arXiv subjects

Giacomo Indiveri

Publications and source records attributed to Giacomo Indiveri.

At least 91 records · Page 5Linked to original sources

arXiv2020

Closed-loop spiking control on a neuromorphic processor implemented on the iCub

Despite neuromorphic engineering promises the deployment of low latency, adaptive and low power systems that can lead to the design of truly autonomous artificial agents, the development of a fully neuromorphic artificial agent is still missing. While neuromorphic sensing and perception, as well as decision-making systems, are now mature, the control and actuation part is lagging behind. In this paper, we present a closed-loop motor controller implemented on mixed-signal analog-digital neuromorphic hardware using a spiking neural network. The network performs a proportional control action by encoding target, feedback, and error signals using a spiking relational network. It continuously calculates the error through a connectivity pattern, which relates the three variables by means of feed-forward connections. Recurrent connections within each population are used to speed up the convergence, decrease the effect of mismatch and improve selectivity. The neuromorphic motor controller is interfaced with the iCub robot simulator. We tested our spiking P controller in a single joint control task, specifically for the robot head yaw. The spiking controller sends the target positions, reads the motor state from its encoder, and sends back the motor commands to the joint. The performance of the spiking controller is tested in a step response experiment and in a target pursuit task. In this work, we optimize the network structure to make it more robust to noisy inputs and device mismatch, which leads to better control performances.

cs.ET↗

arXiv2020

Visual Pattern Recognition with on On-chip Learning: towards a Fully Neuromorphic Approach

We present a spiking neural network (SNN) for visual pattern recognition with on-chip learning on neuromorphichardware. We show how this network can learn simple visual patterns composed of horizontal and vertical bars sensed by a Dynamic Vision Sensor, using a local spike-based plasticity rule. During recognition, the network classifies the pattern's identity while at the same time estimating its location and scale. We build on previous work that used learning with neuromorphic hardware in the loop and demonstrate that the proposed network can properly operate with on-chip learning, demonstrating a complete neuromorphic pattern learning and recognition setup. Our results show that the network is robust against noise on the input (no accuracy drop when adding 130% noise) and against up to 20% noise in the neuron parameters.

cs.NE↗

arXiv2020

Ultra-Low-Power FDSOI Neural Circuits for Extreme-Edge Neuromorphic Intelligence

Recent years have seen an increasing interest in the development of artificial intelligence circuits and systems for edge computing applications. In-memory computing mixed-signal neuromorphic architectures provide promising ultra-low-power solutions for edge-computing sensory-processing applications, thanks to their ability to emulate spiking neural networks in real-time. The fine-grain parallelism offered by this approach allows such neural circuits to process the sensory data efficiently by adapting their dynamics to the ones of the sensed signals, without having to resort to the time-multiplexed computing paradigm of von Neumann architectures. To reduce power consumption even further, we present a set of mixed-signal analog/digital circuits that exploit the features of advanced Fully-Depleted Silicon on Insulator (FDSOI) integration processes. Specifically, we explore the options of advanced FDSOI technologies to address analog design issues and optimize the design of the synapse integrator and of the adaptive neuron circuits accordingly. We present circuit simulation results and demonstrate the circuit's ability to produce biologically plausible neural dynamics with compact designs, optimized for the realization of large-scale spiking neural networks in neuromorphic processors.

cs.ET↗

arXiv2020

Precise neural network computation with imprecise analog devices

The operations used for neural network computation map favorably onto simple analog circuits, which outshine their digital counterparts in terms of compactness and efficiency. Nevertheless, such implementations have been largely supplanted by digital designs, partly because of device mismatch effects due to material and fabrication imperfections. We propose a framework that exploits the power of deep learning to compensate for this mismatch by incorporating the measured device variations as constraints in the neural network training process. This eliminates the need for mismatch minimization strategies and allows circuit complexity and power-consumption to be reduced to a minimum. Our results, based on large-scale simulations as well as a prototype VLSI chip implementation indicate a processing efficiency comparable to current state-of-art digital implementations. This method is suitable for future technology based on nanodevices with large variability, such as memristive arrays.

cs.NE↗

arXiv2019

Mapping high-performance RNNs to in-memory neuromorphic chips

The increasing need for compact and low-power computing solutions for machine learning applications has triggered significant interest in energy-efficient neuromorphic systems. However, most of these architectures rely on spiking neural networks, which typically perform poorly compared to their non-spiking counterparts in terms of accuracy. In this paper, we propose a new adaptive spiking neuron model that can be abstracted as a low-pass filter. This abstraction enables faster and better training of spiking networks using back-propagation, without simulating spikes. We show that this model dramatically improves the inference performance of a recurrent neural network and validate it with three complex spatio-temporal learning tasks: the temporal addition task, the temporal copying task, and a spoken-phrase recognition task. We estimate at least 500x higher energy-efficiency using our models on compatible neuromorphic chips in comparison to Cortex-M4, a popular embedded microprocessor.

cs.NE↗

arXiv2019

A recipe for creating ideal hybrid memristive-CMOS neuromorphic computing systems

The development of memristive device technologies has reached a level of maturity to enable the design of complex and large-scale hybrid memristive-CMOS neural processing systems. These systems offer promising solutions for implementing novel in-memory computing architectures for machine learning and data analysis problems. We argue that they are also ideal building blocks for the integration in neuromorphic electronic circuits suitable for ultra-low power brain-inspired sensory processing systems, therefore leading to the innovative solutions for always-on edge-computing and Internet-of-Things (IoT) applications. Here we present a recipe for creating such systems based on design strategies and computing principles inspired by those used in mammalian brains. We enumerate the specifications and properties of memristive devices required to support always-on learning in neuromorphic computing systems and to minimize their power consumption. Finally, we discuss in what cases such neuromorphic systems can complement conventional processing ones and highlight the importance of exploiting the physics of both the memristive devices and of the CMOS circuits interfaced to them.

cs.ET↗

arXiv2019

Real-time ultra-low power ECG anomaly detection using an event-driven neuromorphic processor

Accurate detection of pathological conditions in human subjects can be achieved through off-line analysis of recorded biological signals such as electrocardiograms (ECGs). However, human diagnosis is time-consuming and expensive, as it requires the time of medical professionals. This is especially inefficient when indicative patterns in the biological signals are infrequent. Moreover, patients with suspected pathologies are often monitored for extended periods, requiring the storage and examination of large amounts of non-pathological data, and entailing a difficult visual search task for diagnosing professionals. In this work we propose a compact and sub-mW low power neural processing system that can be used to perform on-line and real-time preliminary diagnosis of pathological conditions, to raise warnings for the existence of possible pathological conditions, or to trigger an off-line data recording system for further analysis by a medical professional. We apply the system to real-time classification of ECG data for distinguishing between healthy heartbeats and pathological rhythms. Multi-channel analog ECG traces are encoded as asynchronous streams of binary events and processed using a spiking recurrent neural network operated in a reservoir computing paradigm. An event-driven neuron output layer is then trained to recognize one of several pathologies. Finally, the filtered activity of this output layer is used to generate a binary trigger signal indicating the presence or absence of a pathological pattern. We validate the approach proposed using a Dynamic Neuromorphic Asynchronous Processor (DYNAP) chip, implemented using a standard 180 nm CMOS VLSI process, and present experimental results measured from the chip.

eess.SP↗

arXiv2019

Mapping Spiking Neural Networks to Neuromorphic Hardware

Neuromorphic hardware platforms implement biological neurons and synapses to execute spiking neural networks (SNNs) in an energy-efficient manner. We present SpiNeMap, a design methodology to map SNNs to crossbar-based neuromorphic hardware, minimizing spike latency and energy consumption. SpiNeMap operates in two steps: SpiNeCluster and SpiNePlacer. SpiNeCluster is a heuristic-based clustering technique to partition SNNs into clusters of synapses, where intracluster local synapses are mapped within crossbars of the hardware and inter-cluster global synapses are mapped to the shared interconnect. SpiNeCluster minimizes the number of spikes on global synapses, which reduces spike congestion on the shared interconnect, improving application performance. SpiNePlacer then finds the best placement of local and global synapses on the hardware using a meta-heuristic-based approach to minimize energy consumption and spike latency. We evaluate SpiNeMap using synthetic and realistic SNNs on the DynapSE neuromorphic hardware. We show that SpiNeMap reduces average energy consumption by 45% and average spike latency by 21%, compared to state-of-the-art techniques.

cs.ET↗

arXiv2019

An auto-scaling wide dynamic range current to frequency converter for real-time monitoring of signals in neuromorphic systems

Neuromorphic systems typically employ current-mode circuits that model neural dynamics and produce output currents that range from few pico-Amperes to hundreds of micro-Amperes. On-line real-time monitoring of the signals produced by these circuits is crucial, for prototyping and debugging purposes, as well as for analyzing and understanding the network dynamics and computational properties. To this end, we propose a compact on-chip auto-scaling Current to Frequency Converter (CFC) for real-time monitoring of analog currents in mixed-signal/analog neuromorphic electronic systems. The proposed CFC is a self-timed asynchronous circuit that has a wide dynamic input range of up to 6 decades, ranging from pico-Amps to micro-Amps, with high current measurement sensitivity. To produce a linear output frequency response, while properly covering the wide dynamic input range, the circuit automatically detects the scale of the input current and adjusts the scale of its output firing rate accordingly. Here we describe the proposed circuit and present experimental results measured from multiple instances of the circuit, implemented using a standard 180 nm CMOS process, and interfaced to silicon neuron and synapse circuits for real-time current monitoring. We demonstrate how the circuit is suitable for measuring neural dynamics by showing the converted response properties of the chip silicon neurons and synapses as they are stimulated by input spikes.

cs.ET↗

arXiv2019

Automatic gain control of ultra-low leakage synaptic scaling homeostatic plasticity circuits

Homeostatic plasticity is a stabilizing mechanism that allows neural systems to maintain their activity around a functional operating point. This is an extremely useful mechanism for neuromorphic computing systems, as it can be used to compensate for chronic shifts, for example due to changes in the network structure. However, it is important that this plasticity mechanism operates on time scales that are much longer than conventional synaptic plasticity ones, in order to not interfere with the learning process. In this paper we present a novel ultra-low leakage cell and an automatic gain control scheme that can adapt the gain of analog log-domain synapse circuits over extremely long time scales. To validate the proposed scheme, we implemented the ultra-low leakage cell in a standard 180 nm Complementary Metal-Oxide-Semiconductor (CMOS) process, and integrated it in an array of dynamic synapses connected to an adaptive integrate and fire neuron. We describe the circuit and demonstrate how it can be configured to scale the gain of all synapses afferent to the silicon neuron in a way to keep the neuron's average firing rate constant around a set operating point. The circuit occupies a silicon area of 84 μm x 22 μm and consumes approximately 10.8 nW with a 1.8 V supply voltage. It exhibits time constants of up to 25 kilo-seconds, thanks to a controllable leakage current that can be scaled down to 1.2 atto-Amps (7.5 electrons/s).

cs.ET↗

arXiv2019

A clock-less ultra-low power bit-serial LVDS link for Address-Event multi-chip systems

We present a power efficient clock-less fully asynchronous bit-serial Low Voltage Differential Signaling (LVDS) link with event-driven instant wake-up and self-sleep features, optimized for high speed inter-chip communication of asynchronous address-events between neuromorphic chips. The proposed LVDS link makes use of the Level-Encoded Dual-Rail (LEDR) representation and a token-ring architecture to encode and transmit data, avoiding the use of conventional large ClockData Recovery (CDR) modules with power-hungry DLL or PLL circuits. We implemented the LVDS circuits in a device fabricated with a standard 0.18 um CMOS process. The total silicon area used for such block is of 0.14 mm^2. We present experimental measurement results to demonstrate that, with a bit rate of 1.5 Gbps and an event width of 32-bit, the proposed LVDS link can achieve transmission event rates of 35.7 M Events/second with current consumption of 19.3 mA and 3.57 mA for receiver and transmitter blocks, respectively. Given the clock-less and instant on/off design choices made, the power consumption of the whole link depends linearly on the data transmission rate. We show that the current consumption can go down to sub-uA for low event rates (e.g., <1k Events/second), with a floor of 80 nA for transmitter and 42 nA for receiver, determined mainly by static off-leakage currents.

cs.ET↗

arXiv2019

A bi-directional Address-Event transceiver block for low-latency inter-chip communication in neuromorphic systems

Neuromorphic systems typically use the Address-Event Representation (AER) to transmit signals among nodes, cores, and chips. Communication of Address-Events (AEs) between neuromorphic cores/chips typically requires two parallel digital signal buses for Input/Output (I/O) operations. This requirement can become very expensive for large-scale systems in terms of both dedicated I/O pins and power consumption. In this paper we present a compact fully asynchronous event-driven transmitter/receiver block that is both power efficient and I/O efficient. This block implements high-throughput low-latency bi-directional communication through a parallel AER bus. We show that by placing the proposed AE transceiver block in two separate chips and linking them by a single AER bus, we can drive the communication and switch the transmission direction of the shared bus on a single event basis, from either side with low-latency. We present experimental results that validate the circuits proposed and demonstrate reliable bi-directional event transmission with high-throughput. The proposed AE block, integrated in a neuromorphic chip fabricated using a 28 nm FDSOI process, occupies a silicon die area of 140 μm x 70 μm. The experimental measurements show that the event-driven AE block combined with standard digital I/Os has a direction switch latency of 5 ns and can achieve a worst-case bi-directional event transmission throughput of 28.6M Events/second while consuming 11 pJ per event (26-bit) delivery.

cs.AR↗

arXiv2019

Analog circuits for mixed-signal neuromorphic computing architectures in 28 nm FD-SOI technology

Developing mixed-signal analog-digital neuromorphic circuits in advanced scaled processes poses significant design challenges. We present compact and energy efficient sub-threshold analog synapse and neuron circuits, optimized for a 28 nm FD-SOI process, to implement massively parallel large-scale neuromorphic computing systems. We describe the techniques used for maximizing density with mixed-mode analog/digital synaptic weight configurations, and the methods adopted for minimizing the effect of channel leakage current, in order to implement efficient analog computation based on pA-nA small currents. We present circuit simulation results, based on a new chip that has been recently taped out, to demonstrate how the circuits can be useful for both low-frequency operation in systems that need to interact with the environment in real-time, and for high-frequency operation for fast data processing in different types of spiking neural network architectures.

cs.ET↗

arXiv2019

A Spiking Network for Inference of Relations Trained with Neuromorphic Backpropagation

The increasing need for intelligent sensors in a wide range of everyday objects requires the existence of low power information processing systems which can operate autonomously in their environment. In particular, merging and processing the outputs of different sensors efficiently is a necessary requirement for mobile agents with cognitive abilities. In this work, we present a multi-layer spiking neural network for inference of relations between stimuli patterns in dedicated neuromorphic systems. The system is trained with a new version of the backpropagation algorithm adapted to on-chip learning in neuromorphic hardware: Error gradients are encoded as spike signals which are propagated through symmetric synapses, using the same integrate-and-fire hardware infrastructure as used during forward propagation. We demonstrate the strength of the approach on an arithmetic relation inference task and on visual XOR on the MNIST dataset. Compared to previous, biologically-inspired implementations of networks for learning and inference of relations, our approach is able to achieve better performance with less neurons. Our architecture is the first spiking neural network architecture with on-chip learning capabilities, which is able to perform relational inference on complex visual stimuli. These features make our system interesting for sensor fusion applications and embedded learning in autonomous neuromorphic agents.

cs.NE↗

arXiv2019

The importance of space and time in neuromorphic cognitive agents

Artificial neural networks and computational neuroscience models have made tremendous progress, allowing computers to achieve impressive results in artificial intelligence (AI) applications, such as image recognition, natural language processing, or autonomous driving. Despite this remarkable progress, biological neural systems consume orders of magnitude less energy than today's artificial neural networks and are much more agile and adaptive. This efficiency and adaptivity gap is partially explained by the computing substrate of biological neural processing systems that is fundamentally different from the way today's computers are built. Biological systems use in-memory computing elements operating in a massively parallel way rather than time-multiplexed computing units that are reused in a sequential fashion. Moreover, activity of biological neurons follows continuous-time dynamics in real, physical time, instead of operating on discrete temporal cycles abstracted away from real-time. Here, we present neuromorphic processing devices that emulate the biological style of processing by using parallel instances of mixed-signal analog/digital circuits that operate in real time. We argue that this approach brings significant advantages in efficiency of computation. We show examples of embodied neuromorphic agents that use such devices to interact with the environment and exhibit autonomous learning.

cs.NE↗

arXiv2019

An ultra-low-power sigma-delta neuron circuit

Neural processing systems typically represent data using leaky integrate and fire (LIF) neuron models that generate spikes or pulse trains at a rate proportional to their input amplitudes. This mechanism requires high firing rates when encoding time-varying signals, leading to increased power consumption. Neuromorphic systems that use adaptive LIF neuron models overcome this problem by encoding signals in the relative timing of their output spikes rather than their rate. In this paper, we analyze recent adaptive LIF neuron circuit implementations and highlight the analogies and differences between them and a first-order sigma-delta feedback loop. We propose a new sigma-delta neuron circuit that addresses some of the limitations in existing implementations and present simulation results that quantify the improvements. We show that the new circuit, implemented in a 1.8 V, 180 nm CMOS process, offers up to 42 dB signal-to-distortion ratio and consumes orders of magnitude lower energy. Finally, we also demonstrate how the sigma-delta interpretation enables mapping of real-valued recurrent neural network to the spiking framework to emphasize the envisioned application of the proposed circuit.

cs.ET↗

arXiv2018

A neuromorphic systems approach to in-memory computing with non-ideal memristive devices: From mitigation to exploitation

Memristive devices represent a promising technology for building neuromorphic electronic systems. In addition to their compactness and non-volatility features, they are characterized by computationally relevant physical properties, such as state-dependence, non-linear conductance changes, and intrinsic variability in both their switching threshold and conductance values, that make them ideal devices for emulating the bio-physics of real synapses. In this paper we present a spiking neural network architecture that supports the use of memristive devices as synaptic elements, and propose mixed-signal analog-digital interfacing circuits which mitigate the effect of variability in their conductance values and exploit their variability in the switching threshold, for implementing stochastic learning. The effect of device variability is mitigated by using pairs of memristive devices configured in a complementary push-pull mechanism and interfaced to a current-mode normalizer circuit. The stochastic learning mechanism is obtained by mapping the desired change in synaptic weight into a corresponding switching probability that is derived from the intrinsic stochastic behavior of memristive devices. We demonstrate the features of the CMOS circuits and apply the architecture proposed to a standard neural network hand-written digit classification benchmark based on the MNIST data-set. We evaluate the performance of the approach proposed on this benchmark using behavioral-level spiking neural network simulation, showing both the effect of the reduction in conductance variability produced by the current-mode normalizer circuit, and the increase in performance as a function of the number of memristive devices used in each synapse.

cs.ET↗

arXiv2018

Large-Scale Neuromorphic Spiking Array Processors: A quest to mimic the brain

Neuromorphic engineering (NE) encompasses a diverse range of approaches to information processing that are inspired by neurobiological systems, and this feature distinguishes neuromorphic systems from conventional computing systems. The brain has evolved over billions of years to solve difficult engineering problems by using efficient, parallel, low-power computation. The goal of NE is to design systems capable of brain-like computation. Numerous large-scale neuromorphic projects have emerged recently. This interdisciplinary field was listed among the top 10 technology breakthroughs of 2014 by the MIT Technology Review and among the top 10 emerging technologies of 2015 by the World Economic Forum. NE has two-way goals: one, a scientific goal to understand the computational properties of biological neural systems by using models implemented in integrated circuits (ICs); second, an engineering goal to exploit the known properties of biological systems to design and implement efficient devices for engineering applications. Building hardware neural emulators can be extremely useful for simulating large-scale neural models to explain how intelligent behavior arises in the brain. The principle advantages of neuromorphic emulators are that they are highly energy efficient, parallel and distributed, and require a small silicon area. Thus, compared to conventional CPUs, these neuromorphic emulators are beneficial in many engineering applications such as for the porting of deep learning algorithms for various recognitions tasks. In this review article, we describe some of the most significant neuromorphic spiking emulators, compare the different architectures and approaches used by them, illustrate their advantages and drawbacks, and highlight the capabilities that each can deliver to neural modelers.

cs.NE↗