arXiv subjects

Gianluca Cusatis

Publications and source records attributed to Gianluca Cusatis.

28 records · Page 2Linked to original sources

arXiv2016

Discontinuous Cell Method (DCM) for the Simulation of Cohesive Fracture and Fragmentation of Continuous Media

In this paper, the Discontinuous Cell Method (DCM) is formulated with the objective of simulating cohesive fracture propagation and fragmentation in homogeneous solids without issues relevant to excessive mesh deformation typical of available Finite Element formulations. DCM discretizes solids by using the Delaunay triangulation and its associated Voronoi tessellation giving rise to a system of discrete cells interacting through shared facets. For each Voronoi cell, the displacement field is approximated on the basis of rigid body kinematics, which is used to compute a strain vector at the centroid of the Voronoi facets. Such strain vector is demonstrated to be the projection of the strain tensor at that location. At the same point stress tractions are computed through vectorial constitutive equations derived on the basis of classical continuum tensorial theories. Results of analysis of a cantilever beam are used to perform convergence studies and comparison with classical finite element formulations in the elastic regime. Furthermore, cohesive fracture and fragmentation of homogeneous solids are studied under quasi-static and dynamic loading conditions. The mesh dependency problem, typically encountered upon adopting softening constitutive equations, is tackled through the crack band approach. This study demonstrates the capabilities of DCM by solving multiple benchmark problems relevant to cohesive crack propagation. The simulations show that DCM can handle effectively a wide range of problems from the simulation of a single propagating fracture to crack branching and fragmentation.

math.NA↗

arXiv2016

Isogeometric implementation of high order microplane model for the simulation of high order elasticity, softening, and localization

In this paper, a recently developed Higher Order Microplane (HOM) model for softening and localization, is implemented within a isogeometric finite element framework. The HOM model was derived directly from a three dimensional discrete particle model and it was shown to be associated with a high order continuum characterized by independent rotation and displacement fields. Furthermore, the HOM model possesses two characteristic lengths: the first associated with the spacing of flaws in the material internal structure and related to the gradient character of the continuum; and the second associated with the size of these flaws and related to the micro-polar character of the continuum. The displacement-based finite element implementation of this type of continua requires $C^1$ continuity both within the elements and at the element boundaries. This motivated the implementation of the concept of isogeometric analysis which ensures a higher degree of smoothness and continuity. NURBS based isogeometric elements were implemented in a 3D setting, with both displacement and rotational degrees of freedom at each control point. The performed numerical analyses demonstrate the effectiveness of the proposed HOM model implementation to ensure optimal convergence in both elastic and softening regime. Furthermore, the proposed approach allows the natural formulation of a localization limiter able to prevent strain localization and spurious mesh sensitivity known to be pathological issues for typical local strain-softening constitutive equations.

cond-mat.mtrl-sci↗

arXiv2016

A multiscale framework for the simulation of the anisotropic mechanical behavior of shale

Shale, like many other sedimentary rocks, is typically heterogeneous, anisotropic, and is characterized by partial alignment of anisotropic clay minerals and naturally formed bedding planes. In this study, a micromechanical framework based on the Lattice Discrete Particle Model (LDPM) is formulated to capture these features. Material anisotropy is introduced through an approximated geometric description of shale internal structure, which includes representation of material property variation with orientation and explicit modeling of parallel lamination. The model is calibrated by carrying out numerical simulations to match various experimental data, including the ones relevant to elastic properties, Brazilian tensile strength, and unconfined compressive strength. Furthermore, parametric study is performed to investigate the relationship between the mesoscale parameters and the macroscopic properties. It is shown that the dependence of the elastic stiffness, strength, and failure mode on loading orientation can be captured successfully. Finally, a homogenization approach based on the asymptotic expansion of field variables is applied to upscale the proposed micromechanical model, and the properties of the homogenized model are analyzed.

cond-mat.mtrl-sci↗

arXiv2016

Elastic Microplane Formulation for Transversely Isotropic Materials

This contribution investigates the extension of the microplane formulation to the description of transversely isotropic materials such as shale rock, foams, unidirectional composites, and ceramics. Two possible approaches are considered: 1) the spectral decomposition of the stiffness tensor to define the microplane constitutive laws in terms of energetically orthogonal eigenstrains and eigenstresses; and 2) the definition of orientation-dependent microplane elastic moduli. It is shown that the first approach provides a rigorous way to tackle anisotropy within the microplane framework whereas the second approach represents an approximation which, however, makes the formulation of nonlinear constitutive equations much simpler. The efficacy of the second approach in modeling the macroscopic elastic behavior is compared to the thermodynamic restrictions of the anisotropic parameters showing that a significant range of elastic properties can be modeled with excellent accuracy. Further, it is shown that it provides a very good approximation of the microplane stresses provided by the first approach, with the advantage of a simpler formulation. It is concluded that the spectral stiffness decomposition represents the best approach in such cases as for modeling unidirectional composites, in which accurately capturing the elastic behavior is important. The introduction of orientation-dependent microplane elastic moduli provides a simpler framework for the modeling of transversely isotropic materials with remarked inelastic behavior, as in the case, for example, of shale rock.

cond-mat.mtrl-sci↗

arXiv2016

A Novel Material for In Situ Construction on Mars: Experiments and Numerical Simulations

A significant step in space exploration during the 21st century will be human settlement on Mars. Instead of transporting all the construction materials from Earth to the red planet with incredibly high cost, using Martian soil to construct a site on Mars is a superior choice. Knowing that Mars has long been considered a "sulfur-rich planet", a new construction material composed of simulated Martian soil and molten sulfur is developed. In addition to the raw material availability for producing sulfur concrete and a strength reaching similar or higher levels of conventional cementitious concrete, fast curing, low temperature sustainability, acid and salt environment resistance, 100% recyclability are appealing superior characteristics of the developed Martian Concrete. In this study, different percentages of sulfur are investigated to obtain the optimal mixing proportions. Three point bending, unconfined compression and splitting tests were conducted to determine strength development, strength variability, and failure mechanisms. The test results show that the strength of Martian Concrete doubles that of sulfur concrete utilizing regular sand. It is also shown that the particle size distribution plays an important role in the mixture's final strength. Furthermore, since Martian soil is metal rich, sulfates and, potentially, polysulfates are also formed during high temperature mixing, which might contribute to the high strength. The optimal mix developed as Martian Concrete has an unconfined compressive strength of above 50 MPa. The formulated Martian Concrete is simulated by the Lattice Discrete Particle Model (LDPM), which exhibits excellent ability in modeling the material response under various loading conditions.

cond-mat.mtrl-sci↗

arXiv2016

Direct Testing of Gradual PostPeak Softening of Notched Specimens of Fiber Composites Stabilized by Enhanced Stiffness and Mass

Static and dynamic analysis of the fracture tests of fiber composites in hydraulically servo-controlled testing machines currently in use shows that their grips are much too soft and light for observing the postpeak softening. Based on static and dynamic analysis of the test setup, far stiffer and heavier grips are proposed. Tests of compact-tension fracture specimens of woven carbon-epoxy laminates prove this theoretical conclusion. Sufficiently stiff grips allow observation of a stable postpeak, even under load-point displacement control. Dynamic stability analysis further indicates that stable postpeak can be observed under CMOD control provided that a large mass is rigidly attached to the current soft grips. The fracture energy deduced from the area under the measured complete load-deflection curve with stable postpeak agrees closely with the fracture energy deduced from the size effect tests of the same composite. Previous suspicions of dynamic snapback in the testing of composites are dispelled. So is the previous view that fracture mechanics was inapplicable to the fiber-polymer composites.

cond-mat.mtrl-sci↗

arXiv2016

Lattice Discrete Particle Model (LDPM) for pressure-dependent inelasticity in granular rocks

This paper deals with the formulation, calibration, and validation of a Lattice Discrete Particle Model (LDPM) for the simulation of the pressure-dependent inelastic response of granular rocks. LDPM is formulated in the framework of discrete mechanics and it simulates the heterogeneous deformation of cemented granular systems by means of discrete compatibility/equilibrium equations defined at the grain scale. A numerical strategy is proposed to generate a realistic microstructure based on the actual grain size distribution of a sandstone and the capabilities of the method are illustrated with reference to the particular case of Bleurswiller sandstone, i.e. a granular rock that has been extensively studied at the laboratory scale. LDPM micromechanical parameters are calibrated based on evidences from triaxial experiments, such as hydrostatic compression, brittle failure at low confinement and plastic behavior at high confinement. Results show that LDPM allows exploring the effect of fine-scale heterogeneity on the inelastic response of rock cores, achieving excellent quantitative performance across a wide range of stress conditions. In addition, LDPM simulations demonstrate its capability of capturing different modes of strain localization within a unified mechanical framework, which makes this approach applicable for a wide variety of geomechanical settings. Such promising performance suggests that LDPM may constitute a viable alternative to existing discrete numerical methods for granular rocks, as well as a versatile tool for the interpretation of their complex deformation/failure patterns and for the development of continuum models capturing the effect of micro-scale heterogeneity.

cond-mat.mtrl-sci↗

arXiv2016

Experimental and Numerical Investigation of Intra-Laminar Energy Dissipation and Size Effect in Two-Dimensional Textile Composites

Design of large composite structures requires understanding the scaling of their mechanical properties, an aspect often overlooked in the literature on composites. This contribution analyzes, experimentally and numerically, the intra-laminar size effect of textile composite structures. Test results of geometrically similar Single Edge Notched specimens made of 8 layers of 0 degree epoxy/carbon twill 2 by 2 laminates are reported. Results show that the nominal strength decreases with increasing specimen size and that the experimental data can be fitted well by Bazant's size effect law, allowing an accurate identification of the intra-laminar fracture energy of the material. The importance of an accurate estimation of Gf in situations where intra-laminar fracturing is the main energy dissipation mechanism is clarified by studying numerically its effect on crashworthiness of composite tubes. Simulations demonstrate that, for the analyzed geometry, a decrease of the fracture energy to 50% of the measured value corresponds to an almost 42% decrease in plateau crushing load. Further, assuming a vertical stress drop after the peak, a typical assumption of strength-based constitutive laws implemented in most commercial Finite Element codes, results in an strength underestimation of the order of 70%. The main conclusion of this study is that measuring accurately fracture energy and modeling correctly the fracturing behavior of textile composites, including their quasi-brittleness, is key. This can be accomplished neither by strength- or strain-based approaches, which neglect size effect, nor by LEFM which does not account for the finiteness of the Fracture Process Zone.

cond-mat.mtrl-sci↗

arXiv2015

Asymptotic Expansion Homogenization of Discrete Fine-Scale Models with Rotational Degrees of Freedom for the Simulation of Quasi-Brittle Materials

Discrete fine-scale models, in the form of either particle or lattice models, have been formulated successfully to simulate the behavior of quasi-brittle materials whose mechanical behavior is inherently connected to fracture processes occurring in the internal heterogeneous structure. These models tend to be intensive from the computational point of view as they adopt an a priori discretization anchored to the major material heterogeneities (e.g. grains in particulate materials and aggregate pieces in cementitious composites) and this hampers their use in the numerical simulations of large systems. In this work, this problem is addressed by formulating a general multiple scale computational framework based on classical asymptotic analysis and that (1) is applicable to any discrete model with rotational degrees of freedom; and (2) gives rise to an equivalent Cosserat continuum. The developed theory is applied to the upscaling of the Lattice Discrete Particle Model (LDPM), a recently formulated discrete model for concrete and other quasi-brittle materials, and the properties of the homogenized model are analyzed thoroughly in both the elastic and inelastic regime. The analysis shows that the homogenized micropolar elastic properties are size-dependent, and they are functions of the RVE size and the size of the material heterogeneity. Furthermore, the analysis of the homogenized inelastic behavior highlights issues associated with the homogenization of fine-scale models featuring strain-softening and the related damage localization. Finally, nonlinear simulations of the RVE behavior subject to curvature components causing bending and torsional effects demonstrates, contrarily to typical Cosserat formulations, a significant coupling between the homogenized stress-strain and couple-curvature constitutive equations.

cond-mat.mtrl-sci↗

arXiv2015

Spectral Stiffness Microplane Model for Quasibrittle Textile Composites

The present contribution proposes a general constitutive model to simulate the orthotropic stiffness, pre-peak nonlinearity, failure envelopes, and the post-peak softening and fracture of textile composites. Following the microplane model framework, the constitutive laws are formulated in terms of stress and strain vectors acting on planes of several orientations within the material meso-structure. The model exploits the spectral decomposition of the orthotropic stiffness tensor to define orthogonal strain modes at the microplane level. These are associated to the various constituents at the mesoscale and to the material response to different types of deformation. Strain-dependent constitutive equations are used to relate the microplane eigenstresses and eigenstrains while a variational principle is applied to relate the microplane stresses at the mesoscale to the continuum tensor at the macroscale. Thanks to these features, the resulting spectral stiffness microplane formulation can easily capture various physical inelastic phenomena typical of fiber and textile composites such as: matrix microcracking, micro-delamination, crack bridging, pullout, and debonding. The application of the model to a twill 2$\times$2 shows that it can realistically predict its uniaxial as well as multi-axial behavior. Furthermore, the model shows excellent agreement with experiments on the axial crushing of composite tubes, this capability making it a valuable design tool for crashworthiness applications. The formulation is computationally efficient, easy to calibrate and adaptable to other kinds of composite architectures of great current interest such as 2D and 3D braids or 3D woven textiles.

cond-mat.mtrl-sci↗