arXiv subjects

Gordon J. Stacey

Publications and source records attributed to Gordon J. Stacey.

At least 19 recordsLinked to original sources

arXiv2026

CCAT: The Prime-Cam Instrument for the Fred Young Submillimeter Telescope -- Overview and Status

Prime-Cam is a first-generation science instrument for the CCAT Observatory's six-meter aperture Fred Young Submillimeter Telescope (FYST), under construction at an elevation of 5600 m on Cerro Chajnantor in Chile's Atacama Desert. Prime-Cam will deliver over ten times greater mapping speed at submillimeter wavelengths than current facilities for unprecedented broadband and spectroscopic measurements in windows between 1.4 -- 0.3 mm (220 -- 850 GHz). When fully populated, Prime-Cam will field over 100,000 kinetic inductance detectors across seven independently optimized instrument modules. With Prime-Cam, the CCAT Collaboration will address a suite of science goals, from Big Bang cosmology, to galaxy evolution and star formation over cosmic time. Prime-Cam is scheduled for integration in FYST in late 2026, followed by a year of early science observations with the 280 and 350 GHz instrument modules. We discuss the design and in-lab testing of the 1.8-m diameter Prime-Cam receiver and 280 GHz instrument module, and give an update on deployment status and early science plans.

astro-ph.IM↗

arXiv2025

CCAT: Optical Responsivity, Noise, and Readout Optimization of KIDs for Prime-Cam

The Prime-Cam instrument on the Fred Young Submillimeter Telescope (FYST) at the CCAT Observatory will conduct sensitive millimeter to submillimeter surveys for a range of astrophysical and cosmological sciences. Prime-Cam will use kinetic inductance detectors (KIDs) sensitive to multiple frequency bands spanning 280-850 GHz. With over 100,000 sensors under development, these KID arrays will soon form the largest submillimeter focal plane ever built. With fixed microwave tones probing amplitude and phase modulations in the KIDs due to incoming radiation, challenges arise in determining the optimal readout settings, especially under varying atmospheric loading. Realizing the science goals of FYST requires operating the detectors at optimal performance and determining accurate responsivities, which depend on readout tone placement and power. To address these challenges, we present laboratory measurements of sample pixels from the 280 GHz TiN and Al arrays using a blackbody cold load to simulate observing conditions. These measurements probe detector responsivity and noise across varying optical loading, tone power, and tone placement, providing the foundation to guide in situ calibration and operation of the >100,000 KIDs. We characterize detector sensitivity via the Noise Equivalent Power (NEP) as a function of readout tone power and placement, and measure the impact of detuning due to varying optical power on the NEP. Our test setup and methodology will inform the commissioning of Prime-Cam, in situ detector calibration procedures, the cadence of probe tone resetting, and potential design refinements for future arrays, supporting FYST's planned first light in 2026.

astro-ph.IM↗

arXiv2025

Extraplanar [C II] and Halpha in the Edge-On Galaxy NGC 5775

Spiral galaxies are thin and susceptible to being disrupted vertically. The largest star clusters, and nuclear starbursts, generate enough energy from winds and supernovae to send disk material to the halo. % METHODS Observations of edge-on galaxies allow for the clearest view of vertical disruptions. We present new observations of the nearby, edge-on galaxy NGC 5775 with SOFIA [C II] 157.7 micron and archival images from Hubble in Halpha to search for extraplanar gas. The extraplanar [C II] extends 2 kpc from the midplane over much of the star-forming disk. The extraplanar [C II] at 2 kpc from the midplane approximately follows the rotation of the disk, with a lag of approximately 40 km/s; this lag is similar to what has been previously reported in Halpha. Significant vertical extensions (to 3 kpc) are seen on the northeast side of the galaxy, potentially due to super star clusters in the NGC 5775 disk combined with gravitational interaction with the companion galaxy NGC 5774. The Halpha narrow-band image reveals a narrow plume that extends 7 kpc from the nucleus and is almost exactly perpendicular to the disk. The plume shape is similar to that seen from the comparable galaxy NGC 3628 and may arise from the nuclear starburst. Alternatively, the Halpha plume could be a relic of past activity.

astro-ph.GA↗

arXiv2024

CCAT: Nonlinear effects in 280 GHz aluminum kinetic inductance detectors

Prime-Cam, a first-generation science instrument for the Atacama-based Fred Young Submillimeter Telescope, is being built by the CCAT Collaboration to observe at millimeter and submillimeter wavelengths using kinetic inductance detectors (KIDs). Prime-Cam's 280 GHz instrument module will deploy with two aluminum-based KID arrays and one titanium nitride-based KID array, totaling approximately 10,000 detectors at the focal plane, all of which have been fabricated and are currently undergoing testing. One complication of fielding large arrays of KIDs under dynamic loading conditions is tuning the detector tone powers to maximize signal-to-noise while avoiding bifurcation due to the nonlinear kinetic inductance. For aluminum-based KIDs, this is further complicated by additional nonlinear effects which couple tone power to resonator quality factors and resonant frequencies. While both nonequilibrium quasiparticle dynamics and two-level system fluctuations have been shown to give rise to qualitatively similar distortions, modeling these effects alongside nonlinear kinetic inductance is inefficient when fitting thousands of resonators on-sky with existing models. For this reason, it is necessary to have a detailed understanding of the nonlinear effects across relevant detector loading conditions, including how they impact on on-sky noise and how to diagnose the detector's relative performance. We present a study of the competing nonlinearities seen in Prime-Cam's 280 GHz aluminum KIDs, with a particular emphasis on the resulting distortions to the resonator line shape and how these impact detector parameter estimation.

astro-ph.IM↗

arXiv2024

A benchmark for extreme conditions of the multiphase interstellar medium in the most luminous hot dust-obscured galaxy at z = 4.6

WISE J224607.6-052634.9 (W2246-0526) is a hot dust-obscured galaxy at $z$ = 4.601, and the most luminous obscured quasar known to date. W2246-0526 harbors a heavily obscured supermassive black hole that is most likely accreting above the Eddington limit. We present observations with the Atacama Large Millimeter/submillimeter Array (ALMA) in seven bands, including band 10, of the brightest far-infrared (FIR) fine-structure emission lines of this galaxy: [OI]$_{63μm}$, [OIII]$_{88μm}$, [NII]$_{122μm}$, [OI]$_{145μm}$, [CII]$_{158μm}$, [NII]$_{205μm}$, [CI]$_{370μm}$, and [CI]$_{609μm}$. A comparison of the data to a large grid of Cloudy radiative transfer models reveals that a high hydrogen density ($n_{H}\sim3\times10^3$ cm$^{-3}$) and extinction ($A_{V}\sim300$ mag), together with extreme ionization ($log(U)=-0.5$) and a high X-ray to UV ratio ($α_{ox}\geq-0.8$) are required to reproduce the observed nuclear line ratios. The values of $α_{ox}$ and $U$ are among the largest found in the literature and imply the existence of an X-ray-dominated region (XDR). In fact, this component explains the a priori very surprising non-detection of the [OIII]$_{88μm}$ emission line, which is actually suppressed, instead of boosted, in XDR environments. Interestingly, the best-fitted model implies higher X-ray emission and lower CO content than what is detected observationally, suggesting the presence of a molecular gas component that should be further obscuring the X-ray emission over larger spatial scales than the central region that is being modeled. These results highlight the need for multiline infrared observations to characterize the multiphase gas in high redshift quasars and, in particular, W2246-0526 serves as an extreme benchmark for comparisons of interstellar medium conditions with other quasar populations at cosmic noon and beyond.

astro-ph.GA↗

arXiv2022

CCAT-prime: RFSoC Based Readout for Frequency Multiplexed Kinetic Inductance Detectors

The Prime-Cam instrument on the Fred Young Submillimeter Telescope (FYST) is expected to be the largest deployment of millimeter and submillimeter sensitive kinetic inductance detectors to date. To read out these arrays efficiently, a microwave frequency multiplexed readout has been designed to run on the Xilinx Radio Frequency System on a Chip (RFSoC). The RFSoC has dramatically improved every category of size, weight, power, cost, and bandwidth over the previous generation readout systems. We describe a baseline firmware design which can read out four independent RF networks each with 500 MHz of bandwidth and 1000 detectors for ~30 W. The overall readout architecture is a combination of hardware, gateware/firmware, software, and network design. The requirements of the readout are driven by the 850 GHz instrument module of the 7-module Prime-Cam instrument. These requirements along with other constraints which have led to critical design choices are highlighted. Preliminary measurements of the system phase noise and dynamic range are presented.

astro-ph.IM↗

arXiv2022

CCAT-prime: Characterization of the First 280 GHz MKID Array for Prime-Cam

The Prime-Cam receiver on the Fred Young Submillimeter Telescope for the CCAT-prime project aims to address important astrophysical and cosmological questions with sensitive broadband, polarimetric, and spectroscopic measurements. The primary frequency bands in development include 280, 350, and 850 GHz for the polarization-sensitive broadband channels and 210--420 GHz for the spectrometers. Microwave kinetic inductance detectors (MKIDs) are a natural choice of detector technology for the simplicity in multiplexed readout needed for large format arrays at these high frequencies. We present here the initial lab characterization of the feedhorn-coupled 280 GHz polarimetric MKID array, and outline the plans for the subsequent MKID arrays and the development of the testbed to characterize them.

astro-ph.IM↗

arXiv2022

CCAT-prime: Design of the Mod-Cam receiver and 280 GHz MKID instrument module

Mod-Cam is a first light and commissioning instrument for the CCAT-prime project's six-meter aperture Fred Young Submillimeter Telescope (FYST), currently under construction at 5600 m on Cerro Chajnantor in Chile's Atacama Desert. Prime-Cam, a first-generation science instrument for FYST, will deliver over ten times greater mapping speed than current and near-term facilities for unprecedented 280-850 GHz broadband and spectroscopic measurements with microwave kinetic inductance detectors (MKIDs). CCAT-prime will address a suite of science goals, from Big Bang cosmology to star formation and galaxy evolution over cosmic time. Mod-Cam deployment on FYST with a 280 GHz instrument module containing MKID arrays is planned for early science observations in 2024. Mod-Cam will be used to test instrument modules for Prime-Cam, which can house up to seven instrument modules. We discuss the design and status of the 0.9 m diameter, 1.8 m long Mod-Cam receiver and 40 cm diameter 280 GHz instrument module, with cold stages at 40 K, 4 K, 1 K, and 100 mK. We also describe the instrument module's cryogenic readout designs to enable the readout of more than 10,000 MKIDs across 18 networks.

astro-ph.IM↗

arXiv2022

CCAT-prime: The Design and Characterization of the Silicon Mirrors for the Fabry-Perot Interferometer in the Epoch of Reionization Spectrometer

The Epoch of Reionization Spectrometer (EoR-Spec) is one of the instrument modules to be installed in the Prime-Cam receiver of the Fred Young Submillimeter Telescope (FYST). This six-meter aperture telescope will be built on Cerro Chajnantor in the Atacama Desert in Chile. EoR-Spec is designed to probe early star-forming regions by measuring the [CII] fine-structure lines between redshift z = 3.5 and z = 8 using the line intensity mapping technique. The module is equipped with a scanning Fabry-Perot interferometer (FPI) to achieve the spectral resolving power of about RP = 100. The FPI consists of two parallel and identical, highly reflective mirrors with a clear aperture of 14 cm, forming a resonating cavity called etalon. The mirrors are silicon-based and patterned with double-layer metamaterial anti-reflection coatings (ARC) on one side and metal mesh reflectors on the other. The double-layer ARCs ensure a low reflectance at one substrate surface and help tailor the reflectance profile over the FPI bandwidth. Here we present the design, fabrication processes, test setup, and characterization of silicon mirrors for the FPI.

astro-ph.IM↗

arXiv2021

Molecular Gas Excitation of the Massive Dusty Starburst CRLE and the Main-Sequence Galaxy HZ10 at z=5.7 in the COSMOS Field

We report CO(5$\rightarrow$4) and CO(6$\rightarrow$5) line observations in the dusty starbursting galaxy CRLE ($z = 5.667$) and the main-sequence (MS) galaxy HZ10 ($z = 5.654$) with the Northern Extended Millimeter Array (NOEMA). CRLE is the most luminous $z>5$ starburst in the COSMOS field and HZ10 is the most gas-rich "normal" galaxy currently known at $z>5$. We find line luminosities for CO(5$\rightarrow$4) and CO(6$\rightarrow$5) of (4.9 $\pm$ 0.5) and (3.8 $\pm$ 0.4) $\times$ 10$^{10}$ K km s$^{-1}$ pc$^{2}$ for CRLE and upper limits of $< 0.76$ and $< 0.60$ $\times$ 10$^{10}$ K km s$^{-1}$ pc$^{2}$ for HZ10, respectively. The CO excitation of CRLE appears comparable to other $z>5$ dusty star-forming galaxies (DSFGs). For HZ10, these line luminosity limits provide the first significant constraints of this kind for a MS galaxy at $z > 5$. We find the upper limit of $L'_{5\rightarrow4}/L'_{2\rightarrow1}$ in HZ10 could be similar to the average value for MS galaxies around $z\approx 1.5$, suggesting that MS galaxies with comparable gas excitation may already have existed one billion years after the Big Bang. For CRLE we determine the most likely values for the H$_2$ density, kinetic temperature and dust temperature based on excitation modeling of the CO line ladder. We also derive a total gas mass of $(7.1 \pm 1.3) \times 10^{10} M_\odot$. Our findings provide some of the currently most detailed constraints on the gas excitation that sets the conditions for star formation in a galaxy protocluster environment at $z > 5$.

astro-ph.GA↗

arXiv2021

CCAT-prime: Designs and status of the first light 280 GHz MKID array and Mod-Cam receiver

The CCAT-prime project's first light array will be deployed in Mod-Cam, a single-module testbed and first light cryostat, on the Fred Young Submillimeter Telescope (FYST) in Chile's high Atacama desert in late 2022. FYST is a six-meter aperture telescope being built on Cerro Chajnantor at an elevation of 5600 meters to observe at millimeter and submillimeter wavelengths.1 Mod-Cam will pave the way for Prime-Cam, the primary first generation instrument, which will house up to seven instrument modules to simultaneously observe the sky and study a diverse set of science goals from monitoring protostars to probing distant galaxy clusters and characterizing the cosmic microwave background (CMB). At least one feedhorn-coupled array of microwave kinetic inductance detectors (MKIDs) centered on 280 GHz will be included in Mod-Cam at first light, with additional instrument modules to be deployed along with Prime-Cam in stages. The first 280 GHz detector array was fabricated by the Quantum Sensors Group at NIST in Boulder, CO and includes 3,456 polarization-sensitive MKIDs. Current mechanical designs allow for up to three hexagonal arrays to be placed in each single instrument module. We present details on this first light detector array, including mechanical designs and cold readout plans, as well as introducing Mod-Cam as both a testbed and predecessor to Prime-Cam.

astro-ph.IM↗

arXiv2020

Extraplanar gas in Edge-on Galaxies traced by SOFIA observations of [C II]

Bursts of localized star formation in galaxies can levitate material from their midplanes. Spiral galaxies that are edge-on allow clear distinction of material that is levitated off the galaxies' midplanes. We used SOFIA to measure the vertical distribution of [C II] 157.7 micron line emission for two nearby, edge-on galaxies, NGC 891 and NGC 5907. We find that for the central region and actively-star-forming regions in the northern portion of NGC 891, and for NGC 5907, a thin (0.3 kpc) disk is supplemented by a thick disk with an exponential scale height of about 2 kpc. The [C II] is far more extended than mid-infrared emission (0.1 kpc, tracing present-day massive star formation) but not as extended as the H I (100 kpc, tracing low-metallicity circum/inter-galactic matter). The extraplanar [C II] may arise in walls of chimneys that connect the disk to the halo.

astro-ph.GA↗

arXiv2020

HAWC+ Far-Infrared Observations of the Magnetic Field Geometry in M51 and NGC 891

SOFIA HAWC+ polarimetry at $154~\micron$ is reported for the face-on galaxy M51 and the edge-on galaxy NGC 891. For M51, the polarization vectors generally follow the spiral pattern defined by the molecular gas distribution, the far-infrared (FIR) intensity contours, and other tracers of star formation. The fractional polarization is much lower in the FIR-bright central regions than in the outer regions, and we rule out loss of grain alignment and variations in magnetic field strength as causes. When compared with existing synchrotron observations, which sample different regions with different weighting, we find the net position angles are strongly correlated, the fractional polarizations are moderately correlated, but the polarized intensities are uncorrelated. We argue that the low fractional polarization in the central regions must be due to significant numbers of highly turbulent segments across the beam and along lines of sight in the beam in the central 3 kpc of M51. For NGC 891, the FIR polarization vectors within an intensity contour of 1500 $\rm{MJy~sr^{-1}}$ are oriented very close to the plane of the galaxy. The FIR polarimetry is probably sampling the magnetic field geometry in NGC 891 much deeper into the disk than is possible with NIR polarimetry and radio synchrotron measurements. In some locations in NGC 891 the FIR polarization is very low, suggesting we are preferentially viewing the magnetic field mostly along the line of sight, down the length of embedded spiral arms. There is tentative evidence for a vertical field in the polarized emission off the plane of the disk.

astro-ph.GA↗

arXiv2020

Sensitivity of the Prime-Cam Instrument on the CCAT-prime Telescope

CCAT-prime is a new 6 m crossed Dragone telescope designed to characterize the Cosmic Microwave Background (CMB) polarization and foregrounds, measure the Sunyaev-Zel'dovich effects of galaxy clusters, map the [CII] emission intensity from the Epoch of Reionization (EoR), and monitor accretion luminosity over multi-year timescales of hundreds of protostars in the Milky Way. CCAT-prime will make observations from a 5,600 m altitude site on Cerro Chajnantor in the Atacama Desert of northern Chile. The novel optical design of the telescope combined with high surface accuracy ($<$10 $μ$m) mirrors and the exceptional atmospheric conditions of the site will enable sensitive broadband, polarimetric, and spectroscopic surveys at sub-mm to mm wavelengths. Prime-Cam, the first light instrument for CCAT-prime, consists of a 1.8 m diameter cryostat that can house seven individual instrument modules. Each instrument module, optimized for a specific science goal, will use state-of-the-art kinetic inductance detector (KID) arrays operated at $\sim$100 mK, and Fabry-Perot interferometers (FPI) for the EoR science. Prime-Cam will be commissioned with staged deployments to populate the seven instrument modules. The full instrument will consist of 60,000 polarimetric KIDs at a combination of 220/280/350/410 GHz, 31,000 KIDS at 250/360 GHz coupled with FPIs, and 21,000 polarimetric KIDs at 850 GHz. Prime-Cam is currently being built, and the CCAT-prime telescope is designed and under construction by Vertex Antennentechnik GmbH to achieve first light in 2021. CCAT-prime is also a potential telescope platform for the future CMB Stage-IV observations.

astro-ph.IM↗

arXiv2019

Low star formation efficiency in typical galaxies at z=5-6

Using the VLA and ALMA, we have obtained CO(2-1), [C II], [N II] line emission and multiple dust continuum measurements in a sample of "normal" galaxies at $z=5-6$. We report the highest redshift detection of low-$J$ CO emission from a Lyman Break Galaxy, at $z\sim5.7$. The CO line luminosity implies a massive molecular gas reservoir of $(1.3\pm0.3)(α_{\rm CO}/4.5\,M_\odot$ (K km s$^{-1}$ pc$^2)^{-1})\times10^{11}\,M_\odot$, suggesting low star formation efficiency, with a gas depletion timescale of order $\sim$1 Gyr. This efficiency is much lower than traditionally observed in $z\gtrsim5$ starbursts, indicating that star forming conditions in Main Sequence galaxies at $z\sim6$ may be comparable to those of normal galaxies probed up to $z\sim3$ to-date, but with rising gas fractions across the entire redshift range. We also obtain a deep CO upper limit for a Main Sequence galaxy at $z\sim5.3$ with $\sim3$ times lower SFR, perhaps implying a high $α_{\rm CO}$ conversion factor, as typically found in low metallicity galaxies. For a sample including both CO targets, we also find faint [N II] 205$\,μ$m emission relative to [C II] in all but the most IR-luminous "normal" galaxies at $z=5-6$, implying more intense or harder radiation fields in the ionized gas relative to lower redshift. These radiation properties suggest that low metallicity may be common in typical $\sim$10$^{10}\,M_\odot$ galaxies at $z=5-6$. While a fraction of Main Sequence star formation in the first billion years may take place in conditions not dissimilar to lower redshift, lower metallicity may affect the remainder of the population.

astro-ph.GA↗

arXiv2018

SOFIA Far Infrared Imaging Polarimetry of M82 and NGC 253: Exploring the Super-Galactic Wind

We present Far-Infrared polarimetry observations of M82 at 53 and $154~μ\rm{m}$ and NGC 253 at $89~μ\rm{m}$, which were taken with HAWC+ in polarimetry mode on the Stratospheric Observatory for Infrared Astronomy (SOFIA). The polarization of M82 at $53~μ\rm{m}$ clearly shows a magnetic field geometry perpendicular to the disk in the hot dust emission. For M82 the polarization at $154~μ\rm{m}$ shows a combination of field geometry perpendicular to the disk in the nuclear region, but closer to parallel to the disk away from the nucleus. The fractional polarization at $53~μ\rm{m}$ $(154~μ\rm{m})$ ranges from 7% (3%) off nucleus to 0.5% (0.3%) near the nucleus. A simple interpretation of the observations of M82 invokes a massive polar outflow, dragging the field along, from a region $\sim 700$~pc in diameter that has entrained some of the gas and dust, creating a vertical field geometry seen mostly in the hotter $(53~μ\rm{m})$ dust emission. This outflow sits within a larger disk with a more typical planar geometry that more strongly contributes to the cooler $(154~μ\rm{m})$ dust emission. For NGC 253, the polarization at $89~μ\rm{m}$ is dominated by a planar geometry in the tilted disk, with weak indication of a vertical geometry above and below the plane from the nucleus. The polarization observations of NGC 253 at $53~μ\rm{m}$ were of insufficient S/N for detailed analysis.

astro-ph.GA↗

arXiv2018

CCAT-prime: a novel telescope for submillimeter astronomy

The CCAT-prime telescope is a 6-meter aperture, crossed-Dragone telescope, designed for millimeter and sub-millimeter wavelength observations. It will be located at an altitude of 5600 meters, just below the summit of Cerro Chajnantor in the high Atacama region of Chile. The telescope's unobscured optics deliver a field of view of almost 8 degrees over a large, flat focal plane, enabling it to accommodate current and future instrumentation fielding >100k diffraction-limited beams for wavelengths less than a millimeter. The mount is a novel design with the aluminum-tiled mirrors nested inside the telescope structure. The elevation housing has an integrated shutter that can enclose the mirrors, protecting them from inclement weather. The telescope is designed to co-host multiple instruments over its nominal 15 year lifetime. It will be operated remotely, requiring minimum maintenance and on-site activities due to the harsh working conditions on the mountain. The design utilizes nickel-iron alloy (Invar) and carbon-fiber-reinforced polymer (CFRP) materials in the mirror support structure, achieving a relatively temperature-insensitive mount. We discuss requirements, specifications, critical design elements, and the expected performance of the CCAT-prime telescope. The telescope is being built by CCAT Observatory, Inc., a corporation formed by an international partnership of universities. More information about CCAT and the CCAT-prime telescope can be found at www.ccatobservatory.org.

astro-ph.IM↗

arXiv2018

The optical design of the six-meter CCAT-prime and Simons Observatory telescopes

A common optical design for a coma-corrected, 6-meter aperture, crossed-Dragone telescope has been adopted for the CCAT-prime telescope of CCAT Observatory, Inc., and for the Large Aperture Telescope of the Simons Observatory. Both are to be built in the high altitude Atacama Desert in Chile for submillimeter and millimeter wavelength observations, respectively. The design delivers a high throughput, relatively flat focal plane, with a field of view 7.8 degrees in diameter for 3 mm wavelengths, and the ability to illuminate >100k diffraction-limited beams for < 1 mm wavelengths. The optics consist of offset reflecting primary and secondary surfaces arranged in such a way as to satisfy the Mizuguchi-Dragone criterion, suppressing first-order astigmatism and maintaining high polarization purity. The surface shapes are perturbed from their standard conic forms in order to correct coma aberrations. We discuss the optical design, performance, and tolerancing sensitivity. More information about CCAT-prime can be found at ccatobservatory.org and about Simons Observatory at simonsobservatory.org.

astro-ph.IM↗