Searcharxiv⌕ Search

arXiv subjects

Glen White

Publications and source records attributed to Glen White.

13 recordsLinked to original sources
arXiv2024

Correlations between X-rays, Visible Light and Drive-Beam Energy Loss Observed in Plasma Wakefield Acceleration Experiments at FACET-II

This study documents several correlations observed during the first run of the plasma wakefield acceleration experiment E300 conducted at FACET-II, using a single drive electron bunch. The established correlations include those between the measured maximum energy loss of the drive electron beam and the integrated betatron x-ray signal, the calculated total beam energy deposited in the plasma and the integrated x-ray signal, among three visible light emission measuring cameras, and between the visible plasma light and x-ray signal. The integrated x-ray signal correlates almost linearly with both the maximum energy loss of the drive beam and the energy deposited into the plasma, demonstrating its usability as a measure of energy transfer from the drive beam to the plasma. Visible plasma light is found to be a useful indicator of the presence of wake at three locations that overall are two meters apart. Despite the complex dynamics and vastly different timescales, the x-ray radiation from the drive bunch and visible light emission from the plasma may prove to be effective non-invasive diagnostics for monitoring the energy transfer from the beam to the plasma in future high-repetition-rate experiments.

physics.plasm-ph↗
arXiv2023

Beam Delivery and Beamstrahlung Considerations for Ultra-High Energy Linear Colliders

As part of the Snowmass'21 community planning excercise, the Advanced Accelerator Concepts (AAC) community proposed future linear colliders with center-of-mass energies up to 15 TeV and luminosities up to 50$\times10^{34}$ cm$^{-2}$s$^{-1}$ in a compact footprint. In addition to being compact, these machines must also be energy efficient. We identify two challenges that must be addressed in the design of these machines. First, the Beam Delivery System (BDS) must not add significant length to the accelerator complex. Second, beam parameters must be chosen to mitigate beamstrahlung effects and maximize the luminosity-per-power of the machine. In this paper, we review advances in plasma lens technology that will help to reduce the length of the BDS system and we detail new Particle-in-Cell simulation studies that will provide insight into beamstrahlung mitigation techniques. We apply our analysis to both $e^+e^-$ and $γγ$ colliders.

physics.acc-ph↗
arXiv2022

C$^3$ Demonstration Research and Development Plan

C$^3$ is an opportunity to realize an e$^+$e$^-$ collider for the study of the Higgs boson at $\sqrt{s} = 250$ GeV, with a well defined upgrade path to 550 GeV while staying on the same short facility footprint. C$^3$ is based on a fundamentally new approach to normal conducting linear accelerators that achieves both high gradient and high efficiency at relatively low cost. Given the advanced state of linear collider designs, the key system that requires technical maturation for C$^3$ is the main linac. This white paper presents the staged approach towards a facility to demonstrate C$^3$ technology with both Direct (source and main linac) and Parallel (beam delivery, damping ring, ancillary component) R&D. The white paper also includes discussion on the approach for technology industrialization, related HEP R&D activities that are enabled by C$^3$ R&D, infrastructure requirements and siting options.

physics.acc-ph↗
arXiv2022

XCC: An X-ray FEL-based $γγ$ Collider Higgs Factory

This report describes the design of a $γγ$ Higgs factory in which 62.8 GeV electron beams collide with 1 keV X-ray free electron laser (XFEL) beams to produce colliding beams of 62.5 GeV photons. The Higgs boson production rate is 34,000 Higgs bosons per $10^7$ second year, roughly the same as the ILC Higgs rate. The electron accelerator is based on cold copper distributed coupling (C$^3$) accelerator technology. The 0.7 J pulse energy of the XFEL represents a 300-fold increase over the pulse energy of current soft x-ray FEL's. Design challenges are discussed, along with the R\&D to address them, including demonstrators.

hep-ex↗
arXiv2022

PetaVolts per meter Plasmonics: Snowmass21 White Paper

Plasmonic modes offer the potential to achieve PetaVolts per meter fields, that would transform the current paradigm in collider development in addition to non-collider searches in fundamental physics. PetaVolts per meter plasmonics relies on collective oscillations of the free electron Fermi gas inherent in the conduction band of materials that have a suitable combination of constituent atoms and ionic lattice structure. As the conduction band free electron density, at equilibrium, can be as high as $\rm 10^{24}cm^{-3}$, electromagnetic fields of the order of $\rm 0.1 \sqrt{\rm n_0(10^{24}cm^{-3})} ~ PVm^{-1}$ can be sustained by plasmonic modes. Engineered materials not only allow highly tunable material properties but quite critically make it possible to overcome disruptive instabilities that dominate the interactions in bulk media. Due to rapid shielding by the free electron Fermi gas, dielectric effects are strongly suppressed. Because the ionic lattice, the corresponding electronic energy bands and the free electron gas are governed by quantum mechanical effects, comparisons with plasmas are merely notional. Based on this framework, it is critical to address various challenges that underlie PetaVolts per meter plasmonics including stable excitation of plasmonic modes while accounting for their effects on the ionic lattice and the electronic energy band structure over femtosecond timescales. We summarize the ongoing theoretical and experimental efforts as well as map out strategies for the future. Extreme plasmonic fields can shape the future by not only bringing tens of TeV to multi-PeV center-of-mass-energies within reach but also by opening novel pathways in non-collider HEP. In view of this promise, we invite the scientific community to help realize the immense potential of PV/m plasmonics and call for significant expansion of the US and international R\&D program.

physics.acc-ph↗
arXiv2021

C$^3$: A "Cool" Route to the Higgs Boson and Beyond

We present a proposal for a cold copper distributed coupling accelerator that can provide a rapid route to precision Higgs physics with a compact 8 km footprint. This proposal is based on recent advances that increase the efficiency and operating gradient of a normal conducting accelerator. This technology also provides an $e^{+}e^{-}$ collider path to physics at multi-TeV energies. In this article, we describe our vision for this technology and the near-term R&D program needed to pursue it.

hep-ex↗
arXiv2021

Terawatt attosecond X-ray source driven by a plasma accelerator

Plasma accelerators can generate ultra high brightness electron beams which open the door to light sources with smaller physical footprint and properties un-achievable with conventional accelerator technology. In this paper we show that electron beams from Plasma WakeField Accelerators (PWFAs) can generate few-cycle coherent tunable soft X-ray pulses with TW peak power and a duration of tens of attoseconds, an order of magnitude more powerful, shorter and with better stability than state-of-the-art X-ray Free Electron Lasers (XFELs). Such a light source would significantly enhance the ability to experimentally investigate electron dynamics on ultrafast timescales, having broad-ranging impact across multiple scientific fields. Rather than starting from noise as in typical XFELs, the X-rays emission in this approach is driven by coherent radiation from a pre-bunched, near Mega Ampere (MA) current electron beam of attosecond duration. This relaxes the restrictive tolerances which have hindered progress towards utilizing plasma accelerators as coherent X-ray drivers thus far, presenting a new paradigm for advanced-accelerator light source applications.

physics.acc-ph↗
arXiv2021

MP3 White Paper 2021 -- Research Opportunities Enabled by Co-locating Multi-Petawatt Lasers with Dense Ultra-Relativistic Electron Beams

Novel emergent phenomena are expected to occur under conditions exceeding the QED critical electric field, where the vacuum becomes unstable to electron-positron pair production. The required intensity to reach this regime, $\sim10^{29}\,\mathrm{Wcm^{-2}}$, cannot be achieved even with the most intense lasers now being planned/constructed without a sizeable Lorentz boost provided by interactions with ultrarelativistic particles. Seeded laser-laser collisions may access this strong-field QED regime at laser intensities as low as $\sim10^{24}\,\mathrm{Wcm^{-2}}$. Counterpropagating e-beam--laser interactions exceed the QED critical field at still lower intensities ($\sim10^{20}\,\mathrm{Wcm^{-2}}$ at $\sim10\,\mathrm{GeV}$). Novel emergent phenomena are predicted to occur in the "QED plasma regime", where strong-field quantum and collective plasma effects play off one another. Here the electron beam density becomes a decisive factor. Thus, the challenge is not just to exceed the QED critical field, but to do so with high quality, approaching solid-density electron beams. Even though laser wakefield accelerators (LWFA) represent a very promising research field, conventional accelerators still provide orders of magnitude higher charge densities at energies $\gtrsim10\,\mathrm{GeV}$. Co-location of extremely dense and highly energetic electron beams with a multi-petawatt laser system would therefore enable seminal research opportunities in high-field physics and laboratory astrophysics. This white paper elucidates the potential scientific impact of multi-beam capabilities that combine a multi-PW optical laser, high-energy/density electron beam, and high-intensity x rays and outlines how to achieve such capabilities by co-locating a 3-10 PW laser with a state-of-the-art linear accelerator.

physics.plasm-ph↗
arXiv2020

On Seminal HEDP Research Opportunities Enabled by Colocating Multi-Petawatt Laser with High-Density Electron Beams

The scientific community is currently witnessing an expensive and worldwide race to achieve the highest possible light intensity. Within the next decade this effort is expected to reach nearly $10^{24}\,\mathrm{W}/\mathrm{cm^2}$ in the lab frame by focusing of 100 PW, near-infrared lasers. A major driving force behind this effort is the possibility to study strong-field vacuum breakdown and an accompanying electron-positron pair plasma via a quantum electrodynamic (QED) cascade [Edwin Cartlidge, "The light fantastic", Science 359, 382 (2018)]. Whereas Europe is focusing on all-optical 10 PW-class laser facilities (e.g., Apollon and ELI), China is already planning on co-locating a 100 PW laser system with a 25 keV superconducting XFEL and thus implicitly also a high-quality electron beam [Station of Extreme Light (SEL) at the Shanghai Superintense-Ultrafast Lasers Facility (SULF)]. This white paper elucidates the seminal scientific opportunities facilitated by colliding dense, multi-GeV electron beams with multi-PW optical laser pulses. Such a multi-beam facility would enable the experimental exploration of extreme HEDP environments by generating electron-positron pair plasmas with unprecedented densities and temperatures, where the interplay between strong-field quantum and collective plasma effects becomes decisive.

physics.plasm-ph↗
arXiv2019

Simulation of Muon Background at the ILC

Beginning with the first linear collider, SLC at SLAC, it was quickly discovered that high energy muons that are produced in halo collimators in the beam delivery system can cause a significant background in the experiment detector. Following publication of the ILC Technical Design Report, May 2013 [1] a simulation of this background has been made using simulation codes MUCARLO and GEANT4. It became clear that to mitigate this background, various magnetic devices were going to be needed.

physics.acc-ph↗
arXiv2018

Ultra-Short-Z Linear Collider Parameters

Interest in highly-compressed electron beams has been increasing in recent times, driven by the study of non-linear and even non-perturbative aspects of QED [2]. The FACET-II [7] facility at SLAC is currently (at the time of writing) being constructed and has been predicted to be able to deliver unprecedented peak beam intensities (>200 kA). We consider here what might be possible in pushing the bunch length compression to its limits at a future Linear Collider facility based on experience at FACET and ongoing photo-injector designs. We present an alternative electron-electron collision parameter table for ILC and CLIC colliders in which low charge, round beams with very short (<100nm) bunches are collided. The parameters shown present the possiblility to provide identical luminosities to the existing designs but with lower rf power requirements and/or with improved luminosity quality (fraction of luminosity close to energy peak). Achieving these beam parameters requires further R&D on the bunch compression and beam delivery systems associated with the Linear Colliders, which is discussed.

physics.acc-ph↗
arXiv2017

A Study of the Impact of Muons from the Beam Delivery System on the SiD Performance

To suppress the muon background arising from the Beam Delivery System (BDS) of the International Linear Collider (ILC), and to hinder it from reaching the interaction region, two different shielding scenarios are under discussion: five cylindrical muon spoilers with or without an additional magnetized shielding wall. Due to cost and safety issues, the scenario preferred by the Machine-Detector-Interface (MDI) group is to omit the shielding wall, although omitting it also has disadvantages. To support the decision making for the muon shielding, the impact of the muons from the two different shielding scenarios was studied in a full Geant4 detector simulation of the SiD detector, one of two proposed detectors for the ILC. Input to this study is the muon background created by the beam traveling through the BDS, which was simulated with MUCARLO.

physics.ins-det↗