arXiv subjects

Giuseppe Silano

Publications and source records attributed to Giuseppe Silano.

At least 19 recordsLinked to original sources

arXiv2026

3D Euler-Angle Orientation Control for Two-Ray Fading Mitigation in Maritime Air-to-Sea Communications

Maritime Air-to-Sea links are dominated by a line-of-sight ray and a sea-surface reflected ray whose destructive combination produces deep fades. Existing mitigation strategies optimize Unmanned Aerial Vehicle position or trajectory but leave attitude unexploited. This paper treats the full three dimensional attitude as a physical-layer control variable that shapes the two-ray interference through antenna phase-center displacement. Under small-angle and far-field assumptions, the constructive-interference condition reduces to an affine constraint in the Euler angles and admits a closed-form family of minimum-norm attitude candidates. A differentiable soft-minimum rule yields a smooth reference tracked by a constrained Nonlinear Model Predictive Control controller on a fully-actuated tilting multirotor. The proposed scheme increases cumulative throughput by 11.4% over a pitch-only benchmark and 22.2% over a zero-orientation baseline, while preserving trajectory tracking and respecting actuator limits.

cs.RO↗

arXiv2026

Readiness Barrier Functions: Forward-Invariant Control Authority for Overactuated Multirotor Allocation

Allocation schemes that greedily maximize a readiness metric over the actuator fiber bundle of an overactuated multirotor produce commands that jump between disconnected optimal strata, demanding actuator rates no motor can deliver; effort-minimizing schemes are continuous but cannot guarantee that wrench-rate authority stays above any certified level. We reconcile the two by treating authority as a forward-invariant quantity: a control barrier function on the log-determinant of the drag-aware actuator-authority co-metric, enforced at torque level by a quadratic program in the allocation null space. A single design inequality renders the certified set compact and strictly interior to the actuator box, with the readiness cost of any rotor deactivation given in closed form as $\ln(n/(n{-}m))$ for symmetric designs. Tracking is sacrificed only through an explicit alignment ratio, with wrench error bounded by $\mathcal{O}(\rho^{-1/2})$ and a robust variant handles motor-parameter uncertainty with a closed-form floor shift independent of the airframe matrix. On a hexarotor and a fully-actuated octorotor the closed-form gap matches simulation to machine precision; in the authority-scarce regime greedy maximization violates the certified floor and commits wrench errors up to eighty times larger than the proposed filter, which holds invariance of the certified set at negligible tracking cost.

cs.RO↗

arXiv2026

Sensitivity-Based Robust NMPC for Close-Proximity Offshore Wind Turbine Inspection with a Tilted Multirotor

Close-proximity offshore wind turbine inspection requires strict clearance control around large cylindrical structures under wind and model mismatch. Nominal Nonlinear Model Predictive Control (NMPC) may violate safety constraints when mass, inertia, thrust effectiveness, drag, or wind conditions differ from nominal assumptions. We propose a sensitivity-based robust NMPC for a tilted multirotor that robustifies the tower-clearance constraint via online constraint tightening. First-order parametric state sensitivities provide a structured-uncertainty margin, while bounded gusts are handled by a stage-dependent additive margin. The formulation augments the nominal NMPC with sensitivity propagation and margin evaluation only, leaving the receding-horizon optimization structure unchanged. Monte-Carlo evaluation over 500 uncertainty realizations on a boundary-critical helical inspection trajectory shows that the proposed controller eliminates the clearance violations observed under nominal NMPC at the cost of a moderate increase in solve time.

cs.RO↗

arXiv2026

Sensitivity-Based Tube NMPC for Cooperative Aerial Structures Under Parametric Uncertainty

This paper presents a sensitivity-based tube Nonlinear Model Predictive Control (NMPC) framework for cooperative aerial chains under bounded parametric uncertainty. We consider a planar two-vehicle chain connected by rigid links, modeled with input-rate actuation to enforce slew-rate and magnitude limits on thrust and torque. Robustness to uncertainty in link mass, length, and inertia is achieved by propagating first-order parametric state sensitivities along the horizon and using them to compute online constraint-tightening margins. We robustify an inter-link separation constraint, implemented via a smooth cosine embedding, and thrust-magnitude bounds. The method is implemented in MATLAB and evaluated with boundary-hugging maneuvers and Monte-Carlo uncertainty sampling. Results show improved constraint margins under uncertainty with tracking performance comparable to nominal NMPC.

cs.RO↗

arXiv2026

Communications-Aware NMPC for Multi-Rotor Aerial Relay Networks Under Jamming Interference

Multi-Rotor Aerial Vehicles (MRAVs) are increasingly used in communication-dependent missions where connectivity loss directly compromises task execution. Existing anti-jamming strategies often decouple motion from communication, overlooking that link quality depends on vehicle attitude and antenna orientation. In coplanar platforms, ``tilt-to-translate'' maneuvers can inadvertently align antenna nulls with communication partners, causing severe degradation under interference. This paper presents a modular communications-aware control approach combining a high-level $\max$-$\min$ trajectory generator with an actuator-level Nonlinear Model Predictive Controller (NMPC). The trajectory layer optimizes the \emph{weakest link}---the link with the lower instantaneous Signal-to-Interference-plus-Noise Ratio, which bottlenecks the harmonic-mean end-to-end capacity---while the NMPC enforces vehicle dynamics, actuator limits, and antenna-alignment constraints. Antenna directionality is handled geometrically, avoiding explicit radiation-pattern parametrization. The method is evaluated in a relay scenario with an active jammer and compared across coplanar and tilted-propeller architectures. Results show a near two-order-of-magnitude increase in minimum end-to-end capacity, markedly reducing outage events, with moderate average-capacity gains. Tilted platforms preserve feasibility and link quality, whereas coplanar vehicles show recurrent degradation. These findings indicate that full actuation is a key enabler of reliable communications-aware operation under adversarial directional constraints.

cs.RO↗

arXiv2025

STL-Based Motion Planning and Uncertainty-Aware Risk Analysis for Human-Robot Collaboration with a Multi-Rotor Aerial Vehicle

This paper presents a motion planning and risk analysis framework for enhancing human-robot collaboration with a Multi-Rotor Aerial Vehicle. The proposed method employs Signal Temporal Logic to encode key mission objectives, including safety, temporal requirements, and human preferences, with particular emphasis on ergonomics and comfort. An optimization-based planner generates dynamically feasible trajectories while explicitly accounting for the vehicle's nonlinear dynamics and actuation constraints. To address the resulting non-convex and non-smooth optimization problem, smooth robustness approximations and gradient-based techniques are adopted. In addition, an uncertainty-aware risk analysis is introduced to quantify the likelihood of specification violations under human-pose uncertainty. A robustness-aware event-triggered replanning strategy further enables online recovery from disturbances and unforeseen events by preserving safety margins during execution. The framework is validated through MATLAB and Gazebo simulations on an object handover task inspired by power line maintenance scenarios. Results demonstrate the ability of the proposed method to achieve safe, efficient, and resilient human-robot collaboration under realistic operating conditions.

cs.RO↗

arXiv2025

Gesture-Controlled Aerial Robot Formation for Human-Swarm Interaction in Safety Monitoring Applications

This paper presents a formation control approach for contactless gesture-based Human-Swarm Interaction (HSI) between a team of multi-rotor Unmanned Aerial Vehicles (UAVs) and a human worker. The approach is designed to monitor the safety of human workers, particularly those operating at heights. In the proposed dynamic formation scheme, one UAV acts as the formation leader, equipped with sensors for detecting human workers and recognizing gestures. The follower UAVs maintain a predetermined formation relative to the worker's position, providing additional perspectives of the monitored scene. Hand gestures enable the human worker to specify movement and action commands for the UAV team and to initiate other mission-related tasks without requiring additional communication channels or specific markers. Combined with a novel unified human detection and tracking algorithm, a human position estimation method, and a gesture detection pipeline, the proposed approach represents the first instance of an HSI system incorporating all these modules onboard real-world UAVs. Simulations and field experiments involving three UAVs and a human worker in a mock-up scenario demonstrate the effectiveness and responsiveness of the proposed approach.

cs.RO↗

arXiv2025

Free-Space Optical Communication-Driven NMPC Framework for Multi-Rotor Aerial Vehicles in Structured Inspection Scenarios

This paper introduces a Nonlinear Model Predictive Control (NMPC) framework for communication-aware motion planning of Multi-Rotor Aerial Vehicles (MRAVs) using Free-Space Optical (FSO) links. The scenario involves MRAVs equipped with body-fixed optical transmitters and Unmanned Ground Vehicles (UGVs) acting as mobile relays, each outfitted with fixed conical Field-of-View (FoV) receivers. The controller integrates optical connectivity constraints into the NMPC formulation to ensure beam alignment and minimum link quality, while also enabling UGV tracking and obstacle avoidance. The method supports both coplanar and tilted MRAV configurations. MATLAB simulations demonstrate its feasibility and effectiveness.

cs.RO↗

arXiv2025

Survey of Simulators for Aerial Robots: An Overview and In-Depth Systematic Comparisons

Uncrewed Aerial Vehicle (UAV) research faces challenges with safety, scalability, costs, and ecological impact when conducting hardware testing. High-fidelity simulators offer a vital solution by replicating real-world conditions to enable the development and evaluation of novel perception and control algorithms. However, the large number of available simulators poses a significant challenge for researchers to determine which simulator best suits their specific use-case, based on each simulator's limitations and customization readiness. In this paper we present an overview of 44 UAV simulators, including in-depth, systematic comparisons for 14 of the simulators. Additionally, we present a set of decision factors for selection of simulators, aiming to enhance the efficiency and safety of research endeavors.

cs.RO↗

arXiv2025

Robust Planning and Control of Omnidirectional MRAVs for Aerial Communications in Wireless Networks

A new class of Multi-Rotor Aerial Vehicles (MRAVs), known as omnidirectional MRAVs (o-MRAVs), has gained attention for their ability to independently control 3D position and orientation. This capability enhances robust planning and control in aerial communication networks, enabling more adaptive trajectory planning and precise antenna alignment without additional mechanical components. These features are particularly valuable in uncertain environments, where disturbances such as wind and interference affect communication stability. This paper examines o-MRAVs in the context of robust aerial network planning, comparing them with the more common under-actuated MRAVs (u-MRAVs). Key applications, including physical layer security, optical communications, and network densification, are highlighted, demonstrating the potential of o-MRAVs to improve reliability and efficiency in dynamic communication scenarios.

cs.RO↗

arXiv2025

A Signal Temporal Logic Approach for Task-Based Coordination of Multi-Aerial Systems: a Wind Turbine Inspection Case Study

The paper addresses task assignment and trajectory generation for collaborative inspection missions using a fleet of multi-rotors, focusing on the wind turbine inspection scenario. The proposed solution enables safe and feasible trajectories while accommodating heterogeneous time-bound constraints and vehicle physical limits. An optimization problem is formulated to meet mission objectives and temporal requirements encoded as Signal Temporal Logic (STL) specifications. Additionally, an event-triggered replanner is introduced to address unforeseen events and compensate for lost time. Furthermore, a generalized robustness scoring method is employed to reflect user preferences and mitigate task conflicts. The effectiveness of the proposed approach is demonstrated through MATLAB and Gazebo simulations, as well as field multi-robot experiments in a mock-up scenario.

cs.RO↗

arXiv2025

Task Coordination and Trajectory Optimization for Multi-Aerial Systems via Signal Temporal Logic: A Wind Turbine Inspection Study

This paper presents a method for task allocation and trajectory generation in cooperative inspection missions using a fleet of multirotor drones, with a focus on wind turbine inspection. The approach generates safe, feasible flight paths that adhere to time-sensitive constraints and vehicle limitations by formulating an optimization problem based on Signal Temporal Logic (STL) specifications. An event-triggered replanning mechanism addresses unexpected events and delays, while a generalized robustness scoring method incorporates user preferences and minimizes task conflicts. The approach is validated through simulations in MATLAB and Gazebo, as well as field experiments in a mock-up scenario.

cs.RO↗

arXiv2024

Reshaping UAV-Enabled Communications with Omnidirectional Multi-Rotor Aerial Vehicles

A new class of Multi-Rotor Aerial Vehicles (MRAVs), known as omnidirectional MRAVs (o-MRAVs), has attracted significant interest in the robotics community. These MRAVs have the unique capability of independently controlling their 3D position and 3D orientation. In the context of aerial communication networks, this translates into the ability to control the position and orientation of the antenna mounted on the MRAV without any additional devices tasked for antenna orientation. This additional Degrees of Freedom (DoF) adds a new dimension to aerial communication systems, creating various research opportunities in communications-aware trajectory planning and positioning. This paper presents this new class of MRAVs and discusses use cases in areas such as physical layer security and optical communications. Furthermore, the benefits of these MRAVs are illustrated with realistic simulation scenarios. Finally, new research problems and opportunities introduced by this advanced robotics technology are discussed.

cs.RO↗

arXiv2024

Harnessing the Potential of Omnidirectional Multi-Rotor Aerial Vehicles in Cooperative Jamming Against Eavesdropping

Recent research in communications-aware robotics has been propelled by advancements in 5G and emerging 6G technologies. This field now includes the integration of Multi-Rotor Aerial Vehicles (MRAVs) into cellular networks, with a specific focus on under-actuated MRAVs. These vehicles face challenges in independently controlling position and orientation due to their limited control inputs, which adversely affects communication metrics such as Signal-to-Noise Ratio. In response, a newer class of omnidirectional MRAVs has been developed, which can control both position and orientation simultaneously by tilting their propellers. However, exploiting this capability fully requires sophisticated motion planning techniques. This paper presents a novel application of omnidirectional MRAVs designed to enhance communication security and thwart eavesdropping. It proposes a strategy where one MRAV functions as an aerial Base Station, while another acts as a friendly jammer to secure communications. This study is the first to apply such a strategy to MRAVs in scenarios involving eavesdroppers.

cs.RO↗

arXiv2024

Integrating Power-to-Heat Services in Geographically Distributed Multi-Energy Systems: A Case Study from the ERIGrid 2.0 Project

This paper investigates the integration and validation of multi-energy systems within the H2020 ERIGrid 2.0 project, focusing on the deployment of the JaNDER software middleware and universal API (uAPI) to establish a robust, high-data-rate, and low-latency communication link between Research Infrastructures (RIs). The middleware facilitates seamless integration of RIs through specifically designed transport layers, while the uAPI provides a simplified and standardized interface to ease deployment. A motivating case study explores the provision of power-to-heat services in a local multi-energy district, involving laboratories in Denmark, Greece, Italy, the Netherlands, and Norway, and analyzing their impact on electrical and thermal networks. This paper not only demonstrates the practical application of Geographically Distributed Simulations and Hardware-in-the-Loop technologies but also highlights their effectiveness in enhancing system flexibility and managing grid dynamics under various operational scenarios.

cs.DC↗

arXiv2024

PACNav: Enhancing Collective Navigation for UAV Swarms in Communication-Challenged Environments

This article presents Persistence Administered Collective Navigation (PACNav) as an approach for achieving decentralized collective navigation of Unmanned Aerial Vehicle (UAV) swarms. The technique is inspired by the flocking and collective navigation behavior observed in natural swarms, such as cattle herds, bird flocks, and even large groups of humans. PACNav relies solely on local observations of relative positions of UAVs, making it suitable for large swarms deprived of communication capabilities and external localization systems. We introduce the novel concepts of path persistence and path similarity, which allow each swarm member to analyze the motion of others. PACNav is grounded on two main principles: (1) UAVs with little variation in motion direction exhibit high path persistence and are considered reliable leaders by other UAVs; (2) groups of UAVs that move in a similar direction demonstrate high path similarity, and such groups are assumed to contain a reliable leader. The proposed approach also incorporates a reactive collision avoidance mechanism to prevent collisions with swarm members and environmental obstacles. The method is validated through simulated and real-world experiments conducted in a natural forest.

cs.RO↗

arXiv2024

Omnidirectional Multi-Rotor Aerial Vehicle Pose Optimization: A Novel Approach to Physical Layer Security

The integration of Multi-Rotor Aerial Vehicles (MRAVs) into 5G and 6G networks enhances coverage, connectivity, and congestion management. This fosters communication-aware robotics, exploring the interplay between robotics and communications, but also makes the MRAVs susceptible to malicious attacks, such as jamming. One traditional approach to counter these attacks is the use of beamforming on the MRAVs to apply physical layer security techniques. In this paper, we explore pose optimization as an alternative approach to countering jamming attacks on MRAVs. This technique is intended for omnidirectional MRAVs, which are drones capable of independently controlling both their position and orientation, as opposed to the more common underactuated MRAVs whose orientation cannot be controlled independently of their position. In this paper, we consider an omnidirectional MRAV serving as a Base Station (BS) for legitimate ground nodes, under attack by a malicious jammer. We optimize the MRAV pose (i.e., position and orientation) to maximize the minimum Signal-to-Interference-plus-Noise Ratio (SINR) over all legitimate nodes.

cs.RO↗

arXiv2023

Automating Bird Diverter Installation through Multi-Aerial Robots and Signal Temporal Logic Specifications

This paper tackles the task assignment and trajectory generation problem for bird diverter installation using a fleet of multi-rotors. The proposed motion planner considers payload capacity, recharging constraints, and utilizes Signal Temporal Logic (STL) specifications for encoding mission objectives and temporal requirements. An event-based replanning strategy is introduced to handle unexpected failures and ensure operational continuity. An energy minimization term is also employed to implicitly save multi-rotor flight time during installation. Simulations in MATLAB and Gazebo, as well as field experiments, demonstrate the effectiveness and validity of the approach in a mock-up scenario.

cs.RO↗