SearcharxivSearch

arXiv subjects

Georg Arnold

Publications and source records attributed to Georg Arnold.

6 recordsLinked to original sources

Electro-optic conversion of itinerant Fock states

Superconducting qubits are a leading candidate for utility-scale quantum computing due to their fast gate speeds and steadily decreasing error rates. The requirement for millikelvin operating temperatures, however, creates a significant scaling bottleneck. Modular architectures using optical fiber links could bridge separate cryogenic nodes, but superconducting circuits do not have coherent optical transitions and microwave-to-optical conversion has not been shown for any non-classical photon state. In this work, we demonstrate the on-demand generation and tomographic reconstruction of itinerant single microwave photons at 8.9 GHz from a superconducting qubit. We upconvert this non-Gaussian state with a transducer added noise below 0.012 quanta and count the converted telecom photons at 193.4 THz with a signal-to-noise ratio of up to 5.1$\pm$1.1. We characterize the trade-offs between throughput and noise, and establish a viable path toward heralded entanglement distribution and gate teleportation. Looking ahead, these results empower existing superconducting devices to take a key role in distributed quantum technologies and heterogeneous quantum systems.

quant-ph

All-optical single-shot readout of a superconducting qubit

The rapid development of superconducting quantum hardware is expected to run into significant I/O restrictions due to the need for large-scale error correction in a cryogenic environment. Classical data centers rely on fiber-optic interconnects to remove similar networking bottlenecks and to allow for reconfigurable, software-defined infrastructures. In the same spirit, ultra-cold electro-optic links have been proposed and used to generate qubit control signals, or to replace cryogenic readout electronics. So far, the latter suffered from either low efficiency, low bandwidth and the need for additional microwave drives, or breaking of Cooper pairs and qubit states. In this work we realize electro-optic microwave photonics at millikelvin temperatures to implement a radio-over-fiber qubit readout that does not require any active or passive cryogenic microwave equipment. We demonstrate all-optical single-shot-readout by means of the Jaynes-Cummings nonlinearity in a circulator-free readout scheme. Importantly, we do not observe any direct radiation impact on the qubit state as verified with high-fidelity quantum-non-demolition measurements despite the absence of shielding elements. This compatibility between superconducting circuits and telecom wavelength light is not only a prerequisite to establish modular quantum networks, it is also relevant for multiplexed readout of superconducting photon detectors and classical superconducting logic. Moreover, this experiment showcases the potential of electro-optic radiometry in harsh environments - an electronics-free sensing principle that extends into the THz regime with applications in radio astronomy, planetary missions and earth observation.

quant-ph

Coherent optical control of a superconducting microwave cavity via electro-optical dynamical back-action

Recent quantum technologies have established precise quantum control of various microscopic systems using electromagnetic waves. Interfaces based on cryogenic cavity electro-optic systems are particularly promising, due to the direct interaction between microwave and optical fields in the quantum regime. Quantum optical control of superconducting microwave circuits has been precluded so far due to the weak electro-optical coupling as well as quasi-particles induced by the pump laser. Here we report the coherent control of a superconducting microwave cavity using laser pulses in a multimode electro-optical device at millikelvin temperature with near-unity cooperativity. Both the stationary and instantaneous responses of the microwave and optical modes comply with the coherent electro-optical interaction, and reveal only minuscule amount of excess back-action with an unanticipated time delay. Our demonstration enables wide ranges of applications beyond quantum transductions, from squeezing and quantum non-demolition measurements of microwave fields, to entanglement generation and hybrid quantum networks.

quant-ph

Entangling microwaves with optical light

Entanglement is a genuine quantum mechanical property and the key resource in currently developed quantum technologies. Sharing this fragile property between superconducting microwave circuits and optical or atomic systems would enable new functionalities but has been hindered by the tremendous energy mismatch of $\sim10^5$ and the resulting mutually imposed loss and noise. In this work we create and verify entanglement between microwave and optical fields in a millikelvin environment. Using an optically pulsed superconducting electro-optical device, we deterministically prepare an itinerant microwave-optical state that is squeezed by $0.72^{+0.31}_{-0.25}$\,dB and violates the Duan-Simon separability criterion by $>5$ standard deviations. This establishes the long-sought non-classical correlations between superconducting circuits and telecom wavelength light with wide-ranging implications for hybrid quantum networks in the context of modularization, scaling, sensing and cross-platform verification.

quant-ph

Quantum-enabled interface between microwave and telecom light

Photons at telecom wavelength are the ideal choice for high density interconnects while solid state qubits in the microwave domain offer strong interactions for fast quantum logic. Here we present a general purpose, quantum-enabled interface between itinerant microwave and optical light. We use a pulsed electro-optic transducer at millikelvin temperatures to demonstrate nanosecond timescale control of the converted complex mode amplitude with an input added noise of $N^{oe}_\textrm{in} = 0.16^{+0.02}_{-0.01}$ ($N^{eo}_\textrm{in} = 1.11^{+0.15}_{-0.07}$) quanta for the microwave-to-optics (reverse) direction. Operating with up to unity cooperativity, this work enters the regime of strong coupling cavity quantum electro-optics characterized by unity internal efficiency and nonlinear effects such as the observed laser cooling of a superconducting cavity mode. The high quantum cooperativity of $C_q>10$ forms the basis for deterministic entanglement generation between superconducting circuits and light.

quant-ph

Cavity quantum electro-optics: Microwave-telecom conversion in the quantum ground state

Fiber optic communication is the backbone of our modern information society, offering high bandwidth, low loss, weight, size and cost, as well as an immunity to electromagnetic interference. Microwave photonics lends these advantages to electronic sensing and communication systems, but - unlike the field of nonlinear optics - electro-optic devices so far require classical modulation fields whose variance is dominated by electronic or thermal noise rather than quantum fluctuations. Here we present a cavity electro-optic transceiver operating in a millikelvin environment with a mode occupancy as low as 0.025 $\pm$ 0.005 noise photons. Our system is based on a lithium niobate whispering gallery mode resonator, resonantly coupled to a superconducting microwave cavity via the Pockels effect. For the highest continuous wave pump power of 1.48 mW we demonstrate bidirectional single-sideband conversion of X band microwave to C band telecom light with a total (internal) efficiency of 0.03 % (0.7 %) and an added output conversion noise of 5.5 photons. The high bandwidth of 10.7 MHz combined with the observed very slow heating rate of 1.1 noise photons s$^{-1}$ puts quantum limited pulsed microwave-optics conversion within reach. The presented device is versatile and compatible with superconducting qubits, which might open the way for fast and deterministic entanglement distribution between microwave and optical fields, for optically mediated remote entanglement of superconducting qubits, and for new multiplexed cryogenic circuit control and readout strategies.

quant-ph