arXiv subjects

Giammarco Caroleo

Publications and source records attributed to Giammarco Caroleo.

7 recordsLinked to original sources

arXiv2026

Continuum Robot Localization using Distributed Time-of-Flight Sensors

Localization and mapping of an environment are crucial tasks for any robot operating in unstructured environments. Time-of-flight (ToF) sensors (e.g.,~lidar) have proven useful in mobile robotics, where high-resolution sensors can be used for simultaneous localization and mapping. In soft and continuum robotics, however, these high-resolution sensors are too large for practical use. This, combined with the deformable nature of such robots, has resulted in continuum robot (CR) localization and mapping in unstructured environments being a largely untouched area. In this work, we present a localization technique for CRs that relies on small, low-resolution ToF sensors distributed along the length of the robot. By fusing measurement information with a robot shape prior, we show that accurate localization is possible despite each sensor experiencing frequent degenerate scenarios. We achieve an average localization error of 2.5cm in position and 7.2° in rotation across all experimental conditions with a 53cm long robot. We demonstrate that the results are repeated across multiple environments, in both simulation and real-world experiments, and study robustness in the estimation to deviations in the prior map.

cs.RO↗

arXiv2026

Diffusion-based Inverse Model of a Distributed Tactile Sensor for Object Pose Estimation

Tactile sensing provides a promising sensing modality for object pose estimation in manipulation settings where visual information is limited due to occlusion or environmental effects. However, efficiently leveraging tactile data for estimation remains a challenge due to partial observability, with single observations corresponding to multiple possible contact configurations. This limits conventional estimation approaches largely tailored to vision. We propose to address these challenges by learning an inverse tactile sensor model using denoising diffusion. The model is conditioned on tactile observations from a distributed tactile sensor and trained in simulation using a geometric sensor model based on signed distance fields. Contact constraints are enforced during inference through single-step projection using distance and gradient information from the signed distance field. For online pose estimation, we integrate the inverse model with a particle filter through a proposal scheme that combines generated hypotheses with particles from the prior belief. Our approach is validated in simulated and real-world planar pose estimation settings, without access to visual data or tight initial pose priors. We further evaluate robustness to unmodeled contact and sensor dynamics for pose tracking in a box-pushing scenario. Compared to local sampling baselines, the inverse sensor model improves sampling efficiency and estimation accuracy while preserving multimodal beliefs across objects with varying tactile discriminability.

cs.RO↗

arXiv2025

Improving Tactile Gesture Recognition with Optical Flow

Tactile gesture recognition systems play a crucial role in Human-Robot Interaction (HRI) by enabling intuitive communication between humans and robots. The literature mainly addresses this problem by applying machine learning techniques to classify sequences of tactile images encoding the pressure distribution generated when executing the gestures. However, some gestures can be hard to differentiate based on the information provided by tactile images alone. In this paper, we present a simple yet effective way to improve the accuracy of a gesture recognition classifier. Our approach focuses solely on processing the tactile images used as input by the classifier. In particular, we propose to explicitly highlight the dynamics of the contact in the tactile image by computing the dense optical flow. This additional information makes it easier to distinguish between gestures that produce similar tactile images but exhibit different contact dynamics. We validate the proposed approach in a tactile gesture recognition task, showing that a classifier trained on tactile images augmented with optical flow information achieved a 9% improvement in gesture classification accuracy compared to one trained on standard tactile images.

cs.RO↗

arXiv2025

Tiny LiDARs for Manipulator Self-Awareness: Sensor Characterization and Initial Localization Experiments

For several tasks, ranging from manipulation to inspection, it is beneficial for robots to localize a target object in their surroundings. In this paper, we propose an approach that utilizes coarse point clouds obtained from miniaturized VL53L5CX Time-of-Flight (ToF) sensors (tiny LiDARs) to localize a target object in the robot's workspace. We first conduct an experimental campaign to calibrate the dependency of sensor readings on relative range and orientation to targets. We then propose a probabilistic sensor model, which we validate in an object pose estimation task using a Particle Filter (PF). The results show that the proposed sensor model improves the performance of the localization of the target object with respect to two baselines: one that assumes measurements are free from uncertainty and one in which the confidence is provided by the sensor datasheet.

cs.RO↗

arXiv2025

Estimating Scene Flow in Robot Surroundings with Distributed Miniaturized Time-of-Flight Sensors

Tracking motions of humans or objects in the surroundings of the robot is essential to improve safe robot motions and reactions. In this work, we present an approach for scene flow estimation from low-density and noisy point clouds acquired from miniaturized Time of Flight (ToF) sensors distributed on the robot body. The proposed method clusters points from consecutive frames and applies Iterative Closest Point (ICP) to estimate a dense motion flow, with additional steps introduced to mitigate the impact of sensor noise and low-density data points. Specifically, we employ a fitness-based classification to distinguish between stationary and moving points and an inlier removal strategy to refine geometric correspondences. The proposed approach is validated in an experimental setup where 24 ToF are used to estimate the velocity of an object moving at different controlled speeds. Experimental results show that the method consistently approximates the direction of the motion and its magnitude with an error which is in line with sensor noise.

cs.RO↗

arXiv2025

Diffusion-based Inverse Observation Model for Artificial Skin

Contact-based estimation of object pose is challenging due to discontinuities and ambiguous observations that can correspond to multiple possible system states. This multimodality makes it difficult to efficiently sample valid hypotheses while respecting contact constraints. Diffusion models can learn to generate samples from such multimodal probability distributions through denoising algorithms. We leverage these probabilistic modeling capabilities to learn an inverse observation model conditioned on tactile measurements acquired from a distributed artificial skin. We present simulated experiments demonstrating efficient sampling of contact hypotheses for object pose estimation through touch.

cs.RO↗

arXiv2025

Soft Robot Localization Using Distributed Miniaturized Time-of-Flight Sensors

Thanks to their compliance and adaptability, soft robots can be deployed to perform tasks in constrained or complex environments. In these scenarios, spatial awareness of the surroundings and the ability to localize the robot within the environment represent key aspects. While state-of-the-art localization techniques are well-explored in autonomous vehicles and walking robots, they rely on data retrieved with lidar or depth sensors which are bulky and thus difficult to integrate into small soft robots. Recent developments in miniaturized Time of Flight (ToF) sensors show promise as a small and lightweight alternative to bulky sensors. These sensors can be potentially distributed on the soft robot body, providing multi-point depth data of the surroundings. However, the small spatial resolution and the noisy measurements pose a challenge to the success of state-of-the-art localization algorithms, which are generally applied to much denser and more reliable measurements. In this paper, we enforce distributed VL53L5CX ToF sensors, mount them on the tip of a soft robot, and investigate their usage for self-localization tasks. Experimental results show that the soft robot can effectively be localized with respect to a known map, with an error comparable to the uncertainty on the measures provided by the miniaturized ToF sensors.

cs.RO↗