arXiv subjects

Grigory Lihachev

Publications and source records attributed to Grigory Lihachev.

At least 19 recordsLinked to original sources

arXiv2025

Copper-impurity-free photonic integrated circuits enable deterministic soliton microcombs

Chip-scale optical frequency combs based on microresonators (microcombs) enable GHz-THz repetition rates, broad bandwidth, compactness, and compatibility with wafer-scale manufacturing. Silicon nitride photonic integrated circuits have become a leading platform due to their low loss, broad transparency, lithographic dispersion control, and commercial 200-mm-wafer foundry access. They have enabled system-level applications in optical communications, LiDAR, frequency synthesis, low-noise microwave generation, and convolutional processing. However, real-world deployment is hindered by the challenge of deterministic soliton microcomb generation, primarily due to thermal instabilities. Although techniques like pulsed pumping, fast scanning, and auxiliary lasers help mitigate these effects, they often add complexity or reduce soliton stability. In this work, we overcome thermal limitations and demonstrate deterministic soliton generation in silicon nitride photonic circuits. We trace the thermal effects to copper impurities within waveguides, originating from residual contaminants in CMOS-grade silicon wafers that are gettered into silicon nitride during fabrication. By developing effective copper removal techniques, we significantly reduce thermal instabilities. This enables soliton generation with arbitrary or slow laser scanning, removing a key barrier to microcomb deployment. Our approach is compatible with front-end-of-line foundry processing, paving the way for broader adoption of soliton microcomb technologies.

physics.optics↗

arXiv2025

Arrayed waveguide gratings in lithium tantalate integrated photonics

Arrayed Waveguide Gratings (AWGs) are widely used photonic components for splitting and combining different wavelengths of light. They play a key role in wavelength division multiplexing (WDM) systems by enabling efficient routing of multiple data channels over a single optical fiber and as a building block for various optical signal processing, computing, imaging, and spectroscopic applications. Recently, there has been growing interest in integrating AWGs in ferroelectric material platforms, as the platform simultaneously provide efficient electro-optic modulation capability and thus hold the promise for fully integrated WDM transmitters. To date, several demonstrations have been made in the X-cut thin-film lithium niobate ($\mathrm{LiNbO}_3$) platform, yet, the large anisotropy of $\mathrm{LiNbO}_3$ complicates the design and degrades the performance of the AWGs. To address this limitation, we use the recently developed photonic integrated circuits (PICs) based on thin-film lithium tantalate ($\mathrm{LiTaO}_3$), a material with a similar Pockels coefficient as $\mathrm{LiNbO}_3$ but significantly reduced optical anisotropy, as an alternative viable platform. In this work, we manufacture $\mathrm{LiTaO}_3$ AWGs using deep ultraviolet lithography on a wafer-scale. The fabricated AWGs feature a channel spacing of 100 GHz, an insertion loss of < 4 dB and crosstalk of < -14 dB. In addition, we demonstrate a cyclic AWG, as well as a multiplexing and demultiplexing AWG pair for the first time on $\mathrm{LiTaO}_3$ platform. The wafer-scale fabrication of these AWGs not only ensures uniformity and reproducibility, but also paves the way for realizing volume-manufactured integrated WDM transmitters in ferroelectric photonic integrated platforms.

physics.optics↗

arXiv2025

Full C- and L-band tunable erbium-doped integrated lasers via scalable manufacturing

Erbium (Er) ions are the gain medium of choice for fiber-based amplifiers and lasers, offering a long excited-state lifetime, slow gain relaxation, low amplification nonlinearity and noise, and temperature stability compared to semiconductor-based platforms. Recent advances in ultra-low-loss silicon nitride (Si$_3$N$_4$) photonic integrated circuits, combined with ion implantation, have enabled the realization of high-power on-chip Er amplifiers and lasers with performance comparable to fiber-based counterparts, supporting compact photonic systems. Yet, these results are limited by the high (2 MeV) implantation beam energy required for tightly confined Si$_3$N$_4$ waveguides (700 nm height), preventing volume manufacturing of Er-doped photonic integrated circuits. Here, we overcome these limitations and demonstrate the first fully wafer-scale, foundry-compatible Er-doped photonic integrated circuit-based tunable lasers. Using 200 nm-thick Si$_3$N$_4$ waveguides, we reduce the ion beam energy requirement to below 500 keV, enabling efficient wafer-scale implantation with an industrial 300 mm ion implanter. We demonstrate a laser wavelength tuning range of 91 nm, covering nearly the entire optical C- and L-bands, with fiber-coupled output power reaching 36 mW and an intrinsic linewidth of 95 Hz. The temperature-insensitive properties of erbium ions allowed stable laser operation up to 125$^{\circ}$C and lasing with less than 15 MHz drift for over 6 hours at room temperature using a remote fiber pump. The fully scalable, low-cost fabrication of Er-doped waveguide lasers opens the door for widespread adoption in coherent communications, LiDAR, microwave photonics, optical frequency synthesis, and free-space communications.

physics.optics↗

arXiv2024

Optical Arbitrary Waveform Generation (OAWG) Using Actively Phase-Stabilized Spectral Stitching

The conventional way of generating optical waveforms relies on the in-phase and quadrature (IQ) modulation of a continuous wave (CW) laser tone. In this case, the bandwidth of the resulting optical waveform is limited by the underlying electronic components, in particular by the digital-to-analog converters (DACs) generating the drive signals for the IQ modulator. This bandwidth bottleneck can be overcome by using a concept known as optical arbitrary waveform generation (OAWG), where multiple IQ modulators and DACs are operated in parallel to first synthesize individual spectral slices, which are subsequently combined to form a single ultra-broadband arbitrary optical waveform. However, targeted synthesis of arbitrary optical waveforms from multiple spectral slices has so far been hampered by difficulties to maintain the correct optical phase relationship between the slices. In this paper, we propose and demonstrate spectrally sliced OAWG with active phase stabilization, which permits targeted synthesis of truly arbitrary optical waveforms. We demonstrate the viability of the scheme by synthesizing optical waveforms with record-high bandwidths of up to 325 GHz from four individually generated optical tributaries. In a proof-of-concept experiment, we use the OAWG system to generate 32QAM data signals at symbol rates of up to 320 GBd, which we transmit over 87 km of single-mode fiber and receive by a two-channel non-sliced optical arbitrary waveform measurement (OAWM) system, achieving excellent signal quality. We believe that our scheme can unlock the full potential of OAWG and disrupt a wide range of applications in high-speed optical communications, photonic-electronic digital-to-analog conversion, as well as advanced test and measurement in science and industry.

physics.optics↗

arXiv2024

Ultrabroadband thin-film lithium tantalate modulator for high-speed communications

The continuous growth of global data traffic over the past three decades, along with advances in disaggregated computing architectures, presents significant challenges for optical transceivers in communication networks and high-performance computing systems. Specifically, there is a growing need to significantly increase data rates while reducing energy consumption and cost. High-performance optical modulators based on materials such as InP, thin-film lithium niobate (LiNbO3), or plasmonics have been developed, with LiNbO3 excelling in high-speed and low-voltage modulation. Nonetheless, the widespread industrial adoption of thin film LiNbO3 remains compounded by the rather high cost of the underlying 'on insulator' substrates -- in sharp contrast to silicon photonics, which can benefit from strong synergies with high-volume applications in conventional microelectronics. Here, we demonstrate an integrated 110 GHz modulator using thin-film lithium tantalate (LiTaO3) -- a material platform that is already commercially used for millimeter-wave filters and that can hence build upon technological and economic synergies with existing high-volume applications to offer scalable low-cost manufacturing. We show that the LiTaO3 photonic integrated circuit based modulator can support 176 GBd PAM8 transmission at net data rates exceeding 400 Gbit/s. Moreover, we show that using silver electrodes can reduce microwave losses compared to previously employed gold electrodes. Our demonstration positions LiTaO3 modulator as a novel and highly promising integration platform for next-generation high-speed, energy-efficient, and cost-effective transceivers.

physics.optics↗

arXiv2024

Integrated Triply Resonant Electro-Optic Frequency Comb in Lithium Tantalate

Integrated frequency comb generators based on Kerr parametric oscillation have led to chip-scale, gigahertz-spaced combs with new applications spanning hyperscale telecommunications, low-noise microwave synthesis, LiDAR, and astrophysical spectrometer calibration. Recent progress in lithium niobate (LN) photonic integrated circuits (PICs) has resulted in chip-scale electro-optic (EO) frequency combs, offering precise comb-line positioning and simple operation without relying on the formation of dissipative Kerr solitons. However, current integrated EO combs face limited spectral coverage due to the large microwave power required to drive the non-resonant capacitive electrodes and the strong intrinsic birefringence of Lithium Niobate. Here, we overcome both challenges with an integrated triply resonant architecture, combining monolithic microwave integrated circuits (MMICs) with PICs based on the recently emerged thin-film lithium tantalate. With resonantly enhanced EO interaction and reduced birefringence in Lithium Tantalate, we achieve a four-fold comb span extension and a 16-fold power reduction compared to the conventional non-resonant microwave design. Driven by a hybrid-integrated laser diode, the comb spans over 450nm (60THz) with >2000 lines, and the generator fits within a compact 1cm^2 footprint. We additionally observe that the strong EO coupling leads to an increased comb existence range approaching the full free spectral range of the optical microresonator. The ultra-broadband comb generator, combined with detuning-agnostic operation, could advance chip-scale spectrometry and ultra-low-noise millimeter wave synthesis and unlock octave-spanning EO combs. The methodology of co-designing microwave and optical resonators can be extended to a wide range of integrated electro-optics applications.

physics.optics↗

arXiv2024

Piezoelectric actuation for integrated photonics

Recent decades have seen significant advancements in integrated photonics, driven by improvements in nanofabrication technology. This field has developed from integrated semiconductor lasers and low-loss waveguides to optical modulators, enabling the creation of sophisticated optical systems on a chip scale capable of performing complex functions like optical sensing, signal processing, and metrology. The tight confinement of optical modes in photonic waveguides further enhances the optical nonlinearity, leading to a variety of nonlinear optical phenomena such as optical frequency combs, second-harmonic generation, and supercontinuum generation. Active tuning of photonic circuits is crucial not only for offsetting variations caused by fabrication in large-scale integration, but also serves as a fundamental component in programmable photonic circuits. Piezoelectric actuation in photonic devices offers a low-power, high-speed solution and is essential in the design of future photonic circuits due to its compatibility with materials like Si and Si3N4, which do not exhibit electro-optic effects. Here, we provide a detailed review of the latest developments in piezoelectric tuning and modulation, by examining various piezoelectric materials, actuator designs tailored to specific applications, and the capabilities and limitations of current technologies. Additionally, we explore the extensive applications enabled by piezoelectric actuators, including tunable lasers, frequency combs, quantum transducers, and optical isolators. These innovative ways of managing photon propagation and frequency on-chip are expected to be highly sought after in the future advancements of advanced photonic chips for both classical and quantum optical information processing and computing.

physics.optics↗

arXiv2023

Fundamental charge noise in electro-optic photonic integrated circuits

Understanding thermodynamical measurement noise is of central importance for electrical and optical precision measurements from mass-fabricated semiconductor sensors, where the Brownian motion of charge carriers poses limits, to optical reference cavities for atomic clocks or gravitational wave detection, which are limited by thermorefractive and thermoelastic noise due to the transduction of temperature fluctuations to the refractive index and length fluctuations. Here, we discover that unexpectedly charge carrier density fluctuations give rise to a novel noise process in recently emerged electro-optic photonic integrated circuits. We show that Lithium Niobate and Lithium Tantalate photonic integrated microresonators exhibit an unexpected Flicker type (i.e. $1/f^{1.2}$) scaling in their noise properties, significantly deviating from the well-established thermorefractive noise theory. We show that this noise is consistent with thermodynamical charge noise, which leads to electrical field fluctuations that are transduced via the strong Pockels effects of electro-optic materials. Our results establish electrical Johnson-Nyquist noise as the fundamental limitation for Pockels integrated photonics, crucial for determining performance limits for both classical and quantum devices, ranging from ultra-fast tunable and low-noise lasers, Pockels soliton microcombs, to quantum transduction, squeezed light or entangled photon-pair generation. Equally, this observation offers optical methods to probe mesoscopic charge fluctuations with exceptional precision.

physics.optics↗

arXiv2023

Lithium tantalate electro-optical photonic integrated circuits for high volume manufacturing

Photonic integrated circuits based on Lithium Niobate have demonstrated the vast capabilities afforded by material with a high Pockels coefficient, allowing linear and high-speed modulators operating at CMOS voltage levels for applications ranging from data-center communications and photonic accelerators for AI. However despite major progress, the industrial adoption of this technology is compounded by the high cost per wafer. Here we overcome this challenge and demonstrate a photonic platform that satisfies the dichotomy of allowing scalable manufacturing at low cost, while at the same time exhibiting equal, and superior properties to those of Lithium Niobate. We demonstrate that it is possible to manufacture low loss photonic integrated circuits using Lithium Tantalate, a material that is already commercially adopted for acoustic filters in 5G and 6G. We show that LiTaO3 posses equally attractive optical properties and can be etched with high precision and negligible residues using DUV lithography, diamond like carbon (DLC) as a hard mask and alkaline wet etching. Using this approach we demonstrate microresonators with an intrinsic cavity linewidth of 26.8 MHz, corresponding to a linear loss of 5.6 dB/m and demonstrate a Mach Zehnder modulator with Vpi L = 4.2 V cm half-wave voltage length product. In comparison to Lithium Niobate, the photonic integrated circuits based on LiTaO3 exhibit a much lower birefringence, allowing high-density circuits and broadband operation over all telecommunication bands (O to L band), exhibit higher photorefractive damage threshold, and lower microwave loss tangent. Moreover, we show that the platform supports generation of soliton microcombs in X-Cut LiTaO3 racetrack microresonator with electronically detectable repetition rate, i.e. 30.1 GHz.

physics.optics↗

arXiv2023

Photonic-electronic integrated circuit-based coherent LiDAR engine

Microelectronic integration is a key enabler for the ubiquitous deployment of devices in large volumes ranging from MEMS and imaging sensors to consumer electronics. Such integration has also been achieved in photonics, where compact optical transceivers for data centers employ co-integrated photonic and electronic components. Chip-scale integration is of particular interest to coherent laser ranging i.e. frequency modulated continuous wave (FMCW LiDAR), a perception technology that benefits from instantaneous velocity and distance detection, eye-safe operation, long-range and immunity to interference. Full wafer-scale integration of this technology has been compounded by the stringent requirements on the lasers, requiring high optical coherence, low chirp nonlinearity and requiring optical amplifiers. Here, we overcome this challenge and demonstrate a photonic-electronic integrated circuit-based coherent LiDAR engine, that combined all functionalities using fully foundry-compatible wafer scale manufacturing. It is comprised of a micro-electronic based high voltage arbitrary waveform generator, a hybrid photonic circuit based tunable Vernier laser with piezoelectric actuators, and an erbium-doped waveguide optical amplifier - all realized in a wafer scale manufacturing compatible process that comprises III-V semiconductors, SiN silicon nitride photonic integrated circuits as well as 130nm SiGe BiCMOS technology. The source is a turnkey, linearization-free, and can serve as a 'drop-in' solution in any FMCW LiDAR, that can be seamlessly integrated with an existing focal plane and optical phased array LiDAR approaches, constituting a missing step towards a fully chip-scale integrated LiDAR system.

physics.app-ph↗

arXiv2023

Hertz-linewidth and frequency-agile photonic integrated extended-DBR lasers

Recent advances in the development of ultra-low loss silicon nitride (Si3N4)-based photonic integrated circuits have allowed integrated lasers to achieve a coherence exceeding those of fiber lasers and enabled unprecedentedly fast (Megahertz bandwidth) tuning using monolithically integrated piezoelectrical actuators. While this marks the first time that fiber laser coherence is achieved using photonic integrated circuits, in conjunction with frequency agility that exceeds those of legacy bulk lasers, the approach is presently compounded by the high cost of manufacturing DFB, as required for self-injection locking, as well as the precise control over the laser current and temperature to sustain a low noise locked operation. Reflective semiconductor optical amplifiers (RSOA) provide a cost-effective alternative solution but have not yet achieved similar performance in coherence or frequency agility, as required for frequency modulated continuous wave (FMCW) LiDAR, laser locking in frequency metrology or wavelength modulation spectroscopy for gas sensing. Here, we overcome this challenge and demonstrate an RSOA-based and frequency agile integrated laser tuned with high speed, good linearity, high optical output power, and turn-key operability while maintaining a small footprint. This is achieved using a tunable extended distributed Bragg reflector (E-DBR) in an ultra-low loss 200 nm thin Si3N4 platform with monolithically integrated piezoelectric actuators. We co-integrate the DBR with a compact ultra-low loss spiral resonator to further reduce the intrinsic optical linewidth of the laser to the Hertz level -- on par with the noise of a fiber laser -- via self-injection locking.

physics.optics↗

arXiv2023

A fully hybrid integrated Erbium-based laser

Erbium-doped fiber lasers exhibit high coherence and low noise as required for applications in fiber optic sensing, gyroscopes, LiDAR, and optical frequency metrology. Endowing Erbium-based gain in photonic integrated circuits can provide a basis for miniaturizing low-noise fiber lasers to chip-scale form factor, and enable large-volume applications. Yet, while major progress has been made in the last decade on integrated lasers based on silicon photonics with III-V gain media, the integration of Erbium lasers on chip has been compounded by large laser linewidth. Recent advances in photonic integrated circuit-based high-power Erbium-doped amplifiers, make a new class of rare-earth-ion-based lasers possible. Here, we demonstrate a fully integrated chip-scale Erbium laser that achieves high power, narrow linewidth, frequency agility, and the integration of a III-V pump laser. The laser circuit is based on an Erbium-implanted ultralow-loss silicon nitride Si$_3$N$4$ photonic integrated circuit. This device achieves single-mode lasing with a free-running intrinsic linewidth of 50 Hz, a relative intensity noise of $<$-150 dBc/Hz at $>$10 MHz offset, and output power up to 17 mW, approaching the performance of fiber lasers and state-of-the-art semiconductor extended cavity lasers. An intra-cavity microring-based Vernier filter enables wavelength tunability of $>$ 40 nm within the C- and L-bands while attaining side mode suppression ratio (SMSR) of $>$ 70 dB, surpassing legacy fiber lasers in tuning and SMRS performance. This new class of low-noise, tuneable Erbium waveguide laser could find applications in LiDAR, microwave photonics, optical frequency synthesis, and free-space communications. Our approach is extendable to other wavelengths, and more broadly, constitutes a novel way to photonic integrated circuit-based rare-earth-ion-doped lasers.

physics.optics↗

arXiv2023

Slice-Less Optical Arbitrary Waveform Measurement (OAWM) in a Bandwidth of More than 600 GHz Using Soliton Microcombs

We propose and demonstrate a novel scheme for optical arbitrary waveform measurement (OAWM) that exploits chip-scale Kerr soliton combs as highly scalable multiwavelength local oscillators (LO) for ultra-broadband full-field waveform acquisition. In contrast to earlier concepts, our approach does not require any optical slicing filters and thus lends itself to efficient implementation on state-of-the-art high-index-contrast integration platforms such as silicon photonics. The scheme allows to measure truly arbitrary waveforms with high accuracy, based on a dedicated system model which is calibrated by means of a femtosecond laser with known pulse shape. We demonstrated the viability of the approach in a proof-of-concept experiment by capturing an optical waveform that contains multiple 16 QAM and 64 QAM wavelength-division multiplexed (WDM) data signals with symbol rates of up to 80 GBd, reaching overall line rates of up to 1.92 Tbit/s within an optical acquisition bandwidth of 610 GHz. To the best of our knowledge, this is the highest bandwidth that has so far been demonstrated in an OAWM experiment.

physics.optics↗

arXiv2023

Frequency agile photonic integrated external cavity laser

Recent advances in the development of ultra-low loss silicon nitride integrated photonic circuits have heralded a new generation of integrated lasers capable of reaching fiber laser coherence. However, these devices presently are based on self-injection locking of distributed feedback (DFB) laser diodes, increasing both the cost and requiring tuning of laser setpoints for their operation. In contrast, turn-key legacy laser systems use reflective semiconductor optical amplifiers (RSOA). While this scheme has been utilized for integrated photonics-based lasers, so far, no cost-effective RSOA-based integrated lasers exist that are low noise and simultaneously feature fast, mode-hop-free and linear frequency tuning as required for frequency modulated continuous wave (FMCW) LiDAR or for laser locking in frequency metrology. Here we overcome this challenge and demonstrate a RSOA-based, frequency agile integrated laser, that can be tuned with high speed, with high linearity at low power. This is achieved using monolithic integration of piezoelectrical actuators on ultra-low loss silicon nitride photonic integrated circuits in a Vernier filter-based laser scheme. The laser operates at 1550 nm, features 6 mW output power, 400 Hz intrinsic laser linewidth, and allows ultrafast wavelength switching within 7 ns rise time and 75 nW power consumption. In addition, we demonstrate the suitability for FMCW LiDAR by showing laser frequency tuning over 1.5 GHz at 100 kHz triangular chirp rate with nonlinearity of 0.25% after linearization, and use the source for measuring a target scene 10 m away with a 8.5 cm distance resolution.

physics.optics↗

arXiv2022

Ultrafast tunable lasers using lithium niobate integrated photonics

Recent advances in the processing of thin-film LNOI have enabled low-loss photonic integrated circuits, modulators with improved half-wave voltage, electro-optic frequency combs and novel on-chip electro-optic devices, with applications ranging from 5G telecommunication and microwave photonics to microwave-to-optical quantum interfaces. Lithium niobate integrated photonic circuits could equally be the basis of integrated narrow-linewidth frequency-agile lasers. Pioneering work on polished lithium niobate crystal resonators has led to the development of electrically tunable narrow-linewidth lasers. Here we report low-noise frequency-agile lasers based on lithium niobate integrated photonics and demonstrate their use for coherent laser ranging. This is achieved through heterogeneous integration of ultra-low-loss silicon nitride photonic circuits with thin-film lithium niobate via direct wafer bonding. This platform features low propagation loss of 8.5 dB/m enabling narrow-linewidth lasing (intrinsic linewidth of 3 kHz) by self-injection locking to a III-V semiconductor laser diode. The hybrid mode of the resonator allows electro-optical laser frequency tuning at a speed of 12 PHz/s with high linearity, low hysteresis and while retaining narrow linewidth. Using this hybrid integrated laser, we perform a proof-of-concept FMCW LiDAR ranging experiment, with a resolution of 15 cm. By fully leveraging the high electro-optic coefficient of lithium niobate, with further improvements in photonic integrated circuits design, these devices can operate with CMOS-compatible voltages, or achieve mm-scale distance resolution. Endowing low loss silicon nitride integrated photonics with lithium niobate, gives a platform with wide transparency window, that can be used to realize ultrafast tunable lasers from the visible to the mid-infrared, with applications from OCT and LiDAR to environmental sensing.

physics.optics↗

arXiv2022

Near ultraviolet photonic integrated lasers based on silicon nitride

Low phase noise lasers based on the combination of III-V semiconductors and silicon photonics are well established in the near-infrared spectral regime. Recent advances in the development of low-loss silicon nitride-based photonic integrated resonators have allowed to outperform bulk external diode and fiber lasers in both phase noise and frequency agility in the 1550 nm-telecommunication window. Here, we demonstrate for the first time a hybrid integrated laser composed of a gallium nitride (GaN) based laser diode and a silicon nitride photonic chip-based microresonator operating at record low wavelengths as low as 410 nm in the near-ultraviolet wavelength region suitable for addressing atomic transitions of atoms and ions used in atomic clocks, quantum computing, or for underwater LiDAR. Using self-injection locking to a high Q (0.4 $\times$ 10$^6$) photonic integrated microresonator we observe a phase noise reduction of the Fabry-Pérot laser at 461 nm by a factor greater than 100$\times$, limited by the device quality factor and back-reflection.

physics.optics↗

arXiv2021

Platicon microcomb generation using laser self-injection locking

The past decade has witnessed major advances in the development of microresonator-based frequency combs (microcombs) that are broadband optical frequency combs with repetition rates in the millimeter-wave to microwave domain. Integrated microcombs can be manufactured using wafer-scale process and have been applied in numerous applications. Most of these advances are based on the harnessing of dissipative Kerr solitons (DKS) in optical microresonators with anomalous group velocity dispersion (GVD). However, microcombs can also be generated with normal GVD using dissipative localized structures that are referred to as "dark pulse", "switching wave" or "platicon". Importantly, as most materials feature intrinsic normal GVD, the requirement of dispersion engineering is significantly relaxed for platicon generation. Therefore while DKS microcombs require particular designs and fabrication processes, platicon microcombs can be readily built using standard CMOS-compatible platforms such as thin-film (i.e. typically below 300 nm) Si3N4. Yet laser self-injection locking that has been recently used to create highly compact integrated DKS microcomb modules has not been demonstrated for platicons. Here we report the first fully integrated platicon microcomb operating at a microwave-K-band repetition rate. Using laser self-injection locking of a DFB laser edge-coupled to a Si3N4 microresonator, platicons are electrically initiated and stably maintained, enabling a compact microcomb module without any complex control. We further characterize the phase noise of the platicon repetition rate and the pumping laser. The observation of self-injection-locked platicons facilitates future wide adoption of microcombs as a build-in block in standard photonic integrated architectures via commercial foundry service.

physics.optics↗

arXiv2021

Ultralow-noise frequency-agile photonic integrated lasers

Low-noise lasers are of central importance in a wide variety of applications, including high spectral-efficiency coherent communication protocols, distributed fibre sensing, and long distance coherent LiDAR. In addition to low phase noise, frequency agility, that is, the ability to achieve high-bandwidth actuation of the laser frequency, is imperative for triangular chirping in frequency-modulated continuous-wave (FMCW) based ranging or any optical phase locking as routinely used in metrology. While integrated silicon-based lasers have experienced major advances and are now employed on a commercial scale in data centers, integrated lasers with sub-100 Hz-level intrinsic linewidth are based on optical feedback from photonic circuits that lack frequency agility. Here, we demonstrate a wafer-scale-manufacturing-compatible hybrid photonic integrated laser that exhibits ultralow intrinsic linewidth of 25 Hz while offering unsurpassed megahertz actuation bandwidth, with a tuning range larger than 1 GHz. Our approach uses ultralow-loss (1 dB/m) Si$_3$N$_4$ photonic microresonators, combined with aluminium nitride (AlN) or lead zirconium titanate (PZT) microelectromechanical systems (MEMS) based stress-optic actuation. Electrically driven low-phase noise lasing is attained by self-injection locking of an Indium Phosphide (InP) laser chip and only limited by fundamental thermo-refractive noise. By utilizing difference drive and apodization of the photonic chip, a flat actuation response up to 10 MHz is achieved. We leverage this capability to demonstrate a compact coherent LiDAR engine that can generate up to 800 kHz FMCW triangular optical chirp signals, requiring neither any active linearization nor predistortion compensation, and perform a 10 m optical ranging experiment, with a resolution of 12.5 cm.

physics.optics↗