Searcharxiv⌕ Search

arXiv subjects

Gary A. Steele

Publications and source records attributed to Gary A. Steele.

At least 19 recordsLinked to original sources
arXiv2026

Collapse and Inversion of the Josephson Potential in a Strongly Driven Superconducting Circuit

Superconducting circuits embedding Josephson junctions leverage microwave drives for control and measurement of quantum states. Although increasing the drive power is desirable for improving the efficiency of these operations, it eventually triggers unwanted transitions to uncontrolled states. While careful choice of circuit symmetries and parameters can mitigate these effects, the presence of spurious circuit modes spoils the resilience to high power. In this work, we engineer a transmon-resonator system free of any detrimental unwanted transitions. This resilience enables us to access drive powers at which we uncover a remarkable physical phenomenon: the collapse and inversion of the Josephson potential. Through spectroscopy and readout experiments, we confirm that the driven potential goes to zero and inverts as the power increases. The inversion corresponds to the dynamical stabilization of the transmon at its unstable equilibrium point, directly analogous to an inverted pendulum. This result reveals a new limitation of strongly driven superconducting circuits beyond drive-induced transitions. In addition, the dynamical renormalization of the Josephson potential opens up novel avenues for the control of superconducting circuits, and the autonomous stabilization of noise-resilient quantum states.

quant-ph↗
arXiv2026

Magnon polaritons in a van der Waals ferromagnet coupled to a superconducting resonator

Achieving magnon-photon hybridization in the microwave regime is essential for integrating magnetic excitations with superconducting circuits. While this has been extensively demonstrated in bulk magnetic systems, realizing it in two-dimensional van der Waals materials remains challenging due to their reduced magnetic volume and increased dissipation. Here, magnon-photon hybridization is observed in exfoliated flakes of the van der Waals ferromagnet Cr$_2$Ge$_2$Te$_6$, with thicknesses down to 30 nm. The resulting magnon polaritons-hybrid excitations of cavity photons and magnons-are evidenced by reproducible avoided crossings across six devices, enabled by a low-impedance superconducting resonator design. The coupling strength follows the expected square-root dependence on thickness, and extrapolation of this scaling indicates that hybridization in the monolayer limit is within reach.

cond-mat.mes-hall↗
arXiv2025

Evidence for unexpectedly low quasiparticle generation rates across Josephson junctions of driven superconducting qubits

Recent studies find that even drives far below the superconducting gap frequency may cause drive-induced quasiparticle generation (QPG) across Josephson junctions (JJs) of superconducting qubits (SCQs), posing a serious concern for fault-tolerant superconducting quantum computing (FTSQC). Nonetheless, quantitative experimental estimation on QPG rates has remained vague. Here, we investigate QPG using strongly driven SCQs, reaching qubit drive amplitudes up to $2π\times$300 GHz by applying intense drive fields through the readout resonators. The resonator nonlinear responses enable quantification of the energy loss at SCQs, including the contribution from QPG. Surprisingly, the estimated total energy loss rates are far lower than those expected by the Floquet-Markov formalism with QPG as the sole loss mechanism. Meanwhile, calculations that incorporate high-frequency cutoffs (HFCs) in the QPG conductance at approximately 17-20 GHz effectively explain the experimental observations. These results suggest limitations in either the QPG conductance model or the Markovian treatment of the QPG processes. Both possibilities possess crucial implications for handling QPG problems toward FTSQC and for a more deeper understanding of Josephson junctions.

quant-ph↗
arXiv2025

On-chip stencil lithography for superconducting qubits

Improvements in circuit design and more recently in materials and surface cleaning have contributed to a rapid development of coherent superconducting qubits. However, organic resists commonly used for shadow evaporation of Josephson junctions (JJs) pose limitations due to residual contamination, poor thermal stability and compatibility under typical surface-cleaning conditions. To provide an alternative, we developed an inorganic SiO$_2$/Si$_3$N$_4$ on-chip stencil lithography mask for JJ fabrication. The stencil mask is resilient to aggressive cleaning agents and it withstands high temperatures up to 1200°C, thereby opening new avenues for JJ material exploration and interface optimization. To validate the concept, we performed shadow evaporation of Al-based transmon qubits followed by stencil mask lift-off using vapor hydrofluoric acid, which selectively etches SiO$_2$. We demonstrate average $T_1 \approx 75 \pm 11 μ$s over a 200 MHz frequency range in multiple cool-downs for one device, and $T_1 \approx 44\pm 8 μ$s for a second device. These results confirm the compatibility of stencil lithography with state-of-the-art superconducting quantum devices and motivate further investigations into materials engineering, film deposition and surface cleaning techniques.

quant-ph↗
arXiv2025

Magnon-magnon interaction induced by nonlinear spin wave dynamics

We experimentally and theoretically demonstrate that nonlinear spin-wave dynamics can induce an effective resonant interaction between non-resonant magnon modes in a yttrium iron garnet disk. Under strong pumping near the ferromagnetic resonance mode, we observe a spectral splitting that emerges with increasing drive amplitude. This phenomenon is well captured by a theoretical framework based on the linearization of a magnon three-wave mixing Hamiltonian, which at high power leads to parametric Suhl instabilities. The access and control of nonlinear magnon-parametric processes enables the development of experimental platforms in an unexplored parameter regime for both classical and quantum computation protocols.

cond-mat.mes-hall↗
arXiv2025

All-microwave Lamb shift engineering for a fixed frequency multi-level superconducting qubit

It is known that the electromagnetic vacuum is responsible for the Lamb shift, which is a crucial phenomenon in quantum electrodynamics (QED). In circuit QED, the readout or bus resonators that are dispersively coupled can result in a significant Lamb shift of the qubit. However, previous approaches or proposals for controlling the Lamb shift in circuit QED demand overheads in circuit designs or non-perturbative renormalization of the system's eigenbases, which can impose formidable limitations.In this work, we propose and demonstrate an all-microwave method for controlling the Lamb shift of fixed-frequency transmons. We employ the drive-induced longitudinal coupling between the transmon and resonator. By simply using an off-resonant monochromatic drive near the resonator frequency, we can control the net Lamb shift up to 30 MHz and engineer it to zero with the drive-induced longitudinal coupling without facing the aforementioned challenges. Our work establishes an efficient way of engineering the fundamental effects of the electromagnetic vacuum and provides greater flexibility in non-parametric frequency controls of multilevel systems.

quant-ph↗
arXiv2024

Photon-Pressure with an Effective Negative Mass Microwave Mode

Harmonic oscillators belong to the most fundamental concepts in physics and are central to many current research fields such as circuit QED, cavity optomechanics and photon-pressure systems. Here, we engineer a microwave mode in a superconducting LC circuit that mimics the dynamics of a negative mass oscillator, and couple it via photon-pressure to a second low-frequency circuit. We demonstrate that the effective negative mass dynamics lead to an inversion of dynamical backaction and to sideband-cooling of the low-frequency circuit by a blue-detuned pump field, which can be intuitively understood by the inverted energy ladder of a negative mass oscillator.

quant-ph↗
arXiv2023

Apparent nonlinear damping triggered by quantum fluctuations

Nonlinear damping, the change in damping rate with the amplitude of oscillations plays an important role in many electrical, mechanical and even biological oscillators. In novel technologies such as carbon nanotubes, graphene membranes or superconducting resonators, the origin of nonlinear damping is sometimes unclear. This presents a problem, as the damping rate is a key figure of merit in the application of these systems to extremely precise sensors or quantum computers. Through measurements of a superconducting resonator, we show that from the interplay of quantum fluctuations and the nonlinearity of a Josephson junction emerges a power-dependence in the resonator response which closely resembles nonlinear damping. The phenomenon can be understood and visualized through the flow of quasi-probability in phase space where it reveals itself as dephasing. Crucially, the effect is not restricted to superconducting circuits: we expect that quantum fluctuations or other sources of noise give rise to apparent nonlinear damping in systems with a similar conservative nonlinearity, such as nano-mechanical oscillators or even macroscopic systems.

quant-ph↗
arXiv2023

Resolving non-perturbative renormalization of a microwave-dressed weakly anharmonic superconducting qubit

Microwave driving is a ubiquitous technique for superconducting qubits (SCQs), but the dressed states description based on the conventionally used perturbation theory cannot fully capture the dynamics in the strong driving limit. Comprehensive studies beyond these approximations applicable to transmon-based circuit quantum electrodynamics (QED) systems are unfortunately rare as the relevant works have been mainly limited to single-mode or two-state systems. In this work, we investigate a microwave-dressed transmon coupled to a single quantized mode over a wide range of driving parameters. We reveal that the interaction between the transmon and resonator as well as the properties of each mode is significantly renormalized in the strong driving limit. Unlike previous theoretical works, we establish a non-recursive, and non-Floquet theory beyond the perturbative regimes, which excellently quantifies the experiments. This work expands our fundamental understanding of dressed cavity QED-like systems beyond the conventional approximations. Our work will also contribute to fast quantum gate implementation, qubit parameter engineering, and fundamental studies on driven nonlinear systems.

quant-ph↗
arXiv2023

Two-photon sideband transition in a driven quantum Rabi model : Quantitative discussions with derived longitudinal drives and beyond the rotating wave approximation

In this work, we analytically and numerically study the sideband transition dynamics of the driven quantum Rabi model (QRM). We focus in particular on the conditions when the external transverse drive fields induce first-order sideband transitions. Inducing sideband transitions between two different systems is an essential technique for various physical models, including the QRM. However, despite its importance, a precise analytical study has not been reported yet that successfully explains the sideband transition rates in a driven QRM applicable for all system parameter configurations. In our study, we analytically derive the sideband transition rates based on second-order perturbation theory, not relying on the rotating wave approximation (RWA) \cite{RWA}. Our formula are valid for all ranges of drive frequencies and system's parameters. Our analytical derived formula agrees well with the numerical results in a regime of moderate drive amplitudes. Interestingly, we have found a non-trivial longitudinal drive effect derived from the transverse drive Hamiltonian. This accounts for significant corrections to the sideband transition rates that are expected without considering the derived longitudinal effect. Using this approach, one can precisely estimate the sideband transition rates in the QRM not confining themselves within specific parameter regimes. This provides important contributions for understanding experiments described by the driven QRM.

quant-ph↗
arXiv2023

Designing spin and orbital sources of Berry curvature at oxide interfaces

Quantum materials can display physical phenomena rooted in the geometry of electronic wavefunctions. The corresponding geometric tensor is characterized by an emergent field known as Berry curvature (BC). Large BCs typically arise when electronic states with different spin, orbital or sublattice quantum numbers hybridize at finite crystal momentum. In all materials known to date, the BC is triggered by the hybridization of a single type of quantum number. Here, we report the discovery of the first material system having both spin and orbital-sourced BC: LaAlO$_3$/SrTiO$_3$ interfaces grown along the [111] direction. We detect independently these two sources and directly probe the BC associated to the spin quantum number through measurements of an anomalous planar Hall effect. The observation of a nonlinear Hall effect with time-reversal symmetry signals large orbital-mediated BC dipoles. The coexistence of different forms of BC enables the combination of spintronic and optoelectronic functionalities in a single material.

cond-mat.mes-hall↗
arXiv2022

Parametrically enhanced interactions and non-trivial bath dynamics in a photon-pressure Kerr amplifier

Photon-pressure coupling between two superconducting circuits is a promising platform for investigating radiation-pressure coupling in novel parameter regimes and for the development of radio-frequency (RF) quantum photonics and quantum-limited RF sensing. So far, the intrinsic Josephson nonlinearity of photon-pressure coupled circuits has not been considered a potential resource for enhanced devices or novel experimental schemes. Here, we implement photon-pressure coupling between a RF circuit and a microwave cavity containing a superconducting quantum interference device (SQUID) which can be operated as a Josephson parametric amplifier (JPA). We demonstrate a Kerr-based enhancement of the photon-pressure single-photon coupling rate and an increase of the cooperativity by one order of magnitude in the amplifier regime. In addition, we characterize the upconverted and Kerr-amplified residual thermal fluctuations of the RF circuit, and observe that the intracavity amplification reduces the measurement imprecision. Finally, we demonstrate that RF mode sideband-cooling is surprisingly not limited to the effective amplifier mode temperature arising from quantum noise amplification, which we explain by non-trivial bath dynamics due to a two-stage amplification process. Our results demonstrate how Kerr nonlinearities and in particular Josephson parametric amplification can be utilized as resource for enhanced photon-pressure systems and Kerr cavity optomechanics.

quant-ph↗
arXiv2022

Superconducting electro-mechanics to test Diósi-Penrose effects of general relativity in massive superpositions

Attempting to reconcile general relativity with quantum mechanics is one of the great undertakings of contemporary physics. Here we present how the incompatibility between the two theories arises in the simple thought experiment of preparing a heavy object in a quantum superposition. Following Penrose's analysis of the problem, we determine the requirements on physical parameters to perform experiments where both theories potentially interplay. We use these requirements to compare different systems, focusing on mechanical oscillators which can be coupled to superconducting circuits.

quant-ph↗
arXiv2021

Acceleration and deceleration of quantum dynamics based on inter-trajectory travel with fast-forward scaling theory

Quantum information processing requires fast manipulations of quantum systems in order to overcome dissipative effects. We propose a method to accelerate quantum dynamics and obtain a target state in a shorter time relative to unmodified dynamics, and apply the theory to a system consisting of two linearly coupled qubits. We extend the technique to accelerate quantum adiabatic evolution in order to rapidly generate a desired target state, thereby realizing a shortcut to adiabaticity. Further, we address experimental limitations to the rate of change of control parameters for quantum devices which often limit one's ability to generate a desired target state with high fidelity. We show that an initial state following decelerated dynamics can reach a target state while varying control parameters more slowly, enabling more experimentally feasible driving schemes.

quant-ph↗
arXiv2021

Four-wave-cooling to the single phonon level in Kerr optomechanics

The field of cavity optomechanics has achieved groundbreaking photonic control and detection of mechanical oscillators, based on their coupling to linear electromagnetic modes. Lately, however, there is an uprising interest in exploring cavity nonlinearities as a powerful new resource in radiation-pressure interacting systems. Here, we present a flux-mediated optomechanical device combining a nonlinear Josephson-based superconducting quantum interference cavity with a mechanical nanobeam. We demonstrate how the intrinsic Kerr nonlinearity of the microwave circuit can be used for a counter-intuitive blue-detuned sideband-cooling scheme based on multi-tone cavity driving and intracavity four-wave-mixing. Based on the large single-photon coupling rate of the system of up to $g_0 = 2π\cdot 3.6\,$kHz and a high mechanical quality factor $Q_\mathrm{m} \approx 4\cdot 10^{5}$, we achieve an effective four-wave cooperativity of $\mathcal{C}_\mathrm{fw} > 100$ and demonstrate four-wave cooling of the mechanical oscillator close to its quantum groundstate, achieving a final occupancy of $n_\mathrm{m} \sim 1.6$. Our results significantly advance the recently developed platform of flux-mediated optomechanics and demonstrate how cavity Kerr nonlinearities can be utilized for novel control schemes in cavity optomechanics.

quant-ph↗
arXiv2021

Phonon-number resolution of voltage-biased mechanical oscillators with weakly-anharmonic superconducting circuits

Observing quantum phenomena in macroscopic objects, and the potential discovery of a fundamental limit in the applicability of quantum mechanics, has been a central topic of modern experimental physics. Highly coherent and heavy micro-mechanical oscillators controlled by superconducting circuits are a promising system for this task. Here, we focus in particular on the electrostatic coupling of motion to a weakly anharmonic circuit, namely the transmon qubit. In the case of a megahertz mechanical oscillator coupled to a gigahertz transmon, we explain the difficulties in bridging the large electro-mechanical frequency gap. To remedy this issue, we explore the requirements to reach phonon-number resolution in the resonant coupling of a megahertz transmon and a mechanical oscillator.

quant-ph↗
arXiv2020

Tuneable and weakly-invasive probing of a superconducting resonator based onelectromagnetically induced transparency

Superconducting cavities with high quality factors play an essential role in circuit quantum electrodynamics and quantum computing. In measurements of the the intrinsic loss rates of high frequency modes, it can be challenging to design an appropriate coupling to the measurement circuit in such a way that the resulting signal is sufficiently strong but also that this coupling does not lead to unwanted loading circuit, obscuring the intrinsic internal loss rates. Here, we propose and demonstrate a spectroscopic probe of high-Q resonators based on the phenomena of electromagnetically-induced transparency (EIT) between the resonator and qubit in the weak dispersive coupling regime. Applying a sideband drive signal to the qubit, we observe an interference dip originated from EIT in the qubit spectroscopy, originating from the quantum interference between the qubit probe signal and sideband transition. From the width and the depth of the dip, we are able to extract the single-photon linewidth of the resonator from an analytical model. Working in a previously unexplored regime in which the qubit has a larger linewidth than the resonator reduces the technical challenge of making a high-coherence qubit and is advantageous for remaining in the weakly-invasive limit of coupling to the resonator. Furthermore, the sideband and the dispersive coupling between the resonator and the qubit can be tuned $in~situ$ controlling the strength of the sideband drive power. This $in-situ$ tuneability allows the technique to be applied for efficient measurement of the resonator loss rate for any quality factor below a fixed upper bound, on the order of $10^8$ for our device, allowing a wide range of quality factors to probed using a single design.

quant-ph↗