SearcharxivSearch

arXiv subjects

Geng Wang

Publications and source records attributed to Geng Wang.

14 recordsLinked to original sources

Learning-Aided Short Code Design for ISAC based on MIMO-OFDM

This paper proposes a deep learning (DL)-based coded waveform design for integrated sensing and communications (ISAC), enabling flexible trade-offs between communication reliability and ranging accuracy in short-block transmissions. The proposed scheme is built upon a practical multiple-input multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) architecture, where the communication channel state information and the angles of the static targets are assumed available at the transmitter. A transformer-based transmitter encodes input information bits directly into ISAC transmit waveforms to jointly optimize the bit error rate (BER) performance and the delay modified Cramer-Rao bound (MCRB). A corresponding transformer-based receiver is adopted at the communication side to recover the transmitted information bits. We further examine the learned codewords for communication-oriented and sensing-oriented designs, revealing that a balanced ISAC waveform naturally exhibits an intermediate structure between these two extremes. Numerical results illustrate these codeword structures and demonstrate that the proposed design provides substantial trade-off gains over conventional schemes based on standard channel coding and modulation.

cs.IT

Controlling the dynamics of an electric-field-driven droplet on a lubricant-infused micropillar surface

As a non-contact control approach, electric field (EF) can be utilised to drive droplet dynamics on a lubricant-infused surface (LIS), with numerous potential applications ranging from drug manufacturing to 3D printing. However, the resulting droplet dynamics remain poorly understood, especially as there are several possible droplet lubrication states on LIS. Here, we develop a lattice Boltzmann scheme that fully captures the interplay between the interfacial flows and electrohydrodynamics and harness it to investigate EF driven droplets on micropillar LIS. Combining simulations and analytical calculations, we establish quantitative expressions for the drag force and the electric force acting on a moving droplet. We demonstrate that the models can accurately capture droplet dynamics during programmable manipulation, including periodic motion and long-distance transport. Such reliable theoretical models can potentially transform precision control of droplet dynamics by removing the reliance on trial and error tests.

physics.flu-dyn

LocDreamer: World Model-Based Learning for Joint Indoor Tracking and Anchor Scheduling

Accurate, resource-efficient localization and tracking enables numerous location-aware services in next-generation wireless networks. However, existing machine learning-based methods often require large labeled datasets while overlooking spectrum and energy efficiencies. To fill this gap, we propose LocDreamer, a world model (WM)-based framework for joint target tracking and scheduling of localization anchors. LocDreamer learns a WM that captures the latent representation of the target motion and localization environment, thereby generating synthetic measurements to imagine arbitrary anchor deployments. These measurements enable imagination-driven training of both the tracking model and the reinforcement learning (RL)-based anchor scheduler that activates only the most informative anchors, which significantly reduce energy and signaling costs while preserving high tracking accuracy. Experiments on a real-world indoor dataset demonstrate that LocDreamer substantially improves data efficiency and generalization, outperforming conventional Bayesian filter with random scheduling by 37% in tracking accuracy, and achieving 86% of the accuracy of same model trained directly on real data.

eess.SP

High-precision Beam Optics Calculation of the HIAF-BRing Using Measured Fields

The construction of the High Intensity heavy ion Accelerator Facility (HIAF) has been completed, with current efforts focused on subsystem commissioning. Beam commissioning is scheduled for autumn 2025, marking a critical milestone in the HIAF project. This paper presents high-precision optics calculations for the Booster Ring (BRing) of HIAF, a key component for achieving stable heavy-ion beam acceleration. Leveraging high-precision magnetic field data, each magnet is divided into hundreds of slices, thus establishing a high-precision sliced optics model for BRing. Detailed calculations of BRing's optics are presented in this work. Critical parameters including tunes and betatron functions of the lattice based on the measured magnetic fields and those of the ideal lattice have been compared. The results highlight the impact of realistic magnetic field on beam dynamics and provide essential insights for accelerator tuning and optimization. These findings serve as a fundamental reference for beam commissioning and long-term operation, ensuring beam stability and performance reproducibility in HIAF.

physics.acc-ph

Beam-commissioning-oriented optics study of HFRS Phase-I based on measured magnetic field data

The construction of the first phase of the High energy FRagment Separator (HFRS Phase-I) has already been completed and it is anticipated to start beam commissioning in autumn 2025. This paper presents the first order and higher order beam optics calculations for the HFRS Phase-I, using measured magnet data, and evaluates its experimental performance in preparation for beam commissioning. The first order optics of HFRS is calculated based on the sliced magnetic fields and the higher order aberrations are corrected using a self-compiled program. Monte Carlo particle tracking is employed to analyze the beam phase spaces on the focal planes. The experimental performance of the machine is evaluated through Monte Carlo simulations. The beam phase spaces on the focal planes are thoroughly examined, demonstrating that the higher order aberrations have been well corrected. Moreover, the experimental performance of HFRS is evaluated based on the corrected higher order optics, yielding satisfactory results: the secondary beams of interest can be well separated and exhibit high transmission efficiency. This work provides valuable insights for the upcoming beam commissioning of HFRS Phase-I. The effective correction of higher order aberrations and optimized magnet settings lay a solid foundation for future experiments.

physics.acc-ph

A further study on the high-precision optics for HIAF-BRing

The High Intensity heavy ion Accelerator Facility (HIAF) successfully accelerated the 18O6+ beam on October 27, 2025. This paper presents a further simulation study on the high-precision optics, namely sliced optics, of the Booster Ring (BRing) at HIAF based on measured magnetic fields, focusing on three aspects: (1) closed-orbit distortion (COD) and variations in optical parameters induced by errors; (2) closed-orbit correction; (3) dynamic aperture. Specifically, detailed investigations are conducted on COD and optical parameter variations caused by magnet alignment errors and dipole magnet field errors, alongside simulations of closed-orbit correction and detailed calculations of BRing's dynamic aperture. Results show the sliced optics outperforms the original optics in COD control. Without chromaticity correction, its dynamic aperture is superior to the original; after chromaticity correction, it remains comparable. This study provides valuable insights for accelerator tuning and optimization.

physics.acc-ph

Floor-Plan-aided Indoor Localization: Zero-Shot Learning Framework, Data Sets, and Prototype

Machine learning has been considered a promising approach for indoor localization. Nevertheless, the sample efficiency, scalability, and generalization ability remain open issues of implementing learning-based algorithms in practical systems. In this paper, we establish a zero-shot learning framework that does not need real-world measurements in a new communication environment. Specifically, a graph neural network that is scalable to the number of access points (APs) and mobile devices (MDs) is used for obtaining coarse locations of MDs. Based on the coarse locations, the floor-plan image between an MD and an AP is exploited to improve localization accuracy in a floor-plan-aided deep neural network. To further improve the generalization ability, we develop a synthetic data generator that provides synthetic data samples in different scenarios, where real-world samples are not available. We implement the framework in a prototype that estimates the locations of MDs. Experimental results show that our zero-shot learning method can reduce localization errors by around $30$\% to $55$\% compared with three baselines from the existing literature.

eess.SP

Fiber-optic nonlinear wavelength converter for adaptive femtosecond biophotonics

Broad and safe access to ultrafast laser technology has been hindered by the absence of optical fiber-delivered pulses with tunable central wavelength, pulse repetition rate, and pulse width in the picosecond-femtosecond regime. To address this long-standing obstacle, we developed a reliable accessory for femtosecond ytterbium fiber chirped pulse amplifiers, termed as fiber-optic nonlinear wavelength converter (FNWC), as an adaptive optical source for the emergent field of femtosecond biophotonics. This accessory embowers the fixed-wavelength laser to produce fiber delivered ~20 nJ pulses with central wavelength across 950-1150 nm, repetition rate across 1-10 MHz, and pulse width across 40-400 fs, with a long-term stability of >2000 hrs. As a prototypical label-free application in biology and medicine, we demonstrate the utility of FNWC in real-time intravital imaging synergistically integrated with modern machine learning and large-scale fluorescence lifetime imaging microscopy.

physics.optics

Pixelation with concentration-encoded effective photons for molecular optical sectioning microscopy

Quality control in molecular optical sectioning microscopy is indispensable for transforming acquired digital images from qualitative descriptions to quantitative data. Although numerous tools, metrics, and phantoms have been developed, accurate quantitative comparisons of data from different microscopy systems with diverse acquisition conditions remains a challenge. Here, we develop a simple tool based on an absolute measurement of bulk fluorophore solutions with related Poisson photon statistics, to overcome this obstacle. Demonstrated in a prototypical multiphoton microscope, our tool unifies the unit of pixelated measurement to enable objective comparison of imaging performance across different modalities, microscopes, components/settings, and molecular targets. The application of this tool in live specimens identifies an attractive methodology for quantitative imaging, which rapidly acquires low signal-to-noise frames with either gentle illumination or low-concentration fluorescence labeling.

physics.optics

Compact simultaneous label-free autofluorescence multi-harmonic (SLAM) microscopy for user-friendly photodamage-monitored imaging

Label-free nonlinear optical microscopy has become a powerful tool for biomedical research. However, the possible photodamage risk hinder further clinical applications. To reduce these adverse effects, we constructed a new platform of simultaneous label-free autofluorescence multiharmonic (SLAM) microscopy, featuring 5-channel multimodal imaging, inline photodamage monitoring, and pulse repetition-rate tuning. By the use of a birefringent photonic crystal fiber for spectral broadening (rather than supercontinuum generation) and a prism compressor for pulse pre-chirping, this system allows users to independently adjust pulse width, repetition rate, and energy, which is useful for optimizing imaging condition towards no/minimal photodamage. Also, it demonstrates label-free multichannel imaging at one excitation pulse per image pixel and thus paves the way for improving the imaging speed by a faster optical scanner.

physics.optics

Electrostatic-lenses position-sensitive TOF MCP detector for beam diagnostics and new scheme for mass measurements at HIAF

A foil-microchannel plate (MCP) detector, which uses electrostatic lenses and possesses both good position and timing resolutions, has been designed and simulated for beam diagnostics and mass measurements at the next-generation heavy-ion-beam facility HIAF in China. Characterized by low energy loss and good performances of timing and position measurements, it would be located at focal planes in fragment separator HFRS for position monitoring, beam turning, B$ρ$ measurement, and trajectory reconstruction. Moreover, it will benefit the building-up of a magnetic-rigidity-energy-loss-time-of-flight (B$ρ$-$Δ$E-TOF) method at HFRS for high-precision in-flight particle identification (PID) of radioactive isotope (RI) beams on an event-by-event basis. Most importantly, the detector can be utilized for in-ring TOF and position measurements, beam-line TOF measurements at two achromatic foci, and position measurements at a dispersive focus of HFRS, thus making it possible to use two complementary mass measurement methods (isochronous mass spectrometry (IMS) at the storage ring SRing and magnetic-rigidity-time-of-flight (B$ρ$-TOF) at the beam-line HFRS) in one single experimental run.

physics.ins-det

Calculation of the coupled betatron motion introduced by cooler's solenoids of CSRm

Several solenoids are usually installed in electron cooler device to guide the motion of the electron beam in the cooler. However, the solenoids also have influence to the ion beam in the cooler storage ring. The transverse motion of the ion beam in storage ring will become coupled, if the solenoids installed in the electron cooler are not compensated perfectly. In this paper, the coupled transverse motion due to the uncompensated cooler's solenoids of CSRm (The main storage ring in the IMP, Lan Zhou, China) is studied, and the coupled beam envelopes are calculated by a new method.

physics.acc-ph

The Side-Effects of the Space Charge Field Introduced by Hollow Electron Beam in the Electron Cooler of CSRm

Electron cooler is used to improve the quality of the beam in synchrotron, however it also introduces nonlinear electromagnetic field, which cause tuneshift, tunespread and may drive resonances leading to beam loss. In this paper the tuneshift and the tunespread caused by nonlinear electromagnetic field of the hollow electron beam was investigated, and the resonance driving terms of the nonlinear electromagnetic field was analysed. The differences were presented comparing with the solid electron beam. The calculations were performed for $^{238}U^{32+}$ ions of energy 1.272MeV stored in CSRm, using the parameters given in table1. The conclusion is that in this situation nonlinear field caused by the hollow electron beam do not lead to serious resonances.

physics.acc-ph

Closed orbit correction of HIMM synchrotron

The correction of closed orbit has great influence on the operation of synchrotron. The design of correction system is one significant component of lattice design. It is suggested to set BPMs at the peaks of betatron oscillation. The correctors need to be located at the positions where \b{eta} function is large or the sources of large errors. In the simulation of the closed orbit correction of HIMM synchrotron, one important reason affecting the result of horizontal correction is the longitudinal alignment error of dipole magnet. It is advisable to decrease this kind of alignment error while the deflection angle of dipole magnet is large.

physics.acc-ph