arXiv subjects

Gerasimos Konstantatos

Publications and source records attributed to Gerasimos Konstantatos.

25 records · Page 2Linked to original sources

arXiv2019

Colloidal Quantum Dot Tandem Solar Cells Using CVD Graphene as An Atomically Thin Intermediate Recombination Layer

Two-terminal tandem cell architectures are believed to be an effective way to further improve the power conversion efficiency in solution processed photovoltaics. To design an efficient tandem solar cell, two key issues need to be considered. Firstly, subcells with well-matched currents and complementary absorption characteristics are a prerequisite for high efficiency. Secondly identifying the appropriate intermediate layer (IML) to connect the subcells is necessary to minimize the optical and electronic losses. PbS colloidal quantum dots (CQDs) are a notable choice for the subcells due to their low cost, solution processibility and remarkable wide range band gap tunability. Single layer Graphene (Gr) has been proposed to be a promising IML due to its high transparency and conductivity. Here, as a proof of concept, we demonstrate a solution processed two terminal PbS CQDs tandem solar cell employing chemical vapor deposited Gr as the IML. In doing so, we report a PbS CQD cell comprising subcells with bandgaps of 1.4 and 0.95 eV that delivers power conversion efficiency in excess of 7%, substantially higher than previously reported CQD tandem cells.

physics.app-ph↗

arXiv2019

High-Efficiency Light-Emitting Diodes based on Formamidinium lead bromide nanocrystals and solution processed transport layers

Perovskite nanocrystal light-emitting diodes (LEDs) employing architecture comprising a ZnO nanoparticles electron-transport layer and a conjugated polymer hole-transport layer have been fabricated. The obtained LEDs demonstrate a maximum external-quantum-efficiency of 6.04%, luminance of 12998 Cd/m2 and stable electroluminescence at 519 nm. Importantly, such high efficiency and brightness have been achieved by employing solution processed transport layers, formamidinium lead bromide nanocrystals (CH(NH2)2PbBr3 NCs) synthesized at room-temperature and in air without the use of a Schlenk line, and a procedure based on atomic layer deposition to insolubilize the NC film. The obtained NCs show a photoluminescence quantum yield of 90% that is retained upon film fabrica-tion. The results show that perovskite NC LEDs can achieve high-performance without the use of transport layers deposited through evapo-ration in ultra-high-vacuum.

physics.app-ph↗

arXiv2019

High Open Circuit voltage solar cells based on bright mixed halide CsPbBrI2 perovskite nanocrystals synthesized under ambient air conditions

Lead halide perovskite nanocrystals (NCs) are currently emerging as one of the most interesting solution processed semiconductors since they possess high photoluminescence quantum yield (PLQY), and colour tunability through anion exchange reactions or quantum confinement. Here, we show efficient solar cells based on mixed halide (CsPbBrI2) NCs obtained via anion exchange reactions in ambient conditions. We performed anion exchange reactions in concentrated NC solutions with I-, thus inducing a PL red-shift up to 676 nm, and obtaining a high PLQY in film (65%). Solar cell devices operating in the wavelength range 350-660 nm were fabricated in air with two different deposition methods. The solar cells display a photo-conversion efficiency of 5.3% and open circuit voltage (Voc) up to 1.31V, among the highest reported for perovskite based solar cells with band gap below 2eV, clearly demonstrating the potential of this material.

physics.app-ph↗

arXiv2017

Image sensor array based on graphene-CMOS integration

Integrated circuits based on CMOS (complementary metal-oxide semiconductors) are at the heart of the technological revolution of the past 40 years, as these have enabled compact and low cost micro-electronic circuits and imaging systems. However, the diversification of this platform into applications other than microcircuits and visible light cameras has been impeded by the difficulty to combine other semiconductors than silicon with CMOS. Here, we show for the first time the monolithic integration of a CMOS integrated circuit with graphene, operating as a high mobility phototransistor. We demonstrate a high-resolution image sensor and operate it as a digital camera that is sensitive to UV, visible and infrared light. The demonstrated graphene-CMOS integration is pivotal for incorporating 2d materials into the next generation microelectronics, sensor arrays, low-power integrated photonics and CMOS imaging systems covering visible, infrared and even terahertz frequencies.. The demonstrated graphene-CMOS integration is pivotal for incorporating 2d materials into the next generation microelectronics, sensor arrays, low-power integrated photonics and CMOS imaging systems covering visible, infrared and even terahertz frequencies.

cond-mat.mes-hall↗

arXiv2016

Achieving ultrahigh carrier mobility and photo-responsivity in solution-processed perovskite/carbon nanotubes phototransistors

Organolead trihalide perovskites have drawn substantial interest for applications in photovoltaic and optoelectronic devices due to their low processing cost and remarkable physical properties. However, perovskite thin films still suffer from low carrier mobility, limiting their device performance and application potential. Here we report that embedding single-walled carbon nanotubes into halide perovskite films can significantly enhance the hole and electron mobilities to record-high values of 595.3 and 108.7 cm2 V-1 s-1, respectively. In the ambipolar phototransistors with such hybrid channels, photo-carriers generated in the light-absorbing perovskite matrix are transported by the carbon nanotubes, leading to ultrahigh detectivity of 6 * 1014 Jones and responsivity of 1 * 104 A W-1. We find that the perovskite precursor in dimethylformamide solution serve as an excellent stabilizer for the dispersion of carbon nanotubes, which potentially extend the scope of applications of perovskites in solution-processed functional composites. The unprecedented high performances underscore the perovskite/carbon nanotubes hybrids as an emerging class of functional materials in optoelectronic and other applications.

cond-mat.mtrl-sci↗

arXiv2014

Multiband Tunable Large Area Hot Carrier Plasmonic-Crystal Photodetectors

Optoelectronic functionalities of photodection and light harnessing rely on the band-to-band excitation of semiconductors, thus the spectral response of the devices is dictated and limited by their bandgap. A novel approach, free from this restriction, is to harvest the energetic electrons generated by the relaxation of a plasmonic resonance in the vicinity of a metal-semiconductor junction. In this configuration, the optoelectronic and spectral response of the detectors can be designed ad hoc just by tailoring the topology of metal structures, which has tremendous applications in solar energy harvesting and photodetection. Fully exploiting hot electron based optoelectronics yet requires a platform that combines their exotic spectral capabilities with large scale manufacturing and high performance. Herein we report the first implementation of a large area, low cost quasi 3D plasmonic crystal (PC) for hot electron photodetection, showcasing multiband selectivity in the VIS-NIR and unprecedented responsivity of 70 mA/W.

cond-mat.mes-hall↗

arXiv2011

Hybrid graphene-quantum dot phototransistors with ultrahigh gain

Graphene has emerged as a novel platform for opto-electronic applications and photodetector, but the inefficient conversion from light to current has so far been an important roadblock. The main challenge has been to increase the light absorption efficiency and to provide a gain mechanism where multiple charge carriers are created from one incident photon. Here, we take advantage of the strong light absorption in quantum dots and the two-dimensionality and high mobility of graphene to merge these materials into a hybrid system for photodetection with extremely high sensitivity. Exploiting charge transfer between the two materials, we realize for the first time, graphene-based phototransistors that show ultrahigh gain of 10^8 and ten orders of magnitude larger responsivity compared to pristine graphene photodetectors. These hybrid graphene-quantum dot phototransistors exhibit gate-tunable sensitivity, spectral selectivity from the shortwave infrared to the visible, and can be integrated with current circuit technologies.

cond-mat.mes-hall↗