arXiv subjects

George C. Alexandropoulos

Publications and source records attributed to George C. Alexandropoulos.

At least 73 records · Page 4Linked to original sources

arXiv2025

Far- versus Near-Field RIS Modeling and Beam Design

In this chapter, we investigate the mathematical foundation of the modeling and design of reconfigurable intelligent surfaces (RIS) in both the far- and near-field regimes. More specifically, we first present RIS-assisted wireless channel models for the far- and near-field regimes, discussing relevant phenomena, such as line-of-sight (LOS) and non-LOS links, rich and poor scattering, channel correlation, and array manifold. Subsequently, we introduce two general approaches for the RIS reflective beam design, namely optimization-based and analytical, which offer different degrees of design flexibility and computational complexity. Furthermore, we provide a comprehensive set of simulation results for the performance evaluation of the studied RIS beam designs and the investigation of the impact of the system parameters.

eess.SP↗

arXiv2025

Leaky Wave Antennas for Next Generation Wireless Applications in sub-THz Frequencies: Current Status and Research Challenges

The ever-growing demand for ultra-high data rates, massive connectivity, and joint communication-sensing capabilities in future wireless networks is driving research into sub-terahertz (sub-THz) communications. While these frequency bands offer abundant spectrum, they also pose severe propagation and hardware design challenges, motivating the search for alternative antenna solutions beyond conventional antenna arrays. Leaky-wave antennas (LWAs) have emerged as a promising candidate for sub-THz systems due to their simple feed structure, low fabrication cost, and inherent angle-frequency coupling, which enables frequency-controlled beamsteering with simple hardware. In this article, we review the fundamentals of the LWA technology, highlight their unique properties, and showcase their potential in multi-user wideband sub-THz wireless communications. We present representative studies demonstrating that LWAs can simultaneously support high-rate multi-user communications and accurate localization using only a single antenna element. Finally, several key open challenges are outlined, spanning algorithm design, signal processing, information theory, standardization, and hardware implementation, that need to be addressed to fully harness LWAs as a cost-effective and scalable enabler of next generations of wireless systems.

eess.SP↗

arXiv2025

Joint Active RIS Configuration and User Power Control for Localization: A Neuroevolution-Based Approach

This paper studies user localization aided by a Reconfigurable Intelligent Surface (RIS). A feedback link from the Base Station (BS) to the user is adopted to enable dynamic power control of the user pilot transmissions in the uplink. A novel multi-agent algorithm for the joint control of the RIS phase configuration and the user transmit power is presented, which is based on a hybrid approach integrating NeuroEvolution (NE) and supervised learning. The proposed scheme requires only single-bit feedback messages for the uplink power control, supports RIS elements with discrete responses, and is numerically shown to outperform fingerprinting, deep reinforcement learning baselines and backpropagation-based position estimators.

cs.NI↗

arXiv2025

Joint Communications and Sensing for 6G Satellite Networks: Use Cases and Challenges

Satellite networks (SN) have long provided two fundamental services: global communications and Earth-oriented sensing, supporting applications from connectivity and navigation to disaster management and environmental monitoring. Yet, the accelerating demand for data and the emergence of new applications render the independent evolution of communication and sensing payloads increasingly unsustainable. Joint communications and sensing (JCAS) has emerged as a transformative paradigm, integrating both functions within a unified payload to enhance spectral efficiency, reduce operational costs, and minimize hardware redundancy. Beyond efficiency, this integration creates opportunities for novel services that are infeasible under separate payload designs. This paper motivates the role of JCAS in shaping the sixth-generation (6G) of satellite networks, explores a representative use case to assess its feasibility, and discusses key challenges that must be addressed to unlock its full potential. By highlighting these opportunities inherent to the space environment, we aim to stimulate the development of JCAS as a cornerstone technology for the next-generation space era

eess.SP↗

arXiv2025

Integrating Stacked Intelligent Metasurfaces and Power Control for Dynamic Edge Inference via Over-The-Air Neural Networks

This paper introduces a novel framework for Edge Inference (EI) that bypasses the conventional practice of treating the wireless channel as noise. We utilize Stacked Intelligent Metasurfaces (SIMs) to control wireless propagation, enabling the channel itself to perform over-the-air computation. This eliminates the need for symbol estimation at the receiver, significantly reducing computational and communication overhead. Our approach models the transmitter-channel-receiver system as an end-to-end Deep Neural Network (DNN) where the response of the SIM elements are trainable parameters. To address channel variability, we incorporate a dedicated DNN module responsible for dynamically adjusting transmission power leveraging user location information. Our performance evaluations showcase that the proposed metasurfaces-integrated DNN framework with deep SIM architectures are capable of balancing classification accuracy and power consumption under diverse scenarios, offering significant energy efficiency improvements.

cs.ET↗

arXiv2025

Cooperative Target Detection with AUVs: A Dual-Timescale Hierarchical MARDL Approach

Autonomous Underwater Vehicles (AUVs) have shown great potential for cooperative detection and reconnaissance. However, collaborative AUV communications introduce risks of exposure. In adversarial environments, achieving efficient collaboration while ensuring covert operations becomes a key challenge for underwater cooperative missions. In this paper, we propose a novel dual time-scale Hierarchical Multi-Agent Proximal Policy Optimization (H-MAPPO) framework. The high-level component determines the individuals participating in the task based on a central AUV, while the low-level component reduces exposure probabilities through power and trajectory control by the participating AUVs. Simulation results show that the proposed framework achieves rapid convergence, outperforms benchmark algorithms in terms of performance, and maximizes long-term cooperative efficiency while ensuring covert operations.

cs.RO↗

arXiv2025

Evasive Active Hypothesis Testing with Deep Neuroevolution: The Single- and Multi-Agent Cases

Active hypothesis testing is a thoroughly studied problem that finds numerous applications in wireless communications and sensor networks. In this paper, we focus on one centralized and one decentralized problem of active hypothesis testing in the presence of an eavesdropper. For the centralized problem including a single legitimate agent, we present a new framework based on deep NeuroEvolution (NE), whereas, for the decentralized problem, we develop a novel NE-based method for solving collaborative multi-agent tasks, which, interestingly, maintains all computational benefits of our single-agent NE-based scheme. To further reduce the computational complexity of the latter scheme, a novel multi-agent joint NE and pruning framework is also designed. The superiority of the proposed NE-based evasive active hypothesis testing schemes over conventional active hypothesis testing policies, as well as learning-based methods, is validated through extensive numerical investigations in an example use case of anomaly detection over wireless sensor networks. It is demonstrated that the proposed joint optimization and pruning framework achieves nearly identical performance with its unpruned counterpart, while removing a very large percentage of redundant deep neural network weights.

cs.AI↗

arXiv2025

Active RISs: Modeling and Optimization

Reconfigurable Intelligent Surfaces (RIS)-empowered communication has emerged as a transformative technology for next generation wireless networks, enabling the programmable shaping of the propagation environment. However, conventional RISs are fundamentally limited by the double path loss effect, which severely attenuates the reflected signals. To overcome this, active RIS architectures, capable of amplifying impinging signals, have been proposed. This chapter investigates the modeling, performance analysis, and optimization of active RISs, focusing on two hardware designs: a dual-RIS structure with a single Power Amplifier (PA), and a reflection amplification structure at the unit cell level using tunnel diodes. For the PA-based design, a comprehensive mathematical model is developed, and closed-form expressions for the received signal-to-noise ratio, bit error probability, and Energy Efficiency (EE) are derived. An optimization framework for configuring the phase shifts and amplifier gain is proposed to maximize system capacity under power constraints. Regarding the second design, the integration of a tunnel diode into the unit cell is carefully studied by analyzing its I-V characteristic, enabling the derivation of the negative resistance range and the power consumption model. Furthermore, the intrinsic phase-amplitude coupling of the reflection coefficient is characterized through compact linear algebra formulations, enabling practical optimization of active RISs. Extensive numerical simulations validate the theoretical analyses, demonstrating that active RISs can effectively overcome the double path loss limitation and achieve favorable EE trade-offs compared to passive RISs. Finally, the trade-off between the available power budget and the number of active elements is examined, revealing that a higher number of active elements does not always lead to optimal performance.

cs.IT↗

arXiv2025

Hybrid RISs for Simultaneous Tunable Reflections and Sensing

The concept of smart wireless environments envisions dynamic programmable propagation of information-bearing signals through the deployment of Reconfigurable Intelligent Surfaces (RISs). Typical RIS implementations include metasurfaces with passive unit elements capable to reflect their incident waves in controllable ways. However, this solely reflective operation induces significant challenges in the RIS orchestration from the wireless network. For example, channel estimation, which is essential for coherent RIS-empowered wireless communications, is quite challenging with the available solely reflecting RIS designs. This chapter reviews the emerging concept of Hybrid Reflecting and Sensing RISs (HRISs), which enables metasurfaces to reflect the impinging signal in a controllable manner, while simultaneously sensing a portion of it. The sensing capability of HRISs facilitates various network management functionalities, including channel parameter estimation and localization, while, most importantly, giving rise to computationally autonomous and self-configuring RISs. The implementation details of HRISs are first presented, which are then followed by a convenient mathematical model for characterizing their dual functionality. Then, two indicative applications of HRISs are discussed, one for simultaneous communications and sensing and another that showcases their usefulness for estimating the individual channels in the uplink of a multi-user HRIS-empowered communication system. For both of these applications, performance evaluation results are included validating the role of HRISs for sensing as well as integrated sensing and communications.

eess.SP↗

arXiv2025

Multi-RIS-Empowered Communication Systems: Capacity Analysis and Optimization

In this chapter, using statistical physics methods, asymptotic closed-form expressions for the mean and variance of the mutual information for a multi-antenna transmitter-receiver pair in the presence of multiple Reconfigurable Intelligent Surfaces (RISs) are presented. While nominally valid in the large-system limit, it is shown that the derived Gaussian approximation for the mutual information can be quite accurate, even for modest-sized antenna arrays and metasurfaces. The above results are particularly useful when fast-fading conditions are present, which renders channel estimation challenging. The derived analysis indicates that, when the channel close to an RIS is correlated, for instance due to small angle spread which is reasonable for wireless systems with increasing carrier frequencies, the communication link benefits significantly from statistical RIS optimization, resulting in gains that are surprisingly higher than the nearly uncorrelated case. More importantly, the presented novel asymptotic properties of the correlation matrices of the impinging and outgoing signals at the RISs can be deployed to optimize the metasurfaces without brute-force numerical optimization. The numerical investigation demonstrates that, when the desired reflection from any of the RISs departs significantly from geometrical optics, the metasurfaces can be optimized to provide robust communication links, without significant need for their optimal placement.

cs.IT↗

arXiv2025

Extremely Large Full Duplex MIMO for Simultaneous Downlink Communications and Monostatic Sensing at Sub-THz Frequencies

The in-band Full Duplex (FD) technology is lately gaining attention as an enabler for the emerging paradigm of Integrated Sensing and Communications (ISAC), which envisions seamless integration of sensing mechanisms for unconnected entities into next generation wireless networks. In this paper, we present an FD Multiple-Input Multiple-Output (MIMO) system with extremely large antenna arrays at its transceiver module, which is optimized, considering two emerging analog beamforming architectures, for simultaneous DownLink (DL) communications and monostatic-type sensing intended at the sub-THz frequencies, with the latter operation relying on received reflections of the transmitted information-bearing signals. A novel optimization framework for the joint design of the analog and digital transmit beamforming, analog receive combining, and the digital canceler for the self-interference signal is devised with the objective to maximize the achievable DL rate, while meeting a predefined threshold for the position error bound for the unknown three-dimensional parameters of a passive target. Capitalizing on the distinctive features of the beamforming architectures with fully-connected networks of phase shifters and partially-connected arrays of metamaterials, two ISAC designs are presented. Our simulation results showcase the superiority of both proposed designs over state-of-the-art schemes, highlighting the role of various system parameters in the trade-off between the communication and sensing functionalities.

cs.IT↗

arXiv2025

AI-Empowered Channel Generation for IoV Semantic Communications in Dynamic Conditions

The Internet of Vehicles (IoV) transforms the transportation ecosystem promising pervasive connectivity and data-driven approaches. Deep learning and generative Artificial Intelligence (AI) have the potential to significantly enhance the operation of applications within IoV by facilitating efficient decision-making and predictive capabilities, including intelligent navigation, vehicle safety monitoring, accident prevention, and intelligent traffic management. Nevertheless, efficiently transmitting and processing the massive volumes of data generated by the IoV in real-time remains a significant challenge, particularly in dynamic and unpredictable wireless channel conditions. To address these challenges, this paper proposes a semantic communication framework based on channel perception to improve the accuracy and efficiency of data transmission. The semantic communication model extracts and compresses the information to be transmitted. In addition, the wireless channel is estimated by using a generative diffusion model, which is employed to predict the dynamic channel states, thereby improving the quality of IoV service. In dynamic scenarios, however, the channel estimation performance may be degraded when substantially new scenarios take place, which will adversely affect user experience. To mitigate this limitation, we employ a large model to fine-tune the channel generation model to enhance its adaptability for varying scenarios. The performance and reliability of the proposed framework are evaluated on the two public datasets.

cs.NI↗

arXiv2025

Optimizing Indoor RIS-Aided Physical-Layer Security: A Codebook-Generation Methodology and Measurement-Based Analysis

Sixth-Generation (6G) wireless networks aim to support innovative Internet-of-Things (IoT) applications that demand faster and more secure data transmission. While higher Open Systems Interconnection (OSI) layers employ measures like encryption and secure protocols to address data security, Physical-Layer Security (PLS) focuses on preventing information leakage to EavesDroppers (EDs) and mitigating the effects of jammers and spoofing attacks. In this context, the emerging technology of Reconfigurable Intelligent Surfaces (RISs) can play an instrumental role, enhancing PLS by intelligently reflecting electromagnetic waves to benefit Legitimate Users (LUs) while obstructing EDs. This paper presents practical indoor measurements to evaluate the capability of an RIS to enhance PLS, focusing on a varactor-based RIS technology designed for the FR1 band at 3.55 GHz. A comparative analysis of state-of-the-art RIS-aided secrecy optimization algorithms together with a novel approach designed in this paper, which relies on a newly generated RIS phase configuration codebook, highlight the potential of RISs to improve both data rates for LUs as well as secrecy against EDs in real-world indoor multipath environments. The results also demonstrate the frequency selectivity of the RIS, proviging practical insights on the optimization of the technology.

eess.SP↗

arXiv2025

Receiving RISs: Enabling Channel Estimation and Autonomous Configuration

This chapter focuses on a hardware architecture for semi-passive Reconfigurable Intelligent Surfaces (RISs) and investigates its consideration for boosting the performance of Multiple-Input Multiple-Output (MIMO) communication systems. The architecture incorporates a single or multiple radio-frequency chains to receive pilot signals via tunable absorption phase profiles realized by the metasurface front end, as well as a controller encompassing a baseband processing unit to carry out channel estimation, and consequently, the optimization of the RIS reflection coefficients. A novel channel estimation protocol, according to which the RIS receives non-orthogonal training pilot sequences from two multi-antenna terminals via tunable absorption phase profiles, and then, estimates the respective channels via its signal processing unit, is presented. The channel estimates are particularly used by the RIS controller to design the capacity-achieving reflection phase configuration of the metasurface front end. The proposed channel estimation algorithm, which is based on the Alternating Direction Method of Multipliers (ADMM), profits from the RIS random spatial absorption sampling to capture the entire signal space, and exploits the beamspace sparsity and low-rank properties of extremely large MIMO channels, which is particularly relevant for communication systems at the FR3 band and above. Our extensive numerical investigations showcase the superiority of the proposed channel estimation technique over benchmark schemes for various system and RIS hardware configuration parameters, as well as the effectiveness of using channel estimates at the RIS side to dynamically optimize the possibly phase-quantized reflection coefficients of its unit elements.

eess.SP↗

arXiv2025

Metasurfaces-Integrated Doubly-Dispersive MIMO: Channel Modeling and Optimization

The doubly-dispersive (DD) channel structure has played a pivotal role in wireless communications, particularly in high-mobility scenarios and integrated sensing and communications (ISAC), due to its ability to capture the key fading effects experienced by a transmitted signal as it propagates through a dynamic medium. However, extending the DD framework to multiple-input multiple-output (MIMO) systems, especially in environments artificially enhanced by reconfigurable intelligent surfaces (RISs) and stacked intelligent metasurfaces (SIM), remains a challenging open problem. In this chapter, a novel metasurfaces-parametrized DD (MPDD) channel model that integrates an arbitrary number of RISs, while also incorporating SIM at both the transmitter and receiver is introduced. Next, the application of this model to some key waveforms optimized for DD environments -- namely orthogonal frequency division multiplexing (OFDM), orthogonal time frequency space (OTFS), and affine frequency division multiplexing (AFDM) -- is discussed. Finally, the programmability of the proposed model is highlighted through an illustrative application, demonstrating its potential for enhancing waveform performance in SIM-assisted wireless systems.

eess.SP↗

arXiv2025

Performance Analysis of Wireless Communication Systems Assisted by Fluid Reconfigurable Intelligent Surfaces

This letter investigates the performance of emerging wireless communication systems assisted by a fluid reconfigurable intelligent surface (FRIS). Unlike conventional reconfigurable intelligent surfaces (RISs), an FRIS consists of fluid-inspired metamaterials arranged in a densely packed matrix of sub-elements over a surface. It dynamically activates specific elements for signal reflection and modulation based on real-time channel conditions. Considering a downlink scenario where a base station communicates with a user terminal via a FRIS, we first characterize the statistical behavior of the equivalent end-to-end channel by deriving closed-form approximations for its cumulative distribution and probability density functions. Using these expressions, an analytical approximation for the outage probability and a tight upper bound on the ergodic capacity, including their asymptotic behaviors for high signal-to-noise ratio values, are derived. Our findings reveal key performance trends demonstrating that FRIS can substantially improve link reliability and spectral efficiency compared to conventional RISs, owing to its capability to dynamically select optimal elements from a dense preconfigured grid.

cs.IT↗

arXiv2025

Dynamical ON-OFF Control with Trajectory Prediction for Multi-RIS Wireless Networks

Reconfigurable intelligent surfaces (RISs) have demonstrated an unparalleled ability to reconfigure wireless environments by dynamically controlling the phase, amplitude, and polarization of impinging waves. However, as nearly passive reflective metasurfaces, RISs may not distinguish between desired and interference signals, which can lead to severe spectrum pollution and even affect performance negatively. In particular, in large-scale networks, the signal-to-interference-plus-noise ratio (SINR) at the receiving node can be degraded due to excessive interference reflected from the RIS. To overcome this fundamental limitation, we propose in this paper a trajectory prediction-based dynamical control algorithm (TPC) for anticipating RIS ON-OFF states sequence, integrating a long-short-term-memory (LSTM) scheme to predict user trajectories. In particular, through a codebook-based algorithm, the RIS controller adaptively coordinates the configuration of the RIS elements to maximize the received SINR. Our simulation results demonstrate the superiority of the proposed TPC method over various system settings.

cs.NI↗

arXiv2025

FIRES: Fluid Integrated Reflecting and Emitting Surfaces

This letter introduces the concept of fluid integrated reflecting and emitting surface (FIRES), which constitutes a new paradigm seamlessly integrating the flexibility of fluid-antenna systems (FASs) with the dual functionality of simultaneous transmitting and reflecting reconfigurable intelligent surfaces (STAR-RISs). The potential of the proposed metasurface structure is studied though an FIRES-enabled multicast system based on the energy splitting protocol. In this model, the FIRES is divided into non-overlapping subareas, each functioning as a 'fluid' element capable of concurrent reflection and transmission and changing its position of radiation within the subarea. In particular, we formulate an optimization problem for the design of the triple tunable features of the surface unit elements, which is solved via a tailored particle swarm optimization approach. Our results showcase that the proposed FIRES architecture significantly outperforms its conventional STAR-RIS counterpart.

cs.IT↗