SearcharxivSearch

arXiv subjects

Giulia Torcolacci

Publications and source records attributed to Giulia Torcolacci.

10 recordsLinked to original sources

Over-The-Air Extreme Learning Machines with Nonlinear Stacked Intelligent Metasurfaces

The recently envisioned goal-oriented communications paradigm requires machine learning inference to be performed directly on wirelessly transferred data. This paper presents an eXtremely Large (XL) Multiple-Input Multiple-Output (MIMO) system that operates as an Extreme Learning Machine (ELM) to execute Over-The-Air (OTA) binary classification. To reduce hardware complexity, the receiver is equipped with cascaded metasurfaces terminating in a single radio-frequency chain. A front metasurface layer applies a fixed nonlinear response to the incoming signal, acting as the ELM's activation function. Subsequent tunable linear metasurface layers physically approximate the trained network weights directly in the wave domain. Numerical evaluations across diverse datasets showcase that our XL MIMO architecture achieves classification accuracy comparable to idealized digital models, thereby proving the viability of low-complexity, wave-domain OTA learning.

eess.SP

OAM-Enabled Holographic MIMO Communications with Stacked Intelligent Metasurfaces

This study investigates orbital angular momentum (OAM)-based holographic multiple-input multiple-output (HMIMO) links enabled by stacked intelligent metasurfaces (SIM) in the radiative near-field. By using multilayer programmable metasurfaces at both link ends, SIMs enable analog electromagnetic domain wave processing for low-complexity and energy-efficient flexible wavefront synthesis. We analyzed OAM mode generation and reception with SIM-based transceivers and quantified their ability to synthesize near-orthogonal modes in practical discrete HMIMO architectures. We further developed a correlation-driven optimization algorithm that maximizes reconstruction accuracy of OAM beams. Numerical evaluations revealed a fundamental decoupling between the required antenna aperture, which limits the supported mode orders, and the SIM layer depth, which governs crosstalk suppression. The results confirm that properly dimensioned SIM architectures provide robust near-field spatial multiplexing, nearly balanced per-mode capacities, and graceful degradation across link distances without requiring continuous phase re-optimization, thereby supporting scalable and low-overhead HMIMO communications.

eess.SP

Over-The-Air Extreme Learning Machines with XL Reception via Nonlinear Cascaded Metasurfaces

The recently envisioned goal-oriented communications paradigm calls for the application of inference on wirelessly transferred data via Machine Learning (ML) tools. An emerging research direction deals with the realization of inference ML models directly in the physical layer of Multiple-Input Multiple-Output (MIMO) systems, which, however, entails certain significant challenges. In this paper, leveraging the technology of programmable MetaSurfaces (MSs), we present an eXtremely Large (XL) MIMO system that acts as an Extreme Learning Machine (ELM) performing binary classification tasks completely Over-The-Air (OTA), which can be trained in closed form. The proposed system comprises a receiver architecture consisting of densely parallel placed diffractive layers of XL MSs, also known as Stacked Intelligent Metasurfaces (SIM), followed by a single reception radio-frequency chain. The front layer facing the XL MIMO channel consists of identical unit cells of a fixed NonLinear (NL) response, whereas the remaining layers of elements of tunable linear responses are utilized to approximate OTA the trained ELM weights. Our numerical investigations showcase that, in the XL regime of MS elements, the proposed XL-MIMO-ELM system achieves performance comparable to that of digital and idealized ML models across diverse datasets and wireless scenarios, thereby demonstrating the feasibility of embedding OTA learning capabilities into future wireless systems.

eess.SP

Nonlinear EM-based Signal Processing

The use of high-frequency bands, combined with antenna arrays containing an extremely large number of elements (XL-MIMO), is pushing current technology to its limits in terms of hardware complexity, latency, and power consumption. A promising approach to achieving scalable and sustainable solutions is to shift part of the signal processing directly into the electromagnetic (EM) domain. In this paper, we investigate novel architectures that harness the interaction of reconfigurable passive linear and nonlinear (NL) scattering elements positioned in the reactive near field of signal sources. The objective is to enable multifunctional linear and NL EM signal processing to occur directly "over-the-air." Numerical results highlight the potential to significantly reduce both system complexity and the number of RF chains, while still achieving key performance metrics in applications such as direction-of-arrival and position estimation, without the need for additional analog or digital processing.

eess.SP

A Grant-free Coded Random Access Scheme for Near-field Communications

The industrial Internet of things (IIoT) is revolutionizing industrial processes by facilitating massive machine-type communications among countless interconnected devices. To efficiently handle the resulting large-scale and sporadic traffic, grant-free random access protocols-especially coded random access (CRA)-have emerged as scalable and reliable solutions. At the same time, advancements in wireless hardware, including extremely large-scale MIMO arrays and high-frequency communication (e.g., mmWave, Terahertz), are pushing network operations into the near-field propagation regime, allowing for dense connectivity and enhanced spatial multiplexing. This paper proposes an innovative approach that combines near-field spatial multiplexing with the interference mitigation capabilities of CRA, utilizing an extremely large aperture array at the access point. This integration improves reliability and reduces access latency, offering a robust framework for IIoT connectivity in next-generation 6G networks.

eess.SP

Scalable RIS-Aided Beamforming Strategies for Near-Field MU-MISO via Multi-Antenna Feeder

This paper investigates a modular beamforming framework for reconfigurable intelligent surface (RIS)-aided multi-user (MU) communications in the near-field regime, built upon a novel antenna architecture integrating an active multi-antenna feeder (AMAF) array with a transmissive RIS (T-RIS), referred to as AT-RIS. This decoupling enables coordinated yet independently configurable designs in the AMAF and T-RIS domains, supporting flexible strategies with diverse complexity-performance trade-offs. Several implementations are analyzed, including diagonal and non-diagonal T-RIS architectures, paired with precoding schemes based on focusing, minimum mean square error, and eigenmode decomposition. Simulation results demonstrate that while non-diagonal schemes maximize sum rate in scenarios with a limited number of User Equipments (UEs) and high angular separability, they exhibit fairness and scalability limitations as UE density increases. Conversely, diagonal T-RIS configurations, particularly the proposed focusing-based scheme with uniform feeder-side power allocation, offer robust, fair, and scalable performance with minimal channel state information. The findings emphasize the critical impact of UEs' angular separability and reveal inherent trade-offs among spectral efficiency, complexity, and fairness, positioning diagonal AT-RIS architectures as practical solutions for scalable near-field MU multiple-input single-output systems.

eess.SP

Extremely Large-Scale Dynamic Metasurface Antennas for 6G Near-Field Networks: Opportunities and Challenges

6G networks will need to support higher data rates, high-precision localization, and imaging capabilities. Near-field technologies, enabled by extremely large-scale (XL)-arrays, are expected to be essential physical-layer solutions to meet these ambitious requirements. However, implementing XL-array systems using traditional fully-digital or hybrid analog/digital architectures poses significant challenges due to high power consumption and implementation costs. Emerging XL-dynamic metasurface antennas (XL-DMAs) provide a promising alternative, enabling ultra-low power and cost-efficient solutions, making them ideal candidates for 6G near-field networks. In this article, we discuss the opportunities and challenges of XL-DMAs employed in 6G near-field networks. We first outline the fundamental principles of XL-DMAs and present the specifics of the near-field model of XL-DMAs. We then highlight several promising applications that might benefit from XL-DMAs, including near-field communication, localization, and imaging. Finally, we discuss several open problems and potential future directions that should be addressed to fully exploit the capabilities of XL-DMAs in the next 6G near-field networks.

eess.SP

An Overview on Over-the-air Electromagnetic Signal Processing

This article provides a tutorial on over-the-air electromagnetic signal processing (ESP) for next-generation wireless networks, addressing the limitations of digital processing to enhance the efficiency and sustainability of future 6th Generation (6G) systems. It explores the integration of electromagnetism and signal processing (SP) under a unified framework by highlighting how their convergence can drive innovations for 6G technologies. Key topics include electromagnetic (EM) wave-based processing, the application of metamaterials and advanced antennas to optimize EM field manipulation with a reduced number of radiofrequency chains, and their applications in holographic multiple-input multiple-output systems. By showcasing enabling technologies and use cases, the article illustrates how wave-based processing can minimize energy consumption, complexity, and latency, offering an effective framework for more sustainable and efficient wireless systems. This article aims to assist researchers and professionals in integrating advanced EM technologies with conventional SP methods.

eess.SP

Holographic Imaging with XL-MIMO and RIS: Illumination and Reflection Design

This paper addresses a near-field imaging problem utilizing extremely large-scale multiple-input multiple-output (XL-MIMO) antennas and reconfigurable intelligent surfaces (RISs) already in place for wireless communications. To this end, we consider a system with a fixed transmitting antenna array illuminating a region of interest (ROI) and a fixed receiving antenna array inferring the ROI's scattering coefficients. Leveraging XL-MIMO and high frequencies, the ROI is situated in the radiative near-field region of both antenna arrays, thus enhancing the degrees of freedom (DoF) (i.e., the channel matrix rank) of the illuminating and sensing channels available for imaging, here referred to as holographic imaging. To further boost the imaging performance, we optimize the illuminating waveform by solving a min-max optimization problem having the upper bound of the mean squared error (MSE) of the image estimate as the objective function. Additionally, we address the challenge of non-line-of-sight (NLOS) scenarios by considering the presence of a RIS and deriving its optimal reflection coefficients. Numerical results investigate the interplay between illumination optimization, geometric configuration (monostatic and bistatic), the DoF of the illuminating and sensing channels, image estimation accuracy, and image complexity.

eess.SP

Holographic MIMO Communications exploiting the Orbital Angular Momentum

This study delves into the potential of harnessing the orbital angular momentum (OAM) property of electromagnetic waves in near-field and line-of-sight scenarios by utilizing large intelligent surfaces, in the context of holographic multiple-input multiple-output (MIMO) communications. The paper starts by characterizing OAM-based communications and investigating the connection between OAM-carrying waves and optimum communication modes recently analyzed for communicating with smart surfaces. Subsequently, it proposes implementable strategies for generating and detecting OAM-based communication signals using intelligent surfaces and optimization methods that leverage focusing techniques. Then, the performance of these strategies is quantitatively evaluated through simulations. The numerical results show that OAM waves while constituting a viable and more practical alternative to optimum communication modes are sub-optimal in terms of achievable capacity.

eess.SP