arXiv subjects

Giuseppe Emanuele Lio

Publications and source records attributed to Giuseppe Emanuele Lio.

12 recordsLinked to original sources

arXiv2026

Arduino based interferometer stabilizer equipped with a digital lock-in amplifier

Interferometric sensors are ubiquitous in precision metrology, yet their performance is fundamentally limited by environmental noise and thermal drift. To achieve maximum sensitivity, these systems must be actively stabilized at the quadrature point of the interference fringe. Commercial stabilization solutions, typically based on analog lock-in amplifiers or FPGA architectures, are often prohibitively expensive and do not not offer the flexibility needed for custom experimental setups. In this work, we present an open-source, compact and low-cost digital stabilization system built upon the dual-core Arduino Giga R1 microcontroller. The system features a custom analog front-end with programmable gain amplifiers (PGAs) and active signal conditioning, enabling direct integration with standard amplified photodiodes. We implement a firmware-based digital lock-in amplifier running at a 100 kHz sampling rate, which performs real-time demodulation and PID feedback control without the latency bottlenecks of PC-based loops. Experimental characterization demonstrates that the system effectively suppresses long-term thermal drift and actively rejects external perturbations. The resulting device provides a standalone, Arduino-based alternative for laser frequency stabilization and interferometric control in educational and research laboratories.

physics.optics↗

arXiv2025

Near-visible low power tuning of nematic-liquid crystal integrated silicon nitride ring resonator

The development of compact, low-power, and high-performance integrated photonic phase shifters is critical for advancing emerging technologies such as light detection and ranging (LiDAR), optical information processing and quantum applications. Liquid crystal (LC)-based phase shifters offer a promising solution thanks to their large refractive index contrast and their low power consumption. However, it remains challenging to incorporate LCs into integrated photonics and the operating wavelength has been limited to near infrared. Here, we demonstrate a liquid-crystal-based phase shifter operating at 780 nm, a relevant wavelength for cold atom-based quantum applications, by incorporating nematic LCs (E7) into a silicon nitride (SiN) ring resonator. Our device achieves 2pi phase modulation with very low power of 2.1 nW and low driving voltages of 7 V with exceptionally low Vpi times L (half wave voltage times length) value of 0.014 V-cm, enabling precise control over light propagation in a compact footprint. This work marks a significant step toward realizing low-power, compact, and efficient LC integrated photonic circuits based on SiN platform for next-generation LiDAR and quantum optical systems.

physics.optics↗

arXiv2025

Fast and Robust Speckle Pattern Authentication by Scale Invariant Feature Transform algorithm in Physical Unclonable Functions

Nowadays, due to the growing phenomenon of forgery in many fields, the interest in developing new anti-counterfeiting device and cryptography keys, based on the Physical Unclonable Functions (PUFs) paradigm, is widely increased. PUFs are physical hardware with an intrinsic, irreproducible disorder that allows for on-demand cryptographic key extraction. Among them, optical PUF are characterized by a large number of degrees of freedom resulting in higher security and higher sensitivity to environmental conditions. While these promising features led to the growth of advanced fabrication strategies and materials for new PUF devices, their combination with robust recognition algorithm remains largely unexplored. In this work, we present a metric-independent authentication approach that leverages the Scale Invariant Feature Transform (SIFT) algorithm to extract unique and invariant features from the speckle patterns generated by optical Physical Unclonable Functions (PUFs). The application of SIFT to the challenge response pairs (CRPs) protocol allows us to correctly authenticate a client while denying any other fraudulent access. In this way, the authentication process is highly reliable even in presence of response rotation, zooming, and cropping that may occur in consecutive PUF interrogations and to which other postprocessing algorithm are highly sensitive. This characteristics together with the speed of the method (tens of microseconds for each operation) broaden the applicability and reliability of PUF to practical high-security authentication or merchandise anti-counterfeiting.

cs.CR↗

arXiv2023

Flexible Physical Unclonable Functions based on non-deterministically distributed Dye-Doped Fibers and Droplets

The development of new anti-counterfeiting solutions is a constant challenge and involves several research fields. Much interest is devoted to systems that are impossible to clone, based on the Physical Unclonable Function (PUF) paradigm. In this work, new strategies based on electrospinning and electrospraying of dye-doped polymeric materials are presented for the manufacturing of flexible free-standing films that embed different PUF keys. Films can be used to fabricate anticounterfeiting labels having three encryption levels: i) a map of fluorescent polymer droplets, with non deterministic positions on a dense yarn of polymer nanofibers; ii) a characteristic fluorescence spectrum for each label; iii) a challenge-response pairs (CRPs) identification protocol based on the strong nature of the physical unclonable function. The intrinsic uniqueness introduced by the deposition techniques encodes enough complexity into the optical anti-counterfeiting tag to generate thousands of cryptographic keys. The simple and cheap fabrication process as well as the multilevel authentication makes such colored polymeric unclonable tags a practical solution in the secure protection of merchandise in our daily life.

cond-mat.mtrl-sci↗

arXiv2023

Unlocking optical coupling tunability in epsilon-near-zero metamaterials through liquid crystal nanocavities

Epsilon-near-zero (ENZ) metamaterials represent a powerful toolkit for selectively transmitting and localizing light through cavity resonances, enabling the study of mesoscopic phenomena and facilitating the design of photonic devices. In this experimental study, we demonstrate the feasibility of engineering and actively controlling cavity modes, as well as tuning their mutual coupling, in an ENZ multilayer structure. Specifically, by employing a high-birefringence liquid crystal film as a tunable nanocavity, the polarization-dependent coupling of resonant modes with narrow spectral width and spatial extent was achieved. Surface forces aparatus (SFA) allowed us to continuously and precisely control the thickness of the liquid crystal film contained between the nanocavities and thus vary the detuning between the cavity modes. Hence, we were able to manipulate nanocavities anti-crossing behaviors. The suggested methodology unlocks the full potential of tunable optical coupling in epsilon-near-zero metamaterials and provides a versatile approach to the creation of tunable photonic devices, including bio-photonic sensors, and/or tunable planar metamaterials for on-chip spectrometers.

physics.optics↗

arXiv2023

Strain-adjustable reflectivity of polyurethane nanofiber membrane for thermal management applications

Passive radiative cooling technologies are highly attractive in pursuing sustainable development. However, current cooling materials are often static, which makes it difficult to cope with the varying needs of all-weather thermal comfort management. Herein, a strategy is designed to obtain flexible thermoplastic polyurethane nanofiber (Es-TPU) membranes via electrospinning, realizing reversible in-situ solvent-free switching between radiative cooling and solar heating through changes in its optical reflectivity by stretching. In its radiative cooling state (0% strain), the Es-TPU membrane shows a high and angular-independent reflectance of 95.6% in the 0.25-2.5 μm wavelength range and an infrared emissivity of 93.3% in the atmospheric transparency window (8-13 μm), reaching a temperature drop of 10 °C at midday, with a corresponding cooling power of 118.25 W/m2. The excellent mechanical properties of the Es-TPU membrane allows the continuous adjustment of reflectivity by reversibly stretching it, reaching a reflectivity of 61.1% (ΔR=34.5%) under an elongation strain of 80%, leading to a net temperature increase of 9.5 °C above ambient of an absorbing substrate and an equivalent power of 220.34 W/m2 in this solar heating mode. The strong haze, hydrophobicity and outstanding aging resistance exhibited by this scalable membrane hold promise for achieving uniform illumination with tunable strength and efficient thermal management in practical applications.

cond-mat.mtrl-sci↗

arXiv2022

Swarm of lightsail nanosatellites for Solar System exploration

This paper presents a study for the realization of a space mission which employs nanosatellites driven by an external laser source impinging on an optimized lightsail, as a valuable technology to launch swarms of spacecrafts into the Solar System. Nanosatellites propelled by laser can be useful for the heliosphere exploration and for planetary observation, if suitably equipped with sensors, or be adopted for the establishment of network systems when placed into specific orbits. By varying the area-to-mass ratio (i.e., the ratio between the sail area and the payload weight) and the laser power, it is ossible to insert nanosatellites into different hyperbolic orbits with respect to Earth, thus reaching the target by means of controlled trajectories in a relatively short amount of time. A mission involving nanosatellites of the order of 1 kg of mass is envisioned, by describing all the on-board subsystems and satisfying all the requirements in term of power and mass budget. Particular attention is paid to the telecommunication subsystem, which must offer all the necessary functionalities. To fabricate the lightsail, the thin films technology has been considered, by verifying the sail thermal stability during the thrust phase. Moreover, the problem of mechanical stability of the lightsail has been tackled, showing that the distance between the ligthsail structure and the payload plays a pivotal role. Some potential applications of the proposed technology are discussed, such as the mapping of the heliospheric environment.

physics.app-ph↗

arXiv2022

Quantifying the Sensitivity and Unclonability of Optical Physical Unclonable Functions

Due to their unmatched entropy, complexity, and security level, optical Physical Unclonable Functions (PUFs) currently receive a lot of interest in the literature. Despite the large body of existing works, however, one of their core features has never been quantified in detail, namely their physical unclonability. This paper tackles this fundamental and yet largely unaddressed issue. In simulations and/or experiments, the sensitivity of diffraction-based optical responses is investigated with respect to various small alterations such as variation in the position, size, and number of the scatterers, as well as perturbations in the spatial alignment between the physical unclonable function (PUF) and the measurement apparatus. Our analysis focuses on 2D optical PUFs because of their relevance in integrated applications and the need to reply to security concerns that can be raised when the physical structure of the geometry is accessible. Among the results of this study, the sensitivity analysis shows that a positional perturbation of scatterers on the order of \SI{30}{\nano\meter}, i.e., far below the wavelength of the probing laser light of \SI{632}{\nano\meter} wavelength, is sufficient to invalidate the PUF response and thus detect a forgery attempt. These results support and quantify the high adversarial efforts required to clone optical PUFs, even for 2D layouts.

cs.CR↗

arXiv2021

Tailoring of Plasmonic Functionalized Metastructures to Enhance Local Heating Release

Plasmonic nanoheaters are reported that produce a significant local heating when excited by a 532 nm wavelength focussed laser beam. A significant temperature increase derives from the strong confinement of electric field enabled by the specific arrangement of Au nanodisks constituting the nanoheater. The thermal response is much more sensitive when layering the gold nanoheaters by a thick layer of doped polymer, reaching a temperature variation of more than 250°C. The modulation of the excitation by a chopper enables the fine control of the thermal response with a measured maximum temperature variation of about 60°C in a single period. These intriguing features can be efficiently exploited for the design of novel systems finding application in nano medicine and nano chemistry

physics.optics↗

arXiv2020

Hyper Resolution Two Photon Direct Laser Writing using ENZ Nano-Cavity

A novel technique is reported to improve the resolution of two-photon direct laser writing lithography. Thanks to the high collimation enabled by extraordinary $\varepsilon_{NZ}$ (near-zero) metamaterial features, ultra-thin dielectric hyper resolute nanostructures are within reach. With respect to the standard direct laser writing approach, a size reduction of $89\%$ and $50\%$ , in height and width respectively, is achieved with the height of the structures adjustable between 5nm and 50nm. The retrieved 2D fabrication parameters are exploited for fabricating hyper resolute 3D structures. In particular, a highly detailed dielectric bas-relief (500 nm of full height) of Da Vinci's \textit{"Lady with an Ermine"} has been realized. The proof-of-concept result shows intriguing cues for the current and trendsetting research scenario in anti-counterfeiting applications, flat optics and photonics.

physics.app-ph↗

arXiv2020

Color Tuning by Spontaneous Propagation of Gap Surface Plasmons in Epsilon Near Zero Nano-Cavity

This work presents numerical and experimental results of plasmonic Metal-Insulator optical nano-cavities. The systems are composed of Silver as metal, polyvinylpyrrolidone or indium tin oxide or zinc oxide as insulator. The proposed nano-cavities exhibit extraordinary effects as colors changing in function of the incident/view angles, enhancement of the experimental real and imaginary parts of the pseudo dielectric constant, an extraordinary transmission of 50$\%$ and zero reflection for both polarizations at the resonant wavelengths. These results lead to the formation and propagation of surface plasmon polaritons and their hybridization in gap surface plasmons. The concurrence of these effects allow studying the Goos-Hänchen shift by exploiting the very narrow $Δ$ and $Ψ$ ellipsometer parameters. Thank to their optical properties, the proposed nano-cavities could be applied in several fields such tunable color filters, optics, photonics and sensing.

physics.optics↗

arXiv2019

A numerical ellipsometric analysis (NEA) of nanoscale layered systems

A simple and robust method able to predict, with high accuracy, the optical properties of single and multi-layer nanostructures is presented. The method exploits a COMSOL Multiphysics simulation platform and it has been validated by three case studies with increasing numerical complexity: i) a single thin layer (20 nm) of Ag deposited on a glass substrate; ii) a metamaterial composed of five bi-layers of Ag/ITO (Indium Tin Oxide), with a thickness of 20 nm each; iii) a system based on a three-materials unit cell (AZO/ITO/Ag), but without any thickness periodicity (AZO stands for Al$_2$O$_3$/Zinc Oxide). Numerical results have been compared with experimental data provided by real ellipsometric measurements performed on the above mentioned nanostructures ad-hoc fabricated. The obtained agreement is excellent suggesting this research as a valid approach to design materials able to work in a broad spectrum range.

physics.app-ph↗