arXiv subjects

Gergely Zachár

Publications and source records attributed to Gergely Zachár.

10 recordsLinked to original sources

arXiv2026

Emission reduction potential of freeway stop-and-go wave smoothing

The real-world potential of stop-and-go wave smoothing at scale remains largely unquantified. Smoothing freeway waves requires opening a gap large enough for them to dissipate, but that gap is often impractically large. We propose a counterfactual wave-smoothing benchmark that reconstructs a smooth, feasible trajectory from each empirical trajectory by solving a quadratic program with fixed boundary conditions and a maximum-gap constraint, and we use the MOVES model to estimate the resulting emission reduction potential. Applying the framework to nine weeks of weekday peak-period data from the I-24 MOTION testbed, which exhibits rich day-to-day variation in wave dynamics, we find meaningful potential for passenger cars under a 0.1-mile maximum-gap constraint: average CO2 reductions of 9.80% to 14.08% across lanes, with 12.94% to 25.70% in CO, 24.29% to 29.76% in HC, and 29.40% to 36.03% in NOx. Trucks emerge as particularly attractive targets, showing roughly twice the reduction potential of passenger cars.

eess.SY↗

arXiv2026

Enabling Real-Time Phase Control in Traffic Signal Hardware-in-the-Loop Simulation

Advanced Traffic Signal Control (TSC) algorithms require real-time phase control, yet existing Hardware-in-the-Loop Simulation (HILS) testbeds only support pre-programmed timing plans. In this paper, we present the first HILS testbed for real-time phase control. We develop a novel middleware architecture that translates dynamic phase actions (selection, switch, and duration) into commands for NTCIP-compliant commercial hardware controllers. This middleware manages phase transitions, synchronizes signal states, and handles errors without interrupting the hardware's internal operations. Experimental validation demonstrates that the system executes real-time phase commands, handles system conflicts, and achieves a low system internal latency at sub-millisecond on average.

eess.SY↗

arXiv2026

Calibrating Adaptive Smoothing Methods for Freeway Traffic Reconstruction

The adaptive smoothing method (ASM) is a widely used approach for traffic state reconstruction. This article presents a Python implementation of ASM, featuring end-to-end calibration using real-world ground truth data. The calibration is formulated as a parameterized kernel optimization problem. The model is calibrated using data from a full-state observation testbed, with input from a sparse radar sensor network. The implementation is developed in PyTorch, enabling integration with various deep learning methods. We evaluate the results in terms of speed distribution, spatio-temporal error distribution, and spatial error to provide benchmark metrics for the traffic reconstruction problem. We further demonstrate the usability of the calibrated method across multiple freeways. Finally, we discuss the challenges of reproducibility in general traffic model calibration and the limitations of ASM. This article is reproducible and can serve as a benchmark for various freeway operation tasks.

cs.LG↗

arXiv2025

Scalable analysis of stop-and-go waves: Representation, measurements and insights

Analyzing stop-and-go waves at the scale of miles and hours of data is an emerging challenge in traffic research. The past 5 years have seen an explosion in the availability of large-scale traffic data containing traffic waves and complex congestion patterns, making existing approaches unsuitable for repeatable and scalable analysis of traffic waves in these data. This paper makes a first step towards addressing this challenge by introducing an automatic and scalable stop-and-go wave identification method capable of capturing wave generation, propagation, dissipation, as well as bifurcation and merging, which have previously been observed only very rarely. Using a concise and simple critical-speed based definition of a stop-and-go wave, the proposed method identifies all wave boundaries that encompass spatio-temporal points where vehicle speed is below a chosen critical speed. The method is built upon a graph representation of the spatio-temporal points associated with stop-and-go waves, specifically wave front (start) points and wave tail (end) points, and approaches the solution as a graph component identification problem. It enables the measurement of wave properties at scale. The method is implemented in Python and demonstrated on a large-scale dataset, I-24 MOTION INCEPTION. Our results show insights on the complexity of traffic waves. Traffic waves can bifurcate and merge at a scale that has never been observed or described before. The clustering analysis of all the identified wave components reveals the different topological structures of traffic waves. We explored that the wave merge or bifurcation points can be explained by spatial features. The gallery of all the identified wave topologies is demonstrated at https://trafficwaves.github.io/.

physics.soc-ph↗

arXiv2025

Stop-and-go wave super-resolution reconstruction via iterative refinement

Stop-and-go waves are a fundamental phenomenon in freeway traffic flow, contributing to inefficiencies, crashes, and emissions. Recent advancements in high-fidelity sensor technologies have improved the ability to capture detailed traffic dynamics, yet such systems remain scarce and costly. In contrast, conventional traffic sensors are widely deployed but suffer from relatively coarse-grain data resolution, potentially impeding accurate analysis of stop-and-go waves. This article explores whether generative AI models can enhance the resolution of conventional traffic sensor to approximate the quality of high-fidelity observations. We present a novel approach using a conditional diffusion denoising model, designed to reconstruct fine-grained traffic speed field from radar-based conventional sensors via iterative refinement. We introduce a new dataset, I24-WaveX, comprising 132 hours of data from both low and high-fidelity sensor systems, totaling over 2 million vehicle miles traveled. Our approach leverages this dataset to formulate the traffic measurement enhancement problem as a spatio-temporal super-resolution task. We demonstrate that our model can effectively reproduce the patterns of stop-and-go waves, achieving high accuracy in capturing these critical traffic dynamics. Our results show promising advancements in traffic data enhancement, offering a cost-effective way to leverage existing low spatio-temporal resolution sensor networks for improved traffic analysis and management. We also open-sourced our trained model and code to facilitate further research and applications.

eess.SY↗

arXiv2025

Real-World Deployment and Assessment of a Multi-Agent Reinforcement Learning-Based Variable Speed Limit Control System

This article presents the first field deployment of a multi-agent reinforcement learning (MARL) based variable speed limit (VSL) control system on Interstate 24 (I-24) near Nashville, Tennessee. We design and demonstrate a full pipeline from training MARL agents in a traffic simulator to a field deployment on a 17-mile segment of I-24 encompassing 67 VSL controllers. The system was launched on March 8th, 2024, and has made approximately 35 million decisions on 28 million trips in six months of operation. We apply an invalid action masking mechanism and several safety guards to ensure real-world constraints. The MARL-based implementation operates up to 98% of the time, with the safety guards overriding the MARL decisions for the remaining time. We evaluate the performance of the MARL-based algorithm in comparison to a previously deployed non-RL VSL benchmark algorithm on I-24. Results show that the MARL-based VSL control system achieves a superior performance. The accuracy of correctly warning drivers about slowing traffic ahead is improved by 14% and the response delay to non-recurrent congestion is reduced by 75%. The preliminary data shows that the VSL control system has reduced the crash rate by 26% and the secondary crash rate by 50%. We open-sourced the deployed MARL-based VSL algorithm at https://github.com/Lab-Work/marl-vsl-controller.

eess.SY↗

arXiv2024

Traffic Control via Connected and Automated Vehicles: An Open-Road Field Experiment with 100 CAVs

The CIRCLES project aims to reduce instabilities in traffic flow, which are naturally occurring phenomena due to human driving behavior. These "phantom jams" or "stop-and-go waves,"are a significant source of wasted energy. Toward this goal, the CIRCLES project designed a control system referred to as the MegaController by the CIRCLES team, that could be deployed in real traffic. Our field experiment leveraged a heterogeneous fleet of 100 longitudinally-controlled vehicles as Lagrangian traffic actuators, each of which ran a controller with the architecture described in this paper. The MegaController is a hierarchical control architecture, which consists of two main layers. The upper layer is called Speed Planner, and is a centralized optimal control algorithm. It assigns speed targets to the vehicles, conveyed through the LTE cellular network. The lower layer is a control layer, running on each vehicle. It performs local actuation by overriding the stock adaptive cruise controller, using the stock on-board sensors. The Speed Planner ingests live data feeds provided by third parties, as well as data from our own control vehicles, and uses both to perform the speed assignment. The architecture of the speed planner allows for modular use of standard control techniques, such as optimal control, model predictive control, kernel methods and others, including Deep RL, model predictive control and explicit controllers. Depending on the vehicle architecture, all onboard sensing data can be accessed by the local controllers, or only some. Control inputs vary across different automakers, with inputs ranging from torque or acceleration requests for some cars, and electronic selection of ACC set points in others. The proposed architecture allows for the combination of all possible settings proposed above. Most configurations were tested throughout the ramp up to the MegaVandertest.

eess.SY↗

arXiv2023

Virtual trajectories for I-24 MOTION: data and tools

This article introduces a new virtual trajectory dataset derived from the I-24 MOTION INCEPTION v1.0.0 dataset to address challenges in analyzing large but noisy trajectory datasets. Building on the concept of virtual trajectories, we provide a Python implementation to generate virtual trajectories from large raw datasets that are typically challenging to process due to their size. We demonstrate the practical utility of these trajectories in assessing speed variability and travel times across different lanes within the INCEPTION dataset. The virtual trajectory dataset opens future research on traffic waves and their impact on energy.

eess.IV↗

arXiv2023

Automatic vehicle trajectory data reconstruction at scale

In this paper we propose an automatic trajectory data reconciliation to correct common errors in vision-based vehicle trajectory data. Given "raw" vehicle detection and tracking information from automatic video processing algorithms, we propose a pipeline including (a) an online data association algorithm to match fragments that describe the same object (vehicle), which is formulated as a min-cost network circulation problem of a graph, and (b) a one-step trajectory rectification procedure formulated as a quadratic program to enhance raw detection data. The pipeline leverages vehicle dynamics and physical constraints to associate tracked objects when they become fragmented, remove measurement noises and outliers and impute missing data due to fragmentations. We assess the capability of the proposed two-step pipeline to reconstruct three benchmarking datasets: (1) a microsimulation dataset that is artificially downgraded to replicate upstream errors, (2) a 15-min NGSIM data that is manually perturbed, and (3) tracking data consists of 3 scenes from collections of video data recorded from 16-17 cameras on a section of the I-24 MOTION system, and compare with the corresponding manually-labeled ground truth vehicle bounding boxes. All of the experiments show that the reconciled trajectories improve the accuracy on all the tested input data for a wide range of measures. Lastly, we show the design of a software architecture that is currently deployed on the full-scale I-24 MOTION system consisting of 276 cameras that covers 4.2 miles of I-24. We demonstrate the scalability of the proposed reconciliation pipeline to process high-volume data on a daily basis.

cs.DS↗

arXiv2023

So you think you can track?

This work introduces a multi-camera tracking dataset consisting of 234 hours of video data recorded concurrently from 234 overlapping HD cameras covering a 4.2 mile stretch of 8-10 lane interstate highway near Nashville, TN. The video is recorded during a period of high traffic density with 500+ objects typically visible within the scene and typical object longevities of 3-15 minutes. GPS trajectories from 270 vehicle passes through the scene are manually corrected in the video data to provide a set of ground-truth trajectories for recall-oriented tracking metrics, and object detections are provided for each camera in the scene (159 million total before cross-camera fusion). Initial benchmarking of tracking-by-detection algorithms is performed against the GPS trajectories, and a best HOTA of only 9.5% is obtained (best recall 75.9% at IOU 0.1, 47.9 average IDs per ground truth object), indicating the benchmarked trackers do not perform sufficiently well at the long temporal and spatial durations required for traffic scene understanding.

cs.CV↗