arXiv subjects

Giang D. Nguyen

Publications and source records attributed to Giang D. Nguyen.

8 recordsLinked to original sources

arXiv2021

A hybrid discrete-continuum approach to model hydro-mechanical behaviour of soil during desiccation

Desiccation cracking in clayey soils occurs when they lose moisture, leading to an increase in their compressibility and hydraulic conductivity and hence significant reduction of soil strength. The prediction of desiccation cracking in soils is challenging due to the lack of insights into the complex coupled hydro-mechanical process at the grain scale. In this paper, a new hybrid discrete-continuum numerical framework, capable of capturing hydro-mechanical behaviour of soil at both grain and macro scales, is proposed for predicting desiccation cracking in clayey soil. In this framework, a soil layer is represented by an assembly of DEM particles, each occupies an equivalent continuum space and carries physical properties governing unsaturated flow. These particles move freely in the computational space following the discrete element method (DEM), while their contact network and the continuum mixture theory are used to model the unsaturated flow. The dependence of particle-to-particle contact behaviour on water content is represented by a cohesive-frictional contact model, whose material properties are governed by the water content. In parallel with the theoretical development is a series of experiments on 3D soil desiccation cracking to determine essential properties and provide data for the validation of mechanical and physical behaviour. Very good agreement in both physical behaviour (e.g. evolution of water content) and mechanical behaviour (e.g. occurrence and development of cracks, and distribution of compressive and tensile strains) demonstrates that the proposed framework is capable of capturing the hydro-mechanical behaviour of soil during desiccation. The capability of the proposed framework facilitates numerical experiments for insights into the hydro-mechanical behaviour of unsaturated soils that have not been possible before.

physics.geo-ph↗

arXiv2020

Interlayer magnetism in Fe3-xGeTe2

Fe$_{3-x}$GeTe$_2$ is a layered van der Waals magnetic material with a relatively high ordering temperature and large anisotropy. While most studies have concluded the interlayer ordering to be ferromagnetic, there have also been reports of interlayer antiferromagnetism in Fe$_{3-x}$GeTe$_2$. Here, we investigate the interlayer magnetic ordering by neutron diffraction experiments, scanning tunneling microscopy (STM) and spin-polarized STM measurements, density functional theory plus U calculations and STM simulations. We conclude that the layers of Fe$_{3-x}$GeTe$_2$ are coupled ferromagnetically and that in order to capture the magnetic and electronic properties of Fe$_{3-x}$GeTe$_2$ within density functional theory, Hubbard U corrections need to be taken into account.

cond-mat.mtrl-sci↗

arXiv2020

Emerging edge states on the surface of the epitaxial semimetal CuMnAs thin film

Epitaxial thin films of CuMnAs have recently attracted attention due to their potential to host relativistic antiferromagnetic spintronics and exotic topological physics. Here we report on the structural and electronic properties of a tetragonal CuMnAs thin film studied using scanning tunneling microscopy (STM) and density functional theory (DFT). STM reveals a surface terminated by As atoms, with the expected semi-metallic behavior. An unexpected zigzag step edge surface reconstruction is observed with emerging electronic states below the Fermi energy. DFT calculations indicate that the step edge reconstruction can be attributed to an As deficiency that results in changes in the density of states of the remaining As atoms at the step edge. This understanding of the surface structure and step edges on the CuMnAs thin film will enable in-depth studies of its topological properties and magnetism.

cond-mat.mes-hall↗

arXiv2019

Local Superconductivity in Vanadium Iron Arsenide

We investigate the chemical substitution of group 5 into BaFe2As2 (122) iron arsenide, in the effort to understand why Fe-site hole doping of this compound (e.g., using group 5 or 6) does not yield bulk superconductivity. We find an increase in c-lattice parameter of the BaFe2As2 with the substitution of V, Nb, or Ta; the reduction in c predicts the lack of bulk superconductivity [1] that is confirmed here through transport and magnetization results. However, our spectroscopy measurements find a coexistence of antiferromagnetic and local superconducting nanoscale regions in V-122, observed for the first time in a transition-metal hole-doped iron arsenide. In BaFe2As2, there is a complex connection between local parameters such as composition and lattice strain, average lattice details, and the emergence of bulk quantum states such as superconductivity and magnetism. [1] L. M. N. Konzen, and A. S. Sefat, J. Phys.: Condens. Matter 29 (2017), 083001.

cond-mat.supr-con↗

arXiv2019

Atomic-scale manipulation and in situ characterization with scanning tunneling microscopy

Scanning tunneling microscope (STM) has presented a revolutionary methodology to the nanoscience and nanotechnology. It enables imaging the topography of surfaces, mapping the distribution of electronic density of states, and manipulating individual atoms and molecules, all at the atomic resolution. In particular, the atom manipulation capability has evolved from fabricating individual nanostructures towards the scalable production of the atomic-sized devices bottom-up. The combination of precision synthesis and in situ characterization of the atomically precise structures has enabled direct visualization of many quantum phenomena and fast proof-of-principle testing of quantum device functions with real-time feedback to guide the improved synthesis. In this article, several representative examples are reviewed to demonstrate the recent development of atomic scale manipulation. Especially, the review focuses on the progress that address the quantum properties by design through the precise control of the atomic structures in several technologically relevant materials systems. Besides conventional STM manipulations and electronic structure characterization with single-probe STM, integration of multiple atomically precisely controlled probes in a multiprobe STM system vastly extends the capability of in situ characterization to a new dimension where the charge and spin transport behaviors can be examined from mesoscopic to atomic length scale. The automation of the atomic scale manipulation and the integration with the well-established lithographic processes would further push this bottom-up approach to a new level that combines reproducible fabrication, extraordinary programmability, and the ability to produce large-scale arrays of quantum structures.

cond-mat.mes-hall↗

arXiv2014

A Conceptual Approach to Two-Scale Constitutive Modelling For Hydro-Mechanical Coupling

Large scale modelling of fluid flow coupled with solid failure in geothermal reservoirs or hydrocarbon extraction from reservoir rocks usually involves behaviours at two scales: lower scale of the inelastic localization zone, and larger scale of the bulk continuum where elastic behaviour can be reasonably assumed. The hydraulic conductivities corresponding to the mechanical properties at these two scales are different. In the bulk elastic host rock, the hydraulic conductivity does not vary much with the deformation, while it significantly changes in the lower scale of the localization zone due to inelastic deformation. Increase of permeability due to fracture and/or dilation, or reduction of permeability due to material compaction can take place inside this zone. The challenge is to predict the evolution of hydraulic conductivities coupled with the mechanical behaviour of the material in all stages of the deformation process. In the early stage of diffuse deformation, the permeability of the material can be reasonably assumed to be homogenous over the whole Representative Volume Element (RVE) However, localized failure results in distinctly different conductivities in different parts of the RVE. This paper establishes a general framework and corresponding field equations to describe the hydro-mechanical coupling in both diffuse and localized stages of deformation in rocks. In particular, embedding the lower scale hydro-mechanical behaviour of the localization zone inside an elastic bulk, together with their corresponding effective sizes, helps effectively deal with scaling issues in large-scale modelling. Preliminary results are presented which demonstrate the promising features of this new approach.

cond-mat.soft↗

arXiv2014

A multiphase constitutive modeling framework for unsaturated soil behavior

We develop a framework for constitutive modeling of unsaturated soils that has the embedded elements of lower scale grain to grain contacts. Continuum models developed from this framework will possess two different phases idealizing the solid grains and their interactions. As a consequence, two different constitutive relationships, corresponding to the grain to grain contact and bulk behavior, co-exist in a constitutive model and govern the response of the model. To be specific, grain to grain sliding under dry or wet condition is idealized and appears as a simple contact law embedded in a continuum framework. There is no need to define plastic strain, as this quantity naturally emerges at the continuum scale as the consequence of frictional sliding at the lower scale. In addition, the effective stress can be naturally worked out from the grain to grain contact law embedded in the model without being subjected to any interpretation. This, in our opinion, is a closer representation of unsaturated soil behavior, compared to existing continuum approaches that map everything onto a single stress-strain relationship. In this paper, the framework is presented in its simplest form that takes into account sliding on a single orientation. Grain to grain contact law with capillary effects is used for the demonstration of the concept, and the technical details behind it. Generalization of the framework for better representation of unsaturated soil behavior will also be sketched out.

cond-mat.soft↗

arXiv2013

Intermolecular interactions and substrate effects for an adamantane monolayer on the Au(111) surface

We study theoretically and experimentally the infrared (IR) spectrum of an adamantane monolayer on a Au(111) surface. Using a new STM-based IR spectroscopy technique (IRSTM) we are able to measure both the nanoscale structure of an adamantane monolayer on Au(111) as well as its infrared spectrum, while DFT-based ab initio calculations allow us to interpret the microscopic vibrational dynamics revealed by our measurements. We find that the IR spectrum of an adamantane monolayer on Au(111) is substantially modified with respect to the gas-phase IR spectrum. The first modification is caused by the adamantane--adamantane interaction due to monolayer packing and it reduces the IR intensity of the 2912 cm$^{-1}$ peak (gas phase) by a factor of 3.5. The second modification originates from the adamantane--gold interaction and it increases the IR intensity of the 2938 cm$^{-1}$ peak (gas phase) by a factor of 2.6, and reduces its frequency by 276 cm$^{-1}$. We expect that the techniques described here can be used for an independent estimate of substrate effects and intermolecular interactions in other diamondoid molecules, and for other metallic substrates.

cond-mat.mes-hall↗