arXiv subjects

Giorgio Pariani

Publications and source records attributed to Giorgio Pariani.

At least 19 recordsLinked to original sources

arXiv2026

CUBES: optical design and analysis of the VLT's high-resolution UV spectrograph past final design review

CUBES (Cassegrain U-Band Efficient Spectrograph) will be the most efficient UV spectrograph on an 8-10m class telescope, exploiting the ESO VLT's higher telescope efficiency relative to the ESO ELT in ground-based UV wavelengths. The instrument provides wavelength coverage over a range of 300-405nm, with high instrumental efficiency (>37%) and a resolving power of >20,000 (HR) and >6,000 (LR). It will be mounted on the Cassegrain focus of the VLT in Paranal. This paper presents the optical design of the system after the final design review. The optical subsystems detailed include: a pair of UV-optimized atmospheric dispersion correctors designed to function out to a zenith angle of 65°; high throughput HR and LR image slicers used to reformat the field-of-view; and a dispersion-compensating three-lens spectrographic camera design.

astro-ph.IM↗

arXiv2026

MORFEO: Advancing Towards Final Design

The Multiconjugate adaptive Optics Relay For ELT Observations (MORFEO) is a first-generation adaptive optics module for the Extremely Large Telescope (ELT), designed to deliver a diffraction-limited, highly uniform 53x53 arcsec field of view to the MICADO near-infrared camera. As the project advances toward its Final Design Review (FDR), significant consolidations have been achieved across all subsystems. This paper presents an updated overview of the MORFEO system, highlighting its dual operational modes (MCAO and SCAO) and recent developments in its opto-mechanical architecture. We dedicate specific focus to the core adaptive hardware, detailing the fifth-generation post-focal deformable mirrors, the highly complex Laser Guide Star (LGS) objective zoom system required to track sodium layer variations, and the Natural Guide Star (NGS) low-order and reference sensing strategies. Furthermore, we detail the advanced pseudo-open-loop control strategy managed by a split Hard and Soft Real-Time Computer architecture. Finally, we report the latest end-to-end performance estimations obtained via the SPECULA simulation framework, demonstrating compliance with the stringent Strehl Ratio and sky coverage requirements under median atmospheric conditions.

astro-ph.IM↗

arXiv2026

Current status of the High-Resolution Multi-Object Spectrograph (MOS-HR) for the Wide-field Spectroscopic Telescope

The Wide-field Spectroscopic Telescope (WST) is a planned 12-meter class dedicated spectroscopic facility for massive spectroscopic surveys. This paper presents the current status of Work Package 4.5, the High Resolution Multi-Object Spectrograph (HR-MOS) module. We describe the international team organization and optical design resulting from extensive trade-off studies, presenting its evolution driven by scientific requirements and technical constraints. Design parameters derived from science cases and astronomical community requirements are detailed. Given the critical importance of mass and volume budgets, we present envelope dimensions and mass estimates for HR-MOS. The spectrograph constructive parameters are defined, including optical fiber specifications, multiplex capability, and modular architecture. Finally, we present the structural analysis addressing mechanical stability and performance requirements for this high-resolution multi-object spectrograph.

astro-ph.IM↗

arXiv2026

The SOXS Spectrograph Instrument Control Software

SOXS (Son Of X-Shooter) is a new spectrograph for the European Southern Observatory (ESO), recently installed at the New Technology Telescope (NTT) at the La Silla Observatory, Chile. The main instrument goal consists in the characterization of transient sources, based on alerts. It covers from (partially) ultra-violet to visible and near-infrared bands, with a spectral resolution of R $\sim 4500$, using two separate, wavelength-optimized spectrographs. A scientific grade visible camera, primarily intended for target acquisition, also provides a "light imaging" mode. In this paper, we present the design of the SOXS Instrument Control Software, which is in charge of controlling all motors, calibration lamps and detectors, monitoring sensors and components' status, coordinating the execution of exposures, and implementing all observation, calibration and maintenance procedures. Given the extensive experience of the SOXS consortium in the development of instruments for the ESO Very Large Telescope (VLT), we decided to base the design of the Control System on the same standards, both for hardware and software control. We illustrate the control network, the instrument functions and detectors to be controlled, the overall design of SOXS Instrument Software (INS) and its main components. Then, we provide details about the control software for the most SOXS-specific components, and peculiar features: the piezoelectric tip-tilt corrector used for active compensation of mechanical flexures of the instrument; the cryogenic piezoelectric slit exchanger for the NIR spectrograph; the co-rotator monitoring system; and the control of the Commercial-Off-the-Shelf (COTS)- based imaging camera.

astro-ph.IM↗

arXiv2025

Interfacing adaptive optics simulations with the optical model: a powerful tool for MORFEO

In the framework of the MORFEO project, the Multi-Conjugated Adaptive Optics (MCAO) module for the European Extremely Large Telescope (ELT), we developed an integrated modeling tool to interface the optical model with the adaptive optics simulations, called ASSO (Adaptive opticS Simulation interfaced with Optical model). This tool is our asso nella manica (ace in the hole) to predict the performances of the AO relay, i.e., to estimate the wavefront error within the technical and scientific fields of view after AO correction. The tool is based on the IDL based simulator PyrAmid Simulator Software for Adaptive opTics Arcetri (PASSATA), on Zemax OpticStudio for the optical modelling, and on Matlab as interface software.

astro-ph.IM↗

arXiv2024

CUBES, the Cassegrain U-Band Efficient Spectrograph: towards final design review

In the era of Extremely Large Telescopes, the current generation of 8-10m facilities are likely to remain competitive at ground-UV wavelengths for the foreseeable future. The Cassegrain U-Band Efficient Spectrograph (CUBES) has been designed to provide high instrumental efficiency ( $>$ 37\%) observations in the near UV (305-400 nm requirement, 300-420 nm goal) at a spectral resolving power of R $>$ 20, 000 (with a lower-resolution, sky-limited mode of R $\sim$ 7, 000). With the design focusing on maximizing the instrument throughput (ensuring a Signal to Noise Ratio -SNR- $\sim$ 20 per spectral resolution element at 313 nm for U $\sim$ 17.5 mag objects in 1h of observations), it will offer new possibilities in many fields of astrophysics: i) access to key lines of stellar spectra (e.g. lighter elements, in particular Beryllium), extragalactic studies (e.g. circumgalactic medium of distant galaxies, cosmic UV background) and follow-up of explosive transients. We present the CUBES instrument design, currently in Phase-C and approaching the final design review, summarizing the hardware architecture and interfaces between the different subsystems as well as the relevant technical requirements. We describe the optical, mechanical, electrical design of the different subsystems (from the telescope adapter and support structure, through the main opto-mechanical path, including calibration unit, detector devices and cryostat control, main control electronics), detailing peculiar instrument functions like the Active Flexure Compensation (AFC). Furthermore, we outline the AITV concept and the main instrument operations giving an overview of its software ecosystem. Installation at the VLT is planned for 2028-2029 and first science operations in late 2029.

astro-ph.IM↗

arXiv2024

Automated scheduler for the SOXS instrument: design and performance

We present the advancements in the development of the scheduler for the Son Of X-shooter instrument at the ESO-NTT 3.58-m telescope in La Silla, Chile. SOXS is designed as a single-object spectroscopic facility and features a high-efficiency spectrograph with two arms covering the spectral range of 350-2000 nm and a mean resolving power of approximately R=4500. It will conduct UV-visible and near-infrared follow-up observations of astrophysical transients, drawing from a broad pool of targets accessible through the streaming services of wide-field telescopes, both current and future, as well as high-energy satellites. The instrument will cater to various scientific objectives within the astrophysical community, each entailing specific requirements for observation planning. SOXS will operate at the European Southern Observatory (ESO) in La Silla, without the presence of astronomers on the mountain. This poses a unique challenge for the scheduling process, demanding a fully automated algorithm that is autonomously interacting with the appropriate databases and the La Silla Weather API, and is capable of presenting the operator not only with an ordered list of optimal targets (in terms of observing constraints) but also with optimal backups in the event of changing weather conditions. This imposes the necessity for a scheduler with rapid-response capabilities without compromising the optimization process, ensuring the high quality of observations and best use of the time at the telescope. We thus developed a new highly available and scalable architecture, implementing API Restful applications like Docker Containers, API Gateway, and Python-based Flask frameworks. We provide an overview of the current state of the scheduler, which is now ready for the approaching on-site testing during Commissioning phase, along with insights into its web interface and preliminary performance tests.

astro-ph.IM↗

arXiv2024

The SOXS Instrument Control Software approaching the PAE

The Instrument Control Software of SOXS (Son Of X-Shooter), the forthcoming spectrograph for the ESO New Technology Telescope at the La Silla Observatory, has reached a mature state of development and is approaching the crucial Preliminary Acceptance in Europe phase. Now that all the subsystems have been integrated in the laboratories of the Padova Astronomical Observatory, the team operates for testing purposes with the whole instrument at both engineering and scientific level. These activities will make use of a set of software peculiarities that will be discussed in this contribution. In particular, we focus on the synoptic panel, the co-rotator system special device, on the Active Flexure Compensation system which controls two separate piezo tip-tilt devices.

astro-ph.IM↗

arXiv2024

The status of the NIR arm of the SOXS Instrument toward the PAE

The Son Of X-Shooter (SOXS) is a single object spectrograph, built by an international consortium for the 3.58-m ESO New Technology Telescope at the La Silla Observatory [1]. It offers a simultaneous spectral coverage over 350-2000 nm, with two separate spectrographs. In this paper we present the status of the Near InfraRed (NIR) cryogenic echelle cross-dispersed spectrograph [1], in the range 0.80-2.00 μm with 15 orders, equipped with an 2k x 2k Hawaii H2RG IR array from Teledyne, working at 40K, that is currently assembled and tested on the SOXS instrument, in the premises of INAF in Padova. We describe the different tests and results of the cryo, vacuum, opto-mechanics and detector subsystems that finally will be part of the PAE by ESO.

astro-ph.IM↗

arXiv2024

What is your favorite transient event? SOXS is almost ready to observe!

The Son Of X-Shooter (SOXS) will be the specialized facility to observe any transient event with a flexible scheduler at the ESO New Technology Telescope (NTT) at La Silla, Chile. SOXS is a single object spectrograph offering simultaneous spectral coverage in UV-VIS (350-850 nm) and NIR (800-2000 nm) wavelength regimes with an average of R~4500 for a 1arcsec slit. SOXS also has imaging capabilities in the visible wavelength regime. Currently, SOXS is being integrated at the INAF-Astronomical Observatory of Padova. Subsystem- and system-level tests and verification are ongoing to ensure and confirm that every requirement and performance are met. In this paper, we report on the integration and verification of SOXS as the team and the instrument prepare for the Preliminary Acceptance Europe (PAE).

astro-ph.IM↗

arXiv2024

ANDES, the high-resolution spectrograph for the ELT: RIZ Spectrograph preliminary design

We present here the preliminary design of the RIZ module, one of the visible spectrographs of the ANDES instrument 1. It is a fiber-fed high-resolution, high-stability spectrograph. Its design follows the guidelines of successful predecessors such as HARPS and ESPRESSO. In this paper we present the status of the spectrograph at the preliminary design stage. The spectrograph will be a warm, vacuum-operated, thermally controlled and fiber-fed echelle spectrograph. Following the phase A design, the huge etendue of the telescope will be reformed in the instrument with a long slit made of smaller fibers. We discuss the system design of the spectrographs system.

astro-ph.IM↗

arXiv2023

MORFEO enters final design phase

MORFEO (Multi-conjugate adaptive Optics Relay For ELT Observations, formerly MAORY), the MCAO system for the ELT, will provide diffraction-limited optical quality to the large field camera MICADO. MORFEO has officially passed the Preliminary Design Review and it is entering the final design phase. We present the current status of the project, with a focus on the adaptive optics system aspects and expected milestones during the next project phase.

astro-ph.IM↗

arXiv2022

Dynamic scheduling for SOXS instrument: environment, algorithms and development

We present development progress of the scheduler for the Son Of X-Shooter (SOXS) instrument at the ESO-NTT 3.58 meter telescope. SOXS will be a single object spectroscopic facility, consisting of a two-arms high-efficiency spectrograph covering the spectral range 350-2000 nanometer with a mean resolving power R$\approx$4500. SOXS will be uniquely dedicated to the UV-visible and near infrared follow up of astrophysical transients, with a very wide pool of targets available from the streaming services of wide-field telescopes, current and future. This instrument will serve a variety of scientific scopes in the astrophysical community, with each scope eliciting its specific requirements for observation planning, that the observing scheduler has to meet. Due to directions from the European Southern Observatory (ESO), the instrument will be operated only by La Silla staff, with no astronomer present on the mountain. This implies a new challenge for the scheduling process, requiring a fully automated algorithm that should be able to present the operator not only with and ordered list of optimal targets, but also with optimal back-ups, should anything in the observing conditions change. This imposes a fast-response capability to the scheduler, without compromising the optimization process, that ensures good quality of the observations. In this paper we present the current state of the scheduler, that is now almost complete, and of its web interface.

astro-ph.IM↗

arXiv2022

The Quality Check system architecture for Son-Of-X-Shooter SOXS

We report the implemented architecture for monitoring the health and the quality of the Son Of X-Shooter (SOXS) spectrograph for the New Technology Telescope in La Silla at the European Southern Observatory. Briefly, we report on the innovative no-SQL database approach used for storing time-series data that best suits for automatically triggering alarm, and report high-quality graphs on the dashboard to be used by the operation support team. The system is designed to constantly and actively monitor the Key Performance Indicators (KPI) metrics, as much automatically as possible, reducing the overhead on the support and operation teams. Moreover, we will also detail about the interface designed to inject quality checks metrics from the automated SOXS Pipeline (Young et al. 2022).

astro-ph.IM↗

arXiv2022

Progress on the SOXS NIR Spectrograph AIT

The Son Of X-Shooter (SOXS) is a single object spectrograph, built by an international consortium for the 3.58-m ESO New Technology Telescope at the La Silla Observatory, ranging from 350 to 2000 nm. In this paper, we present the progress in the AIT phase of the Near InfraRed (NIR) arm. We describe the different AIT phases of the cryo, vacuum, opto-mechanics and detector subsystems, that finally converged at the INAF-OAB premises in Merate (Italy), where the NIR spectrograph is currently being assembled and tested, before the final assembly on SOXS.

astro-ph.IM↗

arXiv2022

CUBES Phase A design overview -- The Cassegrain U-Band Efficient Spectrograph for the Very Large Telescope

We present the baseline conceptual design of the Cassegrain U-Band Efficient Spectrograph (CUBES) for the Very Large Telescope. CUBES will provide unprecedented sensitivity for spectroscopy on a 8 - 10 m class telescope in the ground ultraviolet (UV), spanning a bandwidth of > 100 nm that starts at 300 nm, the shortest wavelength accessible from the ground. The design has been optimized for end-to-end efficiency and provides a spectral resolving power of R > 20000, that will unlock a broad range of new topics across solar system, Galactic and extraglactic astronomy. The design also features a second, lower-resolution (R \sim 7000) mode and has the option of a fiberlink to the UVES instrument for simultaneous observations at longer wavelengths. Here we present the optical, mechanical and software design of the various subsystems of the instrument after the Phase A study of the project. We discuss the expected performances for the layout choices and highlight some of the performance trade-offs considered to best meet the instrument top-level requirements. We also introduce the model-based system engineering approach used to organize and manage the project activities and interfaces, in the context that it is increasingly necessary to integrate such tools in the development of complex astronomical projects.

astro-ph.IM↗

arXiv2021

MAORY: A Multi-conjugate Adaptive Optics RelaY for ELT

MAORY is the adaptive optics module for ELT providing two gravity invariant ports with the same optical quality for two different client instruments. It enable high angular resolution observations in the near infrared over a large field of view (~1 arcmin2 ) by real time compensation of the wavefront distortions due to atmospheric turbulence. Wavefront sensing is performed by laser and natural guide stars while the wavefront sensor compensation is performed by an adaptive deformable mirror in MAORY which works together with the telescope's adaptive and tip tilt mirrors M4 and M5 respectively.

astro-ph.IM↗

arXiv2020

Fundamental physics with Espresso: Towards an accurate wavelength calibration for a precision test of the fine-structure constant

Observations of metal absorption systems in the spectra of distant quasars allow to constrain a possible variation of the fine-structure constant throughout the history of the Universe. Such a test poses utmost demands on the wavelength accuracy and previous studies were limited by systematics in the spectrograph wavelength calibration. A substantial advance in the field is therefore expected from the new ultra-stable high-resolution spectrograph Espresso, recently installed at the VLT. In preparation of the fundamental physics related part of the Espresso GTO program, we present a thorough assessment of the Espresso wavelength accuracy and identify possible systematics at each of the different steps involved in the wavelength calibration process. Most importantly, we compare the default wavelength solution, based on the combination of Thorium-Argon arc lamp spectra and a Fabry-Pérot interferometer, to the fully independent calibration obtained from a laser frequency comb. We find wavelength-dependent discrepancies of up to 24m/s. This substantially exceeds the photon noise and highlights the presence of different sources of systematics, which we characterize in detail as part of this study. Nevertheless, our study demonstrates the outstanding accuracy of Espresso with respect to previously used spectrographs and we show that constraints of a relative change of the fine-structure constant at the $10^{-6}$ level can be obtained with Espresso without being limited by wavelength calibration systematics.

astro-ph.IM↗