arXiv subjects

Giovanni Tardini

Publications and source records attributed to Giovanni Tardini.

6 recordsLinked to original sources

arXiv2026

Core-edge integrated modeling of ARC: on the effect of impurity transport and detachment conditions

Integrated modeling of ARC H-modes has been conducted to assess the feasibility of high-performance scenarios compatible with divertor detachment. The analysis incorporates self-consistent evolution of impurity radiation and density profiles, demonstrating that fusion power levels approaching a GW can be achieved while maintaining divertor temperatures below 2 eV with Ar seeding. Sensitivity studies reveal a strong dependence of fusion power on the separatrix density, with performance spanning 750-1000 MW, and a weaker dependence on enrichment factor and pedestal density. Alternative seeding strategies using Neon have also been explored. Plasmas with Argon seeding consistently access H-mode, providing the highest fusion power and detached divertor operation, whereas Neon seeding leads to lower performance (600-850 MW) and less robust H-mode access, due to excessive core impurity accumulation. A small W impurity peaking has been found, with decreasing values at higher Zeff. Further analyses incorporate reduced momentum transport modeling, and sensitivity studies of neoclassical impurity transport, confirming the robustness of the results. Overall, these findings support the viability of high-performing H-mode operation in ARC, ensuring divertor protection, enabled through Argon and Neon impurity seeding.

physics.plasm-ph↗

arXiv2025

Impurity peaking of SPARC H-modes: a sensitivity study on physics and engineering assumptions

In this paper, an overview of the impurity transport for three H-mode plasmas in the upcoming SPARC tokamak has been provided. The simulations have been performed within the ASTRA+STRAHL framework, using FACIT and TGLF-SAT2 to predict, respectively, neoclassical and turbulent core transport, while a neural network trained on EPED simulations has been employed to calculate the pedestal height and width self-consistently. A benchmark with previous simulations at constant impurity fraction has been provided for three H-modes, spanning different plasma current and magnetic field values. For a scenario, additional simulations have been performed to account for uncertainties in the modeling assumptions. The predictions are nearly insensitive to changes in the top of pedestal W concentrations. Varying the Ar pedestal concentration has shown a small effect on the impurity peaking and nearly constant fusion gain values, due to multiple effects on pedestal pressure, main ion dilution and density peaking. The inclusion of rotation in ASTRA simulations has shown minimal impact on confinement and impurity transport predictions. An exploratory study has been provided with a first set of simulations treating D and T separately, experiencing a maximum fusion power at 55-45% DT fuel composition, and an asymmetric distribution with respect to the D concentration. All the results, including sensitivity scans of toroidal velocity and ion temperature and density gradients, highlighted that turbulent impurity transport prevails on the neoclassical component, aligning with previous ITER predictions, and suggesting that next generation devices like SPARC, operating at low collisionality, will experience low W accumulation.

physics.plasm-ph↗

arXiv2025

Integrated Modeling of SPARC H-mode Scenarios: Exploration of the Impact of Modeling Assumptions on Predicted Performance

In this paper an extensive database of SPARC H-modes confinement predictions has been provided, to assess its variability with respect to few input assumptions. The simulations have been performed within the ASTRA framework, using the quasi-linear model TGLF SAT2, including electromagnetic effects, for the core transport, and a neural network trained on EPED simulations to predict the pedestal height and width self-consistently. The database has been developed starting from two SPARC H-mode discharges (12.2 T, i.e. Primary Reference Discharge or PRD, and 8 T, i.e. reduced field) and permuting 4 input parameters (W concentration, DT mixture concentration, temperature ratio at top of pedestal and deviation of pedestal pressure from the EPED prediction), to perform a sensitivity study. For the PRD a scan of auxiliary input power (ion cyclotron heating) has been performed up to 25MW, to keep highly radiative plasmas above the LH power threshold as predicted by Martin and Schmidtmayr power scalings. A scan of pedestal density has then been performed for both PRD and 8T databases. ptop/pEPED and Ti/Te at top of pedestal showed the biggest impact on the fusion gain. Significant variation is observed across the database, highlighting the importance of sensitivity studies. Below a certain W concentration, the 12T database shows that Q > 5 is consistently achieved for full-field H-modes with 11 MW of auxiliary power, and values of Q > 2 are assured when increasing the input power to keep the plasma in H-mode. The 8T database demonstrates that SPARC can access a Q > 1 operational window with low W concentration, making it a potentially interesting scenario for obtaining breakeven conditions.

physics.plasm-ph↗

arXiv2024

Combing physics-based and data-driven predictions for quantitatively accurate models that extrapolate well; with application to DIII-D, AUG, and ITER tokamak fusion reactors

Methodologies for combining the accuracy of data-driven models with extrapolability of physics-based models are described and tested, for the task of building transport models of tokamak fusion reactors that extrapolate well to new operational regimes. Information from multiple physics simulations (the ASTRA transport code with gyro-Bohm and TGLF estimates for turbulent diffusion) as well as multiple distinct experiments (DIII-D and AUG tokamaks) are considered. Applications of the methodology to the task of commissioning and controlling a new reactor such as ITER are discussed.

physics.plasm-ph↗

arXiv2015

Measurement of a 2D fast-ion velocity distribution function by tomographic inversion of fast-ion D-alpha spectra

We present the first measurement of a local fast-ion 2D velocity distribution function $f(v_\parallel, v_\perp)$. To this end, we heated a plasma in ASDEX Upgrade by neutral beam injection and measured spectra of fast-ion D-alpha (FIDA) light from the plasma center in three views simultaneously. The measured spectra agree very well with synthetic spectra calculated from a TRANSP/NUBEAM simulation. Based on the measured FIDA spectra alone, we infer $f(v_\parallel, v_\perp)$ by tomographic inversion. Salient features of our measurement of $f(v_\parallel, v_\perp)$ agree reasonably well with the simulation: the measured as well as the simulated $f(v_\parallel, v_\perp)$ are lopsided towards negative velocities parallel to the magnetic field, and they have similar shapes. Further, the peaks in the simulation of $f(v_\parallel, v_\perp)$ at full and half injection energies of the neutral beam also appear in the measurement at similar velocity-space locations. We expect that we can measure spectra in up to seven views simultaneously in the next ASDEX Upgrade campaign which would further improve measurements of $f(v_\parallel, v_\perp)$ by tomographic inversion.

physics.plasm-ph↗

arXiv2015

Adjoint Monte Carlo Simulation of Fusion Product Activation Probe Experiment in ASDEX Upgrade tokamak

The activation probe is a robust tool to measure flux of fusion products from a magnetically confined plasma. A carefully chosen solid sample is exposed to the flux, and the impinging ions transmute the material making it radioactive. Ultra-low level gamma-ray spectroscopy is used post mortem to measure the activity and, thus, the number of fusion products. This contribution presents the numerical analysis of the first measurement in the ASDEX Upgrade tokamak, which was also the first experiment to measure a single discharge. The ASCOT suite of codes was used to perform adjoint/reverse Monte Carlo calculations of the fusion products. The analysis facilitates, for the first time, a comparison of numerical and experimental values for absolutely calibrated flux. The results agree to within a factor of about two, which can be considered a quite good result considering the fact that all features of the plasma cannot be accounted in the simulations. Also an alternative to the present probe orientation was studied. The results suggest that a better optimized orientation could measure the flux from a significantly larger part of the plasma.

physics.plasm-ph↗