arXiv subjects

Gianluigi Silvestre

Publications and source records attributed to Gianluigi Silvestre.

6 recordsLinked to original sources

arXiv2026

Design and Performance of the Upgraded Prototype Schwarzschild-Couder Telescope Camera Module

The Cherenkov Telescope Array Observatory (CTAO) is a ground-based observatory that will improve upon the sensitivities of the current generation of very-high-energy gamma-ray instruments. The Schwarzschild-Couder Telescope (SCT) is a dual-mirror candidate design for a CTAO Medium-Sized Telescope (MST). The prototype Schwarzschild-Couder Telescope (pSCT) was inaugurated in 2019 at Fred Lawrence Whipple Observatory (FLWO) in Arizona and observed significant gamma-ray emission from the Crab Nebula with a partially populated camera. The pSCT camera is currently being upgraded to fully instrument the focal plane with 11,328 silicon photomultiplier (SiPM) pixels split between 177 camera modules. Additionally, the modules will feature upgraded electronics designed to reduce electronics crosstalk and noise. A module calibration procedure has been developed using a preproduction test module. Following this calibration procedure, performance testing shows that the upgrade module has low noise, minimal electronics crosstalk, and excellent charge resolution. After calibration and optimization, the 177 production modules will be installed in the pSCT camera for commissioning. This will be followed by observations of known VHE gamma-ray sources for camera performance validation.

astro-ph.IM↗

arXiv2026

Measurement of 80-200 MeV/n $^{16}$O nuclear cross-section on Carbon and Polyethylene targets with the nuclear emulsion detector of the FOOT experiment

Accurate knowledge of nuclear fragmentation cross-sections is essential for optimizing charged particle therapy. In this study, conducted within the framework of the FOOT (FragmentatiOn Of Target) experiment, we present the first measurements with a large angular acceptance of total charge-changing cross-section and the cross-section for the production of fragments (production cross-section) for $^{16}$O ions interacting with Carbon (C) and Polyethylene (C$_2$H$_4$) targets in the kinetic energy range of 80 to 200 MeV/nucleon. Measurements were performed using the Emulsion Cloud Chamber (ECC) technique, which combines high spatial resolution and angular acceptance, up to 45$^\circ$. The results are compared with Monte Carlo model predictions. Moreover, the total charge-changing and fragment production cross-sections for $^{16}$O on Hydrogen in the same energy range are derived.

nucl-ex↗

arXiv2026

A Telescope System for Charge and Position Measurement of High Energy Nuclei

A high-granularity telescope system with a large sensitive area and low material budget has been developed for high-energy heavy ion beam tests. The telescope consists of nine layers of silicon microstrip detectors (SSDs), whose performance was validated through a heavy ion beam test at the CERN SPS. A hybrid machine learning algorithm is proposed to address the challenges of nuclear charge measurement with SSDs. The system achieves a spatial resolution of $\mathcal{O}(1) \,$\SI{}{\micro\metre} and a charge resolution better than 0.16 charge units for nuclei from $Z = 1$ to $Z = 29$, with a sensitive area of $8 \times 8 \, \mathrm{cm}^2$. To the best of our knowledge, this represents the most precise charge and spatial resolution simultaneously achieved by a silicon telescope to date.

physics.ins-det↗

arXiv2026

Beam Test Characterization of Silicon Microstrip Detector Flight-Model Ladders for the AMS-02 Upgrade

The AMS-02 experiment plans to install a new silicon microstrip tracker layer (Layer-0) on top of the existing detector, increasing the cosmic-ray acceptance by a factor of 3. Layer-0 employs a design in which multiple silicon microstrip detectors (SSDs) are connected in series to form long detector ladders. We present a detailed performance study of the flight-model ladders using a 350~GeV mixed hadron beam at the CERN SPS. The study focuses on the following aspects: (i) the performance of ladders with different numbers of SSDs, for which the intrinsic spatial resolution at normal incidence varies from $9.5~μ\mathrm{m}$ to $11.4~μ\mathrm{m}$ for ladders composed of 8 to 12 SSDs; (ii) the response consistency for particles impacting on the \emph{Head} and \emph{Tail} regions of the ladder; and (iii) the dependence of the detector performance on the particle incidence angle.

physics.ins-det↗

arXiv2025

A Silicon Microstrip Detector for Power-Limited and Large Sensitive Area Applications

A silicon microstrip detector (SSD) has been developed to have state of the art spatial resolution and a large sensitive area under stringent power constraints. The design incorporates three floating strips with their bias resistors inserted between two aluminum readout strips. Beam test measurements with the single sensor confirmed that this configuration achieves a total detection efficiency of $99.8 \, \%$ and spatial resolution $7.6 \, \mathrm{μm}$ for MIPs. A double-$η$ algorithm was developed to optimize hit position reconstruction for this SSD. The design can be adapted for large area silicon detectors.

physics.ins-det↗

arXiv2020

The FragmentatiOn Of Target Experiment (FOOT) and its DAQ system

The FragmentatiOn Of Target (FOOT) experiment aims to provide precise nuclear cross-section measurements for two different fields: hadrontherapy and radio-protection in space. The main reason is the important role the nuclear fragmentation process plays in both fields, where the health risks caused by radiation are very similar and mainly attributable to the fragmentation process. The FOOT experiment has been developed in such a way that the experimental setup is easily movable and fits the space limitations of the experimental and treatment rooms available in hadrontherapy treatment centers, where most of the data takings are carried out. The Trigger and Data Acquisition system needs to follow the same criteria and it should work in different laboratories and in different conditions. It has been designed to acquire the largest sample size with high accuracy in a controlled and online-monitored environment. The data collected are processed in real-time for quality assessment and are available to the DAQ crew and detector experts during data taking.

physics.ins-det↗