arXiv subjects

Graham Woan

Publications and source records attributed to Graham Woan.

At least 19 recordsLinked to original sources

arXiv2026

Signatures of photospheric convection throughout the solar atmosphere: the EVE Sun-as-a-star mHz continuum

Convectively driven motions in the solar photosphere can generate broadband Doppler variability across the chromosphere, transition region and corona. Here we investigate this variability using "Sun-as-a-Star" observations from the Extreme Ultraviolet Variability Experiment (EVE) aboard the Solar Dynamics Observatory, constructing high signal-to-noise Doppler power spectra from incoherently summed 3-hour sequences of the centroid wavelengths of emission lines that span wavelengths 35-104 nm. The spectra reveal a broad power-spectral continuum with two Harvey-like components, one of which extends to the Nyquist frequency at 50 mHz with a steep power-law tail. Lines formed in the corona, as compared with those of the chromosphere/transition region, have substantially less Doppler amplitude in the 5 mHz Harvey component associated with granulation-scale convection. Based on the observed continuum, there is no evidence (in any of the 26 lines studied) for Kolmogorov turbulence, which predicts a flat continuum component with Doppler variance ~ f^{-5/3) as a function of frequency f. The total inferred non-thermal RMS velocities (>0.1 mHz) are of order 15 km/s, consistent with previous coronal "microturbulence" estimates from non-thermal line widths. These observations provide the first clear detection of Sun-as-a-star EUV Doppler variability above about 10 mHz and demonstrate the potential of full-disk EUV spectroscopy to probe turbulent energy transport throughout the solar atmosphere.

astro-ph.SR↗

arXiv2026

GstLAL O4 Online Results Paper

Gravitational-wave observations of merging binary neutron stars and black holes are now routinely made by detectors in the Advanced LIGO-Virgo-KAGRA network. Neutron star binary systems may also produce detectable electromagnetic and particle emission over times scales ranging from seconds to years. Real-time gravitational-wave searches play a central role in enabling time-critical electromagnetic and/or neutrino follow-up observations. During the fourth observing run (O4) of the Advanced LIGO-Virgo-KAGRA network, multiple real-time searches operated continuously to identify candidate gravitational-wave events and publicly disseminate information about these discoveries. Here, the performance and results of the GstLAL real-time analysis are reported. The analysis is designed to identify candidates with low latency, high detection efficiency, and sustained operational uptime over long observing periods. Across O4, it produced initial candidate uploads with a median latency of 15.8 s while maintaining an effective uptime of 98% during the first two parts of the observing run. During the run, the analysis contributed to 250 candidates classified as astrophysically plausible, provided the first upload for 222 of these, and was the sole contributor for 75. Among Gravitational-Wave Transient Catalog events with a false-alarm rate below one per year, 88% were identified as significant in low latency and promoted for expert vetting and public dissemination. The low-latency astrophysical classifications agreed with the final catalog classifications for 93% of the events considered.

gr-qc↗

arXiv2025

The impact of missing data on the construction of LISA Time Delay Interferometry Michelson variables

We investigate the impact of missing input data on the construction of second-generation Time Delay Interferometry (TDI) variables, which enable data analysis for the Laser Interferometer Space Antenna (LISA). TDI relies on the introduction of precise time delays into the raw interferometric data streams before they are combined to suppress otherwise dominant laser phase noise. We show that a single missing sample, corresponding to 0.25 s of data, will result in an effective data gap of approximately 90 s in the second-generation TDI output if further measures are not taken. This additional gap is largely independent of the initial gap duration, but increases linearly with the order of the fractional-delay filter used for the computations. For a realistic gap scenario, incorporating both planned and unplanned data interruptions consistent with a target duty cycle of ~84%, we find that frequent, short-duration gaps (e.g., a total of 1000 per year, each of which have short durations ~ 100 s) could result in an additional loss in the TDI variables of about one day per year corresponding to a ~0.3% reduction in duty cycle. This amounts to a loss of approximately one day of LISA data suitable for the global-fit per year.

gr-qc↗

arXiv2024

Optimal design of interpolation methods for time-delay interferometry

Time-delay interferometry (TDI) suppresses laser frequency noise by forming linear combinations of time-shifted interferometric measurements. The time-shift operation is implemented by interpolating discretely sampled data. To enable in-band laser noise reduction by eight to nine orders of magnitude, interpolation has to be performed with high accuracy. Optimizing the design of those interpolation methods is the focus of this work. Previous research that studied constant time-shifts suggested Lagrange interpolation as the interpolation method for TDI. Its transfer function performs well at low frequency but requires a high number of coefficients. Furthermore, when applied in TDI we observed prominent time-domain features when a time-varying shift scanned over a pure integer sample shift. To limit this effect we identify an additional requirement for the interpolation kernel: when considering time-varying shifts the interpolation kernel must be sufficiently smooth to avoid unwanted time-domain transitions that produce glitch-like features in power spectral density estimates. The Lagrange interpolation kernel exhibits a discontinuous first derivative by construction, which is insufficient for the application to LISA or other space-based GW observatories. As a solution we propose a novel design method for interpolation kernels that respect a predefined requirement on in-band interpolation residuals and that possess continuous derivatives up to a prescribed order. Using this method we show that an interpolation kernel with 22 coefficients is sufficient to respect LISA's picometre-requirement and to allow for a continuous first derivative which suppresses the magnitude of the time-domain transition adequately. The reduction from 42 (Lagrange interpolation) to 22 coefficients enables us to save computational cost and increases robustness against artefacts in the data.

astro-ph.IM↗

arXiv2024

Premerger observation and characterization of massive black hole binaries

We demonstrate an end-to-end technique for observing and characterizing massive black hole binary signals before they merge with the LISA space-based gravitational-wave observatory. Our method uses a zero-latency whitening filter, originally designed for rapidly observing compact binary mergers in ground-based observatories, to be able to observe signals with no additional latency due to filter length. We show that with minimal computational cost, we are able to reliably observe signals as early as 14 days premerger as long as the signal has accrued a signal-to-noise ratio of at least 8 in the LISA data. We also demonstrate that this method can be used to characterize the source properties, providing early estimates of the source's merger time, chirp mass, and sky localization. Early observation and characterization of massive black holes is crucial to enable the possibility of rapid multimessenger observations, and to ensure that LISA can enter a protected operating period when the merger signal arrives.

hep-ex↗

arXiv2024

Reconstructing source motion from gravitational wave strain

Searches for un-modelled burst gravitational wave signals return potential candidates for short duration signals. As there is no clear model for the source in these searches, one needs to understand and reconstruct the system that produced the gravitational waves. Here we aim to reconstruct the source motion and masses of a system based only on its gravitational wave strain. We train a normalising flow on two models including circular orbits and random unphysical motion of two point masses. These models are used as a toy problem to illustrate the technique. We then reconstruct a distribution of possible motions of masses that can produce the given gravitational wave signal. We demonstrate the ability to reconstruct the full distribution of possible mass motions from strain data across multiple gravitational wave detectors. This distribution encompasses the degenerate motions that are expected to produce identical gravitational wave strains.

gr-qc↗

arXiv2024

An improved calendar ring hole-count for the Antikythera mechanism

We present a new analysis of the positions of holes beneath the calendar ring of the Antikythera mechanism, as measured by Budiselic et al. (2020). We significantly refine their estimate for the number of holes that were present in the full ring. Our $68\%$-credible estimate for this number, taking account of all the data, is $355.24^{ +1.39 }_{ -1.36 }$. If holes adjacent to fractures are removed from the analysis, our estimate becomes $354.08^{ +1.47}_{-1.41}$. A ring of 360 holes is strongly disfavoured, and one of 365 holes is not plausible, given our model assumptions.

physics.hist-ph↗

arXiv2023

End-to-end simulation and analysis pipeline for LISA

The data produced by the future space-based millihertz gravitational-wave detector LISA will require nontrivial pre-processing, which might affect the science results. It is crucial to demonstrate the feasibility of such processing algorithms and assess their performance and impact on the science. We are building an end-to-end pipeline that includes state-of-the-art simulations and noise reduction algorithms. The simulations must include a detailed model of the full measurement chain, capturing the main features that affect the instrument performance and processing algorithms. In particular, we include in these simulations, for the first time, proper relativistic treatment of reference frames with realistic numerically-optimized orbits; a model for onboard clocks and clock synchronization measurements; proper modeling of total laser frequencies, including laser locking, frequency planning and Doppler shifts; and a better treatment of onboard processing. Using these simulated data, we show that our pipeline is able to reduce the most critical noises and form synchronized observables. By injecting signals from a verification binary, we demonstrate that good parameter estimation can be obtained on this more realistic setup, extending existing results from previous LISA Data Challenges.

astro-ph.IM↗

arXiv2023

Search for Gravitational Waves from Scorpius X-1 in LIGO O3 Data With Corrected Orbital Ephemeris

Improved observational constraints on the orbital parameters of the low-mass X-ray binary Scorpius~X-1 were recently published in Killestein et al (2023). In the process, errors were corrected in previous orbital ephemerides, which have been used in searches for continuous gravitational waves from Sco~X-1 using data from the Advanced LIGO detectors. We present the results of a re-analysis of LIGO detector data from the third observing run of Advanced LIGO and Advanced Virgo using a model-based cross-correlation search. The corrected region of parameter space, which was not covered by previous searches, was about 1/3 as large as the region searched in the original O3 analysis, reducing the required computing time. We have confirmed that no detectable signal is present over a range of gravitational-wave frequencies from $25\textrm{Hz}$ to $1600\textrm{Hz}$, analogous to the null result of Abbott et al (2022). Our search sensitivity is comparable to that of Abbott et al (2022), who set upper limits corresponding, between $100\textrm{Hz}$ and $200\textrm{Hz}$, to an amplitude $h_0$ of about $10^{-25}$ when marginalized isotropically over the unknown inclination angle of the neutron star's rotation axis, or less than $4\times 10^{-26}$ assuming the optimal orientation.

astro-ph.HE↗

arXiv2022

Rapid determination of LISA sensitivity to extreme mass ratio inspirals with machine learning

Gravitational wave observations of the inspiral of stellar-mass compact objects into massive black holes (MBHs), extreme mass ratio inspirals (EMRIs), enable precision measurements of parameters such as the MBH mass and spin. The Laser Interferometer Space Antenna is expected to detect sufficient EMRIs to probe the underlying source population, testing theories of the formation and evolution of MBHs and their environments. Population studies are subject to selection effects that vary across the EMRI parameter space, which bias inference results if unaccounted for. This bias can be corrected, but evaluating the detectability of many EMRI signals is computationally expensive. We mitigate this cost by (i) constructing a rapid and accurate neural network interpolator capable of predicting the signal-to-noise ratio of an EMRI from its parameters, and (ii) further accelerating detectability estimation with a neural network that learns the selection function, leveraging our first neural network for data generation. The resulting framework rapidly estimates the selection function, enabling a full treatment of EMRI detectability in population inference analyses. We apply our method to an astrophysically motivated EMRI population model, demonstrating the potential selection biases and subsequently correcting for them. Accounting for selection effects, we predict that LISA will measure the MBH mass function slope to a precision of 8.8%, the CO mass function slope to a precision of 4.6%, the width of the MBH spin magnitude distribution to a precision of 10% and the event rate to a precision of 12% with EMRIs at redshifts below z=6.

astro-ph.HE↗

arXiv2022

Rapid parameter estimation for an all-sky continuous gravitational wave search using conditional varitational auto-encoders

All-sky searches for continuous gravitational waves are generally model dependent and computationally costly to run. By contrast, SOAP is a model-agnostic search that rapidly returns candidate signal tracks in the time-frequency plane. In this work we extend the SOAP search to return broad Bayesian posteriors on the astrophysical parameters of a specific signal model. These constraints drastically reduce the volume of parameter space that any follow-up search needs to explore, so increasing the speed at which candidates can be identified and confirmed. Our method uses a machine learning technique, specifically a conditional variational auto-encoder, and delivers a rapid estimation of the posterior distribution of the four Doppler parameters of a continuous wave signal. It does so without requiring a clear definition of a likelihood function, or being shown any true Bayesian posteriors in training. We demonstrate how the Doppler parameter space volume can be reduced by a factor of $\mathcal{O}(10^{-7})$ for signals of SNR 100.

astro-ph.IM↗

arXiv2020

A robust machine learning algorithm to search for continuous gravitational waves

Many continuous gravitational wave searches are affected by instrumental spectral lines that could be confused with a continuous astrophysical signal. Several techniques have been developed to limit the effect of these lines by penalising signals that appear in only a single detector. We have developed a general method, using a convolutional neural network, to reduce the impact of instrumental artefacts on searches that use the SOAP algorithm. The method can identify features in corresponding frequency bands of each detector and classify these bands as containing a signal, an instrumental line, or noise. We tested the method against four different data-sets: Gaussian noise with time gaps, data from the final run of Initial LIGO (S6) with signals added, the reference S6 mock data challenge data set and signals injected into data from the second advanced LIGO observing run (O2). Using the S6 mock data challenge data set and at a 1% false alarm probability we showed that at 95% efficiency a fully-automated SOAP search has a sensitivity corresponding to a coherent signal-to-noise ratio of 110, equivalent to a sensitivity depth of 10 Hz$^{-1/2}$, making this automated search competitive with other searches requiring significantly more computing resources and human intervention.

astro-ph.IM↗

arXiv2019

First search for long-duration transient gravitational waves after glitches in the Vela and Crab pulsars

Gravitational waves (GWs) can offer a novel window into the structure and dynamics of neutron stars. Here we present the first search for long-duration quasi-monochromatic GW transients triggered by pulsar glitches. We focus on two glitches observed in radio timing of the Vela pulsar (PSR J0835-4510) on 12 December 2016 and the Crab pulsar (PSR J0534+2200) on 27 March 2017, during the Advanced LIGO second observing run (O2). We assume the GW frequency lies within a narrow band around twice the spin frequency as known from radio observatons. Using the fully-coherent transient-enabled F-statistic method to search for transients of up to four months in length. We find no credible GW candidates for either target, and through simulated signal injections we set 90% upper limits on (constant) GW strain as a function of transient duration. For the larger Vela glitch, we come close to beating an indirect upper limit for when the total energy liberated in the glitch would be emitted as GWs, thus demonstrating that similar post-glitch searches at improved detector sensitivity can soon yield physical constraints on glitch models.

gr-qc↗

arXiv2019

SOAP: A generalised application of the Viterbi algorithm to searches for continuous gravitational-wave signals

All-sky and wide parameter space searches for continuous gravitational waves are generally template-matching schemes which test a bank of signal waveforms against data from a gravitational wave detector. Such searches can offer optimal sensitivity for a given computing cost and signal model, but are highly-tuned to specific signal types and are computationally expensive, even for semi-coherent searches. We have developed a search method based on the well-known Viterbi algorithm which is model-agnostic and has a computational cost several orders of magnitude lower than template methods, with a modest reduction in sensitivity. In particular, this method can search for signals which have an unknown frequency evolution. We test the algorithm on three simulated and real data sets: gapless Gaussian noise, Gaussian noise with gaps and real data from the final run of initial LIGO (S6). We show that at 95% efficiency, with a 1% false alarm rate, the algorithm has a depth sensitivity of $\sim 33$, $10$ and $13$ ,Hz$^{-1/2}$ with corresponding SNRs of $\sim 60$, $72$ and $74$ in these datasets. we discuss the use of this algorithm for detecting a wide range of quasi-monochromatic gravitational wave signals and instrumental lines.

astro-ph.IM↗

arXiv2017

A nested sampling code for targeted searches for continuous gravitational waves from pulsars

This document describes a code to perform parameter estimation and model selection in targeted searches for continuous gravitational waves from known pulsars using data from ground-based gravitational wave detectors. We describe the general workings of the code and characterise it on simulated data containing both noise and simulated signals. We also show how it performs compared to a previous MCMC and grid-based approach to signal parameter estimation. Details how to run the code in a variety of cases are provided in Appendix A.

gr-qc↗

arXiv2016

A targeted spectral interpolation algorithm for the detection of continuous gravitational waves

We present an improved method of targeting continuous gravitational-wave signals in data from the LIGO and Virgo detectors with a higher efficiency than the time-domain Bayesian pipeline used in many previous searches. Our spectral interpolation algorithm, SplInter, removes the intrinsic phase evolution of the signal from source rotation and relative detector motion. We do this in the frequency domain and generate a time series containing only variations in the signal due to the antenna pattern. Although less flexible than the classic heterodyne approach, SplInter allows for rapid analysis of putative signals from isolated (and some binary) pulsars, and efficient follow-up searches for candidate signals generated by other search methods. The computational saving over the heterodyne approach can be many orders of magnitude, up to a factor of around fifty thousand in some cases, with a minimal impact on overall sensitivity for most targets.

astro-ph.IM↗

arXiv2012

Managing Research Data in Big Science

The project which led to this report was funded by JISC in 2010--2011 as part of its 'Managing Research Data' programme, to examine the way in which Big Science data is managed, and produce any recommendations which may be appropriate. Big science data is different: it comes in large volumes, and it is shared and exploited in ways which may differ from other disciplines. This project has explored these differences using as a case-study Gravitational Wave data generated by the LSC, and has produced recommendations intended to be useful variously to JISC, the funding council (STFC) and the LSC community. In Sect. 1 we define what we mean by 'big science', describe the overall data culture there, laying stress on how it necessarily or contingently differs from other disciplines. In Sect. 2 we discuss the benefits of a formal data-preservation strategy, and the cases for open data and for well-preserved data that follow from that. This leads to our recommendations that, in essence, funders should adopt rather light-touch prescriptions regarding data preservation planning: normal data management practice, in the areas under study, corresponds to notably good practice in most other areas, so that the only change we suggest is to make this planning more formal, which makes it more easily auditable, and more amenable to constructive criticism. In Sect. 3 we briefly discuss the LIGO data management plan, and pull together whatever information is available on the estimation of digital preservation costs. The report is informed, throughout, by the OAIS reference model for an open archive.

astro-ph.IM↗

arXiv2011

Digital Preservation and Astronomy: Lessons for funders and the funded

Astronomy looks after its data better than most disciplines, and it is no coincidence that the consensus standard for the archival preservation of all types of digital assets -- the OAIS Reference Model -- emerged originally from the space science community. It is useful to highlight both what is different about astronomy (and indeed about Big Science in general), what could be improved, and what is exemplary, and in the process I will give a brief introduction to the framework of the OAIS model, and its useful conceptual vocabulary. I will illustrate this with a discussion of the spectrum of big-science data management practices from astronomy, through gravitational wave (GW) data, to particle physics.

astro-ph.IM↗