arXiv subjects

George Perrakis

Publications and source records attributed to George Perrakis.

8 recordsLinked to original sources

arXiv2025

Bandgap Engineering for Efficient Perovskite Solar Cells Under Multiple Color Temperature Indoor Lighting

Perovskite indoor photovoltaics (PIPVs) are emerging as a transformative technology for low-light intensity energy harvesting, owing to their high power conversion efficiencies (PCEs), low-cost fabrication, solution-processability, and compositionally tunable band gaps. In this work, methylammonium-free perovskite absorbers were compositionally engineered to achieve band gaps of 1.55, 1.72, and 1.88 eV, enabling matching the spectral photoresponse with the indoor lighting. Devices based on a scalable mesoscopic n-i-p architecture were systematically evaluated under white LED illumination across correlated color temperatures (3000-5500 K) and light intensities from 250 to 1000 lux with active area of 1 cm2. The 1.72 eV composition exhibited the most promising performance across different light intensities and colors, achieving PCEs of 35.04 % at 1000 lux and 36.6 % at 250 lux, with a stable device operation of over 2000 hours. On the other hand, the 1.88 eV band-gap variant reached a peak PCE of 37.4 % under 250 lux (5500 K), however performance trade-offs were observed across the different color lights LEDs. Our combined experimental and theoretical optical-electrical simulations suggest that decreasing trap-assisted recombination in wide-bandgap compositions may further improve PIPV performance across the different illumination conditions. In contrast, devices with 1.55 eV band gap underperformed in such conditions due to suboptimal spectral overlap and utilization. These findings establish bandgap optimization and device architecture as key design principles for high-efficiency, stable PIPVs, advancing their integration into self-powered electronic systems and innovative indoor environments.

cond-mat.mtrl-sci↗

arXiv2023

Transparent Multispectral Photonic Electrode for All-Weather Stable and Efficient Perovskite Solar Cells

Perovskite solar cells (PSCs) are the most promising technology for advancing current photovoltaic performance. However, the main challenge for their practical deployment and commercialization is their operational stability, affected by solar illumination and heating, as well as the electric field that is generated in the PV device by light exposure. Here, we propose a transparent multispectral photonic electrode placed on top of the glass substrate of solar cells, which simultaneously reduces the device solar heating and enhances its efficiency. Specifically, the proposed photonic electrode, composed of a low-resistivity metal and a conductive layer, simultaneously serves as a highly-efficient infrared filter and an ultra-thin transparent front contact, decreasing devices' solar heating and operating temperature. At the same time, it simultaneously serves as an anti-reflection coating, enhancing the efficiency. We additionally enhance the device cooling by coating the front glass substrate side with a visibly transparent film (PDMS), which maximizes substrate's thermal radiation. To determine the potential of our photonic approach and fully explore the cooling potential of PSCs, we first provide experimental characterizations of the absorption properties (in both visible and infrared wavelengths) of state-of-the-art PSCs among the most promising ones regarding the efficiency, stability, and cost. We then numerically show that applying our approach to promising PSCs can result in lower operating temperatures by over 9.0 oC and an absolute efficiency increase higher than 1.3%. These results are insensitive to varying environmental conditions. Our approach is simple and only requires modification of the substrate; it therefore points to a feasible photonic approach for advancing current photovoltaic performance with next-generation solar cell materials.

physics.optics↗

arXiv2023

A critical perspective for emerging ultra-thin solar cells with ultra-high power-per-weight outputs

Ultrathin, solution-processed emerging solar cells with high power-per-weight (PPW) outputs demonstrate unique potential for applications where low weight, high power output, and flexibility are indispensable. The following perspective explores the literature of emerging PVs and highlights the maximum reported PPW values of Perovskite Solar Cells (PSCs) 29.4 W/g, Organic Solar Cells (OSCs) 32.07 W/g and Quantum Dot Solar Cells (QDSC) 15.02 W/g, respectively. The record PPW values of OSCs and PSCs are approximately one order of magnitude higher compared to their inorganic ultrathin solar cells counterparts (approx. 3.2 W/g for CIGS and a-Si). This consists emerging PVs, very attractive for a variety of applications where the PPW is the key parameter. In particular, both OSCs and PSCs can be implemented in different scenarios of applications (indoor and biocompatible applications for OSCs and outdoor and high-energy radiation conversion conditions for the PSCs) due to their unique optoelectronic and physiochemical properties. Finally, our theoretical optical and electrical simulation and optimization study for the most promising and well-suited PV technologies, showed an impressive maximum realistic theoretical PPW limit of 74.3 and 93.7 W/g for PSCs and OSCs, respectively. Our finding shows that the literature PSCs and OSCs towards high PPW outputs, is not quite close to the theoretical maximum and thus more work needs to be done to further increase the PPW output of these promising PV technologies.

cond-mat.mtrl-sci↗

arXiv2023

Impact of plasmonic modes on the formation of self-organised nano-patterns in thin films

Formation of nanoscale laser-induced periodic surface structures on thin metal films (of the size of the optical penetration depth) is a yet unexplored area that is expected to open new routes for laser patterning and a wealth of exciting applications in optics, photonics, and sensing. In contrast to the common belief that excitation of Surface Plasmon Polaritons (SPPs) on the air/metal interface plays the dominant role in the features of the induced topographies, in this work, we demonstrate that the excitation of coupled SPPs in both air/metal and metal/substrate interfaces, along with other parameters such as the thickness of the material, the photon energy, and the substrate refractive index, dictate the spatial modulation of the absorbed energy. A detailed theoretical analysis of the excited plasmonic waves and a multiscale modelling of laser-induced physical phenomena manifests that depending on the laser conditions and thickness of the irradiated solid, topographies with periodic features of diverse sizes (ranging from $\lambda_L/3$ to $\lambda_L$, where $\lambda_L$ stands for the laser wavelength) and different orientation can be realized. The capability to control and tune the characteristics of the produced structures on thin films is expected to enable novel surface patterning approaches.

physics.optics↗

arXiv2020

Biomimetic Omnidirectional Anti-reflective Glass via Direct Ultrafast Laser Nanostructuring

We report on a single-step, biomimetic approach for the realization of omnidirectional transparent antireflective glass. In particular, it is shown that circularly polarized ultrashort laser pulses produce self-organized nanopillar structures on fused silica (SiO2). The laser induced nanostructures are selectively textured on the glass surface in order to mimic the spatial randomness, pillar-like morphology, as well as the remarkable anti-reflection properties found on the wings of the glasswing butterfly, Greta oto[1] and various Cicada species[2]. The artificial structures exhibit impressive anti-reflective properties, both in the visible and infrared frequency range. Accordingly, the laser-processed glass surfaces show reflectivity smaller than 1% for various angles of incidence in the visible spectrum for S-P linearly polarized configurations. While, in the near infrared spectrum, the laser-textured glass shows higher transmittance compared to the pristine. It is envisaged that our current results will revolutionize the technology of anti-reflective transparent surfaces and impact numerous applications from glass displays to optoelectronic devices.

physics.optics↗

arXiv2020

Ultraviolet radiation impact on the efficiency of commercial crystalline silicon-based photovoltaics: A theoretical thermal-electrical study in realistic device architectures

We investigate and evaluate the contribution of the ultraviolet radiation spectrum on the temperature and efficiency of commercial crystalline silicon-based photovoltaics (PVs) that operate outdoors. The investigation is performed by employing a comprehensive thermal-electrical modeling approach which takes into account all the major processes affected by the temperature variation in the photovoltaic devices. We show that effectively reflecting the ultraviolet radiation (i.e. up to a certain wavelength) results in a reduction of the overall operation temperature and enhancement of the PV cell's efficiency. In addition, blocking the high energy ultraviolet photons prolongs the life time of the PV and its performance on the long term.

physics.app-ph↗

arXiv2019

Passive radiative cooling impact on commercial crystalline silicon-based photovoltaics

The radiative cooling of objects during daytime under direct sunlight has recently been shown to be significantly enhanced by utilizing nanophotonic coatings. Multilayer thin film stacks, 2D photonic crystals, etc. as coating structures improved the thermal emission rate of a device in the infrared atmospheric transparency window reducing considerably devices' temperature. Due to the increased heating in photovoltaic (PV) devices, that has significant adverse consequences on both their efficiency and life-time, and inspired by the recent advances in daytime radiative cooling, we developed a coupled thermal-electrical modeling to examine the physical mechanisms on how a radiative cooler affects the overall efficiency of commercial photovoltaic modules. Employing this modeling, which takes into account all the major processes affected by the temperature variation in a PV device, we evaluated the relative impact of the main radiative cooling approaches proposed so far on the PV efficiency, and we established required conditions for optimized radiative cooling. Moreover, we identified the validity regimes of the currently existing PV-cooling models which treat the PV coolers as simple thermal emitters. Finally, we assessed some realistic photonic coolers from the literature, compatible with photovoltaics, to implement the radiative cooling requirements, and demonstrated their associated impact on the temperature reduction and PV efficiency. Providing the physical mechanisms and requirements for cooling radiatively solar cells, our study provides guidelines for utilizing suitable photonic structures as radiative coolers, enhancing the efficiency and the lifetime of PV devices.

physics.app-ph↗

arXiv2019

Efficient and environmental-friendly perovskite solar cells via embedding plasmonic nanoparticles: an optical simulation study on realistic device architecture

Solution-processed, lead halide-based perovskite solar cells have overcome important challenges over the recent years, offering low-cost and high solar power conversion efficiencies. However, they still undergo unoptimized light collection due mainly to the thin (~350 nm) polycrystalline absorber layers. Moreover, their high toxicity (due to the presence of lead in the perovskite crystalline structure) makes it necessary that the thickness of the absorber layers to be further reduced, for their future commercialization, without reducing the device performance. Here we aim to address these issues via embedding spherical plasmonic nanoparticles of various sizes, composition, concentrations, and vertical positions, for the first time in realistic halide-based perovskite solar cells architecture, and to clarify their effect on the absorption properties and enhancement. We theoretically show that plasmon-enhanced near-field effects and scattering leads to a device photocurrent enhancement of up to ~7.3% when silver spheres are embedded inside the perovskite layer. Interestingly, the combination of silver spheres in perovskite and aluminum spheres inside the hole transporting layer (PEDOT:PSS) of the solar cell leads to an even further enhancement, of up to ~12%. This approach allows the employment of much thinner perovskite layers in PSCs (up to 150 nm) to reach the same photocurrent as the nanoparticles-free device and reducing thus significantly the toxicity of the device. Providing the requirements related to the size, shape, position, composition, and concentration of nanoparticles for the PSCs photocurrent enhancement, our study establishes guidelines for a future development of highly-efficient, environmentally friendly and low-cost plasmonic perovskite solar cells.

physics.app-ph↗