arXiv subjects

Gerard Zins

Publications and source records attributed to Gerard Zins.

6 recordsLinked to original sources

arXiv2026

On-sky Fibre-Target-Alignment of the 4MOST instrument: calibration and performance

The 4-metre Multi-Object Spectroscopic Telescope (4MOST) is a new wide-field, fibre-fed spectroscopic survey facility for the VISTA telescope at ESOs Paranal Observatory. The instrument enables the simultaneous acquisition of 2436 spectra across a 4.2 square deg field of view, using a tilting spine fibre positioner feeding three dedicated spectrographs. In this paper, we describe the calibration process, and performance verification of the Fibre-Target-Alignment (FTA) process for 4MOST. We show the complete FTA process, including calibration of the individual hardware- and software components. Namely the Metrology camera system, the Fibre Positioner AESOP, a spine based Secondary Guiding System, the sky to focal surface projection software, and residual minimization via raster scans. In total, the FTA system required one special tool, a large calibration target for the focal surface, and approximately 1 month of accumulated calibration work on the telescope. The FTA process reached approx. 24 um (0.4 arc sec) RMS distance between fibres and targets on sky about 3 weeks after installation of the final hardware components of 4MOST, which is when 4MOST had its first light event. By the time of writing this paper, i.e. 6 months later, we reach approx. 16 um (0.27 arc sec) RMS. Currently, we far exceed our requirements in terms of accuracy, and are doing trade-off studies to maximize scientific returns.

astro-ph.IM↗

arXiv2026

The SOXS Spectrograph Instrument Control Software

SOXS (Son Of X-Shooter) is a new spectrograph for the European Southern Observatory (ESO), recently installed at the New Technology Telescope (NTT) at the La Silla Observatory, Chile. The main instrument goal consists in the characterization of transient sources, based on alerts. It covers from (partially) ultra-violet to visible and near-infrared bands, with a spectral resolution of R $\sim 4500$, using two separate, wavelength-optimized spectrographs. A scientific grade visible camera, primarily intended for target acquisition, also provides a "light imaging" mode. In this paper, we present the design of the SOXS Instrument Control Software, which is in charge of controlling all motors, calibration lamps and detectors, monitoring sensors and components' status, coordinating the execution of exposures, and implementing all observation, calibration and maintenance procedures. Given the extensive experience of the SOXS consortium in the development of instruments for the ESO Very Large Telescope (VLT), we decided to base the design of the Control System on the same standards, both for hardware and software control. We illustrate the control network, the instrument functions and detectors to be controlled, the overall design of SOXS Instrument Software (INS) and its main components. Then, we provide details about the control software for the most SOXS-specific components, and peculiar features: the piezoelectric tip-tilt corrector used for active compensation of mechanical flexures of the instrument; the cryogenic piezoelectric slit exchanger for the NIR spectrograph; the co-rotator monitoring system; and the control of the Commercial-Off-the-Shelf (COTS)- based imaging camera.

astro-ph.IM↗

arXiv2023

The beta Pictoris system: Setting constraints on the planet and the disk structures at mid-IR wavelengths with NEAR

[abridged] We analyzed mid-infrared high-contrast coronagraphic images of the beta Pictoris system, taking advantage of the NEAR experiment using the VLT/VISIR instrument. The goal of our analysis is to investigate both the detection of the planet beta Pictoris b and of the disk features at mid-IR wavelengths. In addition, by combining several epochs of observation, we expect to constrain the position of the known clumps and improve our knowledge on the dynamics of the disk. To evaluate the planet b flux contribution, we extracted the photometry and compared it to the flux published in the literature. In addition, we used previous data from T-ReCS and VISIR, to study the evolution of the position of the southwest clump that was initially observed in the planetary disk back in 2003. While we did not detect the planet b, we were able to put constraints on the presence of circumplanetary material, ruling out the equivalent of a Saturn-like planetary ring around the planet. The disk presents several noticeable structures, including the known southwest clump. Using a 16-year baseline, sampled with five epochs of observations, we were able to examine the evolution of the clump: the clump orbits in a Keplerian motion with an sma of 56.1+-0.4 au. In addition to the known clump, the images clearly show the presence of a second clump on the northeast side of the disk and fainter and closer structures that are yet to be confirmed. We found correlations between the CO clumps detected with ALMA and the mid-IR images. If the circumplanetary material were located at the Roche radius, the maximum amount of dust determined from the flux upper limit around beta Pictoris b would correspond to the mass of an asteroid of 5 km in diameter. Finally, the Keplerian motion of the southwestern clump is possibly indicative of a yet-to-be-detected planet or signals the presence of a vortex.

astro-ph.EP↗

arXiv2021

Thermal imaging of dust hiding the black hole in the Active Galaxy NGC 1068

In the widely accepted 'Unified Model' solution of the classification puzzle of Active Galactic Nuclei, the orientation of a dusty accretion torus around the central black hole dominates their appearance. In 'type-1' systems, the bright nucleus is visible at the centre of a face-on torus. In 'type-2' systems the thick, nearly edge-on torus hides the central engine. Later studies suggested evolutionary effects and added dusty clumps and polar winds but left the basic picture intact. However, recent high-resolution images of the archetypal type-2 galaxy NGC 1068 suggested a more radical revision. They displayed a ring-like emission feature which the authors advocated to be hot dust surrounding the black hole at the radius where the radiation from the central engine evaporates the dust. That ring is too thin and too far tilted from edge-on to hide the central engine, and ad hoc foreground extinction is needed to explain the type-2 classification. These images quickly generated reinterpretations of the type 1-2 dichotomy. Here we present new multi-band mid-infrared images of NGC1068 that detail the dust temperature distribution and reaffirm the original model. Combined with radio data, our maps locate the central engine below the previously reported ring and obscured by a thick, nearly edge-on disk, as predicted by the Unified Model. We also identify emission from polar flows and absorbing dust that is mineralogically distinct from that towards the Milky Way centre.

astro-ph.GA↗

arXiv2018

SPHERE on-sky performance compared with budget predictions

The SPHERE (spectro-photometric exoplanet research) extreme-AO planet hunter saw first light at the VLT observatory on Mount Paranal in May 2014 after ten years of development. Great efforts were put into modelling its performance, particularly in terms of achievable contrast, and to budgeting instrumental features such as wave front errors and optical transmission to each of the instrument's three focal planes, the near infrared dual imaging camera IRDIS, the near infrared integral field spectrograph IFS and the visible polarimetric camera ZIMPOL. In this paper we aim at comparing predicted performance with measured performance. In addition to comparing on-sky contrast curves and calibrated transmission measurements, we also compare the PSD-based wave front error budget with in-situ wave front maps obtained thanks to a Zernike phase mask, ZELDA, implemented in the infrared coronagraph wheel. One of the most critical elements of the SPHERE system is its high-order deformable mirror, a prototype 40x40 actuator piezo stack design developed in parallel with the instrument itself. The development was a success, as witnessed by the instrument performance, in spite of some bad surprises discovered on the way. The devastating effects of operating without taking properly into account the loss of several actuators and the thermally and temporally induced variations in the DM shape will be analysed, and the actions taken to mitigate these defects through the introduction of specially designed Lyot stops and activation of one of the mirrors in the optical train will be described.

astro-ph.IM↗

arXiv2016

SPHERE IRDIS and IFS astrometric strategy and calibration

We present the current results of the astrometric characterization of the VLT planet finder SPHERE over 2 years of on-sky operations. We first describe the criteria for the selection of the astrometric fields used for calibrating the science data: binaries, multiple systems, and stellar clusters. The analysis includes measurements of the pixel scale and the position angle with respect to the North for both near-infrared subsystems, the camera IRDIS and the integral field spectrometer IFS, as well as the distortion for the IRDIS camera. The IRDIS distortion is shown to be dominated by an anamorphism of 0.60+/-0.02% between the horizontal and vertical directions of the detector, i.e. 6 mas at 1". The anamorphism is produced by the cylindrical mirrors in the common path structure hence common to all three SPHERE science subsystems (IRDIS, IFS, and ZIMPOL), except for the relative orientation of their field of view. The current estimates of the pixel scale and North angle for IRDIS are 12.255+/-0.009 milliarcseconds/pixel for H2 coronagraphic images and -1.75+/-0.08 deg. Analyses of the IFS data indicate a pixel scale of 7.46+/-0.02 milliarcseconds/pixel and a North angle of -102.18+/-0.13 deg. We finally discuss plans for providing astrometric calibration to the SPHERE users outside the instrument consortium.

astro-ph.IM↗