arXiv subjects

Guang-Wei Deng

Publications and source records attributed to Guang-Wei Deng.

28 records · Page 2Linked to original sources

arXiv2017

Coupling graphene nanomechanical motion to a single-electron transistor

Graphene-based electromechanical resonators have attracted much interest recently because of the outstanding mechanical and electrical properties of graphene and their various applications. However, the coupling between mechanical motion and charge transport has not been explored in graphene. Here, we studied the mechanical properties of a suspended 50-nm-wide graphene nanoribbon, which also acts as a single-electron transistor (SET) at low temperature. Using the SET as a sensitive detector, we found that the resonance frequency could be tuned from 82 MHz to 100 MHz and the quality factor exceeded 30000. The strong charge-mechanical coupling was demonstrated by observing the SET induced ~140 kHz resonance frequency shifts and mechanical damping. We also found that the SET can enhance the nonlinearity of the resonator. Our SET-coupled graphene mechanical resonator could approach an ultra-sensitive mass resolution of ~0.55*10^(-21) g and a force sensitivity of ~1.9*10^(-19) N/(Hz)^(1/2), and can be further improved. These properties indicate that our device is a good platform both for fundamental physical studies and potential applications.

cond-mat.mes-hall↗

arXiv2017

Quantum dot behavior in transition metal dichalcogenides nanostructures

Recently, transition metal dichalcogenides (TMDCs) semiconductors have been utilized for investigating quantum phenomena because of their unique band structures and novel electronic properties. In a quantum dot (QD), electrons are confined in all lateral dimensions, offering the possibility for detailed investigation and controlled manipulation of individual quantum systems. Beyond the definition of graphene QDs by opening an energy gap in nanoconstrictions, with the presence of a bandgap, gate-defined QDs can be achieved on TMDCs semiconductors. In this paper, we review the confinement and transport of QDs in TMDCs nanostructures. The fabrication techniques for demonstrating two-dimensional (2D) materials nanostructures such as field-effect transistors and QDs, mainly based on e-beam lithography and transfer assembly techniques are discussed. Subsequently, we focus on transport through TMDCs nanostructures and QDs. With steady improvement in nanoscale materials characterization and using graphene as a springboard, 2D materials offer a platform that allows creation of heterostructure QDs integrated with a variety of crystals, each of which has entirely unique physical properties.

cond-mat.mes-hall↗

arXiv2017

Coherent phonon Rabi oscillations with a high frequency carbon nanotube phonon cavity

Phonon-cavity electromechanics allows the manipulation of mechanical oscillations similar to photon-cavity systems. Many advances on this subject have been achieved in various materials. In addition, the coherent phonon transfer (phonon Rabi oscillations) between the phonon cavity mode and another oscillation mode has attracted many interest in nano-science. Here we demonstrate coherent phonon transfer in a carbon nanotube phonon-cavity system with two mechanical modes exhibiting strong dynamical coupling. The gate-tunable phonon oscillation modes are manipulated and detected by extending the red-detuned pump idea of photonic cavity electromechanics. The first- and second-order coherent phonon transfers are observed with Rabi frequencies 591 kHz and 125 kHz, respectively. The frequency quality factor product fQ_m~2=10^12 Hz achieved here is larger thank k_B T_base/h, which may enable the future realization of Rabi oscillations in the quantum regime.

cond-mat.mes-hall↗

arXiv2016

Parametric strong mode-coupling in carbon nanotube mechanical resonators

Carbon nanotubes (CNTs) have attracted much attention for use in nanomechanical devices because of their exceptional properties, such as large resonant frequencies, low mass, and high quality factors. Here, we report the first experimental realization of parametric strong coupling between two mechanical modes on a single CNT nanomechanical resonator, by applying an extra microwave pump. This parametric pump method can be used to couple mechanical modes with arbitrary frequency differences. The properties of the mechanical resonator are detected by single-electron tunneling at low temperature, which is found to be strongly coupled to both modes. The coupling strength between the two modes can be tuned by the pump power, setting the coupling regime from weak to strong. This tunability may be useful in further phonon manipulations in carbon nanotubes.

cond-mat.mes-hall↗

arXiv2016

Charge Number Dependence of the Dephasing Rates of a Graphene Double Quantum Dot in a Circuit QED Architecture

We use an on-chip superconducting resonator as a sensitive meter to probe the properties of graphene double quantum dots at microwave frequencies. Specifically, we investigate the charge dephasing rates in a circuit quantum electrodynamics architecture. The dephasing rates strongly depend on the number of charges in the dots, and the variation has a period of four charges, over an extended range of charge numbers. Although the exact mechanism of this fourfold periodicity in dephasing rates is an open problem, our observations hint at the fourfold degeneracy expected in graphene from its spin and valley degrees of freedom.

cond-mat.mes-hall↗

arXiv2016

Strongly-coupled nanotube electromechanical resonators

Coupling an electromechanical resonator with carbon-nanotube quantum dots is a significant method to control both the electronic charge and the spin quantum states. By exploiting a novel micro-transfer technique, we fabricate two strongly-coupled and electrically-tunable mechanical resonators on a single carbon nanotube for the first time. The frequency of the two resonators can be individually tuned by the bottom gates, and strong coupling is observed between the electron charge and phonon modes of each resonator. Furthermore, the conductance of either resonator can be nonlocally modulated by the phonon modes in the other resonator. Strong coupling is observed between the phonon modes of the two resonators, which provides an effective long distance electron-electron interaction. The generation of phonon-mediated-spin entanglement is also theoretically analyzed for the two resonators. This strongly-coupled nanotube electromechanical resonator array provides an experimental platform for future studies of the coherent electron-phonon interaction, the phonon mediated long-distance electron interaction, and entanglement state generation.

cond-mat.mes-hall↗

arXiv2014

Introduction of DC line structures into a superconducting microwave 3D cavity

We report a technique that can noninvasively add multiple DC wires into a 3D superconducting microwave cavity for electronic devices that require DC electrical terminals. We studied the influence of our DC lines on the cavity performance systematically. We found that the quality factor of the cavity is reduced if any of the components of the electrical wires cross the cavity equipotential planes. Using this technique, we were able to incorporate a quantum dot (QD) device into a 3D cavity. We then controlled and measured the QD transport signal using the DC lines. We have also studied the heating effects of the QD by the microwave photons in the cavity.

cond-mat.mes-hall↗

arXiv2014

Coupling two distant double quantum dots to a microwave resonator

With recent advances in the circuit quantum electrodynamics (cQED) architecture, hybrid systems that couple nano-devices to microwave resonators have been developing rapidly. Here we report an experimental demonstration of two graphene double quantum dots (DQDs) coupled over a distance of up to 60 μm, through a microwave resonator. We jointly measure the two DQDs' coupling to the resonator, which causes a nonlinear response in the resonator reflection amplitude in the vicinity of the degeneracy points of the two DQDs. This phenomenon is explained by the Tavis-Cummings (T-C) mode. We further characterize this nonlocal coupling by measuring the correlation between the DC currents in the two DQDs. This correlation is observed to be strongly dependent on the average photon number in the resonator. Our results explore T-C physics in electronic transport, and also contribute to the study of nonlocal transport and future implementations of remote electronic entanglement.

cond-mat.mes-hall↗

arXiv2013

Symmetric reflection line resonator for semiconductor circuit quantum electrodynamics

We have designed and fabricated a half-wavelength reflection line resonator (RLR) that consists of a pair of two coupled microstrip lines on a GaAs/AlGaAs heterostructure. By changing the top gate voltage on a square of two dimensional electron gas under the resonator, a large range of the quality factors can be obtained. Energy loss in the two-dimensional electron gas can be minimized, thus realizing a versatile resonator suitable for integration with semiconductor quantum circuits.

cond-mat.mes-hall↗

arXiv2010

Equivalent Circuit Description of Non-compensated n-p Codoped TiO2 as Intermediate Band Solar Cells

The novel concept of non-compensated n-p codoping has made it possible to create tunable intermediate bands in the intrinsic band gap of TiO2, making the codoped TiO2 a promising material for developing intermediate band solar cells (IBSCs). Here we investigate the quantum efficiency of such IBSCs within two scenarios - with and without current extracted from the extended intermediate band. Using the ideal equivalent circuit model, we find that the maximum efficiency of 57% in the first scenario and 53% in the second are both much higher than the Shockley-Queisser limit from single gap solar cells. We also obtain various key quantities of the circuits, a useful step in realistic development of TiO2 based solar cells invoking device integration. These equivalent circuit results are also compared with the efficiencies obtained directly from consideration of electron transition between the energy bands, and both approaches reveal the intriguing existence of double peaks in the maximum quantum efficiency as a function of the relative location of IBs.

cond-mat.mtrl-sci↗