arXiv subjects

Gudrid Moortgat-Pick

Publications and source records attributed to Gudrid Moortgat-Pick.

At least 55 records · Page 3Linked to original sources

arXiv2020

Updated status of the undulator-based ILC positron source

The design of the positron source for the International Linear Collider (ILC) is still under discussion. The baseline design plans to use the high-energy electron beam for the positron production before it goes to the IP. The electrons pass a long helical undulator and generate an intense circularly polarized photon beam which hits a thin conversion target to produce $e^+e^-$ pairs. The resulting positron beam is longitudinally polarized which provides an important benefit for precision physics analyses at the ILC. In this paper the status of the positron target design studies is presented. Focus is the positron yield for center-of-mass energies of 250 GeV and also the Z peak. Possibilities to improve the positron collection system and thus to increase the positron yield are discussed.

physics.acc-ph↗

arXiv2020

Energy Deposition due to Secondary Particles in The Helical Undulator Wall at ILC-250GeV

In the future, International Linear Collider (ILC), a helical undulator based polarized positron source is expected to be chosen. A high energy electron beam passes through a superconducting helical undulator in order to create circularly polarized photons which will be directed to a conversion target, the result of which, will be electron-positron pairs. The resulting positron beam is longitudinally polarized. In order to produce the required number of positrons in ILC250 the full undulator length is needed. Since the photons are created with an opening angle and traveling through a 320 m long undulator, it is expected that the superconducting undulator vacuum will be hit by the photons. Photon masks are needed to be inserted in the undulator line to keep the power deposition in the vacuum below the acceptable limit which is 1W/m. A detailed study of the power deposition in the vacuum and masks is needed in order to design the photon masks. This paper describes the power deposition in the undulator vacuum due to secondary particles assuming an ideal undulator. In addition, the mask model is proposed.

physics.acc-ph↗

arXiv2019

Status of the undulator-based ILC positron source

The design of the positron source for the International Linear Collider (ILC) is still under consideration. The baseline design plans to use the electron beam for the positron production before it goes to the IP. The high-energy electrons pass a long helical undulator and generate an intense circularly polarized photon beam which hits a thin conversion target to produce $e^+e^-$ pairs. The resulting positron beam is longitudinally polarized which provides an important benefit for precision physics analyses. In this paper the status of the design studies is presented with focus on ILC250. In particular, the target design and cooling as well as issues of the optical matching device are important for the positron yield. Some possibilities to optimize the system are discussed.

physics.acc-ph↗

arXiv2019

Energy Deposition along The Helical Undulator at ILC-250GeV

The positron source of the International Linear Collider is based on a superconducting helical undulator passed by the high-energy electron beam to generate photons which hit a conversion target. Since the photons are circularly polarized the resulting positron beam is polarized. At ILC250, the full undulator is needed to produce the required number of positrons. To keep the power deposition in the undulator walls below the acceptable limit of 1W/m, photon masks must be inserted in the undulator line. The photon mask design requires a detailed study of the power deposition in the walls and masks. This paper describes the power deposition in the undulator wall due to synchrotron radiation.

physics.acc-ph↗

arXiv2019

Optimization of Undulator Parameters for 125 GeV Drive Beam

In the baseline design of the International Linear Collider (ILC) an undulator-based source is foreseen for the positron source in order to match the physics requirements. The baseline parameters are optimized for the ILC at sqrt(s)=500 GeV, that means an electron drive beam of 250 GeV. Precision measurements in the Higgs sector, however, require measurements at sqrt(s)=250 GeV, i.e. running with the electron drive beam only at 125 GeV, which imposes a challenge for achieving a high yield. Therefore the baseline undulator parameters have to be optimized as much as possible within their technical performances. In this bachelor thesis we therefore present a theoretical study on the radiation spectra of a helical undulator, based on the equation for the radiated synchrotron energy spectral density per solid angle per electron in the relativistic, far-field and point-like charge approximation. From this starting point the following undulator properties are examined: the deposited power in the undulator vessel, which can disrupt the functionality of the undulator magnets, the protective property of a mask on this disturbances and the number of positrons produced by the synchrotron radiation in a Ti6Al4V target. Those quantities were evaluated for various values for parameters as undulator period, undulator length and magnetic flux in order to find optimal baseline parameter sets for sqrt(s)=250 GeV.

physics.acc-ph↗

arXiv2019

Phenomenology of the inflation-inspired NMSSM at the electroweak scale

The concept of Higgs inflation can be elegantly incorporated in the Next-to-Minimal Supersymmetric Standard Model (NMSSM). A linear combination of the two Higgs-doublet fields plays the role of the inflaton which is non-minimally coupled to gravity. This non-minimal coupling appears in the low-energy effective superpotential and changes the phenomenology at the electroweak scale. While the field content of the inflation-inspired model is the same as in the NMSSM, there is another contribution to the $μ$ term in addition to the vacuum expectation value of the singlet. We explore this extended parameter space and point out scenarios with phenomenological differences compared to the pure NMSSM. A special focus is set on the electroweak vacuum stability and the parameter dependence of the Higgs and neutralino sectors. We highlight regions which yield a SM-like $125\,$GeV Higgs boson compatible with the experimental observations and are in accordance with the limits from searches for additional Higgs bosons. Finally, we study the impact of the non-minimal coupling to gravity on the Higgs mixing and in turn on the decays of the Higgs bosons in this model.

hep-ph↗

arXiv2018

Phenomenological consequences of Higgs inflation in the NMSSM at the electroweak scale

The Next-to-Minimal Supersymmetric Standard Model (NMSSM) can incorporate inflation, where a combination of the Higgs-doublet fields plays the role of the inflaton. At the high scale, the Higgs doublets are non-minimally coupled to supergravity; this coupling appears as an additional contribution to the $μ$ term in the low-energy effective superpotential and potentially changes physics at the electroweak scale. In a recent publication, we investigate the extended parameter space of this model with respect to collider phenomenology at the electroweak scale, and discuss scenarios which are potentially different from the pure NMSSM. We analyse the stability of the electroweak vacuum, the masses of neutralinos/charginos and Higgs bosons as well as the mixing and decays of Higgs bosons. Some important aspects of this study are described in the following.

hep-ph↗

arXiv2018

The fate of the Littlest Higgs with T-parity under 13 TeV LHC data

Little Higgs models - which can most easily be thought of as a variant of composite Higgs models - explain a light Higgs boson at 125 GeV as an pseudo-Nambu-Goldstone boson of a spontaneously broken global symmetry. The mechanism of collective symmetry breaking shifts the UV scale of these models to the 10 TeV scale and higher. T-parity is introduced as a discrete symmetry to remove tree-level constraints on the electroweak precision data. Still after run 1 of LHC, electroweak precision observables gave stronger constraints than Higgs data and direct searches. We present a full recast of all available 13 TeV searches from LHC run 2 to show that now direct searches supersede electroweak precision observables. The latest exclusion limits on the LHT model will be presented, as well as an outlook on the full high-luminosity phase of LHC.

hep-ph↗

arXiv2018

Euclidean mirrors: enhanced vacuum decay from reflected instantons

We study the tunneling of virtual matter-antimatter pairs from the quantum vacuum in the presence of a spatially uniform, time-dependent electric background composed of a strong, slow field superimposed with a weak, rapid field. After analytic continuation to Euclidean spacetime, we obtain from the instanton equations two critical points. While one of them is the closing point of the instanton path, the other serves as an Euclidean mirror which reflects and squeezes the instanton. It is this reflection and shrinking which is responsible for an enormous enhancement of the vacuum pair production rate. We discuss how important features of two different mechanisms can be analysed and understood via such a rotation in the complex plane. a) Consistent with previous studies, we first discuss the standard assisted mechanism with a static strong field and certain weak fields with a distinct pole structure in order to show that the reflection takes place exactly at the poles. We also discuss the effect of possible sub-cycle structures. We extend this reflection picture then to weak fields which have no poles present and illustrate the effective reflections with explicit examples. An additional field strength dependence for the rate occurs in such cases. We analytically compute the characteristic threshold for the assisted mechanism given by the critical combined Keldysh parameter. We discuss significant differences between these two types of fields. For various backgrounds, we present the contributing instantons and perform analytical computations for the corresponding rates treating both fields nonperturbatively. b) In addition, we also study the case with a nonstatic strong field which gives rise to the assisted dynamical mechanism. For different strong field profiles we investigate the impact on the critical combined Keldysh parameter. [...]

hep-th↗

arXiv2018

Optimising the ILC Setup: Physics Programme, Running Scenarios and Design Choices

A high-energy $e^+e^-$ Linear Collider has been considered since a long time as an important complement to the LHC. Unprecedented precision measurements as well as the exploration of so far untouched phase space for direct production of new particles will provide unique information to advance the limits of our understanding of our universe. Within this project, the physics prospects of such a collider as well as their interplay with design of the accelerator and the detectors have been investigated in a quantitative way. This kind of study required a close collaboration between theory and experiment, always taking into account results of the LHC and other relevant experiments. In this article we will summarize some of the most important developments and results, covering all core areas of the physics progamme of future $e^+e^-$ colliders.

hep-ph↗

arXiv2018

The ILC positron target cooled by thermal radiation

The design of the conversion target for the undulator-based ILC positron source is still under development. One important issue is the cooling of the target. Here, the status of the design studies for cooling by thermal radiation is presented.

physics.acc-ph↗

arXiv2018

Undulator-Based Positron Source at 250 GeV CM Energy with Different Optical Matching Devices: Pulsed Flux Concentrator and Quarter Wave Transformer

In the baseline design of the International Linear Collider (ILC) an undulator-based source is foreseen for the positron source. In this study the energy deposition in the pulsed flux concentrator (FC) of positron source is calculated for the ILC at 250 GeV center-of-mass energy. The peak energy of 33 J/g deposited by one beam pulse in the current design of the FC is above the limit for copper material. Several promising options were considered to solve the issue of overheating the FC: the quarter wave transformer (QWT) has a significantly bigger aperture and is considered as an valuable and safe alternative for the FC. Since the positron source with a QWT is expected to lead to a lower positron capture efficiency, also the expected positron yield was calculated in addition to the energy deposition in QWT.

physics.acc-ph↗

arXiv2018

Automatised ILC-Bounds on Dark Matter Models with CheckMATE

The public collider phenomenology computing tool CheckMATE (Check Models at Terascale Energies) was originally designed to allow theorists to quickly test their favourite BSM models against various existing LHC analyses performed by ATLAS and CMS. It offers an automatised chain of Monte Carlo event generation, detector simulation, event analysis and statistical evaluation so that it can automatically determine whether a given parameter point of a BSM model is excluded or not. Currently, it contains more than 50 individual ATLAS or CMS analyses whose several hundred signal regions target various final states as they typically appear in theories beyond the Standard Model. In this study, we extend this functionality to allow sensitivity studies for the International Linear Collider. As an example, we implemente a dark matter monophoton search and use it to analyse three benchmark scenarios with different assumptions about the interaction between dark matter and Standard Model particles. We determine the ILC sensitivity expected for a $\sqrt{s} =$ 500 GeV, $L = 500$ fb$^{-1}$and compare the results for the cases of completely unpolarised beams and for individual lepton polarisation settings.

hep-ph↗

arXiv2018

The fate of the Littlest Higgs Model with T-parity under 13 TeV LHC Data

We exploit all LHC available Run 2 data at center-of-mass energies of 8 and 13 TeV for searches for physics beyond the Standard Model. We scrutinize the allowed parameter space of Little Higgs models with the concrete symmetry of T-parity by providing comprehensive analyses of all relevant production channels of heavy vectors, top partners, heavy quarks and heavy leptons and all phenomenologically relevant decay channels. Constraints on the model will be derived from the signatures of jets and missing energy or leptons and missing energy. Besides the symmetric case, we also study the case of T-parity violation. Furthermore, we give an extrapolation to the LHC high-luminosity phase at 14 TeV as well.

hep-ph↗

arXiv2018

The role of positron polarization for the inital $250$ GeV stage of the International Linear Collider

The International Linear Collider is now proposed with a staged machine design, with the first stage at $\sqrt{s}=$~250 GeV and an integrated luminosity goal of 2~ab$^{-1}$. One of the questions for the machine design is the importance of positron polarization. In this report, we review the impact of positron polarization on the physics goals of the $250$ GeV stage of the ILC and demonstrate that positron polarization has distinct advantages.

hep-ph↗

arXiv2017

Quantum tunnelling from vacuum in multidimensions

The tunnelling of virtual matter-antimatter pairs from the quantum vacuum in multidimensions is studied. We consider electric backgrounds as a linear combination of a spatial Sauter field and, interchangeably, certain weaker time dependent fields without poles in the complex plane such as the sinusoidal and Gaussian cases. Based on recent geometric considerations within the worldline formalism, we employ the relevant critical points in order to analytically estimate a characteristic threshold for the temporal inhomogeneity. We set appropriate initial conditions and apply additional symmetry constraints in order to determine the classical periodic paths in spacetime. Using these worldline instantons, we compute the corresponding leading order exponential factors showing large dynamical enhancement in general. We work out the main differences caused by the analytic structure of such composite backgrounds and also discuss the case with a strong temporal variation of Sauter-type.

hep-th↗

arXiv2016

Nonlinear lepton-photon interactions in external background fields

Nonlinear phenomena of lepton-photon interactions in external backgrounds with a generalised periodic plane-wave geometry are studied. We discuss nonlinear Compton scattering in head-on lepton-photon collisions extended properly to beyond the soft-photon regime. In addition, our results are applied to stimulated lepton-antilepton pair production in photon collisions with unrestricted energies. Derivations are considered semi-classically based on unperturbed fermionic Volkov representations encoding the full interaction with the background field. Closed expressions for total probabilities considering S-matrix elements have been derived. The general formula is applied to Compton scattering by an electron propagating in an external laser-like background. We obtain additive contributions in the extended unconstrained result which turns out to be stringently required in the highly nonlinear regime. A detailed comparison of contributing harmonics is discussed for various field parameters.

hep-ph↗

arXiv2015

Probing the top-quark width through ratios of resonance contributions of $e^+e^-\rightarrow W^+W^-b\bar{b}$

We exploit offshell regions in the process $e^+e^-\rightarrow W^+W^-b\bar{b}$ to gain access to the top-quark width. Working at next-to-leading order in QCD we show that carefully selected ratios of offshell regions to onshell regions in the reconstructed top and antitop invariant mass spectra are, \emph{independently} of the coupling $g_{tbW}$, sensitive to the top-quark width. We explore this approach for different centre of mass energies and initial-state beam polarisations at $e^+e^-$ colliders and briefly comment on the applicability of this method for a measurement of the top-quark width at the LHC.

hep-ph↗