arXiv subjects

Gregory Quiroz

Publications and source records attributed to Gregory Quiroz.

At least 19 recordsLinked to original sources

arXiv2026

Satisfying Quantum Codes: Physics-Informed and Hardware-Aware Code Design with SAT Solvers

Although quantum error correction is widely believed to be necessary for impactful applications of quantum computers, the design of quantum error correction codes is largely done by hand, without respect to problem or hardware constraints. In this work, we present a highly general and flexible framework for the computational design of both physics-inspired and hardware-aware quantum codes. To do so, we formulate code design as a Boolean satisfiability (SAT) problem and show how to incorporate all required error correction criteria. We prove that code design is NP-complete, ruling out any efficient algorithm for designing codes in general. Nonetheless, we show that state-of-the-art SAT solvers are able to effectively find solutions for many practical problems. Notably, we are able to design physics-inspired codes with up to 100 physical qubits in minutes, and we design new hardware-aware codes for biased noise which have a lower logical error rate than state-of-the-art surface codes.

quant-ph↗

arXiv2026

Revealing Noise in Axial Motion Through Quantum Noise Spectroscopy on a Trapped Ion Processor

Native noise processes in quantum processors are often difficult to isolate because multiple error mechanisms contribute to the same measured loss of coherence. Here we use dephasing-robust quantum noise spectroscopy to identify and characterize control noise induced by axial motion in an individually-addressed trapped-ion processor. When the ion motion is transverse to the addressing beam, thermal axial motion couples to the beam profile and produces effective amplitude control noise. We show that this noise is governed primarily by the local beam curvature and appears as a low-frequency contribution to the reconstructed control-noise spectrum. By varying the ion position within the beam profile, we separate curvature-dependent axial-motion noise from curvature-independent native control noise and extract motional parameters that are otherwise difficult to access on this platform. We also apply the protocol in parallel to a four-ion register, demonstrating a spectroscopic method for simultaneous characterization of position-dependent control noise across multiple qubits. The results of this study identify beam inflection points as operating regions that suppress axial-motion-induced noise at the cost of reduced Rabi rate, as found in PRX Quantum 3, 010334 (2022).

quant-ph↗

arXiv2026

Entanglement Scaling and Problem Structure in Quantum Approximate and Adiabatic Optimization Algorithms

Entanglement is widely regarded as a key resource underlying the power of quantum algorithms and their potential to achieve quantum advantage. With the emergence of variational quantum algorithms, however, questions have arisen regarding how entanglement relates to problem structure and algorithmic performance in near-term quantum applications. Here, we examine this relationship through the Quantum Approximate Optimization Algorithm (QAOA), a specific class of variational algorithms, applied to the MaxCut problem. We show that suboptimal variational parameter training can significantly modify the observed entanglement profile, obscuring its scaling behavior. By employing a high-performance optimizer, we find empirical evidence that QAOA exhibits entanglement scaling consistent with that of fermionic Gaussian states (up to a scaling factor) across a broad range of MaxCut instances. We further compare these results with adiabatic quantum computation, observing annealing-schedule-dependent entanglement profiles whose scaling behavior differs markedly from that of QAOA. Together, these findings provide new insight into how entanglement manifests in and distinguishes these two algorithmic paradigms, highlighting its connection to both computational performance and problem structure.

quant-ph↗

arXiv2026

Assessing Spatiotemporally Correlated Noise in Superconducting Qubits via Pulse-Based Quantum Noise Spectroscopy

Spatiotemporally correlated errors are widespread in quantum devices and are particularly adversarial to error correcting schemes. To characterize these errors, we propose and validate a nonparametric quantum noise spectroscopy (QNS) protocol to estimate both spectra and static errors associated with spatiotemporally correlated dephasing noise and fluctuating quantum crosstalk on two qubits. Our scheme reconstructs the real and imaginary components of the two-qubit cross-spectrum by using fixed total time pulse sequences and single qubit and joint two-qubit measurements to separately resolve spatially correlated noise processes. We benchmark our protocol by reconstructing the spectra of spatiotemporally correlated noise processes engineered via the Schr\"{o}dinger Wave Autoregressive Moving Average technique, emulating dephasing errors. Furthermore, we show that the protocol can outperform existing comb-based QNS protocols. Our results demonstrate the utility of our protocol in characterizing spatiotemporally correlated noise and quantum crosstalk in a multi-qubit device for potential use in noise-adapted control or error protection schemes.

quant-ph↗

arXiv2026

Quantum Noise Suppression at Scale with Crosstalk-Robust Gate Sets

We introduce crosstalk-robust gate sets, which are obtained using a novel, scalable optimal control problem exploiting locality. Through the suppression of pairwise quantum crosstalk, the gate sets enable robustness that extends to multi-qubit circuits. The IBM Quantum Platform devices provide a testbed for our gate sets, where we study their efficacy via error suppression protocols and randomized parallel single-qubit circuits of up to eight qubits. Furthermore, we provide the first known assessment of the impact of complete optimal control gate sets on quantum algorithms. Using a Hamiltonian simulation of a four-qubit transverse field Ising model, we show that noise-informed gates enhance median algorithmic performance by a factor of four over baseline Gaussian gates using the same calibration procedures. Lastly, we provide numerical evidence that optimized gate sets enable larger qubit-qubit coupling strengths that can cut two-qubit gate times in half. This result confirms that hardware-software co-design using quantum optimal control can create new opportunities for quantum computing architectures.

quant-ph↗

arXiv2026

Towards Predictive Quantum Algorithmic Performance: Modeling Time-Correlated Noise at Scale

Combining tensor network techniques with quantum autoregressive moving average models, we quantify the effects of time-correlated noise on quantum algorithms and predict their performance at scale. As a paradigmatic test case, we examine the quantum Fourier transformation. Building on our first technical result, which shows how stochastic tensor network calculations capture frequency correlations, our second result is the revelation that infidelity exponents (scaling from diffuse, to superdiffuse) are determined by the spectral features of the noise. This numerical result rigorously quantifies the common belief that the temporal correlation scale is a key predictive feature of noise's deleterious impact on multi-qubit circuits. To highlight prospects for predicting algorithmic performance, our third result quantifies how infidelity scaling exponents -- which are fits determined by training data at moderate scales (40-80 qubits) -- can be used to predict more computationally expensive simulation at larger scales (100-128 qubits). Aside from highlighting the scalability of our methods, this workflow feeds into our last result, which is the proposal of predictive benchmarking protocols connecting simulations to experiments. Our work paves the way for large-scale algorithmic simulations and performance prediction under hardware-relevant noise conditions informed by realistic device characteristics.

quant-ph↗

arXiv2025

Quantum Optimization with Classical Chaos

The Quantum Approximate Optimization Algorithm (QAOA) is a powerful tool in solving various combinatorial problems such as Maximum Satisfiability and Maximum Cut. Hard computational problems, however, require deep circuits that place high demands on classical variational parameter optimization. Ultimately, this has necessitated investigations into alternative methods for effective QAOA parameterizations. Here, we study a parameterization scheme based on classical chaotic recursive mapping, which enables significant reductions in the scaling of the variational parameter space. Through numerical investigations of hard Maximum Satisfiability problems, we demonstrate that the chaotic mapping can effectively match the performance of standard QAOA when subject to a limited number of classical optimization iterations and short-depth circuits. Insight into this behavior is elucidated through the lens of classical dynamical systems and used to inform hybridized schemes that leverage both standard and chaotic parameterizations. It is shown that these hybridized approaches can boost QAOA performance beyond that of the standard approach alone, especially for deep circuits. Through this study, we provide a new perspective that introduces a generalized framework for specifying performant, dynamical-map-based QAOA parameterizations.

quant-ph↗

arXiv2025

Crosstalk-Robust Dynamical Decoupling for Bipartite-Topology Quantum Processors

We introduce a protocol that modifies dynamical decoupling (DD) sequences to be robust to static $ZZ$ crosstalk when implemented with bounded control on two-colorable qubit topologies. The protocol, which relies on modifications to the pulse timing, can be applied to any sequence with equidistant $\pi$-pulses. We motivate the method theoretically via suppression conditions identified through time-dependent perturbation theory. Theoretical findings are supported by demonstrations of widely studied sequences on several superconducting qubit devices offered by the IBM Quantum Platform. Using up to 20 qubits on fixed-coupler devices, we observe at least a $3\times$ improvement in the fidelity decay rate via our approach when compared to non-robust DD variants. In addition, we leverage our approach to assess the impact of $ZZ$ errors on tunable-coupler devices. We find that $ZZ$-robust sequences perform nearly equivalent to non-robust DD, affirming the reduced impact of such errors in a tunable-coupler architecture. Nevertheless, our demonstrations indicate that fixed-coupler devices, when subject to DD-protection, can outperform tunable-coupler devices. Our method broadens the scope of practical DD protocols: with modest overhead and a reasonable constraint on the qubit topology, the method attains significant performance improvements on modern quantum computing devices.

quant-ph↗

arXiv2025

Non-Markovian Noise in Symmetry-Preserving Quantum Dynamics

In quantum dynamics, symmetries are vital for identifying and assessing conserved quantities that govern the evolution of a quantum system. When promoted to the open quantum system setting, dynamical symmetries can be negatively altered by system-environment interactions, thus, complicating their analysis. Previous work on noisy symmetric quantum dynamics has focused on the Markovian setting, despite the ubiquity of non-Markovian noise in a number of widely used quantum technologies. In this Letter, we develop a framework for quantifying the impact of non-Markovian noise on symmetric quantum evolution via root space decompositions and the filter function formalism. We demonstrate analytically that symmetry-preserving noise maintains the symmetric subspace, while nonsymmetric noise leads to highly specific leakage errors that are block diagonal in the symmetry representation. We support our findings with numerical studies of a transverse-field Ising model and a quantum error detecting code subject to spatiotemporally correlated multiaxis noise. Our results are broadly applicable, providing new analytic insights into the control and characterization of open quantum system dynamics.

quant-ph↗

arXiv2024

Sparse Non-Markovian Noise Modeling of Transmon-Based Multi-Qubit Operations

The influence of noise on quantum dynamics is one of the main factors preventing current quantum processors from performing accurate quantum computations. Sufficient noise characterization and modeling can provide key insights into the effect of noise on quantum algorithms and inform the design of targeted error protection protocols. However, constructing effective noise models that are sparse in model parameters, yet predictive can be challenging. In this work, we present an approach for effective noise modeling of multi-qubit operations on transmon-based devices. Through a comprehensive characterization of seven devices offered by the IBM Quantum Platform, we show that the model can capture and predict a wide range of single- and two-qubit behaviors, including non-Markovian effects resulting from spatio-temporally correlated noise sources. The model's predictive power is further highlighted through multi-qubit dynamical decoupling demonstrations and an implementation of the variational quantum eigensolver. As a training proxy for the hardware, we show that the model can predict expectation values within a relative error of 0.5%; this is a 7$\times$ improvement over default hardware noise models. Through these demonstrations, we highlight key error sources in superconducting qubits and illustrate the utility of reduced noise models for predicting hardware dynamics.

quant-ph↗

arXiv2024

Model-Based Qubit Noise Spectroscopy

Qubit noise spectroscopy (QNS) is a valuable tool for both the characterization of a qubit's environment and as a precursor to more effective qubit control to improve qubit fidelities. Existing approaches to QNS are what the classical spectrum estimation literature would call "non-parametric" approaches, in that a series of probe sequences are used to estimate noise power at a set of points or bands. In contrast, model-based approaches to spectrum estimation assume additional structure in the form of the spectrum and leverage this for improved statistical accuracy or other capabilities, such as superresolution. Here, we derive model-based QNS approaches using inspiration from classical signal processing, primarily though the recently developed Schrodinger wave autoregressive moving-average (SchWARMA) formalism for modeling correlated noise. We show, through both simulation and experimental data, how these model-based QNS approaches maintain the statistical and computational benefits of their classical counterparts, resulting in powerful new estimation approaches. Beyond the direct application of these approaches to QNS and quantum sensing, we anticipate that the flexibility of the underlying models will find utility in adaptive feedback control for quantum systems, in analogy with their role in classical adaptive signal processing and control.

quant-ph↗

arXiv2024

Mitigating Errors in DC Magnetometry via Zero-Noise Extrapolation

Zero-noise extrapolation (ZNE), a technique to estimate quantum circuit expectation values through noise scaling and extrapolation, is well-studied in the context of quantum computing. We examine the applicability of ZNE to the field of quantum sensing. Focusing on the problem of DC magnetometry using the Ramsey protocol, we show that the sensitivity (in the sense of the minimum detectable signal) does not improve upon using ZNE in the slope detection scheme. On the other hand, signals of sufficiently large magnitude can be estimated more accurately. Our results are robust across various noise models and design choices for the ZNE protocols, including both single-qubit and multi-qubit entanglement-based sensing.

quant-ph↗

arXiv2024

Dynamically Generated Decoherence-Free Subspaces and Subsystems on Superconducting Qubits

Decoherence-free subspaces and subsystems (DFS) preserve quantum information by encoding it into symmetry-protected states unaffected by decoherence. An inherent DFS of a given experimental system may not exist; however, through the use of dynamical decoupling (DD), one can induce symmetries that support DFSs. Here, we provide the first experimental demonstration of DD-generated DFS logical qubits. Utilizing IBM Quantum superconducting processors, we investigate two and three-qubit DFS codes comprising up to six and seven noninteracting logical qubits, respectively. Through a combination of DD and error detection, we show that DFS logical qubits can achieve up to a 23% improvement in state preservation fidelity over physical qubits subject to DD alone. This constitutes a beyond-breakeven fidelity improvement for DFS-encoded qubits. Our results showcase the potential utility of DFS codes as a pathway toward enhanced computational accuracy via logical encoding on quantum processors.

quant-ph↗

arXiv2023

Dynamical decoupling for superconducting qubits: a performance survey

Dynamical Decoupling (DD) is perhaps the simplest and least resource-intensive error suppression strategy for improving quantum computer performance. Here we report on a large-scale survey of the performance of 60 different DD sequences from 10 families, including basic as well as advanced sequences with high order error cancellation properties and built-in robustness. The survey is performed using three different superconducting-qubit IBMQ devices, with the goal of assessing the relative performance of the different sequences in the setting of arbitrary quantum state preservation. We find that the high-order universally robust (UR) and quadratic DD (QDD) sequences generally outperform all other sequences across devices and pulse interval settings. Surprisingly, we find that DD performance for basic sequences such as CPMG and XY4 can be made to nearly match that of UR and QDD by optimizing the pulse interval, with the optimal interval being substantially larger than the minimum interval possible on each device.

quant-ph↗

arXiv2023

Quantum Control Noise Spectroscopy with Optimal Suppression of Dephasing

We extend quantum noise spectroscopy (QNS) of amplitude control noise to settings where dephasing noise or detuning errors make significant contributions to qubit dynamics. Previous approaches to characterize amplitude noise are limited by their vulnerability to low-frequency dephasing noise and static detuning errors, which can overwhelm the target control noise signal and introduce bias into estimates of the amplitude noise spectrum. To overcome this problem, we leverage optimal control to identify a family of amplitude control waveforms that optimally suppress low-frequency dephasing noise and detuning errors, while maintaining the spectral concentration in the amplitude filter essential for spectral estimation. The waveforms found via numerical optimization have surprisingly simple analytic forms, consisting of oscillating sine waves obeying particular amplitude and frequency constraints. In numerically simulated QNS experiments, these waveforms demonstrate superior robustness, enabling accurate estimation of the amplitude noise spectrum in regimes where existing approaches are biased by low-frequency dephasing noise and detuning errors.

quant-ph↗

arXiv2023

Optimally Band-Limited Noise Filtering for Single Qubit Gates

We introduce a quantum control protocol that produces smooth, experimentally implementable control sequences optimized to combat temporally correlated noise for single qubit systems. The control ansatz is specifically chosen to be a functional expansion of discrete prolate spheroidal sequences, a discrete time basis known to be optimally concentrated in time and frequency, and quite attractive when faced with experimental control hardware constraints. We leverage the filter function formalism to transform the control problem into a filter design problem, and show that the frequency response of a quantum system can be carefully tailored to avoid the most relevant dynamical contributions of noise processes. Using gradient ascent, we obtain optimized filter functions and exploit them to elucidate important details about the relationship between filter function design, control bandwidth, and noise characteristics. In particular, we identify regimes of optimal noise suppression and in turn, optimal control bandwidth directly proportional to the size of the frequency bands where the noise power is large. In addition to providing guiding principles for filter design, our approach enables the development of controls that simultaneously yield robust noise filtering and high fidelity single qubit logic operations in a wide variety of complex noise environments.

quant-ph↗

arXiv2022

Quantum Crosstalk Robust Quantum Control

The prevalence of quantum crosstalk in current quantum devices poses challenges for achieving high-fidelity quantum logic operations and reliable quantum processing. Through quantum control theory, we develop an analytical condition for achieving crosstalk-robust single-qubit control of multi-qubit systems. We examine the effects of quantum crosstalk via a cumulant expansion and develop a condition to suppress the leading order contributions to the dynamics. The efficacy of the condition is illustrated in the domains of quantum state preservation and noise characterization through the development of crosstalk-robust dynamical decoupling and quantum noise spectroscopy (QNS) protocols. Using the IBM Quantum Experience, crosstalk-robust state preservation is demonstrated on 27 qubits, where a $3\times$ improvement in coherence decay is observed for single-qubit product and multipartite entangled states. Through the use of noise injection, we experimentally demonstrate crosstalk-robust dephasing QNS on a seven qubit processor, where a $10^4$ improvement in reconstruction accuracy over ``cross-susceptible" alternatives is found. Together, these experiments highlight the significant impact the crosstalk mitigation condition can have on improving multi-qubit characterization and control on current quantum devices.

quant-ph↗

arXiv2022

Scalable Measurement Error Mitigation via Iterative Bayesian Unfolding

Measurement error mitigation (MEM) techniques are postprocessing strategies to counteract systematic read-out errors on quantum computers (QC). Currently used MEM strategies face a tradeoff: methods that scale well with the number of qubits return negative probabilities, while those that guarantee a valid probability distribution are not scalable. Here, we present a scheme that addresses both of these issues. In particular, we present a scalable implementation of iterative Bayesian unfolding, a standard mitigation technique used in high-energy physics experiments. We demonstrate our method by mitigating QC data from experimental preparation of Greenberger-Horne-Zeilinger (GHZ) states up to 127 qubits and implementation of the Bernstein-Vazirani algorithm on up to 26 qubits.

quant-ph↗