with significant advantages over orbital facilities for high spatial resolution astrophysics. The serious development of mission concepts is timely because of the confluence of multiple compelling factors. Lunar access technology is maturing rapidly, in the form of both US-based crewed and uncrewed landers, as well as international efforts. Associated with this has been a definitive maturation of astronomical optical interferometry technologies at Earth-based facilities over the past three decades, enabling exquisitely sharp views on the universe previously unattainable, though limited at present by the Earth's atmosphere. Importantly, the increasing knowledge and experience base about lunar surface operations indicates it is not just suitable, but highly attractive for lunar telescope arrays.

astro-ph.IM↗

arXiv2025

Surprise non-detection of Upsilon Andromedae b with MIRC-X and MYSTIC at the CHARA Array

Ground-based long baseline interferometry is a powerful tool for characterizing exoplanets which are too close to their host star to be imaged with single-dish telescopes. The CHARA Array can resolve companions down to 0.5 milli-arcseconds, allowing us in principle to directly measure the near-infrared spectra of non-transiting "Hot Jupiter" exoplanets. We present data taken with the MIRC-X and MYSTIC instruments at the CHARA Array on the Hot Jupiter Upsilon Andromedae b. By resolving the star-planet system, we attempt to directly detect the flux from the planet. We describe our self-calibration methods for modeling systematics in the closure phase data, which allows us to reach sub-degree precision. Through combining multiple nights of data across two MIRC-X runs in 2019 and 2021, we achieved a very tentative detection of Ups And b in the H-band at a planet/star contrast of 2-3 x 10^-4. Unfortunately, we cannot confirm this detection with 2021 MYSTIC data in the K-band, or in a 2023 joint MIRC-X and MYSTIC dataset. We run updated global circulation models and create post-processed spectra for this planet, and report the resulting model spectra in H- and K-bands as a function of orbital phase. We then run planetary injection tests to explore H/K-band contrast limits, and find that we can confidently recover planets down to a planet/star contrast of 1-2 x 10^-4. We show that we are probing contrasts fainter than predicted by the model, making our non-detection surprising. We discuss prospects for the future in using this method to characterize companions with interferometry.

astro-ph.EP↗

arXiv2025

The Dynamic Inner Disk of a Planet Forming Star

Planets are a natural byproduct of the stellar formation process, resulting from local aggregations of material within the disks surrounding young stars. Whereas signatures of gas-giant planets at large orbital separations have been observed and successfully modeled within protoplanetary disks, the formation pathways of planets within their host star's future habitable zones remain poorly understood. Analyzing multiple nights of observations conducted over a short, two-month span with the MIRC-X and PIONIER instruments at the CHARA Array and VLTI, respectively, we uncover a highly active environment at the inner-edge of the planet formation region in the disk of HD 163296. In particular, we localize and track the motion of a disk feature near the dust-sublimation radius with a pattern speed of less than half the local Keplerian velocity, providing a potential glimpse at the planet formation process in action within the inner astronomical unit. We emphasize that this result is at the edge of what is currently possible with available optical interferometric techniques and behooves confirmation with a temporally dense followup observing campaign.

astro-ph.SR↗

arXiv2024

Open loop calibration and closed loop non-perturbative estimation of the lateral errors of an adaptive optics system: examples with GRAVITY+ and CHARA experimental data

Performances of an adaptive optics (AO) system are directly linked with the quality of its alignment. During the instrument calibration, having open loop fast tools with a large capture range are necessary to quickly assess the system misalignment and to drive it towards a state allowing to close the AO loop. During operation, complex systems are prone to misalignments (mechanical flexions, rotation of optical elements, etc.) that potentially degrade the AO performances, creating a need for a monitoring tool to tackle their driftage. In this work, we first present an improved perturbative method to quickly assess large lateral errors in open loop. It uses the spatial correlation of the measured interaction matrix of a limited number of 2D spatial modes with a synthetic model. Then, we introduce a novel solution to finely measure and correct these lateral errors via the closed loop telemetry. Non-perturbative, this method consequently does not impact the science output of the instrument. It is based on the temporal correlation of 2D spatial frequencies in the deformable mirror commands. It is model-free (no need of an interaction matrix model) and sparse in the Fourier space, making it fast and easily scalable to complex systems such as future extremely large telescopes. Finally, we present some results obtained on the development bench of the GRAVITY+ extreme AO system (Cartesian grid, 1432 actuators). In addition, we show with on-sky results gathered with CHARA and GRAVITY/CIAO that the method is adaptable to non-conventional AO geometries (hexagonal grids, 60 actuators).

eess.SP↗

arXiv2024

Recent and Upcoming Upgrades for MIRC-X and MYSTIC on the CHARA Array

MIRC-X and MYSTIC are six-telescope near-infrared beam (1.08-2.38 ${\mu}$m) combiners at the CHARA Array on Mt Wilson CA, USA. Ever since the commissioning of MIRC-X (J and H bands) in 2018 and MYSTIC (K bands) in 2021, they have been the most popular and over-subscribed instruments at the array. Observers have been able to image stellar objects with sensitivity down to 8.1 mag in H and 7.8 mag in K-band under the very best conditions. In 2022 MYSTIC was upgraded with a new ABCD mode using the VLTI/GRAVITY 4-beam integrated optics chip, with the goal of improving the sensitivity and calibration. The ABCD mode has been used to observe more than 20 T Tauri stars; however, the data pipeline is still being developed. Alongside software upgrades, we detail planned upgrades to both instruments in this paper. The main upgrades are: 1) Adding a motorized filter wheel to MIRC-X along with new high spectral resolution modes 2) Updating MIRC-X optics to allow for simultaneous 6T J+H observations 3) Removing the warm window between the spectrograph and the warm optics in MYSTIC 4) Adding a 6T ABCD mode to MIRC-X in collaboration with CHARA/SPICA 5) Updating the MIRC-X CRED-ONE camera funded by Prof. Kraus from U. Exeter 6) Carrying out science verification of the MIRC-X polarization mode 7) Developing new software for ABCD-mode data reduction and more efficient calibration routines. We expect these upgrades to not only improve the observing experience, but also increase the sensitivity by 0.4 mag in J+H-bands, and 1 mag in K-band.

astro-ph.IM↗

arXiv2024

MoonLITE: a CLPS-delivered NASA Astrophysics Pioneers lunar optical interferometer for sensitive, milliarcsecond observing

MoonLITE (Lunar InTerferometry Explorer) is an Astrophysics Pioneers proposal to develop, build, fly, and operate the first separated-aperture optical interferometer in space, delivering sub-mas science results. MoonLITE will leverage the Pioneers opportunity for utilizing NASA's Commercial Lunar Payload Services (CLPS) to deliver an optical interferometer to the lunar surface, enabling unprecedented discovery power by combining high spatial resolution from optical interferometry with deep sensitivity from the stability of the lunar surface. Following landing, the CLPS-provided rover will deploy the pre-loaded MoonLITE outboard optical telescope 100 meters from the lander's inboard telescope, establishing a two-element interferometric observatory with a single deployment. MoonLITE will observe targets as faint as 17th magnitude in the visible, exceeding ground-based interferometric sensitivity by many magnitudes, and surpassing space-based optical systems resolution by a factor of 50 times. The capabilities of MoonLITE open a unique discovery space that includes direct size measurements of the smallest, coolest stars and substellar brown dwarfs; searches for close-in stellar companions orbiting exoplanet-hosting stars that could confound our understanding and characterization of the frequency of Earth-like planets; direct size measurements of young stellar objects and characterization of the terrestrial planet-forming regions of these young stars; measurements of the inner regions and binary fraction of active galactic nuclei; and a probe of the very nature of spacetime foam itself. A portion of the observing time will also be made available to the broader community via a guest observer program. MoonLITE takes advantage of the CLPS opportunity and delivers an unprecedented combination of sensitivity and angular resolution at the remarkably affordable cost point of Pioneers.

astro-ph.IM↗

arXiv2024

The Orbit and Dynamical Mass of Polaris: Observations with the CHARA Array

The 30 year orbit of the Cepheid Polaris has been followed with observations by the CHARA Array (Center for High Angular Resolution Astronomy) from 2016 through 2021. An additional measurement has been made with speckle interferometry at the Apache Point Observatory. Detection of the companion is complicated by its comparative faintness--an extreme flux ratio. Angular diameter measurements appear to show some variation with pulsation phase. Astrometric positions of the companion were measured with a custom grid-based model-fitting procedure and confirmed with the CANDID software. These positions were combined with the extensive radial velocities discussed by Torres (2023) to fit an orbit. Because of the imbalance of the sizes of the astrometry and radial velocity datasets, several methods of weighting are discussed. The resulting mass of the Cepheid is 5.13$\pm$ 0.28 $M_\odot$. Because of the comparatively large eccentricity of the orbit (0.63), the mass derived is sensitive to the value found for the eccentricity. The mass combined with the distance shows that the Cepheid is more luminous than predicted for this mass from evolutionary tracks. The identification of surface spots is discussed. This would give credence to the identification of photometric variation with a period of approximately 120 days as a rotation period. Polaris has some unusual properties (rapid period change, a phase jump, variable amplitude, unusual polarization). However, a pulsation scenario involving pulsation mode, orbital periastron passage (Torres 2023), and low pulsation amplitude can explain these characteristics within the framework of pulsation seen in Cepheids.

astro-ph.SR↗

arXiv2024

The Orbit and Mass of the Cepheid AW Per

The Cepheid AW Per is a component in a multiple system with a long period orbit. The radial velocities of Griffin (2016) cover the 38 year orbit well. An extensive program of interferometry with the CHARA array is reported here, from which the long period orbit is determined. In addition, a {\it Hubble Space Telescope} high resolution spectrum in the ultraviolet demonstrates that the companion is itself a binary with nearly equal mass components. These data combined with a distance from {\it Gaia} provide a mass of the Cepheid (primary) of M$_1$ = 6.79 $\pm$ 0.85 $M_\odot$. The combined mass of the secondary is M$_S$ = 8.79 $\pm$ 0.50 $M_\odot$. The accuracy of the mass will be improved after the fourth Gaia data release expected in approximately two years.

astro-ph.SR↗

arXiv2024

Measuring the Stellar and Planetary Properties of the 51 Eridani System

In order to study exoplanets, a comprehensive characterization of the fundamental properties of the host stars, such as angular diameter, temperature, luminosity, and age, is essential, as the formation and evolution of exoplanets are directly influenced by the host stars at various points in time. In this paper, we present interferometric observations taken of directly imaged planet host 51 Eridani at the CHARA Array. We measure the limb-darkened angular diameter of HD 29391 to be $\theta_{\rm LD} = 0.450\pm 0.006 \rm ~mas$ and combining with the Gaia zero-point corrected parallax, we get a stellar radius of $1.45 \pm 0.02 \rm~R_{\odot}$. We use the PARSEC isochrones to estimate an age of $23.2^{+1.7}_{-2.0} \rm ~Myr$ and a mass of $1.550^{+0.006}_{-0.005}\rm ~M_{\odot}$. The age and mass agree well with values in the literature, determined through a variety of methods ranging from dynamical age trace-backs to lithium depletion boundary methods. We derive a mass of $4.1 \pm 0.4\rm ~M_{Jup}$ for 51 Eri b using the Sonora Bobcat models, which further supports the possibility of 51 Eri b forming under either the hot-start formation model or the warm-start formation model.

astro-ph.EP↗

arXiv2023

Imaging the warped dusty disk wind environment of SU Aurigae with MIRC-X

SU Aurigae is a widely studied T Tauri star and here we present original state-of-the-art interferometric observations with better uv and baseline coverage than previous studies. We aim to investigate the characteristics of the circumstellar material around SU Aur, constrain the disk geometry, composition and inner dust rim structure. The MIRC-X instrument at CHARA is a 6 telescope optical beam combiner offering baselines up to 331 m. We undertook image reconstruction for model-independent analysis, and fitted geometric models such as Gaussian and ring distributions. Additionally, the fitting of radiative transfer models constrains the physical parameters of the disk. Image reconstruction reveals a highly inclined disk with a slight asymmetry consistent with inclination effects obscuring the inner disk rim through absorption of incident star light on the near-side and thermal re-emission/scattering of the far-side. Geometric models find that the underlying brightness distribution is best modelled as a Gaussian with a FWHM of $1.53\pm0.01 \mathrm{mas}$ at an inclination of $56.9\pm0.4^\circ$ and minor axis position angle of $55.9\pm0.5^\circ$. Radiative transfer modelling shows a flared disk with an inner radius at 0.16 au which implies a grain size of $0.14 \mathrm{\mu m}$ assuming astronomical silicates and a scale height of 9.0 au at 100 au. In agreement with literature, only the dusty disk wind successfully accounts for the NIR excess by introducing dust above the mid-plane. Our results confirm and provide better constraints than previous inner disk studies of SU Aurigae. We confirm the presence of a dusty disk wind in the cicumstellar environment, the strength of which is enhanced by a late infall event which also causes very strong misalignments between the inner and outer disks.

astro-ph.SR↗

arXiv2022

The Small Separation A-Star Companion Population: First Results with CHARA/MIRC-X

We present preliminary results from our long-baseline interferometry (LBI) survey to constrain the multiplicity properties of intermediate-mass A-type stars within 80pc. Previous multiplicity studies of nearby stars exhibit orbital separation distributions well-fitted with a log-normal with peaks > 15au, increasing with primary mass. The A-star multiplicity survey of De Rosa et al. (2014), sensitive beyond 30au but incomplete below 100 au, found a log-normal peak around 390au. Radial velocity surveys of slowly-rotating, chemically peculiar Am stars identified a significant number of very close companions with periods $\leq$ 5 days, ~ 0.1au, a result similar to surveys of O- and B-type primaries. With the improved performance of LBI techniques, we can probe these close separations for normal A-type stars where other surveys are incomplete. Our initial sample consists of 27 A-type primaries with estimated masses between 1.44-2.49M$_{\odot}$ and ages 10-790Myr, which we observed with the MIRC-X instrument at the CHARA Array. We use the open source software CANDID to detect five companions, three of which are new, and derive a companion frequency of 0.19$^{+0.11}_{-0.06}$ over mass ratios 0.25-1.0 and projected separations 0.288-5.481 au. We find a probability of 10$^{-6}$ that our results are consistent with extrapolations based on previous models of the A-star companion population, over mass ratios and separations sampled. Our results show the need to explore these very close separations to inform our understanding of stellar formation and evolution processes.

astro-ph.SR↗

arXiv2022

CHARA/SPICA: a 6-telescope visible instrument for the CHARA Array

With a possible angular resolution down to 0.1-0.2 millisecond of arc using the 330 m baselines and the access to the 600-900 nm spectral domain, the CHARA Array is ideally configured for focusing on precise and accurate fundamental parameters of stars. CHARA/SPICA (Stellar Parameters and Images with a Cophased Array) aims at performing a large survey of stars all over the Hertzsprung-Russell diagram. This survey will also study the effects of the different kinds of variability and surface structure on the reliability of the extracted fundamental parameters. New surface-brightness-colour relations will be extracted from this survey, for general purposes on distance determination and the characterization of faint stars. SPICA is made of a visible 6T fibered instrument and of a near-infrared fringe sensor. In this paper, we detail the science program and the main characteristics of SPICA-VIS. We present finally the initial performance obtained during the commissioning.

astro-ph.IM↗

arXiv2022

The dust sublimation region of the Type 1 AGN NGC4151 at a hundred micro-arcsecond scale as resolved by the CHARA Array interferometer

The nuclear region of Type 1 AGNs has only been partially resolved so far in the near-infrared (IR) where we expect to see the dust sublimation region and the nucleus directly without obscuration. Here we present the near-IR interferometric observation of the brightest Type 1 AGN NGC4151 at long baselines of ~250 m using the CHARA Array, reaching structures at hundred micro-arcsecond scales. The squared visibilities decrease down to as low as ~0.25, definitely showing that the structure is resolved. Furthermore, combining with the previous visibility measurements at shorter baselines but at different position angles, we show that the structure is elongated *perpendicular* to the polar axis of the nucleus, as defined by optical polarization and a linear radio jet. A thin-ring fit gives a minor/major axis ratio of ~0.7 at a radius ~0.5 mas (~0.03 pc). This is consistent with the case where the sublimating dust grains are distributed preferentially in an equatorial plane in a ring-like geometry, viewed at an inclination angle of ~40 deg. Recent mid-IR interferometric finding of polar-elongated geometry at a pc scale, together with a larger-scale polar outflow as spectrally resolved by the HST, would generally suggest a dusty, conical and hollow outflow being launched presumably in the dust sublimation region. This might potentially lead to a polar-elongated morphology in the near-IR, as opposed to the results here. We discuss a possible scenario where an episodic, one-off anisotropic acceleration formed a polar-fast and equatorially-slow velocity distribution, having lead to an effectively flaring geometry as we observe.

astro-ph.GA↗

arXiv2022

ARMADA II: Further Detections of Inner Companions to Intermediate Mass Binaries with Micro-Arcsecond Astrometry at CHARA and VLTI

We started a survey with CHARA/MIRC-X and VLTI/GRAVITY to search for low mass companions orbiting individual components of intermediate mass binary systems. With the incredible precision of these instruments, we can detect astrometric "wobbles" from companions down to a few tens of micro-arcseconds. This allows us to detect any previously unseen triple systems in our list of binaries. We present the orbits of 12 companions around early F to B-type binaries, 9 of which are new detections and 3 of which are first astrometric detections of known RV companions. The masses of these newly detected components range from 0.45-1.3 solar masses. Our orbits constrain these systems to a high astrometric precision, with median residuals to the orbital fit of 20-50 micro-arcseconds in most cases. For 7 of these systems we include newly obtained radial velocity data, which help us to identify the system configuration and to solve for masses of individual components in some cases. Although additional RV measurements are needed to break degeneracy in the mutual inclination, we find that the majority of these inner triples are not well-aligned with the wide binary orbit. This hints that higher mass triples are more misaligned compared to solar and lower mass triples, though a thorough study of survey biases is needed. We show that the ARMADA survey is extremely successful at uncovering previously unseen companions in binaries. This method will be used in upcoming papers to constrain companion demographics in intermediate mass binary systems down to the planetary mass regime.

astro-ph.SR↗

arXiv2022

Design of the new CHARA instrument SILMARIL: pushing the sensitivity of a 3-beam combiner in the H- and K-bands

Optical interferometry is a powerful technique to achieve high angular resolution. However, its main issue is its lack of sensitivity, compared to other observation techniques. Efforts have been made in the previous decade to improve the sensitivity of optical interferometry, with instruments such as PIONIER and GRAVITY at VLTI, or MIRC-X and MYSTIC at CHARA. While those instruments pushed on sensitivity, their design focus was not the sensitivity but relative astrometric accuracy, imaging capability, or spectral resolution. Our goal is to build an instrument specifically designed to optimize for sensitivity. This meant focusing our design efforts on different parts of the instrument and investigating new technologies and techniques. First, we make use of the low-noise C-RED One camera using e-APD technology and provided by First Light Imaging, already used in the improvement of sensitivity in recent new instruments. We forego the use of single-mode fibers but still favor an image plane design that offers more sensitivity than a pupil plane layout. We also use a minimum number of optical elements to maximize the throughput of the design, using a long focal length cylindrical mirror. We chose to limit our design to 3 beams, to have the capability to obtain closure phases, but not dilute the incoming flux in more beam combinations. We also use in our design an edge filter to have the capability to observe H- and K-band at the same time. We use a low spectral resolution, allowing for group delay fringe tracking but maximizing the SNR of the fringes for each spectral channel. All these elements will lead to a typical limiting magnitude between 10 and 11 in both H- and K-bands.

astro-ph.IM↗

arXiv2022

Characterising the orbit and circumstellar environment of the high-mass binary MWC 166 A

Context: Stellar evolution models are highly dependent on accurate mass estimates, especially for high-mass stars in the early stages of evolution. The most direct method for obtaining model-independent masses is derivation from the orbit of close binaries. Aims: To derive the first astrometric+RV orbit solution for the single-lined spectroscopic binary MWC 166 A, based on CHARA and VLTI near-infrared interferometry over multiple epochs and ~100 archival radial velocity measurements, and to derive fundamental stellar parameters from this orbit. We also sought to model circumstellar activity in the system from K-band spectral lines. Methods: We geometrically modelled the dust continuum to derive astrometry at 13 epochs and constrain individual stellar parameters. We used the continuum models as a base to examine differential phases, visibilities and closure phases over the Br-$\gamma$ and He-I emission lines. Results: Our orbit solution suggests a period of $367.7\pm0.1$ d, twice as long as found with previous RV orbit fits, subsequently constraining the component masses to $M_1=12.2\pm2.2 M_\odot$ and $M_2=4.9\pm0.5 M_\odot$. The line-emitting gas was found to be localised around the primary and is spatially resolved on scales of ~11 stellar radii, with the spatial displacement between the line wings consistent with a rotating disc. Conclusions: The large radius and stable orientation of the line emission are inconsistent with magnetospheric or boundary-layer accretion, but indicate an ionised inner gas disk around MWC 166 Aa. We observe line variability that could be explained either with generic line variability in a Herbig star disc or V/R variations in a decretion disc. We also constrained the age of the system to ~$(7\pm2)\times10^5$ yr, consistent with the system being comprised of a main-sequence primary and a secondary still contracting towards the main sequence.

astro-ph.SR↗