arXiv subjects

Gian Guido Gentili

Publications and source records attributed to Gian Guido Gentili.

7 recordsLinked to original sources

arXiv2026

A Body-of-Revolution Human Model for RF Sensing with Measurement-Driven Calibration for Indoor Environments

Model training for Device-Free Localization (DFL) and Radio-Frequency (RF) sensing systems heavily relies on large-scale datasets, which are costly and time-consuming to obtain through measurements across different environments and sensing configurations. Lightweight yet physically consistent propagation models are therefore critical for efficient generation of realistic RF sensing data. This paper presents an RF sensing prediction approach for indoor environments based on a Body of Revolution (BoR) human model. A fast 2.5-Dimensional Finite Element Method (2.5-D FEM) is proposed for computing the scattering fields of a human-like BoR model under the excitation of a vertical polarized dipole. Through comparisons, the proposed BoR model is shown to preserve scattering characteristics close to 3-D human bodies while yielding a smaller computational cost compared to a simple cylindrical model. A measurement-driven background-field modeling approach is further introduced for practical indoor applications, accounting for the complex propagation effects of indoor environments implicitly. Comparing with measurements of a typical indoor DFL scenario, the proposed approach achieves approximately 85% prediction accuracy and reproduces the spatial Received Signal Strength Indicator (RSSI) variations observed in practice, proving its potential for RF sensing prediction and large-scale database generation at a fraction of the computational cost required for full-wave simulations.

eess.SP↗

arXiv2026

Efficient 2.5-D FEM-Based Scattering Analysis of the Human Body for RF Sensing

Model training for Device-Free Localization (DFL) and Radio-Frequency (RF) sensing heavily relies on large-scale datasets, which are difficult, expensive, and time-consuming to obtain through measurements. This paper proposes a fast 2.5-dimensional Finite Element Method (2.5-D FEM) for computing the scattering fields of a Body of Revolution (BoR) human model under the excitation of a z-directed dipole. The proposed method can evaluate the effect of human micro-movements through the statistical characteristics of the Received Signal Strength Indicator (RSSI). The numerical accuracy and the practical applicability of the proposed method are validated through comparisons with full-wave simulations and indoor RF sensing experiments. The simulation results show agreement with the experimental measurements, demonstrating that the method is a reliable tool for evaluating micro-movement-induced statistical variations. The proposed method provides a practical and efficient means for generating large-scale, labeled RF training datasets, thereby accelerating the development of indoor localization tools as well as the calibration and tuning of tomographic reconstruction methods.

eess.SP↗

arXiv2023

Advanced Modeling of Rectangular Waveguide Devices with Smooth Profiles by Hierarchical Model Reduction

We present a new method for the analysis of smoothly varying tapers, transitions and filters in rectangular waveguides. With this aim, we apply a Hierarchical Model (HiMod) reduction to the vector Helmholtz equation. We exploit a suitable coordinate transformation and, successively, we use the waveguide modes as a basis for the HiMod expansion. We show that accurate results can be obtained with an impressive speed-up factor when compared with standard commercial codes based on a three-dimensional finite element discretization.

math.NA↗

arXiv2022

Conformal Metasurfaces for Recovering Dynamic Blockage in Vehicular Systems

Intelligent reflecting surfaces (IRS) will represent a key technology in the upcoming sixth-generation (6G) communication networks to extend the network coverage and overcome link blockage. Research on IRS is expected to take a giant leap in the coming years to address the current technological limitations, mainly regarding the IRS re-configuration in highly dynamic scenarios, such as vehicle-to-vehicle (V2V) ones. This paper proposes a fully passive and low-cost solution based on pre-configured IRS to be lodged on the vehicle's body, which does not require any signaling for re-configuration. However, conventional IRS are planar array and cannot fit with most vehicles' silhouettes. Hence, the proposed design targets conformal surfaces (C-IRS) with an arbitrary shape. In particular, this paper reveals the first experimental findings on the realization of C-IRS operating at 26 GHz and measurements in anechoic chamber, which validate the analytical derivations. To demonstrate the benefits of the proposed solution, numerical simulations in a V2V scenario show that, when the percentage of vehicles equipping a C-IRS increases, the communication becomes more robust to vehicles' blockage and the average end-to-end SNR is enhanced up to 25 dB.

eess.SP↗

arXiv2022

Conformal Metasurfaces: a Novel Solution for Vehicular Communications

In future 6G millimeter wave (mmWave)/sub-THz vehicle-to-everything (V2X) communication systems, vehicles are expected to be equipped with massive antenna arrays to realize beam-based links capable of compensating for the severe path loss. However, vehicle-to-vehicle (V2V) direct links are prone to be blocked by surrounding vehicles. Emerging metasurface technologies enable the control of the electromagnetic wave reflection towards the desired direction, enriching the channel scattering to boost communication performance. Reconfigurable intelligent surfaces (RIS), and mostly the pre-configured counterpart intelligent reflecting surfaces (IRS), are a promising low-cost relaying system for 6G. This paper proposes using conformal metasurfaces (either C-RIS or C-IRS) deployed on vehicles' body to mitigate the blockage impact in a highway multi-lane scenario. In particular, conformal metasurfaces create artificial reflections to mitigate blockage by compensating for the non-flat shape of the vehicle's body, such as the lateral doors, with proper phase patterns. We analytically derive the phase pattern to apply to a cylindrical C-RIS/C-IRS approximating the shape of the car body, as a function of both incidence and reflection angles, considering cylindrical RIS/IRS as a generalization of conventional planar ones. We propose a novel design for optimally pre-configured C-IRS to mimic the behavior of an EM flat surface on car doors, proving the benefits of C-RIS and C-IRS in a multi-lane V2V highway scenario. The results show a consistent reduction of blockage probability when exploiting C-RIS/C-IRS, 20% for pre-configured C-IRS, and 70% for C-RIS, as well as a remarkable improvement in terms of average signal-to-noise ratio, respectively 10-20 dB for C-IRS and 30-40 dB for C-RIS.

eess.SP↗

arXiv2021

Electromagnetic Models for Passive Detection and Localization of Multiple Bodies

The paper proposes a multi-body electromagnetic (EM) model for the quantitative evaluation of the influence of multiple human bodies in the surroundings of a radio link. Modeling of human-induced fading is the key element for the development of real-time Device-Free (or passive) Localization (DFL) and body occupancy tracking systems based on the processing of the Received Signal Strength (RSS) data recorded by radio-frequency devices. The proposed physical-statistical model, is able to relate the RSS measurements to the position, size, orientation, and random movements of people located in the link area. This novel EM model is thus instrumental for crowd sensing, occupancy estimation and people counting applications for indoor and outdoor scenarios. The paper presents the complete framework for the generic N-body scenario where the proposed EM model is based on the knife-edge approach that is generalized here for multiple targets. The EM-equivalent size of each target is then optimized to reproduce the body-induced alterations of the free space radio propagation. The predicted results are then compared against the full EM simulations obtained with a commercially available simulator. Finally, experiments are carried out to confirm the validity the proposed model using IEEE 802.15.4-compliant industrial radio devices.

eess.SP↗

arXiv2019

Towards Topological Protection based millimetre wave devices

Feasibility of Topological Metawaveguides supporting helical propagation in the microwave range has been recently proven. The advantages of unidirectional propagation supported by such waveguides however can only be exploited in real devices if topological modes are endowed with the capability to interact within themselves as well as with trivial modes. Here we show a modal launcher to interface a topological metawaveguide with conventional circular waveguides with negligible reflection and we exploit the properties of coupled topological modes to show a proof of concept of a topological contra-directional coupler.

physics.app-ph↗