arXiv subjects

Gelu Costin

Publications and source records attributed to Gelu Costin.

8 recordsLinked to original sources

arXiv2026

Diamond-to-graphite transformation under hypersonic impact

Diamond to graphite transformation is a complex kinetically driven process which has been studied under various conditions for its fundamental importance. We report the transformation of diamond embedded ceramic matrix composites during hypersonic impact. Diamond particles embedded in cubic boron nitride matrix provide a superhard composite that was subjected to high impact collisions of metal projectiles travelling at speeds reaching Mach 8.45. Our observations suggest that the energy absorption and fracture of the composite is primarily enabled via the phase change of diamond into graphite. Characterization of the impact-fractured composite shows transformed diamond particles and provides details of the shock-induced phase transformation and the nature of diamond-graphite interfaces formed during rapid phase change. The study provides new understanding of phase transformation of diamond under extreme conditions.

cond-mat.mtrl-sci↗

arXiv2026

Alignment behavior of 2D diopsides (d-silicates) under the influence of an AC electric field

Controlling the alignment of two dimensional (2D) materials is crucial for optimizing their electronic and mechanical properties in next generation devices. This study explores how electric fields can manipulate the orientation of 2D diopside (CaMgSi2O6) flakes, a flexible silicate material, through a phenomenon called flexoelectricity, where applied voltage generates mechanical strain. We exfoliated diopside crystals into ultrathin flakes, placed them on microelectrodes, and used AC electric fields to induce alignment via acoustic strain. Raman spectroscopy showed that the flakes reoriented/realigned under the field, with vibrational peaks weakening most at high frequencies (10 MHz). Electrical tests revealed this alignment improves conductivity by 20-30%, as straightened flakes create better pathways for current flow. Fully atomistic molecular dynamics simulations further explained how these flakes naturally align on surfaces within picoseconds, matching our experimental observations. Together, these findings demonstrate a practical way to tune diopside properties using electric fields, opening doors for its use in flexible electronics, sensors, and energy devices.

cond-mat.mes-hall↗

arXiv2025

Nanoscale mechanics and ultralow Friction of natural 2D silicates: Biotite and Rhodonite

Two-dimensional (2D) silicates have emerged as a promising class of ultrathin materials, expanding the landscape of 2D systems beyond conventional van der Waals crystals. Their unique crystal chemistries and structural anisotropies make them attractive for applications ranging from sensors and flexoelectric devices to drug delivery and catalysis. To unlock their full potential, it is critical to understand their thickness-dependent mechanical properties within the family of 2D silicates. In this study, we investigate the nanomechanical and frictional behaviors of two structurally distinct natural silicates: layered Biotite and chain-structured Rhodonite. Using atomic force microscopy (AFM), we found that Rhodonite exhibits nearly ten times higher adhesion force and modulus response compared to Biotite. Despite this, Biotite demonstrates superior frictional performance, with ultrathin (5 nm) flakes showing a remarkably low coefficient of friction ($\sim 0.6 \times 10^{-3}$) versus Rhodonite ($\sim 3.6 \times 10^{-3}$). To further elucidate interlayer adhesion, density functional theory (DFT) calculations with Hubbard correction were employed. These findings offer valuable insights into the design and selection of 2D silicates for advanced mechanical and tribological applications.

cond-mat.mtrl-sci↗

arXiv2025

Defect Engineered Layer Dependent Nonlinear Optical Response in Two Dimensional Muscovite for Efficient Optical Limiting

Light-matter interactions in two-dimensional (2D) materials have gained significant interest due to their distinctive optical and electronic properties. Recently, silicates have emerged as a promising new class of 2D materials, but their nonlinear optical properties remain largely unexplored. In this study, we demonstrate layer-dependent nonlinear absorption and optical limiting capabilities of 2D muscovite using femtosecond laser excitation at 450 nm. The two-photon absorption (TPA) coefficient is highly sensitive to both the number of layers and excitation intensity, increasing markedly from (3.91+/-0.06)x10^3 cm GW^-1 in multilayer structures to (6.94+/-0.17)x10^5 cm GW^-1 in the monolayer limit at a peak intensity of 68 GW cm^-2, highlighting a strong layer-dependent enhancement in nonlinear absorption. Additionally, monolayer muscovite exhibits an optical limiting threshold of 1.46 mJ cm^-2, outperforming graphene and other 2D dichalcogenides. This enhanced TPA arises from quantum confinement and intrinsic lattice defects that facilitate nonlinear optical transitions. Density functional theory reveals that liquid-phase exfoliation disrupts potassium interlayers and induces oxygen vacancies, generating mid-gap electronic states that significantly enhance TPA. These insights open new avenues for designing low-fluence, high-efficiency optical limiters using 2D silicates.

physics.optics↗

arXiv2025

Emamectin benzoate sensing using vivianenes (2D vivianites)

The excessive application of pesticides, particularly the overreliance on insecticides for the protection of desirable crops from pests, has posed a significant threat to both ecological systems and human health due to environmental pollution. This research outlines a comprehensive approach to recognizing and quantifying the presence of insecticides through the application of spectroscopic and electrochemical sensing methods. The detection of Emamectin benzoate (EB), a commonly used insecticide, was performed utilizing vivianenes, a 2D phosphate that has been mechanically exfoliated from the naturally occurring vivianite minerals. This investigation examined the structural and compositional characteristics of vivianenes, utilizing a range of characterization methods. The spectroscopic analyses reveal the molecular interactions and structural modifications that take place during the interaction of EB with the 2D template. Electrochemical investigations employing cyclic voltammetry were performed for different concentrations of EB to enable real-time monitoring of the pesticide. The modified sensing electrode using vivianene demonstrated a linear range of from 50 mg/L to 10 micro g/L, effectively detecting EB molecules at levels significantly below the hazardous threshold. Fully atomistic molecular dynamics simulations were also carried out to obtain further insights into the interaction mechanisms of the EB with the vivianites, and the results corroborate the adsorption mechanism. Our results highlight the potential application of 2D phosphate minerals as advanced sensors to enhance agricultural monitoring and promote sustainable development.

physics.chem-ph↗

arXiv2022

Two-dimensional (2D) d-Silicates from abundant natural minerals

In the last decade, the materials community has been exploring new 2D materials (graphene, metallene, TMDs, TMCs, MXene, among others) that have unique physical and chemical properties. Recently, a new family of 2D materials, the so-called 2D silicates, have been proposed. They are predicted to exhibit exciting properties (such as high catalytic activity, piezoelectricity, and 2D magnetism). In the current work, we demonstrate a generic approach to the synthesis of large-scale 2D silicates from selected minerals, such as Diopside (d). Different experimental techniques were used to confirm the existence of the 2D structures (named 2D-d-silicates). DFT simulations were also used to gain insight into the structural features and energy harvesting mechanisms (flexoelectric response generating voltage up to 10 V). The current approach is completely general and can be utilized for large-scale synthesis of 2D silicates and their derivatives, whose large-scale syntheses have been elusive.

cond-mat.mtrl-sci↗

arXiv2021

Apparent Ferromagnetism in Exfoliated Ultra-thin Pyrite Sheets

Experimental evidence for ferromagnetic ordering in isotropic atomically thin two-dimensional crystals has been missing until a bilayer Cr2Ge2Te6, and a three-atom thick monolayer CrI3 are shown to retain ferromagnetic ordering at finite temperatures. Here, we demonstrate successful isolation of a non-van der Waals type ultra-thin nanosheet of FeS2 derived from naturally occurring pyrite mineral (FeS2) by means of liquid-phase exfoliation. Structural characterizations imply that (111) oriented sheets are predominant and is supported theoretically by means of density functional theory surface energy calculations. Spin-polarized density theory calculations further predicted that (111) oriented three-atom thick pyrite sheet has a stable ferromagnetic ground state different from its diamagnetic bulk counterpart. This theoretical finding is evaluated experimentally employing low temperature superconducting quantum interference device measurements and observed an anomalous ferromagnetic kind of behavior.

cond-mat.mtrl-sci↗

arXiv2019

Effect of synthesis conditions on the electrical resistivity of TiSe$_2$

Dilute impurities and growth conditions can drastically affect the transport properties of TiSe$_2$, especially below the charge density wave transition. In this paper, we discuss the effects of cooling rate, annealing time and annealing temperature on the transport properties of TiSe$_2$: slow cooling of polycrystalline TiSe$_2$ post-synthesis drastically increases the low temperature resistivity, which is in contrast to the metallic behavior of single-crystalline TiSe$_2$ due to charge doping from the residual iodine transport agent. A logarithmic increase of resistivity upon cooling and negative magnetoresistance with a sharp cusp around zero field are observed for the first time for the polycrystalline TiSe$_2$ samples, pointing to weak-localization effects due to low dimensionality. Annealing at low temperatures has a similar, but less drastic effect. Furthermore, rapid quenching of the polycrystalline samples from high temperatures freezes in disorder, leading to a decrease in the low temperature resistivity.

cond-mat.str-el↗