arXiv subjects

Gregory Yablonsky

Publications and source records attributed to Gregory Yablonsky.

8 recordsLinked to original sources

arXiv2026

Pulse-response analysis of a simple reaction-advection-diffusion equation

We analyze a reaction-advection-diffusion (RAD) equation arising in pulse-response studies of transport and reaction in a narrow reactor tube. A short pulse of gas is injected near one end of the reactor, while unreacted gas and reaction products are detected at the outlet. Particular attention is given to the effect of a constant axial advection velocity as a minimal extension of the standard diffusion model. For a single pulse, we obtain analytical expressions for the exit-flow response and for experimentally accessible characteristics, including its moments and peak properties, as functions of the P\'eclet number and the reaction rate. The corresponding diffusion-advection model without reaction defines a standard transport curve that may be used as a baseline for identifying chemical activity. For a first-order irreversible reaction, the reactive and nonreactive exit-flow curves satisfy a simple exponential factorization, allowing the reaction rate to be extracted directly from their ratio. We also extend the single-pulse analysis to a uniform periodic train of pulses. Using Poisson summation, we derive explicit expressions for the Fourier coefficients of the asymptotic periodic exit flow and relate them to the Laplace transform and moments of the single-pulse response. Finally, a stochastic interpretation in terms of reflected diffusion, first-passage times, and exponential killing provides probabilistic meaning for several of the analytical results and unifies the single-pulse, periodic-response, and reaction aspects of the model.

math.AP↗

arXiv2025

Statistical Distributions for Transient Transport

This paper introduces the use of statistical distributions based on transport differential equations for clear distinction of transport modes within transient kinetic experiments. More specifically,novel techniques are developed for the transient data obtained through the Temporal Analysis of Products (TAP) reactor. The methodology allows distinguishing between two domains of diffusion transport in heterogeneous catalytic systems, i.e., Knudsen and non-Knudsen diffusion, using statistical fingerprints, and finding the transition domain. Two distribution parameters were obtained that directly result in coefficients that correspond to the concentration and the rate of transport. Using a linear relationship between the rate and concentration coefficients, Knudsen diffusion is revealed when the rate of transport is constant and non-Knudsen diffusion is confirmed when the rate of transport coefficient is a function of the concentration coefficient. As a result, accurate transport information is obtained while in the presence of instrument drift or noise while investigating higher pressure pulse responses. As such, experiments where the influence of gas phase reactions can be more directly studied.

stat.AP↗

arXiv2024

Determination of output composition in reaction-advection-diffusion systems on network reactors

We consider reaction-transport processes in open reactors in which systems of first order reactions involving a number of gas species and solid catalysts can occur at localized active regions. Reaction products flow out of the reactor into vacuum conditions and are collected at an exit boundary. The output composition problem (OCP) is to determine the composition (molar fractions) of the collected gas after the reactor is fully emptied. We provide a solution to this problem in the form of a boundary-value problem for a system of time-independent partial differential equations. We then consider network-like reactors, which can be approximated by a network consisting of a collection of nodes and 1-dimensional branches, with reactions taking place at nodes. For these, it is possible to solve the OCP in a simple and effective way, giving explicit formulas for the output composition as a function of the reaction coefficients and parameters associated with the geometric configuration of the system. Several examples are given to illustrate the method.

physics.chem-ph↗

arXiv2023

Revisiting Maxwell-Smoluchowski theory: low surface roughness in straight channels

The Maxwell-Smoluchowski (MS) theory of gas diffusion is revisited here in the context of gas transport in straight channels in the Knudsen regime of large mean free path. This classical theory is based on a phenomenological model of gas-surface interaction that posits that a fraction $\vartheta$ of molecular collisions with the channel surface consists of diffuse collisions, i.e., the direction of post-collision velocities is distributed according to the Knudsen Cosine Law, and a fraction $1-\vartheta$ undergoes specular reflection. From this assumption one obtains the value $\mathcal{D}=\frac{2-\vartheta}{\vartheta}\mathcal{D}_K$ for the self-diffusivity constant, where $\mathcal{D}_K$ is a reference value corresponding to $\vartheta=1$. In this paper we show that $\vartheta$ can be expressed in terms of micro- and macro-geometric parameters for a model consisting of hard spheres colliding elastically against a rigid surface with prescribed microgeometry. Our refinement of the MS theory is based on the observation that the classical surface scattering operator associated to the microgeometry has a canonical velocity space diffusion approximation by a generalized Legendre differential operator whose spectral theory is known explicitly. More specifically, starting from an explicit description of the effective channel surface microgeometry -- a concept which incorporates both the actual surface microgeometry and the molecular radius -- and using this operator approximation, we show that $\vartheta$ can be resolved into easily obtained geometric parameters.

math.DS↗

arXiv2021

A Priori Calibration of Transient Kinetics Data via Machine Learning

The temporal analysis of products reactor provides a vast amount of transient kinetic information that may be used to describe a variety of chemical features including the residence time distribution, kinetic coefficients, number of active sites, and the reaction mechanism. However, as with any measurement device, the TAP reactor signal is convoluted with noise. To reduce the uncertainty of the kinetic measurement and any derived parameters or mechanisms, proper preprocessing must be performed prior to any advanced analysis. This preprocessing consists of baseline correction, i.e., a shift in the voltage response, and calibration, i.e., a scaling of the flux response based on prior experiments. The current methodology of preprocessing requires significant user discretion and reliance on previous experiments that may drift over time. Herein we use machine learning techniques combined with physical constraints to convert the raw instrument signal to chemical information. As such, the proposed methodology demonstrates clear benefits over the traditional preprocessing in the calibration of the inert and feed mixture products without need of prior calibration experiments or heuristic input from the user.

cs.LG↗

arXiv2021

Data Driven Reaction Mechanism Estimation via Transient Kinetics and Machine Learning

Understanding the set of elementary steps and kinetics in each reaction is extremely valuable to make informed decisions about creating the next generation of catalytic materials. With physical and mechanistic complexity of industrial catalysts, it is critical to obtain kinetic information through experimental methods. As such, this work details a methodology based on the combination of transient rate/concentration dependencies and machine learning to measure the number of active sites, the individual rate constants, and gain insight into the mechanism under a complex set of elementary steps. This new methodology was applied to simulated transient responses to verify its ability to obtain correct estimates of the micro-kinetic coefficients. Furthermore, experimental CO oxidation data was analyzed to reveal the Langmuir-Hinshelwood mechanism driving the reaction. As oxygen accumulated on the catalyst, a transition in the mechanism was clearly defined in the machine learning analysis due to the large amount of kinetic information available from transient reaction techniques. This methodology is proposed as a new data driven approach to characterize how materials control complex reaction mechanisms relying exclusively on experimental data.

stat.AP↗

arXiv2020

Kinetic Expression for Optimal Catalyst Electronic Configuration: The Case of Ammonia Decomposition

A new steady-state kinetic model of ammonia decomposition is presented and analyzed regarding the electronic properties of metal catalysts. The model is based on the classical Temkin-Ertl mechanism and modified in accordance with Wolkenstein electronic theory by implementing participation of free electrons of the catalyst to change the chemical nature of adsorbed species. Wolkenstein original theory only applied to semiconductors but by including the d-band model, the electronic theory can be extended to metals. For both simplified and full reaction mechanisms, including electronic steps, we present a steady-state rate equation where the dependence on the Fermi level of the metal creates a volcano-shaped dependence. According to the kinetic model, an increasing Fermi level of the catalyst, that approaching the antibonding state with adsorbed nitrogen molecules, will increase the fraction of neutral nitrogen molecules and enhance their the desorption. Concurrently, strong chemisorption of ammonia molecules proceeds easily through participation of additional free catalyst electrons in the adsorbate bond. As a result, the reaction rate is enhanced and reaches its maximum value. A further increasing Fermi level of the catalyst that approaches the antibonding state with ammonia molecules will result in a smaller fraction of negatively charged ammonia molecules and less dehydrogenation. Concurrently, the desorption of neutral nitrogen molecules occurs without impairment. As a result, the reaction rate decreases. The detailed kinetic model is compared to recent experimental measurements of ammonia decomposition on iron, cobalt and CoFe bimetallic catalysts.

physics.chem-ph↗

arXiv2015

Explicit formulas for reaction probability in reaction-diffusion experiments

A computational procedure is developed for determining the conversion probability for reaction-diffusion systems in which a first-order catalytic reaction is performed over active particles. We apply this general method to systems on metric graphs, which may be viewed as 1-dimensional approximations of 3-dimensional systems, and obtain explicit formulas for conversion. We then study numerically a class of 3-dimensional systems and test how accurately they are described by model formulas obtained for metric graphs. The optimal arrangement of active particles in a 1-dimensional multiparticle system is found, which is shown to depend on the level of catalytic activity: conversion is maximized for low catalytic activity when all particles are bunched together close to the point of gas injection, and for high catalytic activity when the particles are evenly spaced.

cond-mat.soft↗