arXiv subjects

Ghayoor Shah

Publications and source records attributed to Ghayoor Shah.

7 recordsLinked to original sources

arXiv2024

AROW: V2X-based Automated Right-of-Way Algorithm for Cooperative Intersection Management

Research in Cooperative Intersection Management (CIM), utilizing Vehicle-to-Everything (V2X) communication among Connected and/or Autonomous Vehicles (CAVs), is crucial for enhancing intersection safety and driving experience. CAVs can transceive basic and/or advanced safety information, thereby improving situational awareness at intersections. The focus of this study is on unsignalized intersections, particularly Stop Controlled-Intersections (SC-Is), where one of the main reasons involving crashes is the ambiguity among CAVs in SC-I crossing priority upon arriving at similar time intervals. Numerous studies have been performed on CIM for unsignalized intersections based on centralized and distributed systems in the presence and absence of Road-Side Unit (RSU), respectively. However, most of these studies are focused towards replacing SC-I where the scheduler provides spatio-temporal or sequence-based reservation to CAVs, or where it controls CAVs via kinematic commands. These methods cause CAVs to arrive at the intersection at non-conflicting times and cross without stopping. This logic is severely limited in real-world mixed traffic comprising human drivers where kinematic commands and other reservations cannot be implemented as intended. Thus, given the existence of SC-Is and mixed traffic, it is significant to develop CIM systems incorporating SC-I rules while assigning crossing priorities and resolving the related ambiguity. In this regard, we propose a distributed Automated Right-of-Way (AROW) algorithm for CIM to assign explicit SC-I crossing turns to CAVs and mitigate hazardous scenarios due to ambiguity towards crossing priority. The algorithm is validated with extensive experiments for its functionality, scalability, and robustness towards CAV non-compliance, and it outperforms the current solutions.

cs.NI↗

arXiv2023

Scalable Cellular V2X Solutions: Large-Scale Deployment Challenges of Connected Vehicle Safety Networks

Vehicle-to-Everything (V2X) communication is expected to accomplish a long-standing goal of the Connected and Autonomous Vehicle (CAV) community to bring connected vehicles to roads on a large scale. A major challenge, and perhaps the biggest hurdle on the path towards this goal is the scalability issues associated with it, especially when vehicular safety is concerned. As a major stakeholder, 3rd Generation Partnership Project (3GPP) based Cellular V2X (C-V2X) community has long been trying to research on whether vehicular networks are able to support the safety-critical applications in high-density vehicular scenarios. This paper attempts to answer this by first presenting an overview on the scalability challenges faced by 3GPP Release 14 Long Term Evolution C-V2X (LTE-V2X) using the PC5 sidelink interface for low and heavy-density traffic scenarios. Next, it demonstrates a series of solutions that address network congestion, packet losses and other scalability issues associated with LTE-V2X to enable this communication technology for commercial deployment. In addition, a brief survey is provided into 3GPP Release 16 5G New Radio V2X (NR-V2X) that utilizes the NR sidelink interface and works as an evolution of C-V2X towards better performance for V2X communications including new enhanced V2X (eV2X) scenarios that possess ultra-low-latency and high-reliability requirements.

cs.NI↗

arXiv2022

Prediction-aware and Reinforcement Learning based Altruistic Cooperative Driving

Autonomous vehicle (AV) navigation in the presence of Human-driven vehicles (HVs) is challenging, as HVs continuously update their policies in response to AVs. In order to navigate safely in the presence of complex AV-HV social interactions, the AVs must learn to predict these changes. Humans are capable of navigating such challenging social interaction settings because of their intrinsic knowledge about other agents behaviors and use that to forecast what might happen in the future. Inspired by humans, we provide our AVs the capability of anticipating future states and leveraging prediction in a cooperative reinforcement learning (RL) decision-making framework, to improve safety and robustness. In this paper, we propose an integration of two essential and earlier-presented components of AVs: social navigation and prediction. We formulate the AV decision-making process as a RL problem and seek to obtain optimal policies that produce socially beneficial results utilizing a prediction-aware planning and social-aware optimization RL framework. We also propose a Hybrid Predictive Network (HPN) that anticipates future observations. The HPN is used in a multi-step prediction chain to compute a window of predicted future observations to be used by the value function network (VFN). Finally, a safe VFN is trained to optimize a social utility using a sequence of previous and predicted observations, and a safety prioritizer is used to leverage the interpretable kinematic predictions to mask the unsafe actions, constraining the RL policy. We compare our prediction-aware AV to state-of-the-art solutions and demonstrate performance improvements in terms of efficiency and safety in multiple simulated scenarios.

cs.RO↗

arXiv2022

Enabling a Cooperative Driver Messenger System for Lane Change Assistance Application

Sensor data and Vehicle-to-Everything (V2X) communication can greatly assist Connected and Autonomous Vehicles (CAVs) in situational awareness and provide a safer driving experience. While sensor data recorded from devices such as radar and camera can assist in local awareness in the close vicinity of the Host Vehicle (HV), the information obtained is useful solely for the HV itself. On the other hand, V2X communication can allow CAVs to communicate with each other and transceive basic and/or advanced safety information, allowing each CAV to create a sophisticated local object map for situational awareness. This paper introduces a point-to-point Driver Messenger System (DMS) that regularly maintains a local object map of the HV and uses it to convey HV's Over-the-Air (OTA) Driver Intent Messages (DIMs) to nearby identified Target Vehicle(s) (TV(s)) based on a list of pre-defined common traffic applications. The focus of this paper is on the lane change application where DMS can use the local object map to automatically identify closest TV in adjacent lane in the direction of HV's intended lane change and inform the TV via a DIM. Within DMS, the paper proposes a TV recognition algorithm for lane change application that utilizes the HV's Path History (PH) to accurately determine the closest TV that could potentially benefit from receiving a DIM from HV. Finally, DMS is also shown to act as an advanced warning system by providing extra time and space headway measurements between the HV and TVs upon a number of simulated lane change scenarios.

cs.NI↗

arXiv2021

RVE-CV2X: A Scalable Emulation Framework for Real-Time Evaluation of CV2X-Based Connected Vehicle Applications

Vehicle-to-Everything (V2X) communication has become an integral component of Intelligent Transportation Systems (ITS) due to its ability to connect vehicles, pedestrians, infrastructure, and create situational awareness among vehicles. Cellular-Vehicle-to-Everything (C-V2X), based on 3rd Generation Partnership Project (3GPP) Release 14, is one such communication technology that has recently gained significant attention to cater the needs of V2X communication. However, for a successful deployment of C-V2X, it is of paramount significance to thoroughly test the performance of this technology. It is unfeasible to physically conduct a V2X communication experiment to test the performance of C-V2X by arranging hundreds of real vehicles and their transceiving on-board units. Although multiple simulators based on frameworks such as NS-3, OMNET++ and OPNET have proven to be reliable and economic alternatives to using real vehicles, all these simulators are time-consuming and require several orders of magnitudes longer than the actual simulation time. As opposed to physical field- and simulation-based testing, network emulators can provide more realistic and repeatable results for testing vehicular communication. This paper proposes a real-time, high-fidelity, hardware-in-the-loop network emulator (RVE-CV2X) based on C-V2X mode 4 that can provide scalable, reliable and repeatable testing scenarios for V2X communication. The accuracy of this emulator is verified by comparing it to an already validated C-V2X simulator based on the NS-3 framework.

cs.NI↗

arXiv2020

A Maneuver-based Urban Driving Dataset and Model for Cooperative Vehicle Applications

Short-term future of automated driving can be imagined as a hybrid scenario in which both automated and human-driven vehicles co-exist in the same environment. In order to address the needs of such road configuration, many technology solutions such as vehicular communication and predictive control for automated vehicles have been introduced in the literature. Both aforementioned solutions rely on driving data of the human driver. In this work, we investigate the currently available driving datasets and introduce a real-world maneuver-based driving dataset that is collected during our urban driving data collection campaign. We also provide a model that embeds the patterns in maneuver-specific samples. Such model can be employed for classification and prediction purposes.

eess.SP↗

arXiv2019

Real-Time Hardware-In-the-Loop Emulation Framework for DSRC-based Connected Vehicle Applications

The rapid growth of connected and automated vehicle (CAV) solutions have made a significant impact on the safety of intelligent transportation systems. However, similar to any other emerging technology, thorough testing and evaluation studies are of paramount importance for the effectiveness of these solutions. Due to the safety-critical nature of this problem, large-scale real-world field tests do not seem to be a feasible and practical option. Thus, employing simulation and emulation approaches are preferred in the development phase of the safety-related applications in CAVs. Such methodologies not only mitigate the high cost of deploying large number of real vehicles, but also enable researchers to exhaustively perform repeatable tests in various scenarios. Software simulation of very large-scale vehicular scenarios is mostly a time consuming task and as a matter of fact, any simulation environment would include abstractions in order to model the real-world system. In contrast to the simulation-based solutions, network emulators are able to produce more realistic test environments. In this work, we propose a high-fidelity hardware-in-the-loop network emulator framework in order to create testing environments for vehicle-to-vehicle (V2V) communication. The proposed architecture is able to run in real-time fashion in contrast to other existing systems, which can potentially boost the development and validation of V2V systems.

cs.NI↗