arXiv subjects

Georges Meynet

Publications and source records attributed to Georges Meynet.

At least 37 records · Page 2Linked to original sources

arXiv2024

Rapidly rotating Population III stellar models as a source of primary nitrogen

The first stars might have been fast rotators. This would have important consequences for their radiative, mechanical and chemical feedback. We discuss the impact of fast initial rotation on the evolution of massive Population III models and on their nitrogen and oxygen stellar yields. We explore the evolution of Population III stars with initial masses in the range of 9Msol < Mini < 120Msol starting with an initial rotation on the Zero Age Main Sequence equal to 70% of the critical one. We find that with the physics of rotation considered here, our rapidly-rotating Population III stellar models do not follow a homogeneous evolution. They lose very little mass in case mechanical winds are switched on when the surface rotation becomes equal or larger than the critical velocity. Impact on the ionising flux appears modest when compared to moderately-rotating models. Fast rotation favours, in models with initial masses above ~20Msol, the appearance of a very extended intermediate convective zone around the H-burning shell during the core He-burning phase. This shell has important consequences on the sizes of the He- and CO-cores and thus impacts the final fate of stars. Moreover, it has a strong impact on nucleosynthesis boosting the production of primary 14N. Fast initial rotation impacts significantly the chemical feedback of Population III stars. Observations of extremely metal-poor stars and/or starbursting regions are essential to provide constraints on the properties of the first stars.

astro-ph.SR↗

arXiv2024

A method for non-linear inversion of the stellar structure applied to gravity-mode pulsators

We present a method for a non-linear asteroseismic inversion suitable for gravity-mode pulsators and apply it to slowly pulsating B-type (SPB) stars. Our inversion method is based on the iterative improvement of a parameterised static stellar structure model, which in turn is based on constraints from the observed oscillation periods. We present tests to demonstrate that the method is successful in recovering the properties of artificial targets both inside and outside the parameter space. We also present a test of our method on the well-studied SPB star KIC 7760680. We believe that this method is promising for carrying out detailed analyses of observations of SPB and $γ$ Dor stars and will provide complementary information to evolutionary models.

astro-ph.SR↗

arXiv2024

Evolution of rotating massive stars adopting a newer, self-consistent wind prescription at SMC metallicity

We use Geneva-evolution-code to run evolutionary tracks for stellar masses ranging from $20$ to $85$ $M_\odot$ at SMC metallicity ($Z=0.002$). We upgrade the recipe for stellar winds by adopting our self-consistent m-CAK prescription, which reduces the value of mass-loss rate by a factor between 2 and 6 depending on the mass range. The impact of our new winds is wide, and it can be divided between direct and indirect impact. For the most massive models ($60$ and $85$ $M_\odot$) with $\dot M\gtrsim2\times10^{-7}$ $M_\odot$ yr$^{-1}$, the impact is direct because lower mass loss make stars remove less envelope and therefore remain more massive and less chemically enriched at their surface at the end of their MS phase. For the less massive models ($20$ and $25$ $M_\odot$) with $\dot M\lesssim2\times10^{-8}$ $M_\odot$ yr$^{-1}$, the impact is indirect because lower mass loss make the stars keep high rotational velocities for a longer period of time, then extending the H-core burning lifetime and reaching the end of the MS with higher surface enrichment. Given that the conditions at the H-depletion change, the stars will lose more mass during their He-core burning stages anyways. For $M_\text{zams}=20$ to $40$ $M_\odot$, our models predict stars will evolve through the Hertzsprung gap, from O-type supergiants to BSG and finally RSG, with larger mass fractions of helium compared to old evolution models. New models also set down to $M_\text{zams}=85\,M_\odot$ the minimal initial mass required for a single star to become WR at metallicity $Z=0.002$. New values for $\dot M$ need to be complemented with upgrades in additional features such as convective core overshooting and distribution of rotational velocities, besides more detailed observations from projects such as XShootU, in order to provide a robust framework for the study of massive stars at low metallicity environments.

astro-ph.SR↗

arXiv2024

Explaining the high nitrogen abundances observed in high-z galaxies via population III stars of a few thousand solar masses

The chemical enrichment of the early Universe is a crucial element in the formation and evolution of galaxies, and Population III (PopIII) stars must play a vital role in this process. In this study, we examine metal enrichment from massive stars in the early Universe's embryonic galaxies. Using radiation hydrodynamic simulations and stellar evolution modelling, we calculated the expected metal yield from these stars. Specifically, we applied accretion rates from a previous radiation-hydrodynamic simulation to inform our stellar evolution modelling, executed with the Geneva code, across 11 selected datasets, with final stellar masses between 500 and 9000 Msol. Our results demonstrate that the first generation of Pop III stars within a mass range of 2000 to 9000 Msol result in N/O, C/O and O/H ratios compatible with the values observed in very high-z galaxies GN-z11 and CEERS 1019. The ejecta of these Pop III stars are predominantly composed of He, H, and N. Our Pop III chemical enrichment model of the halo can accurately reproduce the observed N/O and C/O ratios, and, by incorporating a hundred times more zero-metallicity interstellar material with the stellar ejecta, it accurately attains the observed O/H ratio. Thus, a sub-population of extremely massive PopIII stars, with masses surpassing approximately 2000 Msol, effectively reproduces the CNO elemental abundances observed in high-z JWST galaxies to date.

astro-ph.GA↗

arXiv2024

Spectacular nucleosynthesis from early massive stars

Stars formed with initial mass over 50 Msun are very rare today, but they are thought to be more common in the early universe. The fates of those early, metal-poor, massive stars are highly uncertain. Most are expected to directly collapse to black holes, while some may explode as a result of rotationally powered engines or the pair-creation instability. We present the chemical abundances of J0931+0038, a nearby low-mass star identified in early followup of SDSS-V Milky Way Mapper, which preserves the signature of unusual nucleosynthesis from a massive star in the early universe. J0931+0038 has relatively high metallicity ([Fe/H] = -1.76 +/- 0.13) but an extreme odd-even abundance pattern, with some of the lowest known abundance ratios of [N/Fe], [Na/Fe], [K/Fe], [Sc/Fe], and [Ba/Fe]. The implication is that a majority of its metals originated in a single extremely metal-poor nucleosynthetic source. An extensive search through nucleosynthesis predictions finds a clear preference for progenitors with initial mass > 50 Msun, making J0931+0038 one of the first observational constraints on nucleosynthesis in this mass range. However the full abundance pattern is not matched by any models in the literature. J0931+0038 thus presents a challenge for the next generation of nucleosynthesis models and motivates study of high-mass progenitor stars impacted by convection, rotation, jets, and/or binary companions. Though rare, more examples of unusual early nucleosynthesis in metal-poor stars should be found in upcoming large spectroscopic surveys.

astro-ph.SR↗

arXiv2023

Impact of different approaches for computing rotating stellar models I. The solar metallicity case

The physics of stellar rotation plays a crucial role in the evolution of stars, their final fate and the properties of compact remnants. Diverse approaches have been adopted to incorporate the effects of rotation in stellar evolution models. This study seeks to explore the consequences of these various prescriptions for rotation on essential outputs of massive star models. We compute a grid of 15 and 60 M$_{\odot}$ stellar evolution models with the Geneva Stellar Evolution Code (GENEC), accounting for both hydrodynamical and magnetic instabilities induced by rotation. In both the 15 and 60 M$_{\odot}$ models, the choice of the vertical and horizontal diffusion coefficients for the non magnetic models strongly impacts the evolution of the chemical structure, but has a weak impact on the angular momentum transport and the rotational velocity of the core. In the 15 M$_{\odot}$ models, the choice of diffusion coefficient impacts the convective core size during the core H-burning phase, whether the model begins core He-burning as a blue or red supergiant and the core mass at the end of He-burning. In the 60 M$_{\odot}$ models, the evolution is dominated by mass loss and is less affected by the choice of diffusion coefficient. In the magnetic models, magnetic instability dominates the angular momentum transport and such models are found to be less mixed when compared to their rotating non-magnetic counterparts. Stellar models with the same initial mass, chemical composition, and rotation may exhibit diverse characteristics depending on the physics applied. By conducting thorough comparisons with observational features, we can ascertain which method(s) produce the most accurate results in different cases.

astro-ph.SR↗

arXiv2023

Dynamical tides in binaries: Inconsistencies in the implementation of Zahn's prescription

Binary evolution codes are essential tools to help in understanding the evolution of binary systems. They contain a great deal of physics, for example stellar evolution, stellar interactions, mass transfer, tides, orbital evolution. Since many of these processes are difficult to account for in detail, we often rely on prescriptions obtained in earlier studies. We highlight that the impact of the dynamical tides with radiative damping has been implemented inconsistently with respect to its original theoretical formulation in many studies. We derive a new analytical solution for the evolution toward synchronization in the case of circular orbits and propose turnkey equations for the case of eccentric orbits that can be used in population synthesis studies. We compare the strength of the tidal torque obtained with this new formula with respect to that obtained with the formula generally used in literature by studying how the evolution toward synchronization of main sequence stellar models is affected. We conclude that by using an incorrect formula for the tidal torque, as has been done in many binary codes, the strength of the dynamical tides with radiative damping is over- or underestimated depending on whether the star is close to or far from synchronization.

astro-ph.SR↗

arXiv2023

Asteroseismic modelling strategies in the PLATO era. II. Automation of seismic inversions and quality assessment procedure

*Context*. In the framework of the PLATO mission, to be launched in late 2026, seismic inversion techniques will play a key role in the mission precision requirements of the stellar mass, radius, and age. It is therefore relevant to discuss the challenges of the automation of seismic inversions, which were originally developed for individual modelling.\\ *Aims*. We tested the performance of our newly developed quality assessment procedure of seismic inversions, which was designed in the perspective of a pipeline implementation.\\ *Methods*. We applied our assessment procedure on a testing set composed of 26 reference models. We divided our testing set into two categories, calibrator targets whose inversion behaviour is well known from the literature and targets for which we assessed manually the quality of the inversion. We then compared the results of our assessment procedure with our expectations as a human modeller for three types of inversions, the mean density inversion, the acoustic radius inversion, and the central entropy inversion.\\ *Results*. We found that our quality assessment procedure performs as well as a human modeller. The mean density inversion and the acoustic radius inversion are suited for a large-scale application, but not the central entropy inversion, at least in its current form.\\ *Conclusions*. Our assessment procedure showed promising results for a pipeline implementation. It is based on by-products of the inversion and therefore requires few numerical resources to assess quickly the quality of an inversion result.

astro-ph.SR↗

arXiv2023

The impact of convective criteria on the properties of massive stars

We study the differences between models computed with Ledoux and Schwarzschild criteria on the internal structure, evolutionary track in the Hertzsprung-Russell diagram (HRD), lifetimes, evolution of the surface abundances and velocities, and masses of the He and CO cores. We investigate the consequences on the nature of the supernova (SN) progenitors and the type of SN events, as well as on the yields of light elements. We also study the impact on the outputs of population synthesis models. Models with initial masses between 7 and 120 M$_\odot$ at solar metallicity ($Z$=0.014) and with an initial rotation equal to 0 or 0.4 times the critical velocity at the zero-age main sequence were computed with either the Schwarzschild or the Ledoux criterion until the end of the C-burning phase. Models with initial masses between 15 and 32 M$_\odot$ computed with the Schwarzschild criterion show larger intermediate convective zones attached to the H-burning shell than models computed with the Ledoux criterion. Their CO cores and outer convective zones in the red supergiant (RSG) phase are also smaller. This impacts many outputs of stars during the core He-burning phase. Schwarzschild models have smaller CO cores and outer convective zones in the RSG phase, and their blue-to-red supergiant ratio is much higher than for Ledoux models. They also produce longer crossings of the Hertzsprung gap and favour blue loops. The upper luminosity of RSGs is little affected by the change in the convective criterion. The maximum luminosity of RSG progenitors for type II-P SN events is lowered from 5.2 to 4.95 when the Ledoux criterion is used instead of the Schwarzschild criterion in non-rotating models. The Schwarzschild criterion predicts longer-lasting, less nitrogen-enriched, and faster-rotating Cepheids. Rotational mixing decreases the differences between Schwarzschild and Ledoux models.

astro-ph.SR↗

arXiv2023

The evolutionary stage of Betelgeuse inferred from its pulsation periods

Betelgeuse is a well known bright red supergiant that shows semi-regular variations with four approximate periods of 2200, 420, 230, and 185 days. While the longest period was customarily regarded as LSP (long secondary period) of unknown origin, we identify the ~2200-d period as the radial fundamental mode, and the three shorter periods as the radial first, second, and third overtones. From a linear nonadiabatic pulsation analysis including the pulsation/convection coupling, we have found that these radial pulsation modes are all excited in the envelope of a model in a late stage of the core-carbon burning. Models with similar pulsation property have masses of 11~12 M_\odot (19M_\odot at ZAMS) with luminosities (log L/L_\odot =5.27~5.28) and effective temperatures (log T_{eff}\approx 3.53) that are consistent with the range of the observational determinations. We also find that a synthetic light curve obtained by adding the fundamental and the first-overtone mode is comparable with the light curve of Betelgeuse up to the Great Dimming. We conclude that Betelgeuse is likely in the late stage of core carbon burning, and a good candidate for the next Galactic Type II supernova.

astro-ph.SR↗

arXiv2023

Critical accretion rates for rapidly growing massive Population III stars

Efforts to understand the origin and growth of massive black holes observed in the early Universe have spurred a strong interest in the evolution and fate of rapidly-accreting primordial (metal-free) stars. Here, we investigate the evolution of such Population III stars under variable accretion rates, focusing on the thermal response and stellar structure, the impact of the luminosity wave encountered early in the pre-main sequence phase, and the influence of accretion on their subsequent evolution. We employ the Geneva stellar evolution code and simulate ten models with varying accretion histories, covering a final mass range from 491 M$_{\odot}$ to 6127 M$_{\odot}$. Our findings indicate that the critical accretion rate delineating the red and blue supergiant regimes during the pre-main sequence evolution is approximately $2.5\times10^{-2} $M$_{\odot}$/yr. Once core hydrogen burning commences, the value of this critical accretion rate drops to $7.0\times10^{-3}$M$_{\odot}$/yr. Moreover, we also confirm that the Kelvin-Helmholtz timescale in the outer surface layers is the more relevant timescale for determining the transition between red and blue phases. Regarding the luminosity wave, we find that it affects only the early pre-main sequence phase of evolution and does not directly influence the transition between red and blue phases, which primarily depends on the accretion rate. Finally, we demonstrate that variable accretion rates significantly impact the lifetimes, surface enrichment, final mass and time spent in the red phase. Our study provides a comprehensive understanding of the intricate evolutionary patterns of Population III stars subjected to variable accretion rates.

astro-ph.SR↗

arXiv2023

Asteroseismic modelling strategies in the PLATO era I. Mean density inversions and direct treatment of the seismic information

Asteroseismic modelling will be part of the pipeline of the PLATO mission and will play a key role in the mission precision requirements on stellar mass, radius and age. It is therefore crucial to compare how current modelling strategies perform, and discuss the limitations and remaining challenges for PLATO, such as the so-called surface effects, the choice of physical ingredients, and stellar activity. In this context, we carried out a systematic study of the impact of surface effects on the estimation of stellar parameters. In this work, we demonstrated how combining a mean density inversion with a fit of frequencies separation ratios can efficiently damp the surface effects and achieve precise and accurate stellar parameters for ten Kepler LEGACY targets, well within the PLATO mission requirements. We applied and compared two modelling approaches, directly fitting the individual frequencies, or coupling a mean density inversion with a fit of the ratios, to six synthetic targets with a patched 3D atmosphere from Sonoi et al. (2015) and ten actual targets from the LEGACY sample. The fit of the individual frequencies is unsurprisingly very sensitive to surface effects and the stellar parameters tend to be biased, which constitutes a fundamental limit to both accuracy and precision. In contrast, coupling a mean density inversion and a fit of the ratios efficiently damps the surface effects, and allows us to get both precise and accurate stellar parameters. The average statistical precision of our selection of LEGACY targets with this second strategy is 1.9% for the mass, 0.7% for the radius, and 4.1% for the age, well within the PLATO requirements. Using the mean density in the constraints significantly improves the precision of the mass, radius and age determinations, on average by 20%, 33%, and 16%, respectively.

astro-ph.SR↗

arXiv2023

Numerical experiments to help understand cause and effect in massive star evolution

The evolution of massive stars is affected by a variety of physical processes including convection, rotation, mass loss and binary interaction. Because these processes modify the internal chemical abundance profiles in multiple ways simultaneously, it can be challenging to determine which properties of the stellar interior are primarily driving the overall evolution. Building on previous work, we develop a new modelling approach called SNAPSHOT that allows us to isolate the key features of the internal abundance profile that drive the evolution of massive stars. Using our approach, we compute numerical stellar structure models in thermal equilibrium covering key phases of stellar evolution. For the main sequence, we demonstrate that models with the same mass and very similar surface properties can have different internal distributions of hydrogen and convective core masses. We discuss why massive stars expand after the main sequence and the fundamental reasons for why they become red, blue or yellow supergiants. For the post-main sequence, we demonstrate that small changes in the abundance profile can cause very large effects on the surface properties. We also discuss the effects that produce blue supergiants and the cause of blue loops. Our models show that massive stars with lower metallicity tend to be more compact due to the combined effect of lower CNO abundances in the burning regions and lower opacity in the envelope.

astro-ph.SR↗

arXiv2023

Evolution of rotating massive stars with new hydrodynamic wind models

Mass loss due to line-driven winds is central to our understanding of the evolution of massive stars. We extend the evolution models introduced in Paper I, where the mass loss recipe is based on the simultaneous calculation of the wind hydrodynamics and the line-acceleration, by incorporating the effects of stellar rotation. We introduce a grid of self-consistent line-force parameters for a set of standard evolutionary tracks. With that, we generate a new set of evolutionary tracks with rotation for $M_\text{ZAMS}=25,40,70,$ and $120\,M_\odot$, and metallicities $Z=0.014$ and $0.006$. The self-consistent approach gives lower mass loss rates than the standard values adopted in previous evolution models. This decrease impacts strongly on the tracks of the most massive models. Weaker winds allow the star to retain more mass, but also more angular momentum. As a consequence, weaker wind models rotate faster and show a less efficient mixing in their inner stellar structure. The new tracks predict an evolution of the rotational velocities through the MS in close agreement with the range of $\varv\sin i$ values found by recent surveys of Galactic O-type stars. As subsequent implications, the weaker winds from self-consistent models suggest a reduction of the contribution of the isotope $^{26}$Al to the ISM due to stellar winds of massive stars during the MS phase. Moreover, the higher luminosities found for the self-consistent evolutionary models suggest that some populations of massive stars might be less massive than previously thought, as in the case of Ofpe stars at the Galactic Centre. Therefore, this study opens a wide range of consequences for further research based on the evolution of massive stars.

astro-ph.SR↗

arXiv2023

Bringing Stellar Evolution & Feedback Together: Summary of proposals from the Lorentz Center Workshop, 2022

Stars strongly impact their environment, and shape structures on all scales throughout the universe, in a process known as ``feedback''. Due to the complexity of both stellar evolution and the physics of larger astrophysical structures, there remain many unanswered questions about how feedback operates, and what we can learn about stars by studying their imprint on the wider universe. In this white paper, we summarize discussions from the Lorentz Center meeting `Bringing Stellar Evolution and Feedback Together' in April 2022, and identify key areas where further dialogue can bring about radical changes in how we view the relationship between stars and the universe they live in.

astro-ph.SR↗

arXiv2022

Searching for candidates of coalescing binary black holes formed through chemically homogeneous evolution in GWTC-3

The LIGO, Virgo, and KAGRA (LVK) collaboration has announced 90 coalescing binary black holes (BBHs) with $p_{\rm astro} > 50\%$ to date, however, the origin of their formation channels is still an open scientific question. Given various properties of BBHs (BH component masses and individual spins) inferred using the default priors by the LVK, independent groups have been trying to explain the formation of the BBHs with different formation channels. Of all formation scenarios, the chemically homogeneous evolution (CHE) channel has stood out with distinguishing features, namely, nearly-equal component masses and preferentially high individual spins aligned with the orbital angular momentum. We perform Bayesian inference on the BBH events officially reported in GWTC-3 with astrophysically-predicted priors representing different formation channels of the isolated binary evolution (CEE: common-envelope evolution channel; CHE; SMT: stable mass transfer). Given assumed models, we report strong evidence for GW190517\_055101 being most likely to have formed through the CHE channel. Assuming the BBH events in the subsample are all formed through one of the isolated binary evolution channels, we obtain the lower limits on the local merger rate density of these channels at $11.45 ~\mathrm{Gpc^{-3}~yr^{-1}}$ (CEE), $0.18 ~\mathrm{Gpc^{-3}~yr^{-1}}$ (CHE), and $0.63 ~\mathrm{Gpc^{-3}~yr^{-1}}$ (SMT) at $90\%$ credible level.

astro-ph.HE↗

arXiv2022

The Time-Averaged Mass-Loss Rates of Red Supergiants As Revealed by their Luminosity Functions in M31 and M33

Mass-loss in red supergiants (RSGs) is generally recognized to be episodic, but mass-loss prescriptions fail to reflect this. Evolutionary models show that the total amount of mass lost during this phase determines if these stars evolve to warmer temperatures before undergoing core collapse. The current Geneva evolutionary models mimic episodic mass loss by enhancing the quiescent prescription rates whenever the star's outer layers exceed the Eddington luminosity by a large factor. This results in a 20 solar-mass model undergoing significantly more mass loss during the RSG phase than it would have otherwise, but has little effect on models of lower masses. We can test the validity of this approach observationally by measuring the proportion of high-luminosity RSGs to that predicted by the models. To do this, we use our recent luminosity-limited census of RSGs in M31 and M33, making modest improvements to membership, and adopting extinctions based on the recent panchromatic M31 and M33 Hubble surveys. We then compare the proportions of the highest luminosity RSGs found to that predicted by published Geneva models, as well as to a special set of models computed without the enhanced rates. We find good agreement with the models which include the supra-Eddington enhanced mass loss. The models with lower mass-loss rates predict a larger fraction of high-luminosity RSGs than observed, and thus can be ruled out. We also use these improved data to confirm that the upper luminosity limit of RSGs is log L/Lo~5.4, regardless of metallicity, using our improved data on M31 and M33 plus previous results on the Magellanic Clouds.

astro-ph.SR↗

arXiv2022

Impact of Population III homogeneous stellar evolution on early cosmic reionisation

Context: Population III (Pop III) stars may be fast rotating. An expected consequence of fast rotation is strong internal mixing that deeply affects their evolutionary tracks in the Hertzsprung-Russell diagram and hence their ionising power. aims: We investigate the impact on the ionising power of Pop III stars in an extreme case of internal mixing, the one leading to chemically homogeneous evolution (CHE). In that situation, during the main sequence phase, the star keeps the same chemical composition from its center to its surface. Homogeneous stars have larger effective temperatures and luminosities than stars evolving non-homogeneously and thus are stronger ionising sources. Methods: The stellar evolution models are based on $n=3$ polytropes with a time varying hydrogen mass fraction. The ionisation model employs the self-similar champagne flow solution from Shu et al. (2002), as well as numerical simulations for the stochastic treatment of star clusters over a grid of redshifts and halo masses. Results: We find that haloes containing chemically homogeneous stars have an escape fraction of ionising photons about twice that of haloes containing classical Pop III stars. By extrapolating the high-$z$ ionisation history powered by Pop III stars (at $z\gtrsim 15$) to the post-reionisation epoch, we derive the Thomson scattering optical depth $τ$, which is compared with the value measured by $\textit{Planck}$. We find that $τ$ is overproduced by $\sim1.5- 5σ$, when all Pop III stars evolve homogeneously. This indicates that CHE is unlikely to be realised in the majority of Pop III stars, although the present study cannot exclude that a fraction of them undergoes CHE. Conclusions: Fast rotation might have a significant impact on the ionising budget of Pop III stars, and thus on early cosmic reionisation.

astro-ph.SR↗