arXiv subjects

Ghada Badawy

Publications and source records attributed to Ghada Badawy.

27 records · Page 2Linked to original sources

arXiv2022

Variable and orbital-dependent spin-orbit field orientations in a InSb double quantum dot characterized via dispersive gate sensing

Utilizing dispersive gate sensing (DGS), we investigate the spin-orbit field ($\textbf{B}_{SO}$) orientation in a many-electron double quantum dot (DQD) defined in an InSb nanowire. While characterizing the inter-dot tunnel couplings, the measured dispersive signal depends on the electron charge occupancy, as well as on the amplitude and orientation of the external magnetic field. The dispersive signal is mostly insensitive to the external field orientation when a DQD is occupied by a total odd number of electrons. For a DQD occupied by a total even number of electrons, the dispersive signal is reduced when the finite external magnetic field aligns with the effective $\textbf{B}_{SO}$ orientation. This fact enables the identification of $\textbf{B}_{SO}$ orientations for different DQD electron occupancies. The $\textbf{B}_{SO}$ orientation varies drastically between charge transitions, and is generally neither perpendicular to the nanowire nor in the chip plane. Moreover, $\textbf{B}_{SO}$ is similar for pairs of transitions involving the same valence orbital, and varies between such pairs. Our work demonstrates the practicality of DGS in characterizing spin-orbit interactions in quantum dot systems, without requiring any current flow through the device.

cond-mat.mes-hall↗

arXiv2022

Parametric exploration of zero-energy modes in three-terminal InSb-Al nanowire devices

We systematically study three-terminal InSb-Al nanowire devices by using radio-frequency reflectometry. Tunneling spectroscopy measurements on both ends of the hybrid nanowires are performed while systematically varying the chemical potential, magnetic field and junction transparencies. Identifying the lowest-energy state allows for the construction of lowest- and zero-energy state diagrams, which show how the states evolve as a function of the aforementioned parameters. Importantly, comparing the diagrams taken for each end of the hybrids enables the identification of states which do not coexist simultaneously, ruling out a significant amount of the parameter space as candidates for a topological phase. Furthermore, altering junction transparencies filters out zero-energy states sensitive to a local gate potential. Such a measurement strategy significantly reduces the time necessary to identify a potential topological phase and minimizes the risk of falsely recognizing trivial bound states as Majorana zero modes.

cond-mat.mes-hall↗

arXiv2021

Electronic Structure and Epitaxy of CdTe Shells on InSb Nanowires

Indium antimonide (InSb) nanowires are used as building blocks for quantum devices because of their unique properties, i.e., strong spin-orbit interaction and large Landé g-factor. Integrating InSb nanowires with other materials could potentially unfold novel devices with distinctive functionality. A prominent example is the combination of InSb nanowires with superconductors for the emerging topological particles research. Here, we combine the II-VI cadmium telluride (CdTe) with the III-V InSb in the form of core-shell (InSb-CdTe) nanowires and explore potential applications based on the electronic structure of the InSb-CdTe interface and the epitaxy of CdTe on the InSb nanowires. We determine the electronic structure of the InSb-CdTe interface using density functional theory and extract a type-I band alignment with a small conduction band offset ($\leq$ 0.3 eV). These results indicate the potential application of these shells for surface passivation or as tunnel barriers in combination with superconductors. In terms of the structural quality of these shells, we demonstrate that the lattice-matched CdTe can be grown epitaxially on the InSb nanowires without interfacial strain or defects. These epitaxial shells do not introduce disorder to the InSb nanowires as indicated by the comparable field-effect mobility we measure for both uncapped and CdTe-capped nanowires.

cond-mat.mtrl-sci↗

arXiv2021

Radio-frequency C-V measurements with sub-attofarad sensitivity

We demonstrate the use of radio-frequency (rf) resonators to measure the capacitance of nano-scale semiconducting devices in field-effect transistor configurations. The rf resonator is attached to the gate or the lead of the device. Consequently, tuning the carrier density in the conducting channel of the device affects the resonance frequency, quantitatively reflecting its capacitance. We test the measurement method on InSb and InAs nanowires at dilution-refrigerator temperatures. The measured capacitances are consistent with those inferred from the periodicity of the Coulomb blockade of quantum dots realized in the same devices. In an implementation of the resonator using an off-chip superconducting spiral inductor we find sensitivity values reaching down to 75~zF/$\sqHz$ at 1~kHz measurement bandwidth, and noise down to 0.45~aF at 1~Hz bandwidth. We estimate the sensitivity of the method for a number of other implementations. In particular we predict typical sensitivity of about 40~zF/$\sqHz$ at room temperature with a resonator comprised of off-the-shelf components. Of several proposed applications, we demonstrate two: the capacitance measurement of several identical 80~nm-wide gates with a single resonator, and the field-effect mobility measurement of an individual nanowire with the gate capacitance measured in-situ.

cond-mat.mes-hall↗

arXiv2021

Triple Andreev dot chains in semiconductor nanowires

Kitaev chain is a theoretical model of a one-dimensional topological superconductor with Majorana zero modes at the two ends of the chain. With the goal of emulating this model, we build a chain of three quantum dots in a semiconductor nanowire. We observe Andreev bound states in each of the three dots and study their magnetic field and gate voltage dependence. Theory indicates that triple dot states acquire Majorana polarization when Andreev states in all three dots reach zero energy in a narrow range of magnetic field. In our device Andreev states in one of the dots reach zero energy at a lower field than in other two, placing the Majorana regime out of reach. Devices with greater uniformity or with independent control over superconductor-semiconductor coupling should can realize the Kitaev chain with high yield. Due to its overall tunability and design flexibility the quantum dot system remains promising for quantum simulation of interesting models and in particular for modular topological quantum devices.

cond-mat.mes-hall↗

arXiv2021

Supercurrent parity-meter in a nanowire Cooper-pair transistor

We study a Cooper-pair transistor realized by two Josephson weak links that enclose a superconducting island in an InSb-Al hybrid nanowire. When the nanowire is subject to a magnetic field, isolated subgap levels arise in the superconducting island and, due to the Coulomb blockade,mediate a supercurrent by coherent co-tunneling of Cooper pairs. We show that the supercurrent resulting from such co-tunneling events exhibits, for low to moderate magnetic fields, a phase offset that discriminates even and odd charge ground states on the superconducting island. Notably,this phase offset persists when a subgap state approaches zero energy and, based on theoretical considerations, permits parity measurements of subgap states by supercurrent interferometry. Such supercurrent parity measurements could, in a new series of experiments, provide an alternative approach for manipulating and protecting quantum information stored in the isolated subgap levels of superconducting islands.

cond-mat.mes-hall↗

arXiv2020

Single-shot fabrication of semiconducting-superconducting nanowire devices

Semiconducting-superconducting nanowires attract widespread interest owing to the possible presence of non-abelian Majorana zero modes, which hold promise for topological quantum computation. However, the search for Majorana signatures is challenging because reproducible hybrid devices with desired nanowire lengths and material parameters need to be reliably fabricated to perform systematic explorations in gate voltages and magnetic fields. Here, we exploit a fabrication platform based on shadow walls that enables the in-situ, selective and consecutive depositions of superconductors and normal metals to form normal-superconducting junctions. Crucially, this method allows to realize devices in a single shot, eliminating fabrication steps after the synthesis of the fragile semiconductor/superconductor interface. At the atomic level, all investigated devices reveal a sharp and defect-free semiconducting-superconducting interface and, correspondingly, we measure electrically a hard induced superconducting gap. While our advancement is of crucial importance for enhancing the yield of complex hybrid devices, it also offers a straightforward route to explore new material combinations for hybrid devices.

cond-mat.mes-hall↗

arXiv2020

Shadow-wall lithography of ballistic superconductor-semiconductor quantum devices

The realization of a topological qubit calls for advanced techniques to readily and reproducibly engineer induced superconductivity in semiconductor nanowires. Here, we introduce an on-chip fabrication paradigm based on shadow walls that offers substantial advances in device quality and reproducibility. It allows for the implementation of novel quantum devices and ultimately topological qubits while eliminating many fabrication steps such as lithography and etching. This is critical to preserve the integrity and homogeneity of the fragile hybrid interfaces. The approach simplifies the reproducible fabrication of devices with a hard induced superconducting gap and ballistic normal-/superconductor junctions. Large gate-tunable supercurrents and high-order multiple Andreev reflections manifest the exceptional coherence of the resulting nanowire Josephson junctions. Our approach enables, in particular, the realization of 3-terminal devices, where zero-bias conductance peaks emerge in a magnetic field concurrently at both boundaries of the one-dimensional hybrids.

cond-mat.mes-hall↗

arXiv2019

Spin transport in ferromagnet-InSb nanowire quantum devices

Signatures of Majorana zero modes (MZMs), which are the building blocks for fault-tolerant topological quantum computing, have been observed in semiconductor nanowires (NW) with strong spin-orbital-interaction (SOI), such as InSb and InAs NWs with proximity-induced superconductivity. Realizing topological superconductivity and MZMs in this most widely-studied platform also requires eliminating spin degeneracy, which is realized by applying a magnetic field to induce a helical gap. However, the applied field can adversely impact the induced superconducting state in the NWs and also places geometric restrictions on the device, which can affect scaling of future MZM-based quantum registers. These challenges could be circumvented by integrating magnetic elements with the NWs. With this motivation, in this work we report the first experimental investigation of spin transport across InSb NWs, which are enabled by devices with ferromagnetic (FM) contacts. We observe signatures of spin polarization and spin-dependent transport in the quasi-one-dimensional ballistic regime. Moreover, we show that electrostatic gating tunes the observed magnetic signal and also reveals a transport regime where the device acts as a spin filter. These results open an avenue towards developing MZM devices in which spin degeneracy is lifted locally, without the need of an applied magnetic field. They also provide a path for realizing spin-based devices that leverage spin-orbital states in quantum wires.

cond-mat.mes-hall↗