arXiv subjects

Giuseppe Tagliavini

Publications and source records attributed to Giuseppe Tagliavini.

22 records · Page 2Linked to original sources

arXiv2020

Enabling Mixed-Precision Quantized Neural Networks in Extreme-Edge Devices

The deployment of Quantized Neural Networks (QNN) on advanced microcontrollers requires optimized software to exploit digital signal processing (DSP) extensions of modern instruction set architectures (ISA). As such, recent research proposed optimized libraries for QNNs (from 8-bit to 2-bit) such as CMSIS-NN and PULP-NN. This work presents an extension to the PULP-NN library targeting the acceleration of mixed-precision Deep Neural Networks, an emerging paradigm able to significantly shrink the memory footprint of deep neural networks with negligible accuracy loss. The library, composed of 27 kernels, one for each permutation of input feature maps, weights, and output feature maps precision (considering 8-bit, 4-bit and 2-bit), enables efficient inference of QNN on parallel ultra-low-power (PULP) clusters of RISC-V based processors, featuring the RV32IMCXpulpV2 ISA. The proposed solution, benchmarked on an 8-cores GAP-8 PULP cluster, reaches peak performance of 16 MACs/cycle on 8 cores, performing 21x to 25x faster than an STM32H7 (powered by an ARM Cortex M7 processor) with 15x to 21x better energy efficiency.

cs.AR↗

arXiv2020

Energy-Efficient Hardware-Accelerated Synchronization for Shared-L1-Memory Multiprocessor Clusters

The steeply growing performance demands for highly power- and energy-constrained processing systems such as end-nodes of the internet-of-things (IoT) have led to parallel near-threshold computing (NTC), joining the energy-efficiency benefits of low-voltage operation with the performance typical of parallel systems. Shared-L1-memory multiprocessor clusters are a promising architecture, delivering performance in the order of GOPS and over 100 GOPS/W of energy-efficiency. However, this level of computational efficiency can only be reached by maximizing the effective utilization of the processing elements (PEs) available in the clusters. Along with this effort, the optimization of PE-to-PE synchronization and communication is a critical factor for performance. In this work, we describe a light-weight hardware-accelerated synchronization and communication unit (SCU) for tightly-coupled clusters of processors. We detail the architecture, which enables fine-grain per-PE power management, and its integration into an eight-core cluster of RISC-V processors. To validate the effectiveness of the proposed solution, we implemented the eight-core cluster in advanced 22nm FDX technology and evaluated performance and energy-efficiency with tunable microbenchmarks and a set of real-life applications and kernels. The proposed solution allows synchronization-free regions as small as 42 cycles, over 41 times smaller than the baseline implementation based on fast test-and-set access to L1 memory when constraining the microbenchmarks to 10% synchronization overhead. When evaluated on the real-life DSP-applications, the proposed SCU improves performance by up to 92% and 23% on average and energy efficiency by up to 98% and 39% on average.

cs.AR↗

arXiv2020

Combining Learning and Optimization for Transprecision Computing

The growing demands of the worldwide IT infrastructure stress the need for reduced power consumption, which is addressed in so-called transprecision computing by improving energy efficiency at the expense of precision. For example, reducing the number of bits for some floating-point operations leads to higher efficiency, but also to a non-linear decrease of the computation accuracy. Depending on the application, small errors can be tolerated, thus allowing to fine-tune the precision of the computation. Finding the optimal precision for all variables in respect of an error bound is a complex task, which is tackled in the literature via heuristics. In this paper, we report on a first attempt to address the problem by combining a Mathematical Programming (MP) model and a Machine Learning (ML) model, following the Empirical Model Learning methodology. The ML model learns the relation between variables precision and the output error; this information is then embedded in the MP focused on minimizing the number of bits. An additional refinement phase is then added to improve the quality of the solution. The experimental results demonstrate an average speedup of 6.5\% and a 3\% increase in solution quality compared to the state-of-the-art. In addition, experiments on a hardware platform capable of mixed-precision arithmetic (PULPissimo) show the benefits of the proposed approach, with energy savings of around 40\% compared to fixed-precision.

cs.DC↗

arXiv2017

A Transprecision Floating-Point Platform for Ultra-Low Power Computing

In modern low-power embedded platforms, floating-point (FP) operations emerge as a major contributor to the energy consumption of compute-intensive applications with large dynamic range. Experimental evidence shows that 50% of the energy consumed by a core and its data memory is related to FP computations. The adoption of FP formats requiring a lower number of bits is an interesting opportunity to reduce energy consumption, since it allows to simplify the arithmetic circuitry and to reduce the memory bandwidth between memory and registers by enabling vectorization. From a theoretical point of view, the adoption of multiple FP types perfectly fits with the principle of transprecision computing, allowing fine-grained control of approximation while meeting specified constraints on the precision of final results. In this paper we propose an extended FP type system with complete hardware support to enable transprecision computing on low-power embedded processors, including two standard formats (binary32 and binary16) and two new formats (binary8 and binary16alt). First, we introduce a software library that enables exploration of FP types by tuning both precision and dynamic range of program variables. Then, we present a methodology to integrate our library with an external tool for precision tuning, and experimental results that highlight the clear benefits of introducing the new formats. Finally, we present the design of a transprecision FP unit capable of handling 8-bit and 16-bit operations in addition to standard 32-bit operations. Experimental results on FP-intensive benchmarks show that up to 90% of FP operations can be safely scaled down to 8-bit or 16-bit formats. Thanks to precision tuning and vectorization, execution time is decreased by 12% and memory accesses are reduced by 27% on average, leading to a reduction of energy consumption up to 30%.

cs.AR↗