Searcharxiv⌕ Search

arXiv subjects

Georg K. H. Madsen

Publications and source records attributed to Georg K. H. Madsen.

49 records · Page 3Linked to original sources

Phonon transport unveils the prevalent point defects in GaN

Determining the types and concentrations of vacancies present in intentionally doped GaN is a notoriously difficult and long-debated problem. Here we use an unconventional approach, based on thermal transport modeling, to determine the prevalence of vacancies in previous measurements. This allows us to provide conclusive evidence of the recent hypothesis that gallium vacancies in ammonothermally grown samples can be complexed with hydrogen. Our calculations for O-doped and Mg-O co-doped samples yield a consistent picture interlinking dopant and vacancy concentration, carrier density, and thermal conductivity, in excellent agreement with experimental measurements. These results also highlight the predictive power of ab initio phonon transport modeling, and its value for understanding and quantifying defects in semiconductors.

cond-mat.mtrl-sci↗

First-principles quantitative prediction of the lattice thermal conductivity in random semiconductor alloys: the role of force-constant disorder

The standard theoretical understanding of the lattice thermal conductivity, $κ_{\ell}$, of semiconductor alloys assumes that mass disorder is the most important source of phonon scattering. In contrast, we show that the hitherto neglected contribution of force-constant (IFC) disorder is essential to accurately predict the $κ_{\ell}$ of those polar compounds characterized by a complex atomic-scale structure. We have developed an \emph{ab initio} method based on special quasirandom structures and Green's functions, and including the role of IFC disorder, and applied it in order to calculate the $κ_{\ell}$ of $\mathrm{In_{1-x}Ga_xAs}$ and $\mathrm{Si_{1-x}Ge_x}$ alloys. We show that, while for $\mathrm{Si_{1-x}Ge_x}$, phonon-alloy scattering is dominated by mass disorder, for $\mathrm{In_{1-x}Ga_xAs}$, the inclusion of IFC disorder is fundamental to accurately reproduce the experimentally observed $κ_{\ell}$. As the presence of a complex atomic-scale structure is common to most III-V and II-VI random semiconductor alloys, we expect our method to be suitable for a wide class of materials.

cond-mat.mtrl-sci↗

Materials Screening for the Discovery of New Half-Heuslers: Machine Learning versus Ab Initio Methods

Machine learning (ML) is increasingly becoming a helpful tool in the search for novel functional compounds. Here we use classification via random forests to predict the stability of half-Heusler (HH) compounds, using only experimentally reported compounds as a training set. Cross-validation yields an excellent agreement between the fraction of compounds classified as stable and the actual fraction of truly stable compounds in the ICSD. The ML model is then employed to screen 71,178 different 1:1:1 compositions, yielding 481 likely stable candidates. The predicted stability of HH compounds from three previous high throughput ab initio studies is critically analyzed from the perspective of the alternative ML approach. The incomplete consistency among the three separate ab initio studies and between them and the ML predictions suggests that additional factors beyond those considered by ab initio phase stability calculations might be determinant to the stability of the compounds. Such factors can include configurational entropies and quasiharmonic contributions.

cond-mat.mtrl-sci↗

Comparison of the Green-Kubo and homogeneous non-equilibrium molecular dynamics methods for calculating thermal conductivity

Different molecular dynamics methods like the direct method, the Green-Kubo (GK) method and homogeneous non-equilibrium molecular dynamics (HNEMD) method have been widely used to calculate lattice thermal conductivity ($κ_\ell$). While the first two methods have been used and compared quite extensively, there is a lack of comparison of these methods with the HNEMD method. Focusing on the underlying computational parameters, we present a detailed comparison of the GK and HNEMD methods for both bulk and vacancy Si using the Stillinger-Weber potential. For the bulk calculations, we find both methods to perform well and yield $κ_\ell$ within acceptable uncertainties. In case of the vacancy calculations, HNEMD method has a slight advantage over the GK method as it becomes computationally cheaper for lower $κ_\ell$ values. This study could promote the application of HNEMD method in $κ_\ell$ calculations involving other lattice defects like nanovoids, dislocations, interfaces.

cond-mat.mtrl-sci↗

almaBTE: a solver of the space-time dependent Boltzmann transport equation for phonons in structured materials

almaBTE is a software package that solves the space- and time-dependent Boltzmann transport equation for phonons, using only ab-initio calculated quantities as inputs. The program can predictively tackle phonon transport in bulk crystals and alloys, thin films, superlattices, and multiscale structures with size features in the nm-$μ$m range. Among many other quantities, the program can output thermal conductances and effective thermal conductivities, space-resolved average temperature profiles, and heat-current distributions resolved in frequency and space. Its first-principles character makes almaBTE especially well suited to investigate novel materials and structures. This article gives an overview of the program structure and presents illustrative examples for some of its uses.

physics.comp-ph↗

Exceptionally strong phonon scattering by B substitution in cubic SiC

We use ab-initio calculations to predict the thermal conductivity of cubic SiC with different types of defects. An excellent quantitative agreement with previous experimental measurements is found. The results unveil that B$_\mathrm{C}$ substitution has a much stronger effect than any of the other defect types in 3C-SiC, including vacancies. This finding contradicts the prediction of the classical mass-difference model of impurity scattering, according to which the effects of B$_\mathrm{C}$ and N$_\mathrm{C}$ would be similar and much smaller than that of the C vacancy. The strikingly different behavior of the B$_\mathrm{C}$ defect arises from a unique pattern of resonant phonon scattering caused by the broken structural symmetry around the B impurity.

cond-mat.mtrl-sci↗

Lattice thermal conductivity of Ti$_x$Zr$_y$Hf$_{1-x-y}$NiSn half-Heusler alloys calculated from first principles: Key role of nature of phonon modes

In spite of their relatively high lattice thermal conductivity $κ_{\ell}$, the XNiSn (X=Ti, Zr or Hf) half-Heusler compounds are good thermoelectric materials. Previous studies have shown that $κ_{\ell}$ can be reduced by sublattice-alloying on the X-site. To cast light on how the alloy composition affects $κ_\ell$, we study this system using the phonon Boltzmann-transport equation within the relaxation time approximation in conjunction with density functional theory.The effect of alloying through mass-disorder scattering is explored using the virtual crystal approximation to screen the entire ternary Ti$_x$Zr$_{y}$Hf$_{1-x-y}$NiSn phase diagram. The lowest lattice thermal conductivity is found for the Ti$_x$Hf$_{1-x}$NiSn compositions; in particular, there is a shallow minimum centered at Ti$_{0.5}$Hf$_{0.5}$NiSn with $κ_l$ taking values between 3.2 and 4.1 W/mK when the Ti content varies between 20 and 80\%. Interestingly, the overall behavior of mass-disorder scattering in this system can only be understood from a combination of the nature of the phonon modes and the magnitude of the mass variance. Mass-disorder scattering is not effective at scattering acoustic phonons of low energy. By using a simple model of grain boundary scattering, we find that nanostructuring these compounds can scatter such phonons effectively and thus further reduce the lattice thermal conductivity; for instance, Ti$_{0.5}$Hf$_{0.5}$NiSn with a grain size of $L= 100$ nm experiences a 42\% reduction of $κ_{\ell}$ compared to that of the single crystal.

cond-mat.mtrl-sci↗

High-throughput exploration of alloying as design strategy for thermoelectrics

We explore a material design strategy to optimize the thermoelectric power factor. The approach is based on screening the band structure changes upon a controlled volume change. The methodology is applied to the binary silicides and germanides. We first confirm the effect in antifluorite Mg2Si and Mg2Ge where an increased power factor by alloying with Mg2Sn is experimentally established. Within a high-throughput formalism we identify six previously unreported binaries that exhibit an improvement in their transport properties with volume. Among these, hexagonal MoSi2 and orthorhombic Ca2Si and Ca2Ge have the highest increment in zT with volume. We then perform super-cell calculations on special quasi-random structures to investigate the possibility of obtaining thermodynamically stable alloy systems which would produce the necessary volume changes. We find that for Ca2Si and Ca2Ge the solid solutions with the isostructural Ca2Sn readily forms even at low temperatures.

cond-mat.mtrl-sci↗

Optimized Orthogonal Basis Tight Binding. Application to Iron

The formal link between the linear combination of atomic orbitals approach to density functional theory and two-center Slater-Koster tight-binding models is used to derive an orthogonal $d$-band tight-binding model for iron with only two fitting parameters. The resulting tight-binding model correctly predicts the energetic ordering of the low energy iron-phases, including the ferromagnetic BCC, antiferromagnetic FCC, HCP and topologically close-packed structures. The energetics of test structures that were not included in the fit are equally well reproduced as those included, thus demonstrating the transferability of the model. The simple model also gives a good description of the vacancy formation energy in the nonmagnetic FCC and ferromagnetic BCC iron lattices.

cond-mat.mtrl-sci↗

Functional form of the generalized gradient approximation for exchange: The PBE$α$ functional

A new functional form for the exchange enhancement in the generalized gradient approximation within density functional theory is given. The functional form satisfies the constraints used to construct the Perdew-Burke-Ernzerhof (PBE) functional but can be systematically varied using one parameter. This gives the possibility to estimate the reliability of a computational result or to fit the parameter for a certain problem. Compared to other semi-empirical functionals, the present has the advantage that only one physically transparent parameter is used and that the fitted functional will obey the same exact conditions as PBE functional. Furthermore the simple form of the exchange enhancement means that oscillating terms in the exchange potential are avoided.

cond-mat.mtrl-sci↗

Electronic structure and transport in CsBi$_4$Te$_6$

The band structure of the novel low-temperature thermoelectric material, \CBT, is calculated and analyzed using the semi-classic transport equations. It is shown that to obtain a quantitative agreement with measured transport properties a band gap of 0.08 eV must be enforced. A gap in reasonable agreement with experiment was obtained using the generalized gradient functional of Engel and Vosko. We found that the experimental $p$-type sample has a carrier concentration close to optimal. Furthermore the conduction bands have a form equally well suited for thermoelectric properties and we predict that an optimally doped $n$-type compound could have thermoelectric properties exceeding those of the $p$-type.

cond-mat.mtrl-sci↗

BoltzTraP. A code for calculating band-structure dependent quantities

A program for calculating the semi-classic transport coefficients is described. It is based on a smoothed Fourier interpolation of the bands. From this analytical representation we calculate the derivatives necessary for the transport distributions. The method is compared to earlier calculations, which in principle should be exact within Boltzmann theory, and a very convincing agreement is found.

cond-mat.mtrl-sci↗

Charge order in Magnetite. An LDA+$U$ study

The electronic structure of the monoclinic structure of Fe$_3$O$_4$ is studied using both the local density approximation (LDA) and the LDA+$U$. The LDA gives only a small charge disproportionation, thus excluding that the structural distortion should be sufficient to give a charge order. The LDA+$U$ results in a charge disproportion along the c-axis in good agreement with the experiment. We also show how the effective $U$ can be calculated within the augmented plane wave methods.

cond-mat.str-el↗