arXiv subjects

Gavin Dalton

Publications and source records attributed to Gavin Dalton.

At least 19 recordsLinked to original sources

arXiv2025

The WEAVE-TwiLight-Survey: Expanding WEAVE's Reach to Bright and Low-Surface-Density Targets with a Novel Observing Mode

Current-day multi-object spectroscopic surveys are often limited in their ability to observe bright stars due to their low surface densities, resulting in increased observational overheads and reduced efficiency. Addressing this, we have developed a novel observing mode for WEAVE (William Herschel Telescope Enhanced Area Velocity Explorer) that enables efficient observations of low-surface-density target fields without incurring additional overheads from calibration exposures. As a pilot for the new mode, we introduce the WEAVE-TwiLight-Survey (WTLS), focusing on bright exoplanet-host stars and their immediate surroundings on the sky. High observational efficiency is achieved by superimposing multiple low-target-density fields and allocating the optical fibres in this configuration. We use a heuristic method to define fields relative to a central guide star, which serves as a reference for their superposition. Suitable guide fibres for each merged configuration are selected using a custom algorithm. Test observations have been carried out, demonstrating the feasibility of the new observing mode. We show that merged field configurations can be observed with WEAVE using the proposed method. The approach minimizes calibration times and opens twilight hours to WEAVE's operational schedule. WTLS is built upon the new observing mode and sourced from the ESA PLATO long-duration-phase fields. This survey will result in a homogeneous catalogue of approximately 6300 bright stars, including 62 known planet hosts, laying the groundwork for future elemental abundance studies tracing chemical patterns of planetary formation. This new observing mode (WEAVE-Tumble-Less) expands WEAVE's capabilities to rarely used on-sky time and low-density field configurations without sacrificing efficiency.

astro-ph.IM↗

arXiv2024

HETDEX-LOFAR Spectroscopic Redshift Catalog

We combine the power of blind integral field spectroscopy from the Hobby-Eberly Telescope (HET) Dark Energy Experiment (HETDEX) with sources detected by the Low Frequency Array (LOFAR) to construct the HETDEX-LOFAR Spectroscopic Redshift Catalog. Starting from the first data release of the LOFAR Two-metre Sky Survey (LoTSS), including a value-added catalog with photometric redshifts, we extracted 28,705 HETDEX spectra. Using an automatic classifying algorithm, we assigned each object a star, galaxy, or quasar label along with a velocity/redshift, with supplemental classifications coming from the continuum and emission line catalogs of the internal, fourth data release from HETDEX (HDR4). We measured 9,087 new redshifts; in combination with the value-added catalog, our final spectroscopic redshift sample is 9,710 sources. This new catalog contains the highest substantial fraction of LOFAR galaxies with spectroscopic redshift information; it improves archival spectroscopic redshifts, and facilitates research to determine the [O II] emission properties of radio galaxies from $0.0 < z < 0.5$, and the Ly$\alpha$ emission characteristics of both radio galaxies and quasars from $1.9 < z < 3.5$. Additionally, by combining the unique properties of LOFAR and HETDEX, we are able to measure star formation rates (SFR) and stellar masses. Using the Visible Integral-field Replicable Unit Spectrograph (VIRUS), we measure the emission lines of [O III], [Ne III], and [O II] and evaluate line-ratio diagnostics to determine whether the emission from these galaxies is dominated by AGN or star formation and fit a new SFR-L$_{150MHz}$ relationship.

astro-ph.GA↗

arXiv2022

Optimisation of the WEAVE target assignment algorithm

WEAVE is the new wide-field spectroscopic facility for the prime focus of the William Herschel Telescope in La Palma, Spain. Its fibre positioner is essential for the accurate placement of the spectrograph's ~960-fibre multiplex. To maximise the assignment of its optical fibres, WEAVE uses a simulated annealing algorithm called Configure, which allocates the fibres to targets in the field of view. We have conducted an analysis of the algorithm's behaviour using a subset of mid-tier WEAVE-LOFAR fields, and adjusted the priority assignment algorithm to optimise the total fibres assigned per field, and the assignment of fibres to the higher priority science targets. The output distributions have been examined, to investigate the implications for the WEAVE science teams.

astro-ph.IM↗

arXiv2022

Forecasts for WEAVE-QSO: 3D clustering and connectivity of critical points with Lyman-$α$ tomography

The upcoming WEAVE-QSO survey will target a high density of quasars over a large area, enabling the reconstruction of the 3D density field through Lyman-$α$ tomography over unprecedented volumes smoothed on intermediate scales ($\approx$ 16 Mpc/$h$). We produce mocks of the Lyman-$α$ forest using LyMAS, and reconstruct the 3D density field between sightlines through Wiener filtering in a configuration compatible with the future WEAVE-QSO observations. The fidelity of the reconstruction is assessed by measuring one- and two-point statistics from the distribution of critical points in the cosmic web. In addition, initial Lagrangian statistics are predicted from first principles, and measurements of the connectivity of the cosmic web are performed. The reconstruction captures well the expected features in the auto- and cross-correlations of the critical points. This remains true after a realistic noise is added to the synthetic spectra, even though sparsity of sightlines introduces systematics, especially in the cross-correlations of points with mixed signature. Specifically, for walls and filaments, the most striking clustering features could be measured with up to 4 sigma of significance with a WEAVE-QSO-like survey. Moreover, the connectivity of each peak identified in the reconstructed field is globally consistent with its counterpart in the original field, indicating that the reconstruction preserves the geometry of the density field not only statistically, but also locally. Hence the critical points relative positions within the tomographic reconstruction could be used as standard rulers for dark energy by WEAVE-QSO and similar surveys.

astro-ph.CO↗

arXiv2021

The HETDEX Instrumentation: Hobby-Eberly Telescope Wide Field Upgrade and VIRUS

The Hobby-Eberly Telescope (HET) Dark Energy Experiment (HETDEX) is undertaking a blind wide-field low-resolution spectroscopic survey of 540 square degrees of sky to identify and derive redshifts for a million Lyman-alpha emitting galaxies (LAEs) in the redshift range 1.9 < z < 3.5. The ultimate goal is to measure the expansion rate of the Universe at this epoch, to sharply constrain cosmological parameters and thus the nature of dark energy. A major multi-year wide field upgrade (WFU) of the HET was completed in 2016 that substantially increased the field of view to 22 arcminutes diameter and the pupil to 10 meters, by replacing the optical corrector, tracker, and prime focus instrument package and by developing a new telescope control system. The new, wide-field HET now feeds the Visible Integral-field Replicable Unit Spectrograph (VIRUS), a new low-resolution integral field spectrograph (LRS2), and the Habitable Zone Planet Finder (HPF), a precision near-infrared radial velocity spectrograph. VIRUS consists of 156 identical spectrographs fed by almost 35,000 fibers in 78 integral field units arrayed at the focus of the upgraded HET. VIRUS operates in a bandpass of 3500-5500 Angstroms with resolving power R~800. VIRUS is the first example of large scale replication applied to instrumentation in optical astronomy to achieve spectroscopic surveys of very large areas of sky. This paper presents technical details of the HET WFU and VIRUS, as flowed-down from the HETDEX science requirements, along with experience from commissioning this major telescope upgrade and the innovative instrumentation suite for HETDEX.

astro-ph.IM↗

arXiv2021

The Hobby-Eberly Telescope Dark Energy Experiment (HETDEX) Survey Design, Reductions, and Detections

We describe the survey design, calibration, commissioning, and emission-line detection algorithms for the Hobby-Eberly Telescope Dark Energy Experiment (HETDEX). The goal of HETDEX is to measure the redshifts of over a million Ly$α$ emitting galaxies between 1.88<z<3.52, in a 540 deg^2 area encompassing a co-moving volume of 10.9 Gpc^3. No pre-selection of targets is involved; instead the HETDEX measurements are accomplished via a spectroscopic survey using a suite of wide-field integral field units distributed over the focal plane of the telescope. This survey measures the Hubble expansion parameter and angular diameter distance, with a final expected accuracy of better than 1%. We detail the project's observational strategy, reduction pipeline, source detection, and catalog generation, and present initial results for science verification in the COSMOS, Extended Groth Strip, and GOODS-N fields. We demonstrate that our data reach the required specifications in throughput, astrometric accuracy, flux limit, and object detection, with the end products being a catalog of emission-line sources, their object classifications, and flux-calibrated spectra.

astro-ph.IM↗

arXiv2020

MOSAIC: the high-multiplex and multi-IFU spectrograph for the ELT

MOSAIC is the planned multi-object spectrograph for the 39m Extremely Large Telescope (ELT). Conceived as a multi-purpose instrument, it offers both high multiplex and multi-IFU capabilities at a range of intermediate to high spectral resolving powers in the visible and the near-infrared. MOSAIC will enable unique spectroscopic surveys of the faintest sources, from the oldest stars in the Galaxy and beyond to the first populations of galaxies that completed the reionisation of the Universe--while simultaneously opening up a wide discovery space. In this contribution we present the status of the instrument ahead of Phase B, showcasing the key science cases as well as introducing the updated set of top level requirements and the adopted architecture. The high readiness level will allow MOSAIC to soon enter the construction phase, with the goal to provide the ELT community with a world-class MOS capability as soon as possible after the telescope first light.

astro-ph.IM↗

arXiv2020

Final assembly, metrology, and testing of the WEAVE fibre positioner

WEAVE is the new wide-field spectroscopy facility for the prime focus of the William Herschel Telescope at La Palma, Spain. Its fibre positioner is essential for the accurate placement of the spectrograph's 960 fibre multiplex. We provide an overview of the final assembly and metrology of the fibre positioner, and results of lab commissioning of its robot gantries. A completely new z-gantry for each positioner robot was acquired, with measurements showing a marked improvement in positioning repeatability. We also present the first results of the configuration software testing, and discuss the metrology procedures that must be repeated after the positioner's arrival at the observatory.

astro-ph.IM↗

arXiv2018

The Subaru FMOS galaxy redshift survey (FastSound). V. Intrinsic alignments of emission line galaxies at $z\sim 1.4$

Intrinsic alignments (IA), the coherent alignment of intrinsic galaxy orientations, can be a source of a systematic error of weak lensing surveys. The redshift evolution of IA also contains information about the physics of galaxy formation and evolution. This paper presents the first measurement of IA at high redshift, $z\sim 1.4$, using the spectroscopic catalog of blue star-forming galaxies of the FastSound redshift survey, with the galaxy shape information from the Canada-Hawaii-France telescope lensing survey. The IA signal is consistent with zero with power-law amplitudes fitted to the projected correlation functions for density-shape and shape-shape correlation components, $A_{δ+}=-0.0071\pm 0.1340$ and $A_{++}=-0.0505\pm 0.0848$, respectively. These results are consistent with those obtained from blue galaxies at lower redshifts (e.g., $A_{δ+}=0.0035_{-0.0389}^{+0.0387}$ and $A_{++}=0.0045_{-0.0168}^{+0.0166}$ at $z=0.51$ from the WiggleZ survey). The upper limit of the constrained IA amplitude corresponds to a few percent contamination to the weak-lensing shear power spectrum, resulting in systematic uncertainties on the cosmological parameter estimations by $-0.052<Δσ_8<0.039$ and $-0.039<ΔΩ_m<0.030$.

astro-ph.CO↗

arXiv2016

Constraint on the inflow/outflow rates in star-forming galaxies at z~1.4 from molecular gas observations

We constrain the rate of gas inflow into and outflow from a main-sequence star-forming galaxy at z~1.4 by fitting a simple analytic model for the chemical evolution in a galaxy to the observational data of the stellar mass, metallicity, and molecular gas mass fraction. The molecular gas mass is derived from CO observations with a metallicity-dependent CO-to-H2 conversion factor, and the gas metallicity is derived from the Hα and [NII]λ 6584 emission line ratio. Using a stacking analysis of CO integrated intensity maps and the emission lines of Hα and [NII], the relation between stellar mass, metallicity, and gas mass fraction is derived. We constrain the inflow and outflow rates with least-chi-square fitting of a simple analytic chemical evolution model to the observational data. The best-fit inflow and outflow rates are ~1.7 and ~0.4 in units of star-formation rate, respectively. The inflow rate is roughly comparable to the sum of the star-formation rate and outflow rate, which supports the equilibrium model for galaxy evolution; i.e., all inflow gas is consumed by star formation and outflow.

astro-ph.GA↗

arXiv2016

Developing an integrated concept for the E-ELT Multi-Object Spectrograph (MOSAIC): design issues and trade-offs

We present a discussion of the design issues and trade-offs that have been considered in putting together a new concept for MOSAIC, the multi-object spectrograph for the E-ELT. MOSAIC aims to address the combined science cases for E-ELT MOS that arose from the earlier studies of the multi-object and multi-adaptive optics instruments. MOSAIC combines the advantages of a highly-multiplexed instrument targeting single-point objects with one which has a more modest multiplex but can spatially resolve a source with high resolution (IFU). These will span across two wavebands: visible and near-infrared.

astro-ph.IM↗

arXiv2016

Echidna Mark II: one giant leap for 'tilting spine' fibre positioning technology

The Australian Astronomical Observatory's 'tilting spine' fibre positioning technology has been redeveloped to provide superior performance in a smaller package. The new design offers demonstrated closed-loop positioning errors of 2.8 μm RMS in only five moves (~10 s excluding metrology overheads) and an improved capacity for open-loop tracking during observations. Tilt-induced throughput losses have been halved by lengthening spines while maintaining excellent accuracy. New low-voltage multilayer piezo actuator technology has reduced a spine's peak drive amplitude from ~150 V to <10 V, simplifying the control electronics design, reducing the system's overall size, and improving modularity. Every spine is now a truly independent unit with a dedicated drive circuit and no restrictions on the timing or direction of fibre motion.

astro-ph.IM↗

arXiv2016

The Subaru FMOS Galaxy Redshift Survey (FastSound). II. The Emission Line Catalog and Properties of Emission Line Galaxies

We present basic properties of $\sim$3,300 emission line galaxies detected by the FastSound survey, which are mostly H$α$ emitters at $z \sim$ 1.2-1.5 in the total area of about 20 deg$^2$, with the H$α$ flux sensitivity limit of $\sim 1.6 \times 10^{-16} \rm erg \ cm^{-2} s^{-1}$ at 4.5 sigma. This paper presents the catalogs of the FastSound emission lines and galaxies, which will be open to the public in the near future. We also present basic properties of typical FastSound H$α$ emitters, which have H$α$ luminosities of $10^{41.8}$-$10^{43.3}$ erg/s, SFRs of 20--500 $M_\odot$/yr, and stellar masses of $10^{10.0}$--$10^{11.3}$ $M_\odot$. The 3D distribution maps for the four fields of CFHTLS W1--4 are presented, clearly showing large scale clustering of galaxies at the scale of $\sim$ 100--600 comoving Mpc. Based on 1,105 galaxies with detections of multiple emission lines, we estimate that contamination of non-H$α$ lines is about 4% in the single-line emission galaxies, which are mostly [OIII]$λ$5007. This contamination fraction is also confirmed by the stacked spectrum of all the FastSound spectra, in which H$α$, [NII]$λλ$6548,6583, [SII]$λλ$6717, 6731, and [OI]$λλ$6300,6364 are seen.

astro-ph.GA↗

arXiv2016

The Subaru FMOS galaxy redshift survey (FastSound). IV. New constraint on gravity theory from redshift space distortions at $z\sim 1.4$

We measure the redshift-space correlation function from a spectroscopic sample of 2783 emission line galaxies from the FastSound survey. The survey, which uses the Subaru Telescope and covers the redshift ranges of $1.19<z<1.55$, is the first cosmological study at such high redshifts. We detect clear anisotropy due to redshift-space distortions (RSD) both in the correlation function as a function of separations parallel and perpendicular to the line of sight and its quadrupole moment. RSD has been extensively used to test general relativity on cosmological scales at $z<1$. Adopting a LCDM cosmology with the fixed expansion history and no velocity dispersion $σ_{\rm v}=0$, and using the RSD measurements on scales above 8Mpc/h, we obtain the first constraint on the growth rate at the redshift, $f(z)σ_8(z)=0.482\pm 0.116$ at $z\sim 1.4$ after marginalizing over the galaxy bias parameter $b(z)σ_8(z)$. This corresponds to $4.2σ$ detection of RSD. Our constraint is consistent with the prediction of general relativity $fσ_8\sim 0.392$ within the $1-σ$ confidence level. When we allow $σ_{\rm v}$ to vary and marginalize it over, the growth rate constraint becomes $fσ_8=0.494^{+0.126}_{-0.120}$. We also demonstrate that by combining with the low-z constraints on $fσ_8$, high-z galaxy surveys like the FastSound can be useful to distinguish modified gravity models without relying on CMB anisotropy experiments.

astro-ph.CO↗

arXiv2016

Properties of the Interstellar Medium in Star-Forming Galaxies at z~1.4 revealed with ALMA

We conducted observations of 12CO(J=5-4) and dust thermal continuum emission toward twenty star-forming galaxies on the main sequence at z~1.4 using ALMA to investigate the properties of the interstellar medium. The sample galaxies are chosen to trace the distributions of star-forming galaxies in diagrams of stellar mass-star formation rate and stellar mass-metallicity. We detected CO emission lines from eleven galaxies. The molecular gas mass is derived by adopting a metallicity-dependent CO-to-H2 conversion factor and assuming a CO(5-4)/CO(1-0) luminosity ratio of 0.23. Molecular gas masses and its fractions (molecular gas mass/(molecular gas mass + stellar mass)) for the detected galaxies are in the ranges of (3.9-12) x 10^{10} Msun and 0.25-0.94, respectively; these values are significantly larger than those in local spiral galaxies. The molecular gas mass fraction decreases with increasing stellar mass; the relation holds for four times lower stellar mass than that covered in previous studies, and that the molecular gas mass fraction decreases with increasing metallicity. Stacking analyses also show the same trends. The dust thermal emissions were clearly detected from two galaxies and marginally detected from five galaxies. Dust masses of the detected galaxies are (3.9-38) x 10^{7} Msun. We derived gas-to-dust ratios and found they are 3-4 times larger than those in local galaxies. The depletion times of molecular gas for the detected galaxies are (1.4-36) x 10^{8} yr while the results of the stacking analysis show ~3 x 10^{8} yr. The depletion time tends to decrease with increasing stellar mass and metallicity though the trend is not so significant, which contrasts with the trends in local galaxies.

astro-ph.GA↗

arXiv2015

Learning from history: Adaptive calibration of 'tilting spine' fiber positioners

This paper discusses a new approach for determining the calibration parameters of independently-actuated optical fibers in multi-object astronomical fiber positioning systems. This work comes from the development of a new type of piezoelectric motor intended to enhance the 'tilting spine' fiber positioning technology originally created by the Australian Astronomical Observatory. Testing has shown that the motor's performance can vary depending on the fiber's location within its accessible field, meaning that an individual fiber is difficult calibrate with a one-time routine. Better performance has resulted from constantly updating calibration parameters based on the observed movements of the fiber during normal closed-loop positioning. Over time, location-specific historical data is amassed that can be used to better predict the results of a future fiber movement. This is similar to a technique previously proposed by the Australian Astronomical Observatory, but with the addition of location-specific learning. Results from a prototype system are presented, showing a significant reduction in overall positioning error when using this new approach.

astro-ph.IM↗

arXiv2015

Verification of commercial motor performance for WEAVE at the William Herschel Telescope

WEAVE is a 1000-fiber multi-object spectroscopic facility for the 4.2~m William Herschel Telescope. It will feature a double-headed pick-and-place fiber positioning robot comprising commercially available robotic axes. This paper presents results on the performance of these axes, obtained by testing a prototype system in the laboratory. Positioning accuracy is found to be better than the manufacturer's published values for the tested cases, indicating that the requirement for a maximum positioning error of 8.0~microns is achievable. Field reconfiguration times well within the planned 60 minute observation window are shown to be likely when individual axis movements are combined in an efficient way.

astro-ph.IM↗

arXiv2015

The Subaru FMOS Galaxy Redshift Survey (FastSound). III. The mass-metallicity relation and the fundamental metallicity relation at $z\sim1.4$

We present the results from a large near-infrared spectroscopic survey with Subaru/FMOS (\textit{FastSound}) consisting of $\sim$ 4,000 galaxies at $z\sim1.4$ with significant H$α$ detection. We measure the gas-phase metallicity from the [N~{\sc ii}]$λ$6583/H$α$ emission line ratio of the composite spectra in various stellar mass and star-formation rate bins. The resulting mass-metallicity relation generally agrees with previous studies obtained in a similar redshift range to that of our sample. No clear dependence of the mass-metallicity relation with star-formation rate is found. Our result at $z\sim1.4$ is roughly in agreement with the fundamental metallicity relation at $z\sim0.1$ with fiber aperture corrected star-formation rate. We detect significant [S~{\sc ii}]$λλ$6716,6731 emission lines from the composite spectra. The electron density estimated from the [S~{\sc ii}]$λλ$6716,6731 line ratio ranges from 10 -- 500 cm$^{-3}$, which generally agrees with that of local galaxies. On the other hand, the distribution of our sample on [N~{\sc ii}]$λ$6583/H$α$ vs. [S~{\sc ii}]$λλ$6716,6731/H$α$ is different from that found locally. We estimate the nitrogen-to-oxygen abundance ratio (N/O) from the N2S2 index, and find that the N/O in galaxies at $z\sim1.4$ is significantly higher than the local values at a fixed metallicity and stellar mass. The metallicity at $z\sim1.4$ recalculated with this N/O enhancement taken into account decreases by 0.1 -- 0.2 dex. The resulting metallicity is lower than the local fundamental metallicity relation.

astro-ph.GA↗