arXiv subjects

Geoff T. Campbell

Publications and source records attributed to Geoff T. Campbell.

14 recordsLinked to original sources

arXiv2022

Observation of cross phase modulation in cold atom gradient echo memory

Strong nonlinear interactions between single photons have important applications in optical quantum information processing. Demonstrations of these interactions in cold atomic ensembles have largely been limited to exploiting slow light generated using electromagnetically induced transparency (EIT). However, these EIT implementations have limited achievable phase shifts due to spontaneous emission. Here, we demonstrate and characterize a scheme free from these limitations using gradient echo memory with inferred single photon phase shifts of $0.07\pm0.02$ $μ\text{rad}$. Excellent agreement with theoretical modelling was observed. Degradation of memory efficiency was observed for large phase shifts but strategies to overcome that are presented.

quant-ph↗

arXiv2021

Optical back-action on the photothermal relaxation rate

Photothermal effects can alter the response of an optical cavity, for example, by inducing self-locking behavior or unstable anomalies. The consequences of these effects are often regarded as parasitic and generally cause limited operational performance of the cavity. Despite their importance, however, photothermal parameters are usually hard to characterize precisely. In this work we use an optical cavity strongly coupled to photothermal effects to experimentally observe an optical back-action on the photothermal relaxation rate. This effect, reminiscent of the radiation-pressure-induced optical spring effect in cavity optomechanical systems, uses optical detuning as a fine control to change the photothermal relaxation process. The photothermal relaxation rate of the system can be accordingly modified by more than an order of magnitude. This approach offers an opportunity to obtain precise in-situ estimations of the parameters of the cavity, in a way that is compatible with a wide range of optical resonator platforms. Through this back-action effect we are able to determine the natural photothermal relaxation rate and the effective thermal conductivity of the cavity mirrors with unprecedented resolution.

physics.optics↗

arXiv2021

Observation of Nonlinear Dynamics in an Optical Levitation System

Optical levitation of mechanical oscillators has been suggested as a promising way to decouple the environmental noise and increase the mechanical quality factor. Here, we investigate the dynamics of a free-standing mirror acting as the top reflector of a vertical optical cavity, designed as a testbed for a tripod cavity optical levitation setup. To reach the regime of levitation for a milligram-scale mirror, the optical intensity of the intracavity optical field approaches 3 MW cm$^{-2}$. We identify three distinct optomechanical effects: excitation of acoustic vibrations, expansion due to photothermal absorption, and partial lift-off of the mirror due to radiation pressure force. These effects are intercoupled via the intracavity optical field and induce complex system dynamics inclusive of high-order sideband generation, optical bistability, parametric amplification, and the optical spring effect. We modify the response of the mirror with active feedback control to improve the overall stability of the system.

physics.optics↗

arXiv2020

Optomechanically induced carrier-envelope-phase dependent effects and their analytical solutions

To date, investigations of carrier-envelope-phase (CEP) dependent effects have been limited to optical pulses with few cycles and high intensity, and have not been reported for other types of pulses. Optomechanical systems are shown to have the potential to go beyond these limits. We present an approach using optomechanics to extend the concept of the traditional CEP in the few-cycle regime to mechanical pulses and develop a two-step model to give a physical insight. By adding an auxiliary continuous optical field, we show that a CEP-dependent effect appears even in the multi-cycle regime of mechanical pulses. We obtain the approximated analytical solutions providing full understanding for these optomechanically induced CEP-dependent effects. In addition, our findings show that one can draw on the optomechanical interaction to revive the CEP-dependent effects on optical pulses with an arbitrary number of cycles and without specific intensity requirements. The effects of CEP, broadly extended to encompass few- and multi-cycle optical and mechanical pulses, may stimulate a variety of applications in the preparation of a CEP-stabilized pulse, the generation of ultrasonic pulses with a desired shape, the linear manipulation of optical combs, and more.

physics.optics↗

arXiv2020

Photothermally Induced Transparency

Induced transparency is a common but remarkable effect in optics. It occurs when a strong driving field is used to render an otherwise opaque material transparent. The effect is known as electromagnetically induced transparency in atomic media and optomechanically induced transparency in systems that consist of coupled optical and mechanical resonators. In this work, we introduce the concept of photothermally induced transparency (PTIT). It happens when an optical resonator exhibits non-linear behavior due to optical heating of the resonator or its mirrors. Similar to the established mechanisms for induced transparency, PTIT can suppress the coupling between an optical resonator and a traveling optical field. We further show that the dispersion of the resonator can be modified to exhibit slow or fast light. Because of the relatively slow thermal response, we observe the bandwidth of the PTIT to be $2π\times15.9$ Hz which theoretically suggests a group velocity of as low as $5$ m/s.

physics.optics↗

arXiv2019

Stationary light in atomic media

When ensembles of atoms interact with coherent light fields a great many interesting and useful effects can be observed. In particular, the group velocity of the coherent fields can be modified dramatically. Electromagnetically induced transparency is perhaps the best known example, giving rise to very slow light. Careful tuning of the optical fields can also produce stored light where a light field is mapped completely into a coherence of the atomic ensemble. In contrast to stored light, in which the optical field is extinguished, stationary light is a bright field of light with a group velocity of zero. Stationary light has applications in situations where it is important to maintain an optical field, such as attempts to engineer large nonlinear interactions. In this paper we review the stationary light demonstrations published to date and provide a unified theoretical framework that describes the experimental observations. We also discuss possible applications of stationary light with a particular focus on all-optical phase gates for quantum information technology.

quant-ph↗

arXiv2019

Time-reversed and coherently-enhanced memory: A single-mode quantum atom-optic memory without a cavity

The efficiency of an ensemble-based optical quantum memory depends critically on the strength of the atom-light coupling. An optical cavity is an effective method to enhance atom-light coupling strength, with the drawback that cavities can be difficult to integrate into a memory setup. In this work we show coherent enhancement of atom-light coupling via an interference effect. The light to be absorbed into the atomic ensemble is split and used to drive the atoms from opposite ends of the ensemble. We compare this method theoretically to a cavity enhanced scheme and present experimental results for our coherent enhancement in cold rubidium-87 atoms that show an efficiency of $72\pm5\%$ and a storage lifetime of $110\pm 10$ us.

quant-ph↗

arXiv2018

High-performance Raman memory with spatio-temporal reversal

A number of techniques exist to use an ensemble of atoms as a quantum memory for light. Many of these propose to use backward retrieval as a way to improve the storage and recall efficiency. We report on a demonstration of an off-resonant Raman memory that uses backward retrieval to achieve an efficiency of $65\pm6\%$ at a storage time of one pulse duration. The memory has a characteristic decay time of 60 $μ$s, corresponding to a delay-bandwidth product of $160$.

quant-ph↗

arXiv2018

Multiparameter optimisation of a magneto-optical trap using deep learning

Many important physical processes have dynamics that are too complex to completely model analytically. Optimisation of such processes often relies on intuition, trial-and-error, or the construction of empirical models. Machine learning based on artificial neural networks has emerged as an efficient means to develop empirical models of complex systems. We implement a deep artificial neural network to optimise the magneto-optic cooling and trapping of neutral atomic ensembles. Cold atomic ensembles have become commonplace in laboratories around the world, however, many-body interactions give rise to complex dynamics that preclude precise analytic optimisation of the cooling and trapping process. The solution identified by machine learning is radically different to the smoothly varying adiabatic solutions currently used. Despite this, the solutions vastly outperform best known solutions producing higher optical densities. This may provide a pathway to a new understanding of the dynamics of the cooling and trapping processes in cold atomic ensembles.

quant-ph↗

arXiv2018

Fabrication of Precision Hemispherical Mirrors for Quantum Optics Applications

High precision, high numerical aperture mirrors are desirable for mediating strong atom-light coupling in quantum optics applications and can also serve as important reference surfaces for optical metrology. In this work we demonstrate the fabrication of highly-precise hemispheric mirrors with numerical aperture NA = 0.996. The mirrors were fabricated from aluminum by single-point diamond turning using a stable ultra- precision lathe calibrated with an in-situ white-light interferometer. Our mirrors have a diameter of 25 mm and were characterized using a combination of wide-angle single- shot and small-angle stitched multi-shot interferometry. The measurements show root- mean-square (RMS) form errors consistently below 25 nm. The smoothest of our mirrors has a RMS error of 14 nm and a peak-to-valley (PV) error of 88 nm, which corresponds to a form accuracy of $λ$=50 for visible optics.

physics.ins-det↗

arXiv2016

Dynamical Observations of Self-Stabilising Stationary Light

Precise control of atom-light interactions is vital to many quantum information protocols. In particular, atomic systems can be used to slow and store light to form a quantum memory. Optical storage can be achieved via stopped light, where no optical energy remains in the atoms, or as stationary light, where some optical energy remains resent during storage. In this work, we demonstrate a form of self-stabilising stationary light. From any initial state, our atom-light system evolves to a stable configuration that is devoid of coherent emission from the atoms, yet may contain bright optical excitation. This phenomenon is verified experimentally in a cloud of cold Rb87 atoms. The spinwave in our atomic cloud is imaged from the side allowing direct comparison with theoretical predictions.

quant-ph↗

arXiv2016

Quantum entanglement of angular momentum states with quantum numbers up to 10010

Photons with a twisted phase front carry a quantized amount of orbital angular momentum (OAM) and have become important in various fields of optics, such as quantum and classical information science or optical tweezers. Because no upper limit on the OAM content per photon is known, they are also interesting systems to experimentally challenge quantum mechanical prediction for high quantum numbers. Here, we take advantage of a recently developed technique to imprint unprecedented high values of OAM, namely spiral phase mirrors (SPM), to generate photons with more than 10,000 quanta of OAM. Moreover, we demonstrate quantum entanglement between these large OAM quanta of one photon and the polarization of its partner photon. To our knowledge, this corresponds to entanglement with the largest quantum number that has been demonstrated in an experiment. The results may also open novel ways to couple single photons to massive objects, enhance angular resolution and highlight OAM as a promising way to increase the information capacity of a single photon.

quant-ph↗

arXiv2016

Dual-rail optical gradient echo memory

We introduce a scheme for the parallel storage of frequency separated signals in an optical memory and demonstrate that this dual-rail storage is a suitable memory for high fidelity frequency qubits. The two signals are stored simultaneously in the Zeeman-split Raman absorption lines of a cold atom ensemble using gradient echo memory techniques. Analysis of the split-Zeeman storage shows that the memory can be configured to preserve the relative amplitude and phase of the frequency separated signals. In an experimental demonstration dual-frequency pulses are recalled with 35% efficiency, 82% interference fringe visibility, and 6 degrees phase stability. The fidelity of the frequency-qubit memory is limited by frequency-dependent polarisation rotation and ambient magnetic field fluctuations, our analysis describes how these can be addressed in an alternative configuration.

quant-ph↗

arXiv2015

A mirrorless spinwave resonator

Optical resonance is central to a wide range of optical devices and techniques. In an optical cavity, the round-trip length and mirror reflectivity can be chosen to optimize the circulating optical power, linewidth, and free-spectral range (FSR) for a given application. In this paper we show how an atomic spinwave system, with no physical mirrors, can behave in a manner that is analogous to an optical cavity. We demonstrate this similarity by characterising the build-up and decay of the resonance in the time domain, and measuring the effective optical linewidth and FSR in the frequency domain. Our spinwave is generated in a 20 cm long Rb gas cell, yet it facilitates an effective FSR of 83 kHz, which would require a round-trip path of 3.6 km in a free-space optical cavity. Furthermore, the spinwave coupling is controllable enabling dynamic tuning of the effective cavity parameters.

quant-ph↗