arXiv subjects

Giovanni Franzese

Publications and source records attributed to Giovanni Franzese.

14 recordsLinked to original sources

arXiv2026

A machine learning framework for uncovering stochastic nonlinear dynamics from noisy data

Modeling real-world systems requires accounting for noise - whether it arises from unpredictable fluctuations in financial markets, irregular rhythms in biological systems, or environmental variability in ecosystems. While the behavior of such systems can often be described by stochastic differential equations, a central challenge is understanding how noise influences the inference of system parameters and dynamics from data. Traditional symbolic regression methods can uncover governing equations but typically ignore uncertainty. Conversely, Gaussian processes provide principled uncertainty quantification but offer little insight into the underlying dynamics. In this work, we bridge this gap with a hybrid symbolic regression-probabilistic machine learning framework that recovers the symbolic form of the governing equations while simultaneously inferring uncertainty in the system parameters. The framework combines deep symbolic regression with Gaussian process-based maximum likelihood estimation to separately model the deterministic dynamics and the noise structure, without requiring prior assumptions about their functional forms. We verify the approach on numerical benchmarks, including harmonic, Duffing, and van der Pol oscillators, and validate it on an experimental system of coupled biological oscillators exhibiting synchronization, where the algorithm successfully identifies both the symbolic and stochastic components. The framework is data-efficient, requiring as few as 100-1000 data points, and robust to noise - demonstrating its broad potential in domains where uncertainty is intrinsic and both the structure and variability of dynamical systems must be understood.

cs.LG↗

arXiv2025

Mastering Contact-rich Tasks by Combining Soft and Rigid Robotics with Imitation Learning

Soft robots have the potential to revolutionize the use of robotic systems with their capability of establishing safe, robust, and adaptable interactions with their environment, but their precise control remains challenging. In contrast, traditional rigid robots offer high accuracy and repeatability but lack the flexibility of soft robots. We argue that combining these characteristics in a hybrid robotic platform can significantly enhance overall capabilities. This work presents a novel hybrid robotic platform that integrates a rigid manipulator with a fully developed soft arm. This system is equipped with the intelligence necessary to perform flexible and generalizable tasks through imitation learning autonomously. The physical softness and machine learning enable our platform to achieve highly generalizable skills, while the rigid components ensure precision and repeatability.

cs.RO↗

arXiv2025

ILeSiA: Interactive Learning of Robot Situational Awareness from Camera Input

Learning from demonstration is a promising approach for teaching robots new skills. However, a central challenge in the execution of acquired skills is the ability to recognize faults and prevent failures. This is essential because demonstrations typically cover only a limited set of scenarios and often only the successful ones. During task execution, unforeseen situations may arise, such as changes in the robot's environment or interaction with human operators. To recognize such situations, this paper focuses on teaching the robot situational awareness by using a camera input and labeling frames as safe or risky. We train a Gaussian Process (GP) regression model fed by a low-dimensional latent space representation of the input images. The model outputs a continuous risk score ranging from zero to one, quantifying the degree of risk at each timestep. This allows for pausing task execution in unsafe situations and directly adding new training data, labeled by the human user. Our experiments on a robotic manipulator show that the proposed method can reliably detect both known and novel faults using only a single example for each new fault. In contrast, a standard multi-layer perceptron (MLP) performs well only on faults it has encountered during training. Our method enables the next generation of cobots to be rapidly deployed with easy-to-set-up, vision-based risk assessment, proactively safeguarding humans and detecting misaligned parts or missing objects before failures occur. We provide all the code and data required to reproduce our experiments at imitrob.ciirc.cvut.cz/publications/ilesia.

cs.RO↗

arXiv2025

Generalizable Motion Policies through Keypoint Parameterization and Transportation Maps

Learning from Interactive Demonstrations has revolutionized the way non-expert humans teach robots. It is enough to kinesthetically move the robot around to teach pick-and-place, dressing, or cleaning policies. However, the main challenge is correctly generalizing to novel situations, e.g., different surfaces to clean or different arm postures to dress. This article proposes a novel task parameterization and generalization to transport the original robot policy, i.e., position, velocity, orientation, and stiffness. Unlike the state of the art, only a set of keypoints is tracked during the demonstration and the execution, e.g., a point cloud of the surface to clean. We then propose to fit a nonlinear transformation that would deform the space and then the original policy using the paired source and target point sets. The use of function approximators like Gaussian Processes allows us to generalize, or transport, the policy from every space location while estimating the uncertainty of the resulting policy due to the limited task keypoints and the reduced number of demonstrations. We compare the algorithm's performance with state-of-the-art task parameterization alternatives and analyze the effect of different function approximators. We also validated the algorithm on robot manipulation tasks, i.e., different posture arm dressing, different location product reshelving, and different shape surface cleaning.

cs.RO↗

arXiv2025

MUKCa: Accurate and Affordable Cobot Calibration Without External Measurement Devices

To increase the reliability of collaborative robots in performing daily tasks, we require them to be accurate and not only repeatable. However, having a calibrated kinematics model is regrettably a luxury, as available calibration tools are usually more expensive than the robots themselves. With this work, we aim to contribute to the democratization of cobots calibration by providing an inexpensive yet highly effective alternative to existing tools. The proposed minimalist calibration routine relies on a 3D-printable tool as the only physical aid to the calibration process. This two-socket spherical-joint tool kinematically constrains the robot at the end effector while collecting the training set. An optimization routine updates the nominal model to ensure a consistent prediction for each socket and the undistorted mean distance between them. We validated the algorithm on three robotic platforms: Franka, Kuka, and Kinova Cobots. The calibrated models reduce the mean absolute error from the order of 10 mm to 0.2 mm for both Franka and Kuka robots. We provide two additional experimental campaigns with the Franka Robot to render the improvements more tangible. First, we implement Cartesian control with and without the calibrated model and use it to perform a standard peg-in-the-hole task with a tolerance of 0.4 mm between the peg and the hole. Second, we perform a repeated drawing task combining Cartesian control with learning from demonstration. Both tasks consistently failed when the model was not calibrated, while they consistently succeeded after calibration.

cs.RO↗

arXiv2025

Real-Time Generation of Near-Minimum-Energy Trajectories via Constraint-Informed Residual Learning

Industrial robotics demands significant energy to operate, making energy-reduction methodologies increasingly important. Strategies for planning minimum-energy trajectories typically involve solving nonlinear optimal control problems (OCPs), which rarely cope with real-time requirements. In this paper, we propose a paradigm for generating near minimum-energy trajectories for manipulators by learning from optimal solutions. Our paradigm leverages a residual learning approach, which embeds boundary conditions while focusing on learning only the adjustments needed to steer a standard solution to an optimal one. Compared to a computationally expensive OCP-based planner, our paradigm achieves 87.3% of the performance near the training dataset and 50.8% far from the dataset, while being two to three orders of magnitude faster.

cs.RO↗

arXiv2024

A Unifying Variational Framework for Gaussian Process Motion Planning

To control how a robot moves, motion planning algorithms must compute paths in high-dimensional state spaces while accounting for physical constraints related to motors and joints, generating smooth and stable motions, avoiding obstacles, and preventing collisions. A motion planning algorithm must therefore balance competing demands, and should ideally incorporate uncertainty to handle noise, model errors, and facilitate deployment in complex environments. To address these issues, we introduce a framework for robot motion planning based on variational Gaussian processes, which unifies and generalizes various probabilistic-inference-based motion planning algorithms, and connects them with optimization-based planners. Our framework provides a principled and flexible way to incorporate equality-based, inequality-based, and soft motion-planning constraints during end-to-end training, is straightforward to implement, and provides both interval-based and Monte-Carlo-based uncertainty estimates. We conduct experiments using different environments and robots, comparing against baseline approaches based on the feasibility of the planned paths, and obstacle avoidance quality. Results show that our proposed approach yields a good balance between success rates and path quality.

cs.RO↗

arXiv2024

Do You Need a Hand? -- a Bimanual Robotic Dressing Assistance Scheme

Developing physically assistive robots capable of dressing assistance has the potential to significantly improve the lives of the elderly and disabled population. However, most robotics dressing strategies considered a single robot only, which greatly limited the performance of the dressing assistance. In fact, healthcare professionals perform the task bimanually. Inspired by them, we propose a bimanual cooperative scheme for robotic dressing assistance. In the scheme, an interactive robot joins hands with the human thus supporting/guiding the human in the dressing process, while the dressing robot performs the dressing task. We identify a key feature that affects the dressing action and propose an optimal strategy for the interactive robot using the feature. A dressing coordinate based on the posture of the arm is defined to better encode the dressing policy. We validate the interactive dressing scheme with extensive experiments and also an ablation study. The experiment video is available on https://sites.google.com/view/bimanualassitdressing/home

cs.RO↗

arXiv2023

Interactive Imitation Learning of Bimanual Movement Primitives

Performing bimanual tasks with dual robotic setups can drastically increase the impact on industrial and daily life applications. However, performing a bimanual task brings many challenges, like synchronization and coordination of the single-arm policies. This article proposes the Safe, Interactive Movement Primitives Learning (SIMPLe) algorithm, to teach and correct single or dual arm impedance policies directly from human kinesthetic demonstrations. Moreover, it proposes a novel graph encoding of the policy based on Gaussian Process Regression (GPR) where the single-arm motion is guaranteed to converge close to the trajectory and then towards the demonstrated goal. Regulation of the robot stiffness according to the epistemic uncertainty of the policy allows for easily reshaping the motion with human feedback and/or adapting to external perturbations. We tested the SIMPLe algorithm on a real dual-arm setup where the teacher gave separate single-arm demonstrations and then successfully synchronized them only using kinesthetic feedback or where the original bimanual demonstration was locally reshaped to pick a box at a different height.

cs.RO↗

arXiv2022

Interactive Imitation Learning in Robotics: A Survey

Interactive Imitation Learning (IIL) is a branch of Imitation Learning (IL) where human feedback is provided intermittently during robot execution allowing an online improvement of the robot's behavior. In recent years, IIL has increasingly started to carve out its own space as a promising data-driven alternative for solving complex robotic tasks. The advantages of IIL are its data-efficient, as the human feedback guides the robot directly towards an improved behavior, and its robustness, as the distribution mismatch between the teacher and learner trajectories is minimized by providing feedback directly over the learner's trajectories. Nevertheless, despite the opportunities that IIL presents, its terminology, structure, and applicability are not clear nor unified in the literature, slowing down its development and, therefore, the research of innovative formulations and discoveries. In this article, we attempt to facilitate research in IIL and lower entry barriers for new practitioners by providing a survey of the field that unifies and structures it. In addition, we aim to raise awareness of its potential, what has been accomplished and what are still open research questions. We organize the most relevant works in IIL in terms of human-robot interaction (i.e., types of feedback), interfaces (i.e., means of providing feedback), learning (i.e., models learned from feedback and function approximators), user experience (i.e., human perception about the learning process), applications, and benchmarks. Furthermore, we analyze similarities and differences between IIL and RL, providing a discussion on how the concepts offline, online, off-policy and on-policy learning should be transferred to IIL from the RL literature. We particularly focus on robotic applications in the real world and discuss their implications, limitations, and promising future areas of research.

cs.RO↗

arXiv2022

Solving Robot Assembly Tasks by Combining Interactive Teaching and Self-Exploration

Many high precision (dis)assembly tasks are still being performed by humans, whereas this is an ideal opportunity for automation. This paper provides a framework which enables a non-expert human operator to teach a robotic arm to do complex precision tasks. The framework uses a variable Cartesian impedance controller to execute trajectories learned from kinesthetic human demonstrations. Feedback can be given to interactively reshape or speed up the original demonstration. Board localization is done through a visual estimation of the task board position and refined through haptic feedback. Our framework is tested on the Robothon benchmark disassembly challenge, where the robot has to perform complex precision tasks, such as a key insertion. The results show high success rates for each of the manipulation subtasks, including cases when the box is in novel poses. An ablation study is also performed to evaluate the components of the framework.

cs.RO↗

arXiv2022

Learning to Pick at Non-Zero-Velocity from Interactive Demonstrations

This work investigates how the intricate task of a continuous pick & place (P&P) motion may be learned from humans based on demonstrations and corrections. Due to the complexity of the task, these demonstrations are often slow and even slightly flawed, particularly at moments when multiple aspects (i.e., end-effector movement, orientation, and gripper width) have to be demonstrated at once. Rather than training a person to give better demonstrations, non-expert users are provided with the ability to interactively modify the dynamics of their initial demonstration through teleoperated corrective feedback. This in turn allows them to teach motions outside of their own physical capabilities. In the end, the goal is to obtain a faster but reliable execution of the task. The presented framework learns the desired movement dynamics based on the current Cartesian position with Gaussian Processes (GPs), resulting in a reactive, time-invariant policy. Using GPs also allows online interactive corrections and active disturbance rejection through epistemic uncertainty minimization. The experimental evaluation of the framework is carried out on a Franka-Emika Panda. Tests were performed to determine i) the framework's effectiveness in successfully learning how to quickly pick & place an object, ii) ease of policy correction to environmental changes (i.e., different object sizes and mass), and iii) the framework's usability for non-expert users.

cs.RO↗

arXiv2021

Adaptation through prediction: multisensory active inference torque control

Adaptation to external and internal changes is major for robotic systems in uncertain environments. Here we present a novel multisensory active inference torque controller for industrial arms that shows how prediction can be used to resolve adaptation. Our controller, inspired by the predictive brain hypothesis, improves the capabilities of current active inference approaches by incorporating learning and multimodal integration of low and high-dimensional sensor inputs (e.g., raw images) while simplifying the architecture. We performed a systematic evaluation of our model on a 7DoF Franka Emika Panda robot arm by comparing its behavior with previous active inference baselines and classic controllers, analyzing both qualitatively and quantitatively adaptation capabilities and control accuracy. Results showed improved control accuracy in goal-directed reaching with high noise rejection due to multimodal filtering, and adaptability to dynamical inertial changes, elasticity constraints and human disturbances without the need to relearn the model nor parameter retuning.

cs.RO↗

arXiv2021

ILoSA: Interactive Learning of Stiffness and Attractors

Teaching robots how to apply forces according to our preferences is still an open challenge that has to be tackled from multiple engineering perspectives. This paper studies how to learn variable impedance policies where both the Cartesian stiffness and the attractor can be learned from human demonstrations and corrections with a user-friendly interface. The presented framework, named ILoSA, uses Gaussian Processes for policy learning, identifying regions of uncertainty and allowing interactive corrections, stiffness modulation and active disturbance rejection. The experimental evaluation of the framework is carried out on a Franka-Emika Panda in four separate cases with unique force interaction properties: 1) pulling a plug wherein a sudden force discontinuity occurs upon successful removal of the plug, 2) pushing a box where a sustained force is required to keep the robot in motion, 3) wiping a whiteboard in which the force is applied perpendicular to the direction of movement, and 4) inserting a plug to verify the usability for precision-critical tasks in an experimental validation performed with non-expert users.

cs.RO↗