Searcharxiv⌕ Search

arXiv subjects

Gonzalo Seco-Granados

Publications and source records attributed to Gonzalo Seco-Granados.

81 records · Page 5Linked to original sources

Tracking Position and Orientation through Millimeter Wave Lens MIMO in 5G Systems

Millimeter wave signals and large antenna arrays are considered enabling technologies for future 5G networks. Despite their benefits for achieving high data rate communications, their potential advantages for tracking of the location of the user terminals are largely undiscovered. In this paper, we propose a novel support detection-based channel training method for frequency selective millimeter-wave (mm-wave) multiple-input-multiple-output system with lens antenna arrays. We show that accurate position and orientation estimation and tracking is possible using signals from a single transmitter with lens antenna arrays. Particularly, the beamspace channel estimation is formulated as two sparse signal recovery problems in the downlink and uplink for the estimation of angle-of-arrival, angle-of-departure, and time-of-arrival. The proposed method offers a higher sparse detection probability compared to the compressed sensing based solutions. Finally, a joint heuristic beamformer design and user position and orientation tracking approach are proposed based on initial estimation of channel parameters obtained in the training phase.

cs.IT↗

Error Bounds for Uplink and Downlink 3D Localization in 5G mmWave Systems

Location-aware communication systems are expected to play a pivotal part in the next generation of mobile communication networks. Therefore, there is a need to understand the localization limits in these networks, particularly, using millimeter-wave technology (mmWave). Towards that, we address the uplink and downlink localization limits in terms of 3D position and orientation error bounds for mmWave multipath channels. We also carry out a detailed analysis of the dependence of the bounds of different systems parameters. Our key findings indicate that the uplink and downlink behave differently in two distinct ways. First of all, the error bounds have different scaling factors with respect to the number of antennas in the uplink and downlink. Secondly, uplink localization is sensitive to the orientation angle of the user equipment (UE), whereas downlink is not. Moreover, in the considered outdoor scenarios, the non-line-of-sight paths generally improve localization when a line-of-sight path exists. Finally, our numerical results show that mmWave systems are capable of localizing a UE with sub-meter position error, and sub-degree orientation error.

cs.IT↗

Position and Orientation Estimation through Millimeter Wave MIMO in 5G Systems

Millimeter wave signals and large antenna arrays are considered enabling technologies for future 5G networks. While their benefits for achieving high-data rate communications are well-known, their potential advantages for accurate positioning are largely undiscovered. We derive the Cramér-Rao bound (CRB) on position and rotation angle estimation uncertainty from millimeter wave signals from a single transmitter, in the presence of scatterers. We also present a novel two-stage algorithm for position and rotation angle estimation that attains the CRB for average to high signal-to-noise ratio. The algorithm is based on multiple measurement vectors matching pursuit for coarse estimation, followed by a refinement stage based on the space-alternating generalized expectation maximization algorithm. We find that accurate position and rotation angle estimation is possible using signals from a single transmitter, in either line-of- sight, non-line-of-sight, or obstructed-line-of-sight conditions.

cs.IT↗

Performance Bounds for Finite Moving Average Change Detection: Application to Global Navigation Satellite Systems

Due to the widespread deployment of Global Navigation Satellite Systems (GNSSs) for critical road or urban applications, one of the major challenges to be solved is the provision of integrity to terrestrial environments, so that GNSS may be safety used in these applications. To do so, the integrity of the received GNSS signal must be analyzed in order to detect some local effect disturbing the received signal. This is desirable because the presence of some local effect may cause large position errors, and hence compromise the signal integrity. Moreover, the detection of such disturbing effects must be done before some pre-established delay. This kind of detection lies within the field of transient change detection. In this work, a finite moving average stopping time is proposed in order to approach the signal integrity problem with a transient change detection framework. The statistical performance of this stopping time is investigated and compared, in the context of multipath detection, to other different methods available in the literature. Numerical results are presented in order to assess their performance.

cs.IT↗

Transmitter Beam Selection in Millimeter-wave MIMO with In-Band Position-Aiding

Emerging wireless communication systems will be characterized by a tight coupling between communication and positioning. This is particularly apparent in millimeter-wave (mm-wave) communications, where devices use a large number of antennas and the propagation is well described by geometric channel models. For mm-wave communications, initial access, consisting in the beam selection and alignment of two devices, is challenging and time-consuming in the absence of location information. Conversely, accurate positioning relies on high-quality communication links with proper beam alignment. This paper studies this interaction and proposes a new position-aided beam selection protocol, which considers the problem of joint communication and positioning in scenarios with direct line-of-sight and scattering. Simulation results show significant reductions in latency with respect to a standard protocol.

cs.IT↗

Optimal Design of Energy and Spectral Efficiency Tradeoff in One-Bit Massive MIMO Systems

This paper considers a single-cell massive multiple-input multiple-output (MIMO) system equipped with a base station (BS) that uses one-bit quantization and investigates the energy efficiency (EE) and spectral efficiency (SE) trade-off. We first propose a new precoding scheme and downlink power allocation strategy that results in uplink-downlink SINR duality for one-bit MIMO systems. Taking into account the effect of the imperfect channel state information, we obtain approximate closed-form expressions for the uplink and downlink achievable rates under duality with maximum ratio combining/matched-filter and zero-forcing processing. We then focus on joint optimization of the competing SE and EE objectives over the number of users, pilot training duration and operating power, using the weighted product method to obtain the EE/SE Pareto boundary. Numerical results are presented to verify our analytical resultsand demonstrate the fundamental tradeoff between EE and SE for different parameter settings.

cs.IT↗

Channel Estimation and Performance Analysis of One-Bit Massive MIMO Systems

This paper considers channel estimation and system performance for the uplink of a single-cell massive multiple-input multiple-output (MIMO) system. Each receive antenna of the base station (BS) is assumed to be equipped with a pair of one-bit analog-to-digital converters (ADCs) to quantize the real and imaginary part of the received signal. We first propose an approach for channel estimation that is applicable for both flat and frequency-selective fading, based on the Bussgang decomposition that reformulates the nonlinear quantizer as a linear functionwith identical first- and second-order statistics. The resulting channel estimator outperforms previously proposed approaches across all SNRs. We then derive closed-form expressions for the achievable rate in flat fading channels assuming low SNR and a large number of users for the maximal ratio and zero forcing receivers that takes channel estimation error due to both noise and one-bit quantization into account. The closed-form expressions in turn allow us to obtain insight into important system design issues such as optimal resource allocation, maximal sum spectral efficiency, overall energy efficiency, and number of antennas. Numerical results are presented to verify our analytical results and demonstrate the benefit of optimizing system performance accordingly.

cs.IT↗

Channel Estimation and Uplink Achievable Rates in One-Bit Massive MIMO Systems

This paper considers channel estimation and achievable rates for the uplink of a massive multiple-input multiple-output (MIMO) system where the base station is equipped with one-bit analog-to-digital converters (ADCs). By rewriting the nonlinear one-bit quantization using a linear expression, we first derive a simple and insightful expression for the linear minimum mean-square-error (LMMSE) channel estimator. Then employing this channel estimator, we derive a closed-form expression for the lower bound of the achievable rate for the maximum ratio combiner (MRC) receiver. Numerical results are presented to verify our analysis and show that our proposed LMMSE channel estimator outperforms the near maximum likelihood (nML) estimator proposed previously.

cs.IT↗

Closed-form approximations for the performance upper bound of inhomogeneous quadratic tests

This paper focuses on inhomogeneous quadratic tests, which involve the sum of a dependent non-central chi-square with a Gaussian random variable. Unfortunately, no closed-form expression is available for the statistical distribution of the resulting random variable, thus hindering the analytical characterization of these tests in terms of probability of detection and probability of false alarm. In order to circumvent this limitation, two closed-form approximations are proposed in this work based on results from Edgeworth series expansions and Extreme Value Theory (EVT). The use of these approximations is shown through a specific case of study in the context of integrity transient detection for Global Navigation Satellite Systems (GNSS). Numerical results are provided to assess the goodness of the proposed approximations, and to highlight their interest in real life applications.

stat.AP↗