arXiv subjects

Graham D. Bruce

Publications and source records attributed to Graham D. Bruce.

33 records · Page 2Linked to original sources

arXiv2020

Deep learning enabled laser speckle wavemeter with a high dynamic range

The speckle pattern produced when a laser is scattered by a disordered medium has recently been shown to give a surprisingly accurate or broadband measurement of wavelength. Here it is shown that deep learning is an ideal approach to analyse wavelength variations using a speckle wavemeter due to its ability to identify trends and overcome low signal to noise ratio in complex datasets. This combination enables wavelength measurement at high precision over a broad operating range in a single step, with a remarkable capability to reject instrumental and environmental noise, which has not been possible with previous approaches. It is demonstrated that the noise rejection capabilities of deep learning provide attometre-scale wavelength precision over an operating range from 488 nm to 976 nm. This dynamic range is six orders of magnitude beyond the state of the art.

physics.optics↗

arXiv2020

Through-Bottle Whisky Sensing and Classification using Raman Spectroscopy in an Axicon-Based Backscattering Configuration

Non-intrusive detection systems have the potential to characterise materials through various transparent glass and plastic containers. Food and drink adulteration is increasingly problematic, representing a serious health risk as well as an economic issue. This is of particular concern for alcoholic spirits such as Scotch whisky which are often targeted for fraudulent activity. We have developed a Raman system with a novel geometry of excitation and collection, exploiting the beam propagation from an axicon lens resulting in an annular beam that transforms to a Bessel illumination within the sample. This facilitates the efficient acquisition of Raman signals from the alcoholic spirit contained inside the bottle, while avoiding the collection of auto-fluorescence signals generated by the bottle wall. Therefore, this technique provides a way of non-destructive and non-contact detection to precisely analyse the contents without the requirement to open the bottle.

physics.ins-det↗

arXiv2020

Speckle-based determination of the polarisation state of single and multiple laser beams

Laser speckle is generated by the multiple interference of light through a disordered medium. Here we study the premise that the speckle pattern retains information about the polarisation state of the incident field. We analytically verify that a linear relation exists between the Stokes vector of the light and the resulting speckle pattern. As a result, the polarisation state of a beam can be measured from the speckle pattern using a transmission matrix approach. We perform a quantitative analysis of the accuracy of the transmission matrix method to measure randomly time-varying polarisation states. In experiment, we find that the Stokes parameters of light from a diode laser can be retrieved with an uncertainty of 0.05 using speckle images of 150$\times$150 pixels and 17 training states. We show both analytically and in experiment that this approach may be extended to the case of more than one laser field, demonstrating the measurement of the Stokes parameters of two laser beams simultaneously from a single speckle pattern and achieving the same uncertainty of 0.05.

physics.optics↗

arXiv2019

Femtometer-resolved simultaneous measurement of multiple laser wavelengths in a speckle wavemeter

Many areas of optical science require an accurate measurement of optical spectra. Devices based on laser speckle promise compact wavelength measurement, with attometer-level sensitivity demonstrated for single wavelength laser fields. The measurement of multimode spectra using this approach would be attractive, yet this is currently limited to picometer resolution. Here, we present a method to improve the resolution and precision of speckle-based multi-wavelength measurements. We measure multiple wavelengths simultaneously, in a device comprising a single 1 m-long step-index multimode fiber and a fast camera. Independent wavelengths separated by as little as 1 fm are retrieved with 0.2 fm precision using Principal Component Analysis. The method offers a viable way to measure sparse spectra containing multiple individual lines and is likely to find application in the tracking of multiple lasers in fields such as portable quantum technologies and optical telecommunications.

physics.optics↗

arXiv2019

High speed determination of laser wavelength using Poincaré descriptors of speckle

Laser speckle can provide a powerful tool that may be used for metrology, for example measurements of the incident laser wavelength with a resolution beyond that which may be achieved in a commercial device. However, to realise highest resolution requires advanced multi-variate analysis techniques, which limit the acquisition rate of such a wavemeter. Here we show an arithmetically simple method to measure wavelength changes with dynamic speckle, based on a Poincarè descriptor of the speckle pattern. We demonstrate the measurement of wavelength changes at femtometer-level with a measurement time reduced by two orders of magnitude compared to the previous state-of-the-art, which offers promise for applications such as speckle-based laser wavelength stabilisation.

physics.optics↗

arXiv2019

Overcoming the speckle correlation limit to achieve a fiber wavemeter with attometer resolution

The measurement of the wavelength of light using speckle is a promising tool for the realization of compact and precise wavemeters and spectrometers. However, the resolution of these devices is limited by strong correlations between the speckle patterns produced by closely-spaced wavelengths. Here, we show how principal component analysis of speckle images provides a route to overcome this limit. Using this, we demonstrate a compact wavemeter which measures wavelength changes of a stabilized diode laser of 5.3 am, eight orders of magnitude below the speckle correlation limit.

physics.optics↗

arXiv2017

Harnessing speckle for a sub-femtometre resolved broadband wavemeter and laser stabilization

The accurate determination and control of the wavelength of light is fundamental to many fields of science. Speckle patterns resulting from the interference of multiple reflections in disordered media are well-known to scramble the information content of light by complex but linear processes. However, these patterns are, in fact, exceptionally rich in information about the illuminating source. We use a fibre-coupled integrating sphere to generate wavelength-dependent speckle patterns, in combination with algorithms based on the transmission matrix method and principal component analysis, to realize a broadband and sensitive wavemeter. We demonstrate sub-femtometre wavelength resolution at a centre wavelength of 780 nm and a broad calibrated measurement range from 488 to 1064 nm. This is comparable with or exceeding the performance of conventional wavemeters. Using this speckle wavemeter as part of a feedback loop, we stabilize a 780 nm diode laser to achieve a linewidth better than 1 MHz.

physics.ins-det↗

arXiv2016

Measuring the Edwards-Anderson order parameter of the Bose glass: a quantum gas microscope approach

With the advent of spatially resolved fluorescence imaging in quantum gas microscopes, it is now possible to directly image glassy phases and probe the local effects of disorder in a highly controllable setup. Here we present numerical calculations using a spatially-resolved local mean-field theory, show that it captures the essential physics of the disordered system and use it to simulate the density distributions seen in single-shot fluorescence microscopy. From these simulated images we extract local properties of the phases which are measurable by a quantum gas microscope and show that unambiguous detection of the Bose glass is possible. In particular, we show that experimental determination of the Edwards-Anderson order parameter is possible in a strongly correlated quantum system using existing experiments. We also suggest modifications to the experiments which will allow further properties of the Bose glass to be measured.

cond-mat.quant-gas↗

arXiv2015

Single-atom imaging of fermions in a quantum-gas microscope

Single-atom-resolved detection in optical lattices using quantum-gas microscopes has enabled a new generation of experiments in the field of quantum simulation. Fluorescence imaging of individual atoms has so far been achieved for bosonic species with optical molasses cooling, whereas detection of fermionic alkaline atoms in optical lattices by this method has proven more challenging. Here we demonstrate single-site- and single-atom-resolved fluorescence imaging of fermionic potassium-40 atoms in a quantum-gas microscope setup using electromagnetically-induced-transparency cooling. We detected on average 1000 fluorescence photons from a single atom within 1.5s, while keeping it close to the vibrational ground state of the optical lattice. Our results will enable the study of strongly correlated fermionic quantum systems in optical lattices with resolution at the single-atom level, and give access to observables such as the local entropy distribution and individual defects in fermionic Mott insulators or anti-ferromagnetically ordered phases.

cond-mat.quant-gas↗

arXiv2015

Light-induced atomic desorption in a compact system for ultracold atoms

In recent years, light-induced atomic desorption (LIAD) of alkali atoms from the inner surface of a vacuum chamber has been employed in cold atom experiments for the purpose of modulating the alkali background vapour. This is beneficial because larger trapped atom samples can be loaded from vapour at higher pressure, after which the pressure is reduced to increase the lifetime of the sample. We present an analysis, based on the case of rubidium atoms adsorbed on pyrex, of various aspects of LIAD that are useful for this application. Firstly, we study the intensity dependence of LIAD by fitting the experimental data with a rate-equation model, from which we extract a correct prediction for the increase in trapped atom number. Following this, we quantify a figure of merit for the utility of LIAD in cold atom experiments and we show how it can be optimised for realistic experimental parameters.

cond-mat.quant-gas↗

arXiv2015

Multi-wavelength holography with a single Spatial Light Modulator for ultracold atom experiments

We demonstrate a method to create arbitrary intensity distributions of multiple wavelengths of light, which can be useful for ultracold atom experiments, by using regional phase-calculation algorithms to find a single hologram which is illuminated with overlapped laser beams. The regionality of the algorithms is used to program spatially distinct features in the calculated intensity distribution, which then overlap in the Fourier plane due to the dependence of diffraction angle on wavelength. This technique is easily integrated into cold atom experiments, requiring little optical access. We demonstrate the method and two possible experimental scenarios by generating light patterns with 670nm, 780nm and 1064nm laser light which are accurate to the level of a few percent.

cond-mat.quant-gas↗

arXiv2015

Measurement of Vacuum Pressure with a Magneto-Optical Trap: a Pressure-Rise Method

The lifetime of an atom trap is often limited by the presence of residual background gases in the vacuum chamber. This leads to the lifetime being inversely proportional to the pressure. Here we use this dependence to estimate the pressure and to obtain pressure rate-of-rise curves, which are commonly used in vacuum science to evaluate the performance of a system. We observe different rates of pressure increase in response to different levels of outgassing in our system. Therefore we suggest that this is a sensitive method which will be useful in applications of cold atom systems, in particular where the inclusion of a standard vacuum gauge is impractical.

physics.atom-ph↗

arXiv2014

Feedback-enhanced algorithm for aberration correction of holographic atom traps

We show that a phase-only spatial light modulator can be used to generate non-trivial light distributions suitable for trapping ultracold atoms, when the hologram calculation is included within a simple and robust feedback loop that corrects for imperfect device response and optical aberrations. This correction reduces the discrepancy between target and experimental light distribution to the level of a few percent (RMS error). We prove the generality of this algorithm by applying it to a variety of target light distributions of relevance for cold atomic physics.

cond-mat.quant-gas↗

arXiv2014

A conjugate gradient minimisation approach to generating holographic traps for ultracold atoms

Direct minimisation of a cost function can in principle provide a versatile and highly controllable route to computational hologram generation. However, to date iterative Fourier transform algorithms have been predominantly used. Here we show that the careful design of cost functions, combined with numerically efficient conjugate gradient minimisation, establishes a practical method for the generation of holograms for a wide range of target light distributions. This results in a guided optimisation process, with a crucial advantage illustrated by the ability to circumvent optical vortex formation during hologram calculation. We demonstrate the implementation of the conjugate gradient method for both discrete and continuous intensity distributions and discuss its applicability to optical trapping of ultracold atoms.

cond-mat.quant-gas↗

arXiv2011

Holographic power-law traps for the efficient production of Bose-Einstein condensates

We use a phase-only spatial light modulator to generate light distributions in which the intensity decays as a power law from a central maximum, with order ranging from 2 (parabolic) to 0.5. We suggest that a sequence of these can be used as a time-dependent optical dipole trap for all-optical production of Bose-Einstein condensates in two stages: efficient evaporative cooling in a trap with adjustable strength and depth, followed by an adiabatic transformation of the trap order to cross the BEC transition in a reversible way. Realistic experimental parameters are used to verify the capability of this approach in producing larger Bose-Einstein condensates than by evaporative cooling alone.

cond-mat.quant-gas↗