Searcharxiv⌕ Search

arXiv subjects

Geert Leus

Publications and source records attributed to Geert Leus.

At least 91 records · Page 5Linked to original sources

Sparse Bayesian Learning for DOA Estimation in Heteroscedastic Noise

The paper considers direction of arrival (DOA) estimation from long-term observations in a noisy environment. In such an environment the noise source might evolve, causing the stationary models to fail. Therefore a heteroscedastic Gaussian noise model is introduced where the variance can vary across observations and sensors. The source amplitudes are assumed independent zero-mean complex Gaussian distributed with unknown variances (i.e. the source powers), inspiring stochastic maximum likelihood DOA estimation. The DOAs of plane waves are estimated from multi-snapshot sensor array data using sparse Bayesian learning (SBL) where the noise is estimated across both sensors and snapshots. This SBL approach is more flexible and performs better than high-resolution methods since they cannot estimate the heteroscedastic noise process. An alternative to SBL is simple data normalization, whereby only the phase across the array is utilized. Simulations demonstrate that taking the heteroscedastic noise into account improves DOA estimation.

eess.SP↗

Near-Optimal Sparse Sensing for Gaussian Detection with Correlated Observations

Detection of a signal under noise is a classical signal processing problem. When monitoring spatial phenomena under a fixed budget, i.e., either physical, economical or computational constraints, the selection of a subset of available sensors, referred to as sparse sensing, that meets both the budget and performance requirements is highly desirable. Unfortunately, the subset selection problem for detection under dependent observations is combinatorial in nature and suboptimal subset selection algorithms must be employed. In this work, different from the widely used convex relaxation of the problem, we leverage submodularity, the diminishing returns property, to provide practical near optimal algorithms suitable for large-scale subset selection. This is achieved by means of low-complexity greedy algorithms, which incur a reduced computational complexity compared to their convex counterparts.

eess.SP↗

Adaptive Graph Signal Processing: Algorithms and Optimal Sampling Strategies

The goal of this paper is to propose novel strategies for adaptive learning of signals defined over graphs, which are observed over a (randomly time-varying) subset of vertices. We recast two classical adaptive algorithms in the graph signal processing framework, namely, the least mean squares (LMS) and the recursive least squares (RLS) adaptive estimation strategies. For both methods, a detailed mean-square analysis illustrates the effect of random sampling on the adaptive reconstruction capability and the steady-state performance. Then, several probabilistic sampling strategies are proposed to design the sampling probability at each node in the graph, with the aim of optimizing the tradeoff between steady-state performance, graph sampling rate, and convergence rate of the adaptive algorithms. Finally, a distributed RLS strategy is derived and is shown to be convergent to its centralized counterpart. Numerical simulations carried out over both synthetic and real data illustrate the good performance of the proposed sampling and reconstruction strategies for (possibly distributed) adaptive learning of signals defined over graphs.

cs.LG↗

Stationary Graph Processes and Spectral Estimation

Stationarity is a cornerstone property that facilitates the analysis and processing of random signals in the time domain. Although time-varying signals are abundant in nature, in many practical scenarios the information of interest resides in more irregular graph domains. This lack of regularity hampers the generalization of the classical notion of stationarity to graph signals. The contribution in this paper is twofold. Firstly, we propose a definition of weak stationarity for random graph signals that takes into account the structure of the graph where the random process takes place, while inheriting many of the meaningful properties of the classical definition in the time domain. Our definition requires that stationary graph processes can be modeled as the output of a linear graph filter applied to a white input. We will show that this is equivalent to requiring the correlation matrix to be diagonalized by the graph Fourier transform. Secondly, we analyze the properties of the power spectral density and propose a number of methods to estimate it. We start with nonparametric approaches, including periodograms, window-based average periodograms, and filter banks. We then shift the focus to parametric approaches, discussing the estimation of moving-average (MA), autoregressive (AR) and ARMA processes. Finally, we illustrate the power spectral density estimation in synthetic and real-world graphs.

eess.SY↗

The Dual Graph Shift Operator: Identifying the Support of the Frequency Domain

Contemporary data is often supported by an irregular structure, which can be conveniently captured by a graph. Accounting for this graph support is crucial to analyze the data, leading to an area known as graph signal processing (GSP). The two most important tools in GSP are the graph shift operator (GSO), which is a sparse matrix accounting for the topology of the graph, and the graph Fourier transform (GFT), which maps graph signals into a frequency domain spanned by a number of graph-related Fourier-like basis vectors. This alternative representation of a graph signal is denominated the graph frequency signal. Several attempts have been undertaken in order to interpret the support of this graph frequency signal, but they all resulted in a one-dimensional interpretation. However, if the support of the original signal is captured by a graph, why would the graph frequency signal have a simple one-dimensional support? That is why, for the first time, we propose an irregular support for the graph frequency signal, which we coin the dual graph. The dual GSO leads to a better interpretation of the graph frequency signal and its domain, helps to understand how the different graph frequencies are related and clustered, enables the development of better graph filters and filter banks, and facilitates the generalization of classical SP results to the graph domain.

cs.IT↗

Consistent Sensor, Relay, and Link Selection in Wireless Sensor Networks

In wireless sensor networks, where energy is scarce, it is inefficient to have all nodes active because they consume a non-negligible amount of battery. In this paper we consider the problem of jointly selecting sensors, relays and links in a wireless sensor network where the active sensors need to communicate their measurements to one or multiple access points. Information messages are routed stochastically in order to capture the inherent reliability of the broadcast links via multiple hops, where the nodes may be acting as sensors or as relays. We aim at finding optimal sparse solutions where both, the consistency between the selected subset of sensors, relays and links, and the graph connectivity in the selected subnetwork are guaranteed. Furthermore, active nodes should ensure a network performance in a parameter estimation scenario. Two problems are studied: sensor and link selection; and sensor, relay and link selection. To solve such problems, we present tractable optimization formulations and propose two algorithms that satisfy the previous network requirements. We also explore an extension scenario: only link selection. Simulation results show the performance of the algorithms and illustrate how they provide a sparse solution, which not only saves energy but also guarantees the network requirements.

cs.IT↗

Filtering Random Graph Processes Over Random Time-Varying Graphs

Graph filters play a key role in processing the graph spectra of signals supported on the vertices of a graph. However, despite their widespread use, graph filters have been analyzed only in the deterministic setting, ignoring the impact of stochastic- ity in both the graph topology as well as the signal itself. To bridge this gap, we examine the statistical behavior of the two key filter types, finite impulse response (FIR) and autoregressive moving average (ARMA) graph filters, when operating on random time- varying graph signals (or random graph processes) over random time-varying graphs. Our analysis shows that (i) in expectation, the filters behave as the same deterministic filters operating on a deterministic graph, being the expected graph, having as input signal a deterministic signal, being the expected signal, and (ii) there are meaningful upper bounds for the variance of the filter output. We conclude the paper by proposing two novel ways of exploiting randomness to improve (joint graph-time) noise cancellation, as well as to reduce the computational complexity of graph filtering. As demonstrated by numerical results, these methods outperform the disjoint average and denoise algorithm, and yield a (up to) four times complexity redution, with very little difference from the optimal solution.

eess.SY↗

Graph Sampling for Covariance Estimation

In this paper the focus is on subsampling as well as reconstructing the second-order statistics of signals residing on nodes of arbitrary undirected graphs. Second-order stationary graph signals may be obtained by graph filtering zero-mean white noise and they admit a well-defined power spectrum whose shape is determined by the frequency response of the graph filter. Estimating the graph power spectrum forms an important component of stationary graph signal processing and related inference tasks such as Wiener prediction or inpainting on graphs. The central result of this paper is that by sampling a significantly smaller subset of vertices and using simple least squares, we can reconstruct the second-order statistics of the graph signal from the subsampled observations, and more importantly, without any spectral priors. To this end, both a nonparametric approach as well as parametric approaches including moving average and autoregressive models for the graph power spectrum are considered. The results specialize for undirected circulant graphs in that the graph nodes leading to the best compression rates are given by the so-called minimal sparse rulers. A near-optimal greedy algorithm is developed to design the subsampling scheme for the non-parametric and the moving average models, whereas a particular subsampling scheme that allows linear estimation for the autoregressive model is proposed. Numerical experiments on synthetic as well as real datasets related to climatology and processing handwritten digits are provided to demonstrate the developed theory.

cs.IT↗

Decentralized Prediction-Correction Methods for Networked Time-Varying Convex Optimization

We develop algorithms that find and track the optimal solution trajectory of time-varying convex optimization problems which consist of local and network-related objectives. The algorithms are derived from the prediction-correction methodology, which corresponds to a strategy where the time-varying problem is sampled at discrete time instances and then a sequence is generated via alternatively executing predictions on how the optimizers at the next time sample are changing and corrections on how they actually have changed. Prediction is based on how the optimality conditions evolve in time, while correction is based on a gradient or Newton method, leading to Decentralized Prediction-Correction Gradient (DPC-G) and Decentralized Prediction-Correction Newton (DPC-N). We extend these methods to cases where the knowledge on how the optimization programs are changing in time is only approximate and propose Decentralized Approximate Prediction-Correction Gradient (DAPC-G) and Decentralized Approximate Prediction-Correction Newton (DAPC-N). Convergence properties of all the proposed methods are studied and empirical performance is shown on an application of a resource allocation problem in a wireless network. We observe that the proposed methods outperform existing running algorithms by orders of magnitude. The numerical results showcase a trade-off between convergence accuracy, sampling period, and network communications.

math.OC↗

Multi-Layer Precoding: A Potential Solution for Full-Dimensional Massive MIMO Systems

Massive multiple-input multiple-output (MIMO) systems achieve high sum spectral efficiency by offering an order of magnitude increase in multiplexing gains. In time division duplexing systems, however, the reuse of uplink training pilots among cells results in additional channel estimation error, which causes downlink inter-cell interference, even when large numbers of antennas are employed. Handling this interference with conventional network MIMO techniques is challenging due to the large channel dimensionality. Further, the implementation of large antenna precoding/combining matrices is associated with high hardware complexity and power consumption. In this paper, we propose multi-layer precoding to enable efficient and low complexity operation in full-dimensional massive MIMO, where a large number of antennas is used in two dimensions. In multi-layer precoding, the precoding matrix of each base station is written as a product of a number of precoding matrices, each one called a layer. Multi-layer precoding (i) leverages the directional characteristics of large-scale MIMO channels to manage inter-cell interference with low channel knowledge requirements, and (ii) allows for an efficient implementation using low-complexity hybrid analog/digital architectures. We present a specific multi-layer precoding design for full-dimensional massive MIMO systems. The performance of this precoding design is analyzed and the per-user achievable rate is characterized for general channel models. The asymptotic optimality of the proposed multi-layer precoding design is then proved for some special yet important channels. Numerical simulations verify the analytical results and illustrate the potential gains of multi-layer precoding compared to traditional pilot-contaminated massive MIMO solutions.

cs.IT↗

2-Dimensional Finite Impulse Response Graph-Temporal Filters

Finite impulse response (FIR) graph filters play a crucial role in the field of signal processing on graphs. However, when the graph signal is time-varying, the state of the art FIR graph filters do not capture the time variations of the input signal. In this work, we propose an extension of FIR graph filters to capture also the signal variations over time. By considering also the past values of the graph signal, the proposed FIR graph filter extends naturally to a 2-dimensional filter, capturing jointly the signal variations over the graph and time. As a particular case of interest we focus on 2-dimensional separable graph-temporal filters, which can be implemented in a distributed fashion at the price of higher communication costs. This allows us to give filter specifications and perform the design independently in the graph and temporal domain. The work is concluded by analyzing the proposed approach for stochastic graph signals, where the first and second order moments of the output signal are characterized.

eess.SY↗

Autoregressive Moving Average Graph Filtering

One of the cornerstones of the field of signal processing on graphs are graph filters, direct analogues of classical filters, but intended for signals defined on graphs. This work brings forth new insights on the distributed graph filtering problem. We design a family of autoregressive moving average (ARMA) recursions, which (i) are able to approximate any desired graph frequency response, and (ii) give exact solutions for tasks such as graph signal denoising and interpolation. The design philosophy, which allows us to design the ARMA coefficients independently from the underlying graph, renders the ARMA graph filters suitable in static and, particularly, time-varying settings. The latter occur when the graph signal and/or graph are changing over time. We show that in case of a time-varying graph signal our approach extends naturally to a two-dimensional filter, operating concurrently in the graph and regular time domains. We also derive sufficient conditions for filter stability when the graph and signal are time-varying. The analytical and numerical results presented in this paper illustrate that ARMA graph filters are practically appealing for static and time-varying settings, as predicted by theoretical derivations.

cs.LG↗

Learning Sparse Graphs Under Smoothness Prior

In this paper, we are interested in learning the underlying graph structure behind training data. Solving this basic problem is essential to carry out any graph signal processing or machine learning task. To realize this, we assume that the data is smooth with respect to the graph topology, and we parameterize the graph topology using an edge sampling function. That is, the graph Laplacian is expressed in terms of a sparse edge selection vector, which provides an explicit handle to control the sparsity level of the graph. We solve the sparse graph learning problem given some training data in both the noiseless and noisy settings. Given the true smooth data, the posed sparse graph learning problem can be solved optimally and is based on simple rank ordering. Given the noisy data, we show that the joint sparse graph learning and denoising problem can be simplified to designing only the sparse edge selection vector, which can be solved using convex optimization.

cs.LG↗

A Class of Prediction-Correction Methods for Time-Varying Convex Optimization

This paper considers unconstrained convex optimization problems with time-varying objective functions. We propose algorithms with a discrete time-sampling scheme to find and track the solution trajectory based on prediction and correction steps, while sampling the problem data at a constant rate of $1/h$, where $h$ is the length of the sampling interval. The prediction step is derived by analyzing the iso-residual dynamics of the optimality conditions. The correction step adjusts for the distance between the current prediction and the optimizer at each time step, and consists either of one or multiple gradient steps or Newton steps, which respectively correspond to the gradient trajectory tracking (GTT) or Newton trajectory tracking (NTT) algorithms. Under suitable conditions, we establish that the asymptotic error incurred by both proposed methods behaves as $O(h^2)$, and in some cases as $O(h^4)$, which outperforms the state-of-the-art error bound of $O(h)$ for correction-only methods in the gradient-correction step. Moreover, when the characteristics of the objective function variation are not available, we propose approximate gradient and Newton tracking algorithms (AGT and ANT, respectively) that still attain these asymptotical error bounds. Numerical simulations demonstrate the practical utility of the proposed methods and that they improve upon existing techniques by several orders of magnitude.

cs.IT↗

Sensor Selection for Estimation with Correlated Measurement Noise

In this paper, we consider the problem of sensor selection for parameter estimation with correlated measurement noise. We seek optimal sensor activations by formulating an optimization problem, in which the estimation error, given by the trace of the inverse of the Bayesian Fisher information matrix, is minimized subject to energy constraints. Fisher information has been widely used as an effective sensor selection criterion. However, existing information-based sensor selection methods are limited to the case of uncorrelated noise or weakly correlated noise due to the use of approximate metrics. By contrast, here we derive the closed form of the Fisher information matrix with respect to sensor selection variables that is valid for any arbitrary noise correlation regime, and develop both a convex relaxation approach and a greedy algorithm to find near-optimal solutions. We further extend our framework of sensor selection to solve the problem of sensor scheduling, where a greedy algorithm is proposed to determine non-myopic (multi-time step ahead) sensor schedules. Lastly, numerical results are provided to illustrate the effectiveness of our approach, and to reveal the effect of noise correlation on estimation performance.

stat.AP↗

Subsampling for Graph Power Spectrum Estimation

In this paper we focus on subsampling stationary random processes that reside on the vertices of undirected graphs. Second-order stationary graph signals are obtained by filtering white noise and they admit a well-defined power spectrum. Estimating the graph power spectrum forms a central component of stationary graph signal processing and related inference tasks. We show that by sampling a significantly smaller subset of vertices and using simple least squares, we can reconstruct the power spectrum of the graph signal from the subsampled observations, without any spectral priors. In addition, a near-optimal greedy algorithm is developed to design the subsampling scheme.

cs.IT↗

Reconstruction of Graph Signals through Percolation from Seeding Nodes

New schemes to recover signals defined in the nodes of a graph are proposed. Our focus is on reconstructing bandlimited graph signals, which are signals that admit a sparse representation in a frequency domain related to the structure of the graph. Most existing formulations focus on estimating an unknown graph signal by observing its value on a subset of nodes. By contrast, in this paper, we study the problem of reconstructing a known graph signal using as input a graph signal that is non-zero only for a small subset of nodes (seeding nodes). The sparse signal is then percolated (interpolated) across the graph using a graph filter. Graph filters are a generalization of classical time-invariant systems and represent linear transformations that can be implemented distributedly across the nodes of the graph. Three setups are investigated. In the first one, a single simultaneous injection takes place on several nodes in the graph. In the second one, successive value injections take place on a single node. The third one is a generalization where multiple nodes inject multiple signal values. For noiseless settings, conditions under which perfect reconstruction is feasible are given, and the corresponding schemes to recover the desired signal are specified. Scenarios leading to imperfect reconstruction, either due to insufficient or noisy signal value injections, are also analyzed. Moreover, connections with classical interpolation in the time domain are discussed. The last part of the paper presents numerical experiments that illustrate the results developed through synthetic graph signals and two real-world signal reconstruction problems: influencing opinions in a social network and inducing a desired brain state in humans.

cs.SI↗

Compressed Sensing Based Multi-User Millimeter Wave Systems: How Many Measurements Are Needed?

Millimeter wave (mmWave) systems will likely employ directional beamforming with large antenna arrays at both the transmitters and receivers. Acquiring channel knowledge to design these beamformers, however, is challenging due to the large antenna arrays and small signal-to-noise ratio before beamforming. In this paper, we propose and evaluate a downlink system operation for multi-user mmWave systems based on compressed sensing channel estimation and conjugate analog beamforming. Adopting the achievable sum-rate as a performance metric, we show how many compressed sensing measurements are needed to approach the perfect channel knowledge performance. The results illustrate that the proposed algorithm requires an order of magnitude less training overhead compared with traditional lower-frequency solutions, while employing mmWave-suitable hardware. They also show that the number of measurements need to be optimized to handle the trade-off between the channel estimate quality and the training overhead.

cs.IT↗