arXiv subjects

Giovanna Tancredi

Publications and source records attributed to Giovanna Tancredi.

At least 19 recordsLinked to original sources

arXiv2026

Electrical post-fabrication tuning of aluminum Josephson junctions at room temperature

Josephson junctions are key elements of superconducting quantum technology, serving as the core building blocks of superconducting qubits. We present an experimental study on room-temperature electrical tuning of aluminum junctions, showing that voltage pulses can controllably increase their resistance and adjust the Josephson energy while maintaining qubit quality factors above 1 million. We find that the rate of resistance increase scales exponentially with pulse amplitude during manipulation. Following the manipulation, the resistance increases spontaneously through contributions proportional to both the initial resistance and the preceding manipulation. We show that this spontaneous increase halts at cryogenic temperatures, and resumes again at room temperature. Using our stepwise protocol, we achieve up to a 270% increase in junction resistance, corresponding to a reduction of nearly 2 GHz of the qubit transition frequency. These results establish the achievable range, relaxation behavior, and practical limits of electrical tuning, enabling post-fabrication mitigation of frequency crowding in quantum processors.

quant-ph↗

arXiv2026

Learning Lindblad Dynamics of a Superconducting Quantum Processor

Accurate models of quantum processors are essential for understanding, calibrating, and improving their performance. In practice, model construction must balance physical detail against the experimental and computational effort required to reliably learn parameters. Compact descriptions therefore often rely on assumptions about which interactions, noise processes, or hidden degrees of freedom are relevant. Here we introduce LIMINAL, a data-driven framework for testing such assumptions and selecting minimal adequate Lindblad models. LIMINAL fits nested candidate models to time-resolved tomographic data and uses likelihood-ratio tests to decide when added physical mechanisms are warranted. We apply LIMINAL to a five-qubit superconducting processor, identifying an idling model with three-local Hamiltonian terms and two-local dissipation, while finding no support for three-local dissipation. We further apply it to recover driven single-qubit Hamiltonians, reconstruct a shaped-pulse Hamiltonian without assuming an analytic pulse model, and test hidden-qubit extensions in coupler-mediated dynamics, demonstrating the applicability of the framework for a wide range of tasks.

quant-ph↗

arXiv2026

Demonstrating and Benchmarking Classical Shadows for Lindblad Tomography

Spurious couplings and decoherence degrade the performance of solid-state quantum processors, demanding careful design, calibration, and mitigation protocols. These strategies often rely on characterization of the idling processor, but tomographic recovery of (time-independent) Lindblad dynamics scales exponentially with qubit count. Here, we experimentally benchmark and demonstrate that randomized ("shadow") measurements accelerate Lindblad tomography on a superconducting transmon processor. We first implement extensible Lindblad tomography, which estimates Lindblad parameters using a complete tomographic dataset, and use it as a baseline to benchmark a shadow tomography approach, shadow Lindblad tomography. The shadow approach recycles randomized configurations to estimate the same Lindblad parameters using far fewer resources under physically motivated locality assumptions. We experimentally verify these assumptions in our processor by implementing the protocols on one- and three-qubit subsystems; here, shadow Lindblad tomography reproduces extensible Lindblad tomography within uncertainties while using exponentially fewer configurations. Leveraging this efficiency, we apply shadow Lindblad tomography to the full five-qubit processor and recover all single qubit dissipation and two-qubit coupling parameters in 9 hours of acquisition time compared to an estimated 58 hours for extensible Lindblad tomography. Additionally, our shadow implementation is compatible with conventional Gaussian error propagation, avoiding the use of median-of-means estimators. Together, these results demonstrate how randomized shadow tomography protocols can be practically implemented to learn quantum processor dynamics at an increasing qubit count.

quant-ph↗

arXiv2026

Real-time adaptive tracking of fluctuating relaxation rates in superconducting qubits

The fidelity of operations on a solid-state quantum processor is fundamentally bounded by environmental decoherence. Characterizing environmental fluctuations is challenging because the acquisition time of nonadaptive experimental protocols limits temporal precision and can average out rapid features of the underlying dynamics. Here, we overcome this temporal-resolution limit by two orders of magnitude using a field-programmable gate-array (FPGA) powered classical controller that adaptively and continuously tracks the relaxation-time fluctuations of two fixed-frequency superconducting transmon qubits, which exhibit average relaxation times of approximately 0.17 ms and occasionally exceed 0.5 ms. We report events in which the relaxation time switches by nearly an order of magnitude over timescales of just tens of milliseconds, rather than minutes or hours as previously reported. Our real-time Bayesian estimation protocol estimates relaxation times within a few milliseconds, close to the decoherence timescale itself. Our statistical analysis further suggests that some of these fast fluctuations arise from two-level systems switching at rates up to 10 Hz, four orders of magnitude faster than earlier reports. These results redefine the timescales relevant for calibration in superconducting quantum processing units, establish a reference for rapid relaxation-rate characterization in device screening, and improve our understanding of fast relaxation dynamics.

quant-ph↗

arXiv2025

Quantum Process Tomography with Digital Twins of Error Matrices

Accurate and robust quantum process tomography (QPT) is crucial for verifying quantum gates and diagnosing implementation faults in experiments aimed at building universal quantum computers. However, the reliability of QPT protocols is often compromised by faulty probes, particularly state preparation and measurement (SPAM) errors, which introduce fundamental inconsistencies in traditional QPT algorithms. We propose and investigate enhanced QPT for multi-qubit systems by integrating the error matrix in a digital twin of the identity process matrix, enabling statistical refinement of SPAM error learning and improving QPT precision. Through numerical simulations, we demonstrate that our approach enables highly accurate and faithful process characterization. We further validate our method experimentally using superconducting quantum gates, achieving at least an order-of-magnitude fidelity improvement over standard QPT. Our results provide a practical and precise method for assessing quantum gate fidelity and enhancing QPT on a given hardware.

quant-ph↗

arXiv2025

Quantum synchronization in one-dimensional topological systems

The phenomenon of synchronization, where entities exhibit stable oscillations with aligned frequencies and phases, has been detected in diverse areas of natural science. It plays a crucial role in achieving frequency locking in multiple applications such as microwave communication and signal processing. The study of synchronization in quantum systems has gained significant interest, particularly in developing robust methods for synchronizing distant objects. Here, we demonstrate that synchronization between the boundary sites of one-dimensional generalized Aubry-André-Harper models can be induced through applying dissipation on the central sites. Two types of synchronization, stemming from the topological edge states, are characterized by the off-diagonal or diagonal correlations between the boundary sites. We analyze the relaxation rate to realize the synchronization and its acceleration with bulk dissipation. Remarkably, the synchronous oscillations maintain steady amplitude and frequency in the thermodynamic limit. Moreover, we show that the synchronization is robust against the perturbations in the Hamiltonian and initial states, highlighting its potential for practical implementation in quantum networks.

quant-ph↗

arXiv2025

Neural-network-based design and implementation of fast and robust quantum gates

We present a continuous-time, neural-network-based approach to optimal control in quantum systems, with a focus on pulse engineering for quantum gates. Leveraging the framework of neural ordinary differential equations, we construct control fields as outputs of trainable neural networks, thereby eliminating the need for discrete parametrization or predefined bases. This allows for generation of smooth, hardware-agnostic pulses that can be optimized directly using differentiable integrators. As a case study we design, and implement experimentally, a short and detuning-robust $π/2$ pulse for photon parity measurements in superconducting transmon circuits. This is achieved through simultaneous optimization for robustness and suppressing the leakage outside of the computational basis. These pulses maintain a fidelity greater than $99.9\%$ over a detuning range of $\approx \pm 20\mathrm{MHz}$, thereby outperforming traditional techniques while retaining comparable gate durations. This showcases its potential for high-performance quantum control in experimentally relevant settings.

quant-ph↗

arXiv2025

Mitigating transients in flux-control signals in a superconducting quantum processor

Flux-tunable qubits and couplers are common components in superconducting quantum processors. However, dynamically controlling these elements via current pulses poses challenges due to distortions and transients in the propagating signals. In particular, long-time transients can persist, adversely affecting subsequent qubit control operations. We model the flux control line as a first-order RC circuit and introduce a class of pulses designed to mitigate long-time transients. We theoretically demonstrate the robustness of these pulses against parameter mischaracterization and provide experimental evidence of their effectiveness in mitigating transients when applied to a flux-tunable qubit coupler. The proposed pulse design offers a practical solution for mitigating long-time transients, enabling efficient and reliable experiment tune-ups without requiring detailed flux line characterization.

quant-ph↗

arXiv2024

Quantum SWAP gate realized with CZ and iSWAP gates in a superconducting architecture

It is advantageous for any quantum processor to support different classes of two-qubit quantum logic gates when compiling quantum circuits, a property that is typically not seen with existing platforms. In particular, access to a gate set that includes support for the CZ-type, the iSWAP-type, and the SWAP-type families of gates, renders conversions between these gate families unnecessary during compilation as any two-qubit Clifford gate can be executed using at most one two-qubit gate from this set, plus additional single-qubit gates. We experimentally demonstrate that a SWAP gate can be decomposed into one iSWAP gate followed by one CZ gate, affirming a more efficient compilation strategy over the conventional approach that relies on three iSWAP or three CZ gates to replace a SWAP gate. Our implementation makes use of a superconducting quantum processor design based on fixed-frequency transmon qubits coupled together by a parametrically modulated tunable transmon coupler, extending this platform's native gate set so that any two-qubit Clifford unitary matrix can be realized using no more than two two-qubit gates and single-qubit gates.

quant-ph↗

arXiv2024

Fast unconditional reset and leakage reduction in fixed-frequency transmon qubits

The realization of fault-tolerant quantum computing requires the execution of quantum error-correction (QEC) schemes, to mitigate the fragile nature of qubits. In this context, to ensure the success of QEC, a protocol capable of implementing both qubit reset and leakage reduction is highly desirable. We demonstrate such a protocol in an architecture consisting of fixed-frequency transmon qubits pair-wise coupled via tunable couplers -- an architecture that is compatible with the surface code. We use tunable couplers to transfer any undesired qubit excitation to the readout resonator of the qubit, from which this excitation decays into the feedline. In total, the combination of qubit reset, leakage reduction, and coupler reset takes only 83ns to complete. Our reset scheme is fast, unconditional, and achieves fidelities well above 99%, thus enabling fixed-frequency qubit architectures as future implementations of fault-tolerant quantum computers. Our protocol also provides a means to both reduce QEC cycle runtime and improve algorithmic fidelity on quantum computers.

quant-ph↗

arXiv2024

Signal crosstalk in a flip-chip quantum processor

Quantum processors require a signal-delivery architecture with high addressability (low crosstalk) to ensure high performance already at the scale of dozens of qubits. Signal crosstalk causes inadvertent driving of quantum gates, which will adversely affect quantum-gate fidelities in scaled-up devices. Here, we demonstrate packaged flip-chip superconducting quantum processors with signal-crosstalk performance competitive with those reported in other platforms. For capacitively coupled qubit-drive lines, we find on-resonant crosstalk better than -27 dB (average -37 dB). For inductively coupled magnetic-flux-drive lines, we find less than 0.13 % direct-current flux crosstalk (average 0.05 %). These observed crosstalk levels are adequately small and indicate a decreasing trend with increasing distance, which is promising for further scaling up to larger numbers of qubits. We discuss the implication of our results for the design of a low-crosstalk, on-chip signal delivery architecture, including the influence of a shielding tunnel structure, potential sources of crosstalk, and estimation of crosstalk-induced qubit-gate error in scaled-up quantum processors.

quant-ph↗

arXiv2024

A small footprint travelling-wave parametric amplifier with a high Signal-to-Noise Ratio improvement in a wide band

We characterise a small footprint travelling-wave parametric amplifier (TWPA). The TWPA is built with magnetically flux-tunable superconducting nonlinear asymmetric inductive elements (SNAILs) and parallel-plate capacitors. It implements three-wave mixing (3WM) with resonant phase matching (RPM), a small cutoff frequency for high gain per unitcell and impedance matching networks for large bandwidth impedance matching. The device has 200 unitcells and a physical footprint of only 1.1 mm^2, yet demonstrates an average parametric gain of 19 dB over a 3 GHz bandwidth, an average effective signal-to-noise ratio improvement of 10 dB and a clear speedup of qubit readout time.

physics.app-ph↗

arXiv2023

Experimentally verified, fast analytic and numerical design of superconducting resonators in flip-chip architectures

In superconducting quantum processors, the predictability of device parameters is of increasing importance as many labs scale up their systems to larger sizes in a 3D-integrated architecture. In particular, the properties of superconducting resonators must be controlled well to ensure high-fidelity multiplexed readout of qubits. Here we present a method, based on conformal mapping techniques, to predict a resonator's parameters directly from its 2D cross-section, without computationally heavy and time-consuming 3D simulation. We demonstrate the method's validity by comparing the calculated resonator frequency and coupling quality factor with those obtained through 3D finite-element-method simulation and by measurement of 15 resonators in a flip-chip-integrated architecture. We achieve a discrepancy of less than 2% between designed and measured frequencies, for 6-GHz resonators. We also propose a design method that reduces the sensitivity of the resonant frequency to variations in the inter-chip spacing.

quant-ph↗

arXiv2023

Mitigation of frequency collisions in superconducting quantum processors

The reproducibility of qubit parameters is a challenge for scaling up superconducting quantum processors. Signal crosstalk imposes constraints on the frequency separation between neighboring qubits. The frequency uncertainty of transmon qubits arising from the fabrication process is attributed to deviations in the Josephson junction area, tunnel barrier thickness, and the qubit capacitor. We decrease the sensitivity to these variations by fabricating larger Josephson junctions and reduce the wafer-level standard deviation in resistance down to 2%. We characterize 32 identical transmon qubits and demonstrate the reproducibility of the qubit frequencies with a 40 MHz standard deviation (i.e. 1%) with qubit quality factors exceeding 2 million. We perform two-level-system (TLS) spectroscopy and observe no significant increase in the number of TLSs causing qubit relaxation. We further show by simulation that for our parametric-gate architecture, and accounting only for errors caused by the uncertainty of the qubit frequency, we can scale up to 100 qubits with an average of only 3 collisions between quantum-gate transition frequencies, assuming 2% crosstalk and 99.9% target gate fidelity.

quant-ph↗

arXiv2022

Measurement and control of a superconducting quantum processor with a fully-integrated radio-frequency system on a chip

We describe a digital microwave platform called Presto, designed for measurement and control of multiple quantum bits (qubits) and based on the third-generation radio-frequency system on a chip. Presto uses direct digital synthesis to create signals up to 9 GHz on 16 synchronous output ports, while synchronously analyzing response on 16 input ports. Presto has 16 DC-bias outputs, 4 inputs and 4 outputs for digital triggers or markers, and two continuous-wave outputs for synthesizing frequencies up to 15 GHz. Scaling to a large number of qubits is enabled through deterministic synchronization of multiple Presto units. A Python application programming interface configures a firmware for synthesis and analysis of pulses, coordinated by an event sequencer. The analysis integrates template matching (matched filtering) and low-latency (184 - 254 ns) feedback to enable a wide range of multi-qubit experiments. We demonstrate Presto's capabilities with experiments on a sample consisting of two superconducting qubits connected via a flux-tunable coupler. We show single-shot readout and active reset of a single qubit; randomized benchmarking of single-qubit gates showing 99.972% fidelity, limited by the coherence time of the qubit; and calibration of a two-qubit iSWAP gate.

quant-ph↗

arXiv2022

Three-wave mixing traveling-wave parametric amplifier with periodic variation of the circuit parameters

We report the implementation of a near-quantum-limited, traveling-wave parametric amplifier that uses three-wave mixing (3WM). To favor amplification by 3WM, we use the superconducting nonlinear asymmetric inductive element (SNAIL) loops, biased with a dc magnetic flux. In addition, we equip the device with dispersion engineering features to create a stop-band at the second harmonic of the pump and suppress the propagation of the higher harmonics that otherwise degrade the amplification. With a chain of 440 SNAILs, the amplifier provides up to 20 dB gain and a 3-dB bandwidth of 1 GHz. The added noise by the amplifier is found to be less than one photon.

quant-ph↗

arXiv2022

Transmon qubit readout fidelity at the threshold for quantum error correction without a quantum-limited amplifier

High-fidelity and rapid readout of a qubit state is key to quantum computing and communication, and it is a prerequisite for quantum error correction. We present a readout scheme for superconducting qubits that combines two microwave techniques: applying a shelving technique to the qubit that effectively increases the energy-relaxation time, and a two-tone excitation of the readout resonator to distinguish among qubit populations in higher energy levels. Using a machine-learning algorithm to post-process the two-tone measurement results further improves the qubit-state assignment fidelity. We perform single-shot frequency-multiplexed qubit readout, with a 140ns readout time, and demonstrate 99.5% assignment fidelity for two-state readout and 96.9% for three-state readout - without using a quantum-limited amplifier.

quant-ph↗

arXiv2022

Extensive characterization of a family of efficient three-qubit gates at the coherence limit

While all quantum algorithms can be expressed in terms of single-qubit and two-qubit gates, more expressive gate sets can help reduce the algorithmic depth. This is important in the presence of gate errors, especially those due to decoherence. Using superconducting qubits, we have implemented a three-qubit gate by simultaneously applying two-qubit operations, thereby realizing a three-body interaction. This method straightforwardly extends to other quantum hardware architectures, requires only a "firmware" upgrade to implement, and is faster than its constituent two-qubit gates. The three-qubit gate represents an entire family of operations, creating flexibility in quantum-circuit compilation. We demonstrate a gate fidelity of $97.90\%$, which is near the coherence limit of our device. We then generate two classes of entangled states, the GHZ and W states, by applying the new gate only once; in comparison, decompositions into the standard gate set would have a two-qubit gate depth of two and three, respectively. Finally, we combine characterization methods and analyze the experimental and statistical errors on the fidelity of the gates and of the target states.

quant-ph↗