arXiv subjects

Ghaith Hattab

Publications and source records attributed to Ghaith Hattab.

15 recordsLinked to original sources

arXiv2022

Multiband Massive IoT: A Learning Approach to Infrastructure Deployment

We consider a novel ultra-narrowband (UNB) low-power wide-area network (LPWAN) architecture design for uplink transmission of a massive number of Internet of Things (IoT) devices over multiple multiplexing bands. An IoT device can randomly choose any of the multiplexing bands to transmit its packet. Due to hardware constraints, a base station (BS) is able to listen to only one multiplexing band. Our main objective is to maximize the packet decoding probability (PDP) by optimizing the placement of the BSs and frequency assignment of BSs to multiplexing bands. We develop two online approaches that adapt to the environment based on the statistics of (un)successful packets at the BSs. The first approach is based on a predefined model of the environment, while the second approach is measurement-based model-free approach, which is applicable to any environment. The benefit of the model-based approach is a lower training complexity, at the risk of a poor fit in a model-incompatible environment. The simulation results show that our proposed approaches to band assignment and BS placement offer significant improvement in PDP over baseline random approaches and perform closely to the theoretical upper bound.

eess.SP↗

arXiv2020

Band Assignment in Ultra-Narrowband (UNB) Systems for Massive IoT Access

In this work, we consider a novel type of Internet of Things (IoT) ultra-narrowband (UNB) network architecture that involves multiple multiplexing bands or channels for uplink transmission. An IoT device can randomly choose any of the multiplexing bands and transmit its packet. Due to hardware constraints, a base station (BS) is able to listen to only one multiplexing band. The hardware constraint is mainly due to the complexity of performing fast Fourier transform (FFT) at a very small sampling interval over the multiplexing bands in order to counter the uncertainty of IoT device frequency and synchronize onto transmissions. The objective is to find an assignment of BSs to multiplexing bands in order to maximize the packet decoding probability (PDP). We develop a learning-based algorithm based on a sub-optimal solution to PDP maximization. The simulation results show that our approach to band assignment achieves near-optimal performance in terms of PDP, while at the same time, significantly exceeding the performance of random assignment. We also develop a heuristic algorithm with no learning overhead based on the locations of the BSs that also outperforms random assignment and serves as a performance reference to our learning-based algorithm.

eess.SP↗

arXiv2020

Spectrum Sharing for Massive Access in Ultra-Narrowband IoT Systems

Ultra-narrowband (UNB) communications has become a signature feature for many emerging low-power wide-area (LPWA) networks. Specifically, using extremely narrowband signals helps the network connect more Internet-of-things (IoT) devices within a given band. It also improves robustness to interference, extending the coverage of the network. In this paper, we study the coexistence capability of UNB networks and their scalability to enable massive access. To this end, we develop a stochastic geometry framework to analyze and model UNB networks on a large scale. The framework captures the unique characteristics of UNB communications, including the asynchronous time-frequency access, signal repetition, and the absence of base station (BS) association. Closed-form expressions of the transmission success probability and network connection density are presented for several UNB protocols. We further discuss multiband access for UNB networks, proposing a low-complexity protocol. Our analysis reveals several insights on the geographical diversity achieved when devices do not connect to a single BS, the optimal number of signal repetitions, and how to utilize multiple bands without increasing the complexity of BSs. Simulation results are provided to validate the analysis, and they show that UNB communications enables a single BS to connect thousands of devices even when the spectrum is shared with other networks.

eess.SP↗

arXiv2020

Energy-Efficient Massive IoT Shared Spectrum Access over UAV-enabled Cellular Networks

Data aggregation has become an emerging paradigm to support massive Internet-of-things (IoT), a new and critical use case for fifth-generation new radio (5G-NR). Indeed, data aggregators can complement cellular base stations and process IoT traffic to reduce network congestion. In this paper, we consider using mobile data aggregators, e.g., drones, that collect IoT traffic and aggregate them to the network. Specifically, we first discuss how the spectrum can be shared between cellular users (UEs) and IoT devices in the presence of drones, proposing a time-division duplexing protocol. We use stochastic geometry to analyze this protocol, comparing it to the standard spectrum sharing and orthogonal allocation protocols. We then formulate a stochastic optimization problem to optimize the nominal IoT transmit power, maximizing the average energy-efficiency (EE) of the IoT device subject to interference constraints to protect UEs. Simulations are presented to validate the theoretical insights and the effectiveness of the proposed protocol. It is shown that using drones, to aggregate IoT traffic, improves the EE of IoT devices, yet the EE degrades as their altitudes increases. Equally important, optimizing the transmit power is critical to further improve the EE, while ensuring fair coexistence with UEs.

cs.IT↗

arXiv2019

Unlicensed Spectrum Sharing for Massive Internet-of-Things Communications

The unlicensed spectrum, although free, has become an invaluable resource toward enabling massive Internet-of-things (IoT) applications, where Internet-enabled devices are deployed at a large scale. However, realizing massive IoT connectivity over unlicensed bands requires efficient spectrum sharing among IoT devices and fair coexistence with other wireless networks. In this article, we discuss several spectrum sharing methods to address these intra- and inter-network sharing issues. To this end, we first consider ALOHA-based networks that avoid spectrum sensing, yet rely on diversity to improve connection density of random access. Then, we present sensing-based solutions such as unlicensed cellular access that help support a wider range of applications with different rate requirements and connection densities. Finally, we highlight future research directions for massive IoT connectivity over the unlicensed spectrum.

cs.NI↗

arXiv2018

Distributed Wideband Sensing-based Architecture for Unlicensed Massive IoT Communications

Providing Internet connectivity to a massive number of Internet-of-things (IoT) objects over the unlicensed spectrum requires: (i) identifying a very large number of narrowband channels in a wideband spectrum and (ii) aggressively reusing the available channels over space to accommodate the high density of IoT devices. To this end, we propose a sensing-based architecture that identifies spectral and spatial resources at a fine resolution. In particular, we first propose a sensing assignment scheduler, where each base station (BS) is assigned a subset of the spectrum to sense at a high resolution. We then propose a distributed sensing algorithm, where BSs locally process and share their sensing reports, so that each BS obtains occupancy information of the wideband spectrum at its location. Once the spatio-spectral resource blocks are identified, we further propose a distributed resource allocation algorithm that maintains high spatial reuse of spectral opportunities while limiting the intra-network and inter-network interference. Numerical simulations are presented to validate the effectiveness of the proposed distributed algorithms, comparing them to centralized and non-cooperative schemes. It is shown that our architecture identifies more spatio-spectral resources, with lower misdetection of incumbents. As a result, more IoT devices are connected with limited interference into incumbents.

eess.SP↗

arXiv2018

Performance Analysis of Uplink Cellular IoT Using Different Deployments of Data Aggregators

Data aggregation is an effective solution to enable cellular support of Internet-of-things (IoT) communications. Indeed, it helps alleviate channel congestion, reduce the communication range, and extend battery-lifetime. In this paper, we use stochastic geometry to analyze the performance of uplink cellular IoT using different deployment strategies of aggregators, including terrestrial and aerial ones, e.g., drones or unmanned aerial vehicles. We focus on IoT-specific performance metrics, that are typically used by 3GPP. Specifically, we derive closed-form expressions of the average transmit power consumption, which is key to determine the lifetime of IoT devices, as well as the maximum coupling loss, which is essential to determine the maximum coverage the cellular system can support. Simulation results are presented to validate the derived theoretical expressions. It is shown that aerial aggregators can significantly extend the device lifetime and provide superior coverage compared to other deployment strategies. In addition, random deployment performs well when aggregators are densely deployed, whereas optimizing the location of a single terrestrial aggregator is beneficial when devices are more clustered.

cs.IT↗

arXiv2018

Distributed Wideband Spatio-Spectral Sensing for Unlicensed Massive IoT Communications

In this paper, we propose a dynamic spectrum sensing-based architecture to provide connectivity for a massive number of Internet-of-things (IoT) objects over the unlicensed spectrum. Specifically, the architecture relies on deploying sensing access points (SAPs), e.g., small cells with sensing capabilities, that aim to (i) identify a large number of narrowband channels in a wideband spectrum, as many massive IoT applications have low-rate requirements, and (ii) aggressively reuse the unlicensed channels at the SAPs' locations as IoT devices typically transmit at low power, occupying a small spatial footprint. Instead of enforcing each SAP to sense the entire spectrum, we develop a sensing assignment scheduler that ensures each one senses a subset of the spectrum. We then develop a distributed spatio-spectral cooperative sensing algorithm that enables each SAP to have local information about the occupancy of the entire spectrum. We present numerical simulations to validate the effectiveness of the proposed system in the presence of WiFi access points (APs). It is shown that the proposed system outperforms non-cooperative and centralized schemes in terms of reliably identifying more available spatio-spectral blocks with a lower misdetection of transmitting WiFi APs.

eess.SP↗

arXiv2018

Spectrum Sharing Protocols based on Ultra-Narrowband Communications for Unlicensed Massive IoT

Ultra-narrowband (UNB) communications is an emerging paradigm that tackles two challenges to realizing massive Internet-of-things (IoT) connectivity over the unlicensed spectrum: the intra-network sharing, i.e., how the spectrum is shared among IoT devices, and the inter-network sharing, i.e., the coexistence of the IoT network with other incumbent networks. Specifically, intra-network sharing is enabled by using extremely narrowband signals to connect a massive number of IoT devices without any prior network synchronization. Further, to enhance robustness to incumbent interference, each IoT packet is sent multiple times, each at a different frequency within a single band. Nevertheless, the interplay between intra-network sharing and inter-technology coexistence at a large scale remains unclear. Thus, in this paper, we develop an analytical framework to model and analyze UNB networks. We use stochastic geometry to derive the probability of successful transmission, identifying the impact of intra- and inter-network interference on the performance. In addition to analyzing the existing single-band access protocols, we present two multiband schemes, where each BS listens to a single band for practical implementation. Different access protocols are further compared in terms of the transmission capacity, i.e., the maximum number of IoT devices a UNB protocol can support in the presence of incumbent networks. Several design insights are gleaned from the derived closed-form expressions, and simulation results are further provided to validate them.

eess.SP↗

arXiv2018

Uplink Interference Mitigation Techniques for Coexistence of 5G mmWave Users with Incumbents at 70 and 80 GHz

The millimeter wave spectra at 71-76GHz (70GHz) and 81-86GHz (80GHz) have the potential to endow fifth-generation new radio (5G-NR) with mobile connectivity at gigabit rates. However, a pressing issue is the presence of incumbent systems in these bands, which are primarily point-to-point fixed stations (FSs). In this paper, we first identify the key properties of incumbents by parsing databases of existing stations in major cities to devise several modeling guidelines and characterize their deployment geometry and antenna specifications. Second, we develop a detailed uplink interference framework to compute the aggregate interference from outdoor 5G-NR users into FSs. We then present several case studies in dense populated areas, using actual incumbent databases and building layouts. Our simulation results demonstrate promising 5G coexistence at 70GHz and 80GHz as the majority of FSs experience interference well below the noise floor thanks to the propagation losses in these bands and the deployment geometry of the incumbent and 5G systems. For the few FSs that may incur higher interference, we propose several passive interference mitigation techniques such as angular-based exclusion zones and spatial power control. Simulation results show that the techniques can effectively protect FSs, without tangible degradation of the 5G coverage.

eess.SP↗

arXiv2018

Coexistence of 5G mmWave Users with Incumbent Fixed Stations over 70 and 80 GHz

Millimeter wave spectrum access over the 70GHz and 80GHz is central to unlocking gigabit connectivity and meeting the explosive growth of mobile traffic. A pressing question, however, is whether fifth-generation (5G) systems can harmoniously coexist with the incumbents of these bands, which are primarily point-to-point fixed stations (FSs). To this end, we thoroughly analyze the impact of 5G coexistence on FSs. Specifically, we first analyze the geometry of existing FSs' deployment using actual databases of these stations. Then, we present a case study on the interference generated from users towards FSs in two populated areas in Chicago, where we use actual building databases to accurately compute the aggregate interference. The analysis and simulation results reveal that the deployment strategy of FSs and the high attenuation losses at 70/80GHz significantly limit the 5G interference, with the majority of FSs experiencing interference levels well below the noise floor.

cs.IT↗

arXiv2014

Multiband Spectrum Sensing: Challenges and Limitations

Multiband spectrum access presents the next generation of cognitive radio networks (CRNs), where multiple bands are sensed and accessed to enhance the network's throughput, improve spectrum's maintenance, and reduce handoff frequency and data transmission interruptions due to the activities of the primary users. In this paper, we discuss the challenges and limitations of the major multiband spectrum sensing techniques. Particularly, we highlight the edge-detection problem and examine several issues of the state-of-the-art wavelet-based techniques. We also study the compressive sensing problem. Finally, we highlight the promises of utilizing the angle-domain for the CRNs.

cs.IT↗

arXiv2014

Enhanced Pilot-Based Spectrum Sensing Algorithm

In this paper, we develop an enhanced pilot-based spectrum sensing algorithm for cognitive radio. Unlike conventional pilot-based detectors which merely detect the presence of pilot signals, the proposed detector also utilizes the presence of the signal that carries the actual information. We analytically compare the performance of the proposed detector with the conventional one, and we show that the detection performance is significantly improved.

cs.IT↗

arXiv2014

Reconfigurable Wireless Networks

Driven by the advent of sophisticated and ubiquitous applications, and the ever-growing need for information, wireless networks are without a doubt steadily evolving into profoundly more complex and dynamic systems. The user demands are progressively rampant, while application requirements continue to expand in both range and diversity. Future wireless networks, therefore, must be equipped with the ability to handle numerous, albeit challenging requirements. Network reconfiguration, considered as a prominent network paradigm, is envisioned to play a key role in leveraging future network performance and considerably advancing current user experiences. This paper presents a comprehensive overview of reconfigurable wireless networks and an in-depth analysis of reconfiguration at all layers of the protocol stack. Such networks characteristically possess the ability to reconfigure and adapt their hardware and software components and architectures, thus enabling flexible delivery of broad services, as well as sustaining robust operation under highly dynamic conditions. The paper offers a unifying framework for research in reconfigurable wireless networks. This should provide the reader with a holistic view of concepts, methods, and strategies in reconfigurable wireless networks. Focus is given to reconfigurable systems in relatively new and emerging research areas such as cognitive radio networks, cross-layer reconfiguration and software-defined networks. In addition, modern networks have to be intelligent and capable of self-organization. Thus, this paper discusses the concept of network intelligence as a means to enable reconfiguration in highly complex and dynamic networks. Finally, the paper is supported with several examples and case studies showing the tremendous impact of reconfiguration on wireless networks.

cs.NI↗

arXiv2014

Multiband Spectrum Access: Great Promises for Future Cognitive Radio Networks

Cognitive radio has been widely considered as one of the prominent solutions to tackle the spectrum scarcity. While the majority of existing research has focused on single-band cognitive radio, multiband cognitive radio represents great promises towards implementing efficient cognitive networks compared to single-based networks. Multiband cognitive radio networks (MB-CRNs) are expected to significantly enhance the network's throughput and provide better channel maintenance by reducing handoff frequency. Nevertheless, the wideband front-end and the multiband spectrum access impose a number of challenges yet to overcome. This paper provides an in-depth analysis on the recent advancements in multiband spectrum sensing techniques, their limitations, and possible future directions to improve them. We study cooperative communications for MB-CRNs to tackle a fundamental limit on diversity and sampling. We also investigate several limits and tradeoffs of various design parameters for MB-CRNs. In addition, we explore the key MB-CRNs performance metrics that differ from the conventional metrics used for single-band based networks.

cs.IT↗