arXiv subjects

Gilson Carneiro

Publications and source records attributed to Gilson Carneiro.

14 recordsLinked to original sources

arXiv2009

Force between a magnetic tip and an inhomogeneous superconductor at zero field

The force exerted by a semi-infinite inhomogeneous superconductor with a planar interface to vacuum on a magnetic tip is studied theoretically in the absence of external magnetic fields. It is shown that the force has a contribution from inhomogeneities due to material defects with unique characteristics. Defects are taken into account in the London limit by allowing the mass parameter to vary spatially. The contribution from defects to the force is calculated analytically to first order in the deviation of the mass parameter from its constant value for the homogeneous superconductor, assuming that the tip is a point dipole perpendicular to the interface, and that it does not spontaneously create vortex matter. Random point defects and linear localized defects are considered phenomenologically. For each defect type the force dependence on the dipole position coordinates is obtained, and the force magnitudes are estimated numerically. The predictions for the dependence of the linear defect force on the dipole lateral position are found to agree qualitatively with experiment.

cond-mat.supr-con↗

arXiv2008

Moving vortex matter with coexisting vortices and anti-vortices

Moving vortex matter, driven by transport currents independent of time, in which vortices and anti-vortices coexist is investigated theoretically in thin superconducting films with nanostructured defects. A simple London model is proposed for the vortex dynamics in films with periodic arrays of nanomagnets or cylindrical holes (antidots). Common to these films is that vortex anti-vortex pairs may be created in the vicinity of the defects by relatively small transport currents, because it adds to the current generated by the defects - the nanomagnets screening current, or the antidots backflow current - and may exceed locally the critical value for vortex anti-vortex pair creation. The model assumes that vortex matter dynamics is governed by Langevin equations, modified to account for creation and annihilation of vortex anti-vortex pairs. For pair creation, it is assumed that whenever the total current at some location exceeds a critical value, equal to that needed to separate a vortex from an anti-vortex by a vortex core diameter, a pair is created instantaneously around this location. Pair annihilation occurs by vortex anti-vortex collisions. The model is applied to films at zero external magnetic field and low temperatures. It is found that several moving vortex matter steady-states with equal numbers of vortices and anti-vortices are possible.

cond-mat.supr-con↗

arXiv2006

Tunable pinning of a superconducting vortex a by a magnetic vortex

The interaction between a straight vortex line in a superconducting film and a soft magnetic nanodisk in the magnetic vortex state in the presence of a magnetic field applied parallel to the film surfaces is studied theoretically. The superconductor is described by London theory and the nanodisk by the Landau-Lifshitz continuum theory of magnetism, using the approximation known as the rigid vortex model. Pinning of the vortex line by the nanodisk is found to result, predominantly, from the interaction between the vortex line and the changes in the nanodisk magnetization induced by the magnetic field of the vortex line and applied field. In the context of the rigid vortex model, these changes result from the displacement of the magnetic vortex. This displacement is calculated analytically by minimizing the energy, and the pinning potential is obtained. The applied field can tune the pinning potential by controlling the displacement of the magnetic vortex. The nanodisk magnetization curve is predicted to change in the presence of the vortex line

cond-mat.supr-con↗

arXiv2005

Tunable interactions between vortices and a magnetic dipole

The interactions between vortices in a thin superconducting film and one magnetic dipole in the presence of a magnetic field applied parallel to the film surfaces are studied theoretically in the London limit. The dipole magnetic moment is assumed to have constant magnitude and freedom to rotate. The pinning potential for an arbitrary vortex configuration is calculated exactly. It is found that, due to the dipole freedom to rotate, the pinning potential differs significantly from that for a permanent dipole. In particular, its dependence on the applied field is non-trivial and allows for tuning of the pinning potential by the applied field. The critical current for one vortex pinned by the dipole is obtained numerically as a function of the applied field and found to depend strongly on the field. Order of magnitude changes in the critical current resulting from changes in the direction and magnitude of the applied field are reported, with discontinuous changes taking place in some cases. The effect of vortex pinning by random material defects on the critical current is investigated using a simple model. It is found that if random pinning is weak the critical current remains strongly dependent on the applied field. Possible applications to vortices pinned by arrays of magnetic dots are briefly considered.

cond-mat.supr-con↗

arXiv2005

Tunable ratchet effects for vortices pinned by periodic magnetic dipole arrays

The ratchet effect is demonstrated theoretically for the simple model of a vortex in a thin superconducting film interacting with a periodic array of magnetic dipoles placed in the vicinity of the film . The pinning potential for the vortex is calculated in the London limit and found to break spatial inversion symmetry and to depend on the orientation of the magnetic dipole moments. The motion of the vortex at zero temperature driven by a force oscillating periodically in time is investigated numerically. Drift vortex motion consisting of displacements by a translation vector of the dipole array during each period of oscillation is obtained and studied in detail. The direction of drift differs in general from that of the driving force, except if the driving force oscillates in a direction of high symmetry of the dipole array. The vortex drift velocity depends on the orientation of the magnetic moments, and can be tuned by rotating the dipoles. It is pointed out that if the magnetic moments are free to rotate, the ratchet effect can be produced and tuned by a magnetic field applied parallel to the film surfaces

cond-mat.supr-con↗

arXiv2005

Tunable critical current for a vortex pinned by a magnetic dipole

\\A simple model for a superconductor with tunable critical current is studied theoretically. The model consists of a thin superconducting film with one vortex interacting with one magnetic dipole, whose magnetic moment is free to rotate, in the presence of a magnetic field applied parallel to the film surfaces. The pinning potential for the vortex is calculated exactly in the London limit. It is found that, due to the dipole freedom to rotate, the dependence of the pinning potential on the applied field is non-trivial, and allows both the spatial dependence and strength of the pinning potential to be changed by the field. As a consequence, the critical current can be tuned by the applied field. The critical current is obtained numerically as a function of the applied field. Order of magnitude changes in the critical current resulting from changes in the direction and magnitude of the applied field are reported, with discontinuous changes taking place in some cases. Possible application to vortices in low-$T_c$ superconducting films pinned by arrays of magnetic dots are briefly considered. \\

cond-mat.supr-con↗

arXiv2003

Pinning and creation of vortices in superconducting films by a magnetic dipole

Interactions between vortices in planar superconducting films and a point magnetic dipole placed outside the film, and the creation of vortices by the dipole, are studied in the London limit. The exact solution of London equations for films of arbritrary thickness with a generic distribution of vortex lines, curved or straight, is obtained by generalizing the results reported by the author and E.H. Brandt (Phys. Rev. B {\bf 61}, 6370 (2000)) for films without the dipole. From this solution the total energy of the vortex-dipole system is obtained as a functional of the vortex distribution. The vortex configurations created by the dipole minimize the energy functional. It is shown that the vortex-dipole interaction energy is given by $- {\bf m}\cdot {\bf b^{vac}}$, where ${\bf m}$ is the dipole strength and $ {\bf b^{vac}}$ is the magnetic field of the vortices at the dipole position, and that it can also be written in terms of a magnetic pinning potential acting on the vortices. The properties of this potential are studied in detail. Vortex configurations created by the dipole on films of thickness comparable to the penetration depth are obtained by discretizing the exact London theory results on a cubic lattice and minimizing the energy functional using a numerical algorithm based on simulated annealing. These configurations are found to consist, in general, of curved vortex lines and vortex loops.

cond-mat.supr-con↗

arXiv2002

Dynamical Phase Diagrams for Moving Vortices Interacting with Periodic Pinning

The dynamical phase diagrams for vortices in clean films, driven by an uniform force, and interacting with periodic pinning resulting from a columnar-defect lattice are investigated by numerical simulations of a London model, and other considerations. Dynamical phases are identified according to the spatial symmetry, and dynamical phase diagrams are studied as a function of the driving force magnitude and direction, and on the temperature, for typical vortex densities.

cond-mat.supr-con↗

arXiv2002

A simple model for dynamical melting of moving vortex lattices interacting with periodic pinning

Melting of moving vortex lattices in clean superconducting films with periodic pinning is studied by a dynamical "cage" model, based on a mean-field treatment of Langevin's equations for the whole vortex lattice, assuming elastic flow. In the frame moving with the velocity of the vortex lattice center of mass, the model describes forced vibrations of a single vortex tied to a spring. The vortex displacements due to thermal fluctuations and to the periodic pinning force, and the relationship between the driving force and the vortex velocity (V-I curves) are obtained by a perturbation method, valid for high velocities and for both weak and strong periodic pinning. The dynamical melting temperature is calculated as a function of the vortex velocity using Lindemann's criterion. Application to a square defect lattice gives, for strong pinning, dynamical melting lines and anisotropic V-I curves that agree qualitatively with numerical results.

cond-mat.supr-con↗

arXiv2000

Dynamical Phases of Driven Vortices Interacting with Periodic Pinning

The finite temperature dynamical phases of vortices in films driven by a uniform force and interacting with the periodic pinning potential of a square lattice of columnar defects are investigated by Langevin dynamics simulations of a London model. Vortices driven along the [0,1] direction and at densities for which there are more vortices than columnar defects ($B>B_ϕ$) are considered. At low temperatures, two new dynamical phases, elastic flow and plastic flow, and a sharp transition between them are identified and characterized according to the behavior of the vortex spatial order, velocity distribution and frequency-dependent velocity correlation

cond-mat.supr-con↗

arXiv1999

Numerical Method for Zero-Temperature Vortex-Line Phase Diagrams

A numerical method to calculate equilibrium vortex-line configurations in bulk anisotropic type-II superconductors, at zero temperature, placed in an external magnetic field is introduced and applied to two physical problems. The method is designed to search for the minimum of the Gibbs free-energy in the London approximation and assumes only that the vortex lines are straight and arranged in a periodic lattice. Based on these assumptions a simulated annealing algorithm is developed to find the vortex-line-lattice unit cell shape, and vortex-line positions within it. This algorithm is made fast and accurate by the use of a rapidly converging series to calculate the lattice sums entering the vortex-vortex interaction energy. The method's accuracy is illustrated by calculating the magnetic induction versus applied field curve for an isotropic superconductor. The method is applied to a superconductor with a square lattice of columnar defects to study selected regions of the zero-temperature-phase diagram where vortex-line-lattices commensurate with the columnar defect lattice exist.

cond-mat.supr-con↗

arXiv1997

Resistivity of Doped Two-Leg Spin Ladders

In doped two-leg spin ladder systems, holes are expected to form charged bosonic pairs. We study charge transport in this system in the temperature range where the bosons can be described as weakly interacting quasi-particles. We consider boson-phonon and boson-impurity scattering processes. We suggest that due to the Ioffe-Regel resistivity saturation mechanism, the resistivity may exhibit a local maximum at intermediate temperatures. We propose that this may explain a similar feature found in recent experimental results.

cond-mat.str-el↗

arXiv1997

Quasi-Long-Range Order in the Calogero-Sutherland Model

The occurrence of quasi-long-range positional order in the ground-state of the one-dimensional repulsive Calogero-Sutherland model is studied. By mapping the exact ground-state into a one dimensional classical system of interacting particles at finite temperatures the structure function and the displacement correlation functions are calculated numerically using Monte Carlo simulation methods. These are found to exhibit quasi-long-range positional order for all values of the parameters. The exponent characterizing the algebraic decay of the displacement correlation functions with distance is estimated. It is argued that the ground-state of the repulsive Calogero-Sutherland model consists of a single normal phase with quasi-long-range positional order.

cond-mat.stat-mech↗

arXiv1997

Equilibrium vortex-line configurations and critical currents in thin films under a parallel field

Vortex-line equilibrium configurations and critical currents for type-II superconducting films at zero-temperature are studied theoretically. The films are assumed to be of thickness less than or equal to the penetration depth, free of pinning by imperfections, and to be subjected to a magnetic field parallel to the film surfaces and to a transport current perpendicular to the field. By numerical minimization of the exact London theory energy expression, using simulated annealing techniques, the equilibrium configurations are determined with great accuracy over a wide range of fields and currents. These consist of chains of straight vortex-lines whose number depends both on the field and on the current. Transitions involving a change by one in the chain number are found to take place either if the field is increased at zero transport current or if the transport current is increased at constant field. At the transitions, there is a considerable rearrangement in the vortex-line positions and a small, discontinuous, change in their number. The equilibrium configurations with chain numbers that are not too small form a nearly perfect triangular lattice, centered with respect to the film surfaces. However, small deviations from this arrangement are found to be important in determining the behavior near the transition and when the transport current approaches the critical current. It is found that the critical current has a a non-monotonic dependence on the field. The zero-temperature equilibrium phase diagram in the field-transport current plane is reported.

cond-mat.supr-con↗