Searcharxiv⌕ Search

arXiv subjects

Gerhard Jakob

Publications and source records attributed to Gerhard Jakob.

At least 37 records · Page 2Linked to original sources

Inductive detection of inverse spin-orbit torques in magnetic heterostructures

The manipulation of magnetization via Magnetic torques is one of the most important phenomena in spintronics. In thin films, conventionally, a charge current flowing in a heavy metal is used to generate transverse spin currents and to exert torques on the magnetization of an adjacent ferromagnetic thin film layer. Here, in contrast to the typically employed heavy metals, we study spin-to-charge conversion in ferromagnetic heterostructures with large spin-orbit interaction that function as the torque-generating layers. In particular, we chose perpendicular magnetic anisotropy (PMA) multilayers [Co/Ni] and [Co/Pt] as the torque-generating layers and drive magnetization dynamics in metallic ferromagnetic thin film $\mathrm{Co_{20}Fe_{60}B_{20}}$ (CoFeB) layers with in-plane magnetic anisotropy (IMA). We investigate the spin dynamics driven by spin-orbit torque (SOT) and the concomitant charge current generation by the inverse SOT process using an inductive technique based on a vector network analyzer. In our experimental findings, we find that the SOTs generated by our multilayers are of a magnitude comparable to those produced by Pt, consistent with first-principles calculations. Furthermore, we noted a significant correlation between the SOT and the thickness of the CoFeB layer.

cond-mat.mtrl-sci↗

Stabilizing perpendicular magnetic anisotropy with strong exchange bias in PtMn/Co by magneto-ionics

Electric field control of magnetic properties offers a broad and promising toolbox for enabling ultra-low power electronics. A key challenge with high technological relevance is to master the interplay between the magnetic anisotropy of a ferromagnet and the exchange coupling to an adjacent antiferromagnet. Here, we demonstrate that magneto-ionic gating can be used to achieve a very stable out-of-plane (OOP) oriented magnetization with strong exchange bias in samples with as-deposited preferred in-plane (IP) magnetization. We show that the perpendicular interfacial anisotropy can be increased by more than a factor 2 in the stack Ta/Pt/PtMn/Co/HfO2 by applying -2.5 V gate voltage over 3 nm HfO2, causing a reorientation of the magnetization from IP to OOP with a strong OOP exchange bias of more than 50 mT. Comparing two thicknesses of PtMn, we identify a notable trade-off: while thicker PtMn yields a significantly larger exchange bias, it also results in a slower response to ionic liquid gating within the accessible gate voltage window. These results pave the way for post-deposition electrical tailoring of magnetic anisotropy and exchange bias in samples requiring significant exchange bias.

cond-mat.mtrl-sci↗

(Sub-)picosecond surface correlations of femtosecond laser excited Al-coated multilayers observed by grazing-incidence x-ray scattering

Femtosecond high-intensity laser pulses at intensities surpassing $10^{14} \,\text{W}/\text{cm}^2$ can generate a diverse range of functional surface nanostructures. Achieving precise control over the production of these functional structures necessitates a thorough understanding of the surface morphology dynamics with nanometer-scale spatial resolution and picosecond-scale temporal resolution. In this study, we show that individual XFEL pulses can elucidate structural changes on surfaces induced by laser-generated plasmas, employing grazing-incidence small-angle x-ray scattering (GISAXS). Using aluminum-coated multilayer samples we can differentiate between ultrafast surface morphology dynamics and subsequent subsurface density dynamics, achieving nanometer-depth sensitivity and subpicosecond temporal resolution. The observed subsurface density dynamics serve to validate advanced simulation models depicting matter under extreme conditions. Our findings promise to unveil novel avenues for laser material nanoprocessing and high-energy-density science.

physics.plasm-ph↗

Harnessing Orbital Hall Effect in Spin-Orbit Torque MRAM

Spin-Orbit Torque (SOT) Magnetic Random-Access Memory (MRAM) devices offer improved power efficiency, nonvolatility, and performance compared to static RAM, making them ideal, for instance, for cache memory applications. Efficient magnetization switching, long data retention, and high-density integration in SOT MRAM require ferromagnets (FM) with perpendicular magnetic anisotropy (PMA) combined with large torques enhanced by Orbital Hall Effect (OHE). We have engineered PMA [Co/Ni]$_3$ FM on selected OHE layers (Ru, Nb, Cr) and investigated the potential of theoretically predicted larger orbital Hall conductivity (OHC) to quantify the torque and switching current in OHE/[Co/Ni]$_3$ stacks. Our results demonstrate a $\sim$30\% enhancement in damping-like torque efficiency with a positive sign for the Ru OHE layer compared to a pure Pt, accompanied by a $\sim$20\% reduction in switching current for Ru compared to pure Pt across more than 250 devices, leading to more than a 60\% reduction in switching power. These findings validate the application of Ru in devices relevant to industrial contexts, supporting theoretical predictions regarding its superior OHC. This investigation highlights the potential of enhanced orbital torques to improve the performance of orbital-assisted SOT-MRAM, paving the way for next-generation memory technology.

physics.app-ph↗

Skyrmionic device for three dimensional magnetic field sensing enabled by spin-orbit torques

Magnetic skyrmions are topologically protected local magnetic solitons that are promising for storage, logic or general computing applications. In this work, we demonstrate that we can use a skyrmion device based on [W/CoFeB/MgO] 1 0 multilayers for three-dimensional magnetic field sensing enabled by spin-orbit torques (SOT). We stabilize isolated chiral skyrmions and stripe domains in the multilayers, as shown by magnetic force microscopy images and micromagnetic simulations. We perform magnetic transport measurements to show that we can sense both in-plane and out-of-plane magnetic fields by means of a differential measurement scheme in which the symmetry of the SOT leads to cancelation of the DC offset. With the magnetic parameters obtained by vibrating sample magnetometry and ferromagnetic resonance measurements, we perform finite-temperature micromagnetic simulations, where we investigate the fundamental origin of the sensing signal. We identify the topological transformation between skyrmions, stripes and type-II bubbles that leads to a change in the resistance that is read-out by the anomalous Hall effect. Our study presents a novel application for skyrmions, where a differential measurement sensing concept is applied to quantify external magnetic fields paving the way towards more energy efficient applications in skyrmionics based spintronics.

cond-mat.mes-hall↗

Enhanced thermally-activated skyrmion diffusion with tunable effective gyrotropic force

Magnetic skyrmions, topologically-stabilized spin textures that emerge in magnetic systems, have garnered considerable interest due to a variety of electromagnetic responses that are governed by the topology. The topology that creates a microscopic gyrotropic force also causes detrimental effects, such as the skyrmion Hall effect, which is a well-studied phenomenon highlighting the influence of topology on the deterministic dynamics and drift motion. Furthermore, the gyrotropic force is anticipated to have a substantial impact on stochastic diffusive motion; however, the predicted repercussions have yet to be demonstrated, even qualitatively. Here we demonstrate enhanced thermally-activated diffusive motion of skyrmions in a specifically designed synthetic antiferromagnet. Suppressing the effective gyrotropic force by tuning the angular momentum compensation leads to a more than 10 times enhanced diffusion coefficient compared to that of ferromagnetic skyrmions. Consequently, our findings not only demonstrate the gyro-force dependence of the diffusion coefficient but also enable ultimately energy-efficient unconventional stochastic computing.

cond-mat.mtrl-sci↗

Electrical coupling of superparamagnetic tunnel junctions mediated by spin-transfer-torques

In this work, the effect of electrical coupling on stochastic switching of two in-plane superparamagnetic tunnel junctions (SMTJs) is studied, using experimental measurements as well as simulations. The coupling mechanism relies on the spin-transfer-torque (STT) effect, which enables the manipulation of the state probability of an SMTJ. Through the investigation of time-lagged cross-correlation, the strength and direction of the coupling are determined. In particular, the characteristic state probability transfer curve of each SMTJ leads to the emergence of a similarity or dissimilarity effect. The cross-correlation as a function of applied source voltage reveals that the strongest coupling occurs for high positive voltages for our SMTJs. In addition, we show state tuneability as well as coupling control by the applied voltage. The experimental findings of the cross-correlation are in agreement with our simulation results.

cond-mat.mes-hall↗

Magneto-ionic modulation of the interlayer exchange interaction in synthetic antiferromagnets

The electric-field control of magnetism is a highly promising and potentially effective approach for achieving energy-efficient applications. In recent times, there has been significant interest in the magneto-ionic effect in synthetic antiferromagnets, primarily due to its strong potential in the realization of high-density storage devices with ultra-low power consumption. However, the underlying mechanism responsible for the magneto-ionic effect on the interlayer exchange coupling (IEC) remains elusive. In this study, we have successfully identified that the magneto-ionic control of the properties of the top ferromagnetic layer of the synthetic antiferromagnet (SyAFM), which is in contact with the high ion mobility oxide, plays a pivotal role in driving the observed gate-induced changes to the IEC. Our findings provide crucial insights into the intricate interplay between stack structure and magnetoionic-field effect on magnetic properties in synthetic antiferromagnetic thin film systems.

cond-mat.mes-hall↗

Fiber-tip spintronic terahertz emitters

Spintronic terahertz emitters promise terahertz sources with an unmatched broad frequency bandwidth that are easy to fabricate and operate, and therefore easy to scale at low cost. However, current experiments and proofs of concept rely on free-space ultrafast pump lasers and rather complex benchtop setups. This contrasts with the requirements of widespread industrial applications, where robust, compact, and safe designs are needed. To meet these requirements, we present a novel fiber-tip spintronic terahertz emitter solution that allows spintronic terahertz systems to be fully fiber-coupled. Using single-mode fiber waveguiding, the newly developed solution naturally leads to a simple and straightforward terahertz near-field imaging system with a 90%-10% knife-edge-response spatial resolution of 30 $μm$.

physics.optics↗

Temperature dependent study of the spin dynamics of coupled Y$_3$Fe$_5$O$_{12}$/Gd$_3$Fe$_5$O$_{12}$/Pt trilayers

In this study, we investigate the dynamic response of a Y$_3$Fe$_5$O$_{12}$ (YIG)/ Gd$_3$Fe$_5$O$_{12}$ (GdIG)/ Pt trilayer system by measurements of the ferromagnetic resonance (FMR) and the pumped spin current detected by the inverse spin Hall effect. This trilayer system offers the unique opportunity to investigate the spin dynamics of the ferrimagnetic GdIG, close to its compensation temperature. We show that our trilayer acts as a highly tunable spin current source. Our experimental results are supported by micro-magnetic simulations. As the detected spin current in the top Pt layer is distinctly dominated by the GdIG layer, this gives the unique opportunity to investigate the excitation and dynamic properties of GdIG while comparing it to the broadband FMR absorption spectrum of the heterostructure.

cond-mat.mtrl-sci↗

Single device offset-free magnetic field sensing principle with tunable sensitivity and linear range based on spin-orbit-torques

We propose a novel device concept using spin-orbit-torques to realize a magnetic field sensor, where we eliminate the sensor offset using a differential measurement concept. We derive a simple analytical formulation for the sensor signal and demonstrate its validity with numerical investigations using macrospin simulations. The sensitivity and the measurable linear sensing range in the proposed concept can be tuned by either varying the effective magnetic anisotropy or by varying the magnitude of the injected currents. We show that undesired perturbation fields normal to the sensitive direction preserve the zero-offset property and only slightly modulate the sensitivity of the proposed sensor. Higher-harmonics voltage analysis on a Hall cross experimentally confirms the linearity and tunability via current strength. Additionally, the sensor exhibits a non-vanishing offset in the experiment which we attribute to the anomalous Nernst effect.

cond-mat.mes-hall↗

Optimization of Permalloy properties for magnetic field sensors using He$^+$ irradiation

Permalloy, despite being a widely utilized soft magnetic material, still calls for optimization in terms of magnetic softness and magnetostriction for its use in magnetoresistive sensor applications. Conventional annealing methods are often insufficient to locally achieve the desired properties for a narrow parameter range. In this study, we report a significant improvement of the magnetic softness and magnetostriction in a 30 nm Permalloy film after He$^+$ irradiation. Compared to the as-deposited state, the irradiation treatment reduces the induced anisotropy by a factor ten and the hard axis coercivity by a factor five. In addition, the effective magnetostriction of the film is significantly reduced by a factor ten - below $1\times10^{-7}$ - after irradiation. All the above mentioned effects can be attributed to the isotropic crystallite growth of the Ni-Fe alloy and to the intermixing at the magnetic layer interfaces under light ion irradiation. We support our findings with X-ray diffraction analysis of the textured Ni$_{81}$Fe$_{19}$ alloy. Importantly, the sizable magnetoresistance is preserved after the irradiation. Our results show that compared to traditional annealing methods, the use of He$^+$ irradiation leads to significant improvements in the magnetic softness and reduces strain cross sensitivity in Permalloy films required for 3D positioning and compass applications. These improvements, in combination with the local nature of the irradiation process make our finding valuable for the optimization of monolithic integrated sensors, where classic annealing methods cannot be applied due to complex interplay within the components in the device.

cond-mat.mtrl-sci↗

Detection of long-range orbital-Hall torques

We report and quantify a large orbital-Hall torque generated by Nb and Ru, which we identify from a strong dependence of torques on the ferromagnets. This is manifested as a sign reversal and strong enhancement in the damping-like torques measured in Nb (or Ru)/Ni bilayers as compared to Nb (or Ru)/FeCoB bilayers. The long-range nature of orbital transport in the ferromagnet is revealed by the thickness dependences of Ni in Nb (or Ru)/Ni bilayers which are markedly different from the regular spin absorption in the ferromagnet that takes place within a few angstroms and thus it uniquely distinguishes the orbital Hall torque from the spin Hall torque.

cond-mat.mes-hall↗

Nanosecond True Random Number Generation with Superparamagnetic Tunnel Junctions -- Identification of Joule Heating and Spin-Transfer-Torque effects

This work investigates nanosecond superparamagnetic switching in 50 nm diameter in-plane magnetized magnetic tunnel junctions (MTJs). Due to the small in-plane uniaxial anisotropy, dwell times below 10 ns and auto-correlation times down to 5 ns are measured for circular superparamagnetic tunnel junctions (SMTJs). SMTJs exhibit probabilistic switching of the magnetic free layer, which can be used for the generation of true random numbers. The quality of random bitstreams, generated by our SMTJ, is evaluated with a statistical test suite (NIST STS, sp 800-22) and shows true randomness after three XOR operations of four random SMTJ bitstreams. A low footprint CMOS circuit is proposed for fast and energy-efficient random number generation. We demonstrate that the probability of a 1 or 0 can be tuned by spin-transfer-torque (STT), while the average bit generation rate is mainly affected by the current density via Joule heating. Although both effects are always present in MTJs, Joule heating most often is neglected. However, with a resistance area (RA) product of 15 $Ωμ$m$^2$ and current densities of the order of 1 MA/cm$^2$, an increasing temperature at the tunneling site results in a significant increase in the switching rate. As Joule heating and STT scale differently with current density, device design can be optimized based on our findings.

cond-mat.mes-hall↗

Control of magnetoelastic coupling in Ni/Fe multilayers using He$^+$ ion irradiation

This study reports the effects of post-growth He$^+$ irradiation on the magneto-elastic properties of a $Ni$ /$Fe$ multi-layered stack. The progressive intermixing caused by He$^+$ irradiation at the interfaces of the multilayer allows us to tune the saturation magnetostriction value with increasing He$^+$ fluences, and even to induce a reversal of the sign of the magnetostrictive effect. Additionally, the critical fluence at which the absolute value of the magnetostriction is dramatically reduced is identified. Therefore insensitivity to strain of the magnetic stack is nearly reached, as required for many applications. All the above mentioned effects are attributed to the combination of the negative saturation magnetostriction of sputtered Ni, Fe layers and the positive magnetostriction of the Ni$_{x}$Fe$_{1-x}$ alloy at the intermixed interfaces, whose contribution is gradually increased with irradiation. Importantly the irradiation does not alter the layers polycrystalline structure, confirming that post-growth He$^+$ ion irradiation is an excellent tool to tune the magneto-elastic properties of magnetic samples. A new class of spintronic devices can be envisioned with a material treatment able to arbitrarily change the magnetostriction with ion-induced "magnetic patterning".

cond-mat.mtrl-sci↗

Tuning spin-orbit torques across the phase transition in VO$_2$/NiFe heterostructure

The emergence of spin-orbit torques as a promising approach to energy-efficient magnetic switching has generated large interest in material systems with easily and fully tunable spin-orbit torques. Here, current-induced spin-orbit torques in VO$_2$/NiFe heterostructures were investigated using spin-torque ferromagnetic resonance, where the VO$_2$ layer undergoes a prominent insulator-metal transition. A roughly two-fold increase in the Gilbert damping parameter, $α$, with temperature was attributed to the change in the VO$_2$/NiFe interface spin absorption across the VO$_2$ phase transition. More remarkably, a large modulation ($\pm$100%) and a sign change of the current-induced spin-orbit torque across the VO$_2$ phase transition suggest two competing spin-orbit torque generating mechanisms. The bulk spin Hall effect in metallic VO$_2$, corroborated by our first-principles calculation of spin Hall conductivity, $σ_{SH} \approx 10^4 \frac{\hbar}{e} Ω^{-1} m^{-1}$, is verified as the main source of the spin-orbit torque in the metallic phase. The self-induced/anomalous torque in NiFe, of the opposite sign and a similar magnitude to the bulk spin Hall effect in metallic VO$_2$, could be the other competing mechanism that dominates as temperature decreases. For applications, the strong tunability of the torque strength and direction opens a new route to tailor spin-orbit torques of materials which undergo phase transitions for new device functionalities.

cond-mat.mtrl-sci↗

Average power scaling of THz spintronic emitters in reflection geometry

Metallic spintronic THz emitters have become well-established for offering ultra-broadband, gap-less THz emission in a variety of excitation regimes, in combination with reliable fabrication and excellent scalability. However, so far, their potential for high-average-power excitation to reach strong THz fields at high repetition rates has not been thoroughly investigated. In this article, we explore the power scaling behavior of tri-layer spintronic emitters using an Yb-fiber excitation source, delivering an average power of 18.5 W at 400 kHz repetition rate, temporally compressed to a pulse duration of 27 fs. We confirm that the reflection geometry with back-side cooling is ideally suited for these emitters in the high-average-power excitation regime. In order to understand limiting mechanisms, we disentangle the effects on THz power generation by average power and pulse energy, by varying the repetition rate of the laser. Our results show that the conversion efficiency remains mostly dependent on the incident fluence in this high-average-power, high-repetition-rate excitation regime if the emitters are efficiently cooled. Using these findings, we optimize the conversion efficiency to reach 5e-6 at highest excitation powers in the back-cooled reflection geometry. Our findings provide guidelines for scaling the power of THz radiation emitted by spintronic emitters to the mW-level by using state-of-the-art femtosecond sources with multi-hundred-Watt average power to reach ultra-broadband, strong-field THz sources with high repetition rate.

physics.optics↗

Transition of laser-induced terahertz spin currents from torque- to conduction-electron-mediated transport

Spin transport is crucial for future spintronic devices operating at bandwidths up to the terahertz (THz) range. In F|N thin-film stacks made of a ferro/ferrimagnetic layer F and a normal-metal layer N, spin transport is mediated by (1) spin-polarized conduction electrons and/or (2) torque between electron spins. To identify a cross-over from (1) to (2), we study laser-driven spin currents in F|Pt stacks where F consists of model materials with different degrees of electrical conductivity. For the magnetic insulators YIG, GIG and maghemite, identical dynamics is observed. It arises from the THz interfacial spin Seebeck effect (SSE), is fully determined by the relaxation of the electrons in the metal layer and provides an estimate of the spin-mixing conductance of the GIG/Pt interface. Remarkably, in the half-metallic ferrimagnet Fe3O4 (magnetite), our measurements reveal two spin-current components with opposite direction. The slower, positive component exhibits SSE dynamics and is assigned to torque-type magnon excitation of the A- and B-spin sublattices of Fe3O4. The faster, negative component arises from the pyro-spintronic effect and can consistently be assigned to ultrafast demagnetization of e-sublattice minority-spin hopping electrons. This observation supports the magneto-electronic model of Fe3O4. In general, our results provide a new route to the contact-free separation of torque- and conduction-electron-mediated spin currents.

cond-mat.mes-hall↗